Antibiotic protected silver nanoparticles for microbicidal cotton

Surface coating of metal nanoparticles is one of the major aspects to be optimized in the design of antimicrobial nanoparticles. The novelty of this work is that antimicrobial derivatives have been used as stabilizers to protect silver nanoparticles (Ag NPs). Microbicidal activity studies of fabricated cotton textiles coated with these Ag@Antibio were performed. Protective ligand layers of Ag NPs resulted to be a deterministic factor in their antimicrobial activity. The best bactericidal activity was obtained for Fabric TAM (coated with Ag NPs with triarylmethane derivates in surface, Ag@TAMSH), with a bacterial decrease of 3 log units for the S. aureus strain. Intrinsic antibiotic activity and partial positive charge of the TAMSH probably enhanced their antimicrobial effects. Fabric Eu (coated with Ag NPs with eugenol derivates in surface, Ag@EugenolSH) and Fabric FQPEG (coated with Ag NPs embedded in PEG-fluoroquinolone derivatives in surface, Ag@FQPEG) displayed antibacterial activity for both Staphylococcus aureus and Pseudomonas aeruginosa strains. These coated antimicrobial cotton fabrics can be applied in different medical textiles.     

Antioxidant and antibacterial activity of silver nanoparticles biosynthesized using Chenopodium murale leaf extract

Silver is known for its antimicrobial effects and silver nanoparticles are gaining their importance due to their antimicrobial activities. The aims of the current study were to use plant extract for the biosynthesis of silver nanoparticles and to evaluate their antibacterial and antioxidant activity in vitro. The results indicated that silver nanoparticles (AgNPs) can be synthesized in a simple method using Chenopodium murale leaf extract. The TEM analysis showed that the sizes of the synthesized AgNps ranged from 30 to 50 nm. The essential oil of C. murale leaf extract was formed mainly of α-Terpinene, (Z)-Ascaridole and cis-Ascaridole. The total phenolic compounds and total flavonides were higher in AgNPs-containing plant extract compared to the plant extract. AgNPs-containing leaf extract showed a higher antioxidant and antimicrobial activity compared to C. murale leaf extract alone or silver nitrate. It could be concluded that C. murale leaf extract can be used effectively in the production of potential antioxidant and antimicrobial AgNPs for commercial application.     

Sonochemical coating of paper by microbiocidal silver nanoparticles

Colloidal silver has gained wide acceptance as an antimicrobial agent, and various substrates coated with nanosilver such as fabrics, plastics, and metal have been shown to develop antimicrobial properties. Here, a simple method to develop coating of colloidal silver on paper using ultrasonic radiation is presented, and the coatings are characterized using X-ray diffraction (XRD), high resolution scanning electron microscope (HRSEM), and thermogravimetry (TGA) measurements. Depending on the variables such as precursor concentrations and ultrasonication time, uniform coatings ranging from 90 to 150 nm in thickness have been achieved. Focused ion beam (FIB) cross section imaging measurements revealed that silver nanoparticles penetrated the paper surface to a depth of more than 1 μm, resulting in highly stable coatings. The coated paper demonstrated antibacterial activity against E. coli and S. aureus, suggesting its potential application as a food packing material for longer shelf life.     

Preparation,Antibacterial, and Antioxidant Activities of Silver/Chitosan Composites

Hybrid silver/chitosan composites were prepared and transmission electron microscopy (TEM) exhibited that silver nanoparticles were embedded in chitosan. The antibacterial activities of these composites were screened against Escherichia coli, Salmonella choleraesuis, Staphylococcus aureus, and Bacillus subtilis, which were much higher than that of chitosan. The TEM images of the treated bacteria showed that silver nanoparticles adhered to the bacterial cell surface and entered the interior of the cell, assuming that silver nanoparticles released from silver/chitosan composites could efficiently destroy the cell integrity of bacteria. Moreover, the composites exhibited higher antioxidant activity than chitosan based on the assessment of 2,2-diphenyl-1-picrylhydrazyl and hydroxyl radical scavenging and reducing power.     

