Vibrational energy transfer from chemically activated 1,4-cyclohexadiene

The thermal isomerization of cis, anti, cis-tricyclo[3.1.0.0^2,4] hexane was used to produce highly vibrationally excited 1,4-cyclohexadiene. The competition between unimolecular decomposition of the energized diene (to benzene and hydrogen) and collisional stabilization was studied using the parent compound, SF₆, CO₂, N₂, and He as quenching gases. Quenching efficiencies decreased in the order given above. By applying RRKM theory to the isomerization and decomposition reactions, it was possible to calculate the step size in a stepladder model of the deactivation of cyclohexadiene. The step sizes 〈ΔE〉 deduced (at 528 K and in units of kJ/mol) were: parent compound and SF₆, 7; CO₂, 5; N₂, 4; He, 2. The study confirmed the utility of this unimolecular chemical activation system for energy transfer studies.     

Non-isothermal Studies on Mechanism And Kinetics of Thermal Decomposition of Cobalt(II) Oxalate Dihydrate

Thermal decomposition of CoC₂O₄⋅2H₂O was studied using DTA, TG, QMS and XRD techniques. It was shown that decomposition generally occurs in two steps: dehydration to anhydrous oxalate and next decomposition to Co and to CoO in two parallel reactions. Two parallel reactions were distinguished using mass spectra data of gaseous products of decomposition. Both reactions run according toAvrami–Erofeev equation. For reaction going to metallic cobalt parameter n=2 and activation energy is 97±14 kJ mol^–1. It was found that decomposition to CoO proceeds in two stages. First stage (0.12<α_II<0.41) proceeds according to n=2, with activation energy 251±15 kJ mol^–1 and second stage (0.45<α_II<0.85) proceeds according to parameter n=1 and activation energy 203±21 kJ mol^–1. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal Decomposition and Dehydration Kinetics of Tetra(piperidinium) Octamolybdate Tetrahydrate in Air

Thermal decomposition of tetra(piperidinium) octamolybdate tetrahydrate, [C₅H₁₀NH₂]₄[Mo₈O₂₆]·4H₂O, was investigated in air by means of TG‐DTG/DTA, DSC, TG‐IR and SEM. TG‐DTG/DTA curves showed that the decomposition proceeded through three well‐defined steps with DTA peaks closely corresponding to mass loss obtained. Kinetics analysis of its dehydration step was performed under non‐isothermal conditions. The dehydration activation energy was calculated through Friedman and Flynn‐Wall‐Ozawa (FWO) methods, and the best‐fit dehydration kinetic model function was estimated through the multiple linear regression method. The activation energy for the dehydration step of [C₅H₁₀NH₂]₄[Mo₈O₂₆]·4H₂O was 139.7 kJ/mol. The solid particles became smaller accompanied by the thermal decomposition of the title compound.     

Comparative Computational Studies of Gaseous Alkali Metal Amidoboranes MNH2BH3 and their Carbon Analogs MC2H5 (M = Li – Cs): Formation and Unimolecular Hydrogen Evolution

Comparative computational studies of reaction mechanisms of formation and unimolecular hydrogen evolution from alkali metal amidoboranes MNH₂BH₃ and their carbon analogs MC₂H₅ (M = Li – Cs) were performed at the B3LYP/def2‐TZVPPD level of theory. Transition states (TS) for the consecutive dehydrogenation reactions were optimized. In contrast to endergonic dehydrogenation of carbon analogs, dehydrogenation reactions of alkali metal amidoboranes are exergonic at room temperature. The nature of the alkali metal does not significantly affect the thermodynamic characteristics and activation energies of unimolecular gas phase dehydrogenation reactions. The influence of the alkali metal is qualitatively similar for amidoboranes and their carbon analogs.     

Thermal and Spectroscopic Studies on the Decomposition of Some Aminoguanidine Nitrates

Diaminoguanidine nitrate (DAGN) and triaminoguanidine nitrate (TAGN),potential energetic materials in emerging propulsion technology with high mass impetus at low isochoric flame temperature have been studied as regards kinetics and mechanism of thermal decomposition using thermogravimetry (TG), differential thermal analysis (DTA),infrared spectroscopy (IR) and hot stage microscopy. Kinetics of thermolysis has been followed by isothermal TG and IR. For the initial stage of thermolysis of DAGN the best linearity with a correlation coefficient of 0.9976 was obtained for the Avrami-Erofe'evequation, n=2, by isothermal TG. The activation energy was found to be 130 kJ mol^–1 and logA=11.4. The initial stage of thermolysis of TAGN also obeyed the Avrami-Erofe'ev equation, n=2, with a correlation coefficient of 0.9975by isothermal TG and the kinetic parameters are E=160.0 kJ mol^–1 and logA=16.0. High temperature IR spectra showed exquisite preferential loss in intensity of the NH₂, NH, N–N stretching and CNN bending. Spectroscopic and other results favour deamination reaction involving the rupture of the N–N bond as the primary step in the thermal decomposition. This revised version was published online in July 2006 with corrections to the Cover Date.     