Preparation and characterization of polyethersulfone/silver nanocomposite ultrafiltration membrane for antibacterial applications

Antimicrobial ultrafiltration membranes were prepared by coating silver nanoparticles on the surface of polyethersulfone (PES) membranes which were fabricated via phase inversion induced by the immersion precipitation technique, and their morphology and performance were compared with the antimicrobial PES membranes synthesized by adding the silver nanoparticles into the casting solution during the phase inversion process. For this purpose, stable and uniform colloidal solutions of the silver nanoparticles were prepared by chemical reduction of silver salt using fructose and dimethylformamide as a reducing agent. The silver nanoparticles were characterized by ultraviolet–visible spectroscopy, X‐ray powder diffraction and dynamic light scattering analysis. The morphology and surface properties of the prepared membranes were examined by field emission scanning electron microscopy and atomic force microscopy analysis. Moreover, the separation properties, antimicrobial efficiency and amount of silver release from the PES nanocomposite membranes during the cross flow ultrafiltration were determined. The results indicated that the silver content of the coated PES membranes was greater than the membranes fabricated by the solution blending method. Also, the permeation flux of the silver‐coated membranes was similar to the neat PES membranes, while the membranes prepared by the second approach had less flux. The membranes synthesized by both coating and blending methods showed high antimicrobial and bactericidal activity against gram‐negative bacteria such as Escherichia coli and gram‐positive bacteria such as Staphylococcus aureus. Finally, the prepared antimicrobial membranes were successfully used for the ultrafiltration of raw milk to reduce the microbial load during the concentration process. Copyright © 2014 John Wiley & Sons, Ltd.     

Antibacterial activity of glutathione-coated silver nanoparticles against Gram positive and Gram negative bacteria

In the present paper, we study the mechanism of antibacterial activity of glutathione (GSH) coated silver nanoparticles (Ag NPs) on model Gram negative and Gram positive bacterial strains. Interference in bacterial cell replication is observed for both cellular strains when exposed to GSH stabilized colloidal silver in solution, and microbicidal activity was studied when GSH coated Ag NPs are (i) dispersed in colloidal suspensions or (ii) grafted on thiol-functionalized glass surfaces. The obtained results confirm that the effect of dispersed GSH capped Ag NPs (GSH Ag NPs) on Escherichia coli is more intense because it can be associated with the penetration of the colloid into the cytoplasm, with the subsequent local interaction of silver with cell components causing damages to the cells. Conversely, for Staphylococcus aureus, since the thick peptidoglycan layer of the cell wall prevents the penetration of the NPs inside the cytoplasm, the antimicrobial effect is limited and seems related to the interaction with the bacterial surfaces. Experiments on GSH Ag NPs grafted on glass allowed us to elucidate more precisely the antibacterial mechanism, showing that the action is reduced because of GSH coating and the limitation of the translational freedom of NPs.     

Preparation of chitosan nanoparticles by TPP ionic gelation combined with spray drying,and the antibacterial activity of chitosan nanoparticles and a chitosan nanoparticle–amoxicillin complex

Chitosan nanoparticles were prepared from chitosan with various molecular weights by tripolyphosphate (TPP) ionic gelation combined with a spray drying method. The morphologies and characteristics of chitosan nanoparticles were determined by TEM, FE-SEM and from their mean sizes and zeta potentials. The effect of chitosan molecular weight (130, 276, 760 and 1200 cPs) and size of spray dryer nozzle (4.0, 5.5 and 7.0 µm) on mean size, size distribution and zeta potential values of chitosan nanoparticles was investigated. The results showed that the mean size of chitosan nanoparticles was in the range of 166–1230 nm and the zeta potential value ranged from 34.9 to 59 mV, depending on the molecular weight of chitosan and size of the spray dryer nozzles. The lower the molecular weight of chitosan, the smaller the size of the chitosan nanoparticles and the higher the zeta potential. A test for the antibacterial activity of chitosan nanoparticles (only) and a chitosan nanoparticle–amoxicillin complex against Streptococcus pneumoniae was also conducted. The results indicated that a smaller chitosan nanoparticle and higher zeta potential showed higher antibacterial activity. The chitosan nanoparticle–amoxicillin complex resulted in improved antibacterial activity as compared to amoxicillin and chitosan nanopaticles alone. Using a chitosan nanoparticle–amoxicillin complex could reduce by three times the dosage of amoxicillin while still completely inhibiting S. pneumoniae.     