Kinetics of isothermal decomposition of Cu(II) succinate

The isothermal decomposition of Cu(CH₂COO)₂ has been studied at 473–523 K using material in the form of powder and pellets. The isothermal decomposition of Cu(II) succinate to cupric oxide takes placevia the intermediate formation of 2 CuCO₃·Cu(OH)₂. The X-ray diffraction technique has been employed to identify the decomposition products. The decomposition curves are best fitted by two kinetic stages: (i) a linear law, and (ii) a unimolecular law. The activation energies for the two stages are 153 ± 10 kJ/mole, and 115 ± 8 kJ/mole, respectively. It has been observed that pelleting has no effect on the kinetics. DTG, DTA and TG curves of the sample have also been recorded. The order of reaction has been calculated from these curves.     

双分子水和氨气催化CF3OH分子裂解的理论研究

The G3 and CBS-QB3 theoretical methods are employed to study the decomposition of CF₃OH into FCFO and HF by water, water dimmer, and ammonia. The decomposition of CF₃OH into FCFO and HF is unlikely to occur in the atmosphere due to the high activated energy of 88.7 kJ/mol at the G3 level of theory. However, the computed results predict that the barrier for unimolecular decomposition of CF₃OH is decreased to 25.1 kJ/mol from 188.7 kJ/mol with the aid of NH₃ at the G3 level of theory, which shows that the ammonia play a strong catalytic effect on the split of CF₃OH. In addition, the calculated rate constants show that the decomposition of CF₃OH by NH₃ is faster than those of H₂O and the water dimmer by 109 and 105 times respectively. The rate constants combined with the corresponding concentrations of these species demonstrate that the reaction CF₃OH with NH₃ via TS4 is of great importance for the decomposition of CF₃OH in the atmosphere.     

Hydrogen Promoted Decomposition of Ammonium Dinitramide: an ab initio Molecular Dynamics Study

Thermal decomposition of a famous high oxidizer ammonium dinitramide (ADN) under high temperatures (2000 and 3000 K) was studied by using the ab initio molecular dynamics method.Two different temperature-dependent initial decomposition mechanisms were observed in the unimolecular decomposition of ADN, which were the intramolecular hydrogen transfer and N-NO₂ cleavage in N (NO₂)^-.They were competitive at 2000 K, whereas the former one was predominant at 3000 K.As for the multimolecular decomposition of ADN, four different initial decomposition reactions that were also temperature-dependent were observed.Apart from the aforementioned mechanisms, another two new reactions were the intermolecular hydrogen transfer and direct N-H cleavage in NH₄⁺.At the temperature of 2000 K, the N-NO₂ cleavage competed with the rest three hydrogen-related decomposition reactions, while the direct N-H cleavage in NH₄⁺ was predominant at 3000 K.After the initial decomposition, it was found that the temperature increase could facilitate the decomposition of ADN, and would not change the key decomposition events.ADN decomposed into small molecules by hydrogen-promoted simple, fast and direct chemical bonds cleavage without forming any large intermediates that may impede the decomposition.The main decomposition products at 2000 and 3000 K were the same, which were NH₃, NO₂, NO, N₂O, N₂, H₂O, and HNO₂.     

Kinetics of the thermal decomposition of [Co(NH3)6]2(C2O4)3·4H2O

The thermal decomposition of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O was studied under isothermal conditions in flowing air and argon. Dissociation of the above complex occurs in three stages. The kinetics of the particular stages thermal decomposition have been evaluated. The R_N and/or A_M models were selected as those best fitting the experimental TG curves. The activation energies,E, and lnA were calculated with a conventional procedure and by a new method suggested by Kogaet al. [10, 11]. Comparison of the results have showed that the Arrhenius parameters values estimated by the use of both methods are very close. The calculated activation energies were in air: 96 kJ mol^–1 (R_1.575, stage I); 101 kJ mol^–1 (Ain1.725 stage II); 185 kJ mol^–1 (A _2.9, stage III) and in argon: 66 kJ mol^–1 (A _1.25, stage I); 87 kJ mol^–1 (A _1.825, stage II); 133 kJ mol^–1 (A _2.525, stage III).     