Electrospun chitosan-coated fibers of poly(L-lactide) and poly(L-lactide)/poly(ethylene glycol): preparation and characterization

Fibrous poly(L-lactide) (PLLA) and bicomponent PLLA/poly(ethylene glycol) mats were prepared by electrospinning and then were coated with chitosan. The presence of chitosan coating was proved by scanning electron microscopy and by fluorescence microscopy. On contact with blood, the chitosan coating led to changes in erythrocyte shape and in their aggregation. The haemostatic activity of the mats increased with increasing chitosan content. Microbiological studies against Staphylococcus aureus revealed that the chitosan coating imparts antibacterial activity to the hybrid mats. The combined haemostatic and antibacterial activities render these novel materials suitable for wound-healing applications.     

Silver bromide nanoparticle/polymer composites: dual action tunable antimicrobial materials

We present a simple method of fabricating highly potent dual action antibacterial composites consisting of a cationic polymer matrix and embedded silver bromide nanoparticles. A simple and novel technique of on-site precipitation of AgBr was used to synthesize the polymer/nanoparticle composites. The synthesized composites have potent antibacterial activity toward both gram-positive and gram-negative bacteria. The materials form good coatings on surfaces and kill both airborne and waterborne bacteria. Surfaces coated with these composites resist biofilm formation. These composites are different from other silver-containing antibacterial materials both in the ease of synthesis and in the use of a silver salt nanoparticle instead of elemental silver or complex silver compounds. We also demonstrate the ability to tune the release of biocidal Ag(+) ions from these composites by controlling the size of the embedded AgBr nanoparticles. These composites are potentially useful as antimicrobial coatings in a wide variety of biomedical and general use applications.     

Green synthesis of chitosan-stabilized silver-colloidal nanoparticles immobilized on white-silica-gel beads and the antibacterial activities in a simulated-air-filter

This study explored the green synthesis and immobilization of colloidal silver nanoparticles (AgNPs) on a solid compatible support. Its antibacterial properties in reusable air filters are also discussed. The chitosan stabilized colloidal AgNPs (chi-AgNPs) were prepared using visible light irradiation in methanol. The UV–Vis, FTIR spectra, and TEM confirmed the chi-AgNPs formation. The immobilization technique of chi-AgNPs on the surface of white-silica-gel beads, which was previously coated chitosan (chi-SiG), was effective. The immobilized silver particles (AgNPs-[chi-SiG]) were solid, stable, dispersed, and nano-size. Both AgNPs-[chi-SiG] and chi-SiG exhibited antibacterial properties and prevented the growth of Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria in agar media. Air filter containing the AgNPs-[chi-SiG] showed high antibacterial activity against Bacillus subtilis in the air.     

Improved antibacterial properties of an Mg‐Zn‐Ca alloy coated with chitosan nanofibers incorporating silver sulfadiazine multiwall carbon nanotubes for bone implants

Bacteria‐caused infection remains an issue in the treatment of bone defects by means of Mg‐Zn‐Ca alloy implants. This study aimed to improve the antibacterial properties of an Mg‐Zn‐Ca alloy by coating with chitosan‐based nanofibers with incorporated silver sulfadiazine (AgSD) and multiwall carbon nanotubes (MWCNTs). AgSD and MWCNTs were prepared at a weight ratio of 1:1 and then added to chitosan at varying concentrations (ie, 0, 0.25, 0.5, and 1.5 wt.%) to form composites. The obtained composites were ejected in nanofiber form using an electrospinning technique and coated on the surface of an Mg‐Zn‐Ca alloy to improve its antibacterial properties. A microstructural examination by scanning electron microscopy (SEM) revealed the diameter of chitosan nanofiber ejected increased with the concentration of AgSD‐MWCNTs. The incorporation of AgSD‐MWCNTs into the chitosan nanofibers was confirmed by Fourier transform infrared spectroscopy (FTIR). Examination of the antibacterial activity shows that chitosan nanofibers with AgSD‐MWCNTs can significantly inhibit the growth and infiltration of Escherichia coli and Staphylococcus aureus. Biocompatibility assay and cell morphology observations demonstrate that AgSD‐MWCNTs incorporated into nanofibers are cytocompatible. Taken together, the results of this study demonstrate the potential application of electrospun chitosan with AgSD‐MWCNTs as an antibacterial coating on Mg‐Zn‐Ca alloy implants for bone treatment.     

壳聚糖改性织物中原位合成银纳米粒子

采用壳聚糖改性棉和涤纶织物,通过织物表面的壳聚糖原位吸附、还原银离子制备了纳米银抗菌织物.用场发射扫描电子显微镜(SEM)、X射线能谱(EDA)、X射线粉末衍射仪(XRD)和反射光谱等对纳米银织物进行了表征,研究了银离子浓度和壳聚糖浓度对纳米银织物的影响,并检测了纳米银织物的抗菌性能.结果表明,在无需任何还原剂的条件下,壳聚糖改性的棉和涤纶织物表面可以均匀地形成银纳米粒子,晶粒大小为5~10 nm,所制备的纳米银织物均具有优异的抗菌性能.     

Antibacterial effect of silver nanoparticles prepared in bipolymers at moderate temperature

The purpose of this study was to investigate the antibacterial effect of silver nanoparticles in chitosan–poly(ethylene glycol) suspension. The silver nanoparticles (AgNPs) were prepared by use of an environmentally benign method from chitosan (Cts) and poly(ethylene glycol) (PEG) at moderate temperature and with stirring for different times. Silver nitrate (AgNO₃) was used as the metal precursor and Cts and PEG were used as solid support and polymeric stabilizer, respectively. The antibacterial activity of silver–chitosan–poly(ethylene glycol) nanocomposites (Ag–Cts–PEG NCs) against Staphylococcus aureus, Micrococcus luteum, Pseudomonas aeruginosa, and Escherichia coli was tested by use of the Mueller–Hinton agar disk-diffusion method. Formation of AgNPs was determined by UV–visible spectroscopy; surface plasmon absorption maxima were observed at 415–430 nm in the UV–visible spectrum. The peaks in the XRD pattern confirmed that the AgNPs had a face-centered cubic structure; peaks of contaminated crystalline phases were not observed. Transmission electron microscopy (TEM) revealed that the AgNPs synthesized were spherical. The optimum stirring time for synthesis of the smallest particle size (mean diameter 5.50 nm) was 12 h. The AgNPs in Cts–PEG were effective against all the bacteria tested. Higher antibacterial activity was observed for AgNPs with smaller size. These results suggest that AgNPs can be used as an effective inhibitor of bacteria and can be used in medical applications. These results also suggest that AgNPs were successfully synthesized in Cts–PEG suspension at moderate temperature with different stirring times.     