Kinetics and thermodynamics of thermal decomposition of NH<Subscript>4</Subscript>NiPO<Subscript>4</Subscript>·6H<Subscript>2</Subscript>O

The single phase NH₄NiPO₄·6H₂O was synthesized by solid-state reaction at room temperature using NiSO₄·6H₂O and (NH₄)₃PO₄·3H₂O as raw materials. XRD analysis showed that NH₄NiPO₄·6H₂O was a compound with orthorhombic structure. The thermal process of NH₄NiPO₄·6H₂O experienced three steps, which involves the dehydration of the five crystal water molecules at first, and then deamination, dehydration of the one crystal water, intramolecular dehydration of the protonated phosphate groups together, at last crystallization of Ni₂P₂O₇. In the DTA curve, the two endothermic peaks and an exothermic peak, respectively, corresponding to the first two steps’ mass loss of NH₄NiPO₄·6H₂O and crystallization of Ni₂P₂O₇. Based on Flynn–Wall–Ozawa equation, and Kissinger equation, the average values of the activation energies associated with the thermal decomposition of NH₄NiPO₄·6H₂O, and crystallization of Ni₂P₂O₇ were determined to be 47.81, 90.18, and 640.09 kJ mol⁻¹, respectively. Dehydration of the five crystal water molecules of NH₄NiPO₄·6H₂O, and deamination, dehydration of the crystal water of NH₄NiPO₄·H₂O, intramolecular dehydration of the protonated phosphate group from NiHPO₄ together could be multi-step reaction mechanisms. Besides, the thermodynamic parameters (ΔH ^≠, ΔG ^≠, and ΔS ^≠) of the decomposition reaction of NH₄NiPO₄·6H₂O were determined.     

Very low-pressure pyrolysis (VLPP) of hex-1-ene. Kinetics of the retro-ene decomposition of a mono-olefin

The thermal unimolecular decomposition of hex-1-ene has been investigated over the temperature range of 915–1153 K using the technique of very low-pressure pyrolysis (VLPP). The reaction proceeds via the competitive pathways of C₃?C₄ fission and retro-ene elimination, with the latter dominant at low temperatures and the former at high temperatures. This behavior results in an isokinetic temperature of 1035 K under VLPP conditions (both reactions in the unimolecular falloff regime). RRKM calculations, generalized to take into account two competing pathways, show that the experimental unimolecular rate constants are consistent with the high-pressure Arrhenius parameters given by log k₁ (sec^?1) = (12.6 ± 0.2) -(57.7 ± 1.5)/θ for retro-ene reaction, and log k₂ (sec^?1) = (15.9 ± 0.2) - (70.8 ± 1.0)/θ for C-C fission, where θ = 2.303 RT kcal/mol. The A factors were assigned from the results of a recent shock-tube study of the decomposition in the high-pressure regime, and the activation energies were found by matching the RRKM calculations to the VLPP data. The parameters for C-C fission are consistent with the known thermochemistry of n-propyl and allyl radicals. A clear measure of the importance of the molecular pathway in the decomposition of a mono-olefin has been obtained.     

Characterization,correlation and kinetics of dolomite samples as outlined by thermal methods

In this study, the decomposition behavior of four dolomite samples of different origin was studied by X-ray diffractometer and simultaneous TG-DTA experiments. Three different decomposition regions were determined known as dehydration of inter-particle water, formation of MgO and calcite and decomposition of calcite. Kinetic analysis of these decomposition regions was analyzed and the related activation energies are determined. It was observed that the activation energies were in the range of 48–137 kJ mol⁻¹.     

环丙沙星-钨硅多金属氧酸盐的制备及热分解动力学

A new polyoxometalate （CPFX·HCl）3H4SiW12O40·10H2O was prepared from ciprofloxacin hydrochloride and H4SiW12O40·nH2O in aqueous solution, and characterized by elemental analysis, IR spectra and DTA-TG-DTG techniques. The IR spectrum confirmed the presence of Keggin structure and the characteristic functional group for ciprofloxacin in the compound. The TG-DTA-DTG curves showed that its thermal decomposition was a four-step process consisting of simultaneous collapse of Keggin type structure. The residue of decomposition was the mixture of WO3 and SiO2, confirmed by X-ray diffraction and IR spectroscopy. The decomposition mechanism and nonisothermal kinetic parameters of the polyoxometalate were obtained from an analysis to the TG-DTG curves by the single scanning methods （the Achar method and Coats-Redfern method） and the multiple scanning methods （the Kissinger method, Flynn-Wall-Ozawa method and Starink method）. The results indicate that the kinetic equationswith parameters describing the thermal decomposition reaction are dα/dt=6.65×10^6[3（1-α）^2/3]e^-10495.5/T with E=87.26 kJ/mol and A=6.65×10^6 s^-1 for the second step,dα/dt=7.01×10^9（1-α）e^-18770.7/T with E=156.06 kJ/mol and A=7.01×10^9 s^-1 for the third step,dα/dt=9.77×10^43[（1-α）^2]e^-88980.0/T with E=739.78 kJ/mol and A=9.77×10^43 s^-1 for the fourth step.     

Kinetics of decomposition of alkylammonium salts

The thermogravimetric curves of di-n-propylammonium, di-iso-propylammonium, di-n-butylammonium and di-iso-butylammonium chlorides showed similar profiles, characterized by mass loss in only one stage, corresponding to decomposition of compounds. The following thermal stability order was obtained: [Bu₂ ⁿNH₂]Cl>[Pr₂ ⁿNH₂]Cl>[Pr₂ ⁱNH₂]Cl>[Bu₂ ⁱNH₂]Cl. The values of activation energy for non-isothermal data obtained by Ozawa and Coats-Redfern integral methods were in agreement and stability order obtained by thermogravimetry were reproduced in both methods. The decomposition reactions of [Pr₂ ⁿNH₂]Cl, [Pr₂ ⁱNH₂]Cl and [Bu₂ ⁱNH₂]Cl were better described by A3 model and [Bu₂ ⁿNH₂]Cl by A2 model. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermochemistry of the Decomposition of Some Cobalt Compounds

Differential scanning calorimetry (DSC) was used to determine the molar enthalpies of dehydration and decomposition of CoC₂O₄·2H₂O, Co(HCOO)₂·2H₂O and [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O. The first stage of dissociation of each compound is a single-step dehydration both in air and argon atmospheres. The next stages are decomposition processes influenced by experimental parameters. The enthalpies of dehydration and decomposition vary from compound to compound in each atmosphere. The obtained data have been related to the macromechanisms proposed for the thermal decomposition and the parallel-consecutive decomposition-oxidation processes. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal stability of amino acids

Thermal decomposition of L-α-amino acids RCH₂(NH₂)COOH where R = Me₂CH, Me₂CHCH₂, MeEtCH, and C₆H₅CH₂ was studied at temperatures below the melting points of their crystals. From the effective rate constants of the first order reactions energy parameters in the Arrhenius equation were calculated. Correlations between the reaction rate constants k _R and the inductive constants σ* of substituents R and also between the rate constants of the reactions and the dipole moments of amino acids was established. Value of ρ* parameter +8.8 in the Taft equation indicates the heterolytic mechanism of transformation of the amino acids. Chromato-mass spectrometric analysis of decomposition products shows that condensation, decarboxylation, and deamination of the amino acids take place.     

Anharmonic Effect of the Unimolecular Isomerization/Decomposition of Benzyne

The anharmonic and harmonic rate constants were calculated for the unimolecular decomposition of o‐benzyne, the isomerization of o‐benzyne to m‐benzyne, the isomerization of m‐benzyne to p‐benzyne and unimolecular decomposition of p‐benzyne by using the Rice–Ramsperger–Kassel–Marcus (RRKM) theory respectively, in the canonical and microcanonical systems. The geometry and the vibrational frequencies were calculated by MP2 and B3LYP methods with 6‐311G(d,p) basis set and the barrier energies were corrected using CBS‐QB3 theory. The anharmonic effect on the reactions was also examined. Comparison of results for the decompositions of benzyne indicate that both in microcanonical and canonical cases, the anharmonic effect on the decomposition of the o‐C₆H₄ and p‐C₆H₄ are significant, while the anharmonic effect on the two isomerizations are not pronounced.     

The gas-phase elimination kinetics of 2-hydroxy-2-methylbutyric acid and 2-ethyl-2-hydroxybutyric acid

The elimination kinetics of the title compounds have been examined over the temperature range of 270–320°C and pressure range of 19–117 torr. The reactions, carried out in seasoned vessels, with the free-radical suppressor toluene always present, are homogeneous, unimolecular, and follow a first-order rate law. The products of 2-hydroxy-2-methylbutyric acid are 2-butanone, CO, and H₂O; while of 2-ethyl-2-hydroxybutyric acid are 3-pentanone, CO, and H₂O. The rate coefficient is expressed by the following Arrhenius equation: for 2-hydroxy-2-methylbutyric acid, log k₁(s^?1 = (12.87 ± 0.19) ? (171.2 ± 2.1) kJ mol^?1 (2.303 RT)^?1; and for 2-ethyl 2-hydroxybutyric acid, log k₁s^?1) = (12.13 ± 0.34) ? (159.4 ± 3.7) kJ mol^?1 (2.303 RT)^?1. Augmentation of alkyl bulkiness at the 2-position of the 2-hydroxycarboxylic acids showed an increase in the rate of dehydration. The electron release of alkyl groups, rather than steric acceleration, appears to enhance the pyrolysis decomposition of these substrates. These reactions are believed to proceed through a semi-polar five-membered cyclic transition type of mechanism. © 1995 John Wiley & Sons, Inc.     

Non-isothermal kinetics of thermal decomposition of NH<Subscript>4</Subscript>ZrH(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>·H<Subscript