Synthesis of copolymer-stabilized silver nanoparticles for coating materials

Silver ions being less toxic than silver nanoparticles, a more safe material can be obtained to be used as antimicrobial coating. This can be achieved by using thiol chemistry and covalently attach the silver nanoparticles in the coating. Our aim is to produce a coating having antimicrobial properties of silver ions but with the silver nanoparticles firmly attached in the coating. Here, we present a way to produce silver nanoparticles that can be used as a component in a coating or as such to produce an antimicrobial coating. The silver nanoparticles presented here are stabilized by a copolymer (poly(butyl acrylate–methyl methacrylate)) that is soft and has well-known good film-producing properties. The reversible addition-fragmentation chain transfer radical polymerization technique used to prepare the polymers provides conveniently a thiol group for effective binding of the silver nanoparticles to the polymers and thus to the coating.     

Development of antimicrobial cotton fabric using bionanocomposites

In order to provide antimicrobial activity to cotton, cotton fabrics were treated by montmorillonite (KSF), montmorillonite–dihydroxy ethylene urea (KSF–MDEU), KSF–chitosan (CS) and KSF–CS–MDEU solutions containing 12.5, 25 and 50 ppm silver ion. The effect of modification on the antibacterial activity of cotton fabrics was also evaluated after 10 cycles of washings. MDEU exhibited better antimicrobial activities after washing process. By using 25 ppm silver, KSF and CS modification solution, good performance in terms of antibacterial activity was obtained. The addition of CS and MDEU increased the whiteness index values of cotton fabrics treated with KSF containing different silver concentrations. The characterization of modified cotton samples was done by Fourier transform infrared spectroscopy, X-ray diffraction analysis, inductively coupled plasma-mass spectroscopy, scanning electron microscopy and thermogravimetric analysis.     

Antibacterial properties of novel poly(methyl methacrylate) nanofiber containing silver nanoparticles

Poly(methyl methacrylate) (PMMA) nanofiber containing silver nanoparticles was synthesized by radical-mediated dispersion polymerization and applied to an antibacterial agent. UV-vis spectroscopic analysis indicated that the silver nanoparticles were continually released from the polymer nanofiber in aqueous solution. The antibacterial properties of silver/PMMA nanofiber against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria were evaluated using minimum inhibitory concentration (MIC), the modified Kirby-Bauer method, and a kinetic test. The MIC test demonstrated that the silver/PMMA nanofiber had enhanced antimicrobial efficacy compared to that of silver sulfadiazine and silver nitrate at the same silver concentration.     

Antibacterial activity of silver bionanocomposites synthesized by chemical reduction route

ABSTRACT: BACKGROUND: The aim of this study is to investigate the functions of polymers and size of nanoparticles on the antibacterial activity of silver bionanocomposites (Ag BNCs). In this research, silver nanoparticles (Ag NPs) were incorporated into biodegradable polymers that are chitosan, gelatin and both polymers via chemical reduction method in solvent in order to produce Ag BNCs. Silver nitrate and sodium borohydride were employed as a metal precursor and reducing agent respectively. On the other hand, chitosan and gelatin were added as a polymeric matrix and stabilizer. The antibacterial activity of different sizes of silver nanoparticles was investigated against Gram-positive and Gram-negative bacteria by the disk diffusion method using Mueller-Hinton Agar. RESULTS: The properties of Ag BNCs were studied as a function of the polymer weight ratio in relation to the use of chitosan and gelatin. The morphology of the Ag BNCs films and the distribution of the Ag NPs were also characterized. The diameters of the Ag NPs were measured and their size is less than 20 nm. The antibacterial trait of silver/chitosan/gelatin bionanocomposites was investigated. The silver ions released from the Ag BNCs and their antibacterial activities were scrutinized. The antibacterial activities of the Ag BNC films were examined against Gram-negative bacteria (E. coli and P. aeruginosa) and Gram-positive (S. aureus and M. luteus) by diffusion method using Muller-Hinton agar. CONCLUSIONS: The antibacterial activity of Ag NPs with size less than 20 nm was demonstrated and showed positive results against Gram-negative and Gram-positive bacteria. The Ag NPs stabilized well in the polymers matrix.     

Antibacterial activity of pH‐sensitive genipin cross‐linked chitosan/poly(ethylene glycol)/silver nanocomposites

Novel nanocomposites consisting of genipin cross‐linked chitosan (GC), poly(ethylene glycol) (PEG), and silver nanoparticles were prepared for such biomedical applications as the wound‐healing materials. Various amounts of silver nanoparticles were dispersed in the GC/PEG hydrogel matrix without severe aggregation. The effects of composition and silver nanoparticles on the physico‐chemical properties of samples were evaluated by infrared analysis, contact angle measurements, and swelling tests. The GC/PEG/Ag nanocomposite showed a pH‐sensitive swelling behavior. The surface hydrophilicity of GC/PEG/Ag nanocomposites was improved with the increase of silver nanoparticle content. L929 cell attachment was improved in the presence of silver nanoparticles. The antimicrobial function was assessed for the GC/PEG/Ag nanocomposites containing the silver content over 100 ppm. The silver nanoparticles had the dual functions of reinforcing structural stability and enhancing antimicrobial activity of GC/PEG/Ag nanocomposites. Copyright © 2010 John Wiley & Sons, Ltd.     

Designing a novel type of multifunctional bamboo surface based on an RGO/Ag coating

Super-hydrophobic and fire-retardant coatings have been applied to the bamboo surface. However, it remains a significant challenge to develop coating materials that perform multiple functions simultaneously. In this paper, a novel conductive bamboo timber (RGO@AgBT), coated with reduced graphene oxide (RGO) and silver nanoparticles, was fabricated via a hydrothermal process and a silver mirror reaction process. The RGO@AgBT composites had excellent photo-catalytic activity, meanwhile, the removal rate of rhodamine B (RhB), methylene blue (MB), and methyl orange (MO) after 60 min photo-degradation were 77.6 %, 88.8 %, and 78.4 %, respectively, superior to the raw bamboo timber (BT) and the bamboo timber coated with reduced graphene oxide (RGOBT). The RGO@AgBT samples showed excellent antibacterial performance against Escherichia coli and Staphylococcus aureus. Additionally, the RGO@AgBT samples exhibited improved thermal stability and fire-resistant property with a limiting oxygen index of 30.5 %. Finally, the future directions of multifunctional bamboo research and opportunities for electronic industry application are prospected.     

Antimicrobial Potential of Biosynthesized Silver Nanoparticles by Aaronsohnia factorovskyi Extract

The green biosynthesis of nanoparticles by plant extracts is an attractive and promising technique for medicinal applications. In the current study, we chose one of the daisy plants, Aaronsohnia factorovskyi (which grows in the Najd region, Saudi Arabia), to investigate its anti-microbial efficacy, in combination with silver nanoparticles. The biosynthesized nanoparticles were evaluated for antibacterial activity against Staphylococcus aureus, Bacillus subtilis (Gram-positive), Pseudomonas aeruginosa, and Escherichia coli, (Gram-negative) using the disc diffusion method, while the antifungal activity was assessed against Fusarium oxysporum, Fusarium solani, Helminthosporium rostratum, and Alternaria alternata. The potential phytoconstituents of the plant extracts were identified by Fourier-transform infrared spectroscopy (FT-IR) techniques, the Field emission scanning electron microscopy (FE-SEM), Chromatography/Mass Spectrometry (GC-MS) techniques, and Zeta potential analysis. The current study revealed the ability of the tested plant extract to convert silver ions to silver nanoparticles with an average diameter of 104–140 nm. Biogenic Aaronsohnia factorovskyi-silver nanoparticles (AF-AgNPs) showed significant antibacterial activity against Staphylococcus aureus with inhibition zone diameter to 19.00 ± 2.94 mm, and antifungal activity against Fusarium solani, which reduced the growth of fungal yarn to 1.5 mm. The innovation of the present study is that the green synthesis of NPs, which is simple, cost-effective, provides stable nano-materials, and can be an alternative for the large-scale synthesis of silver nanoparticles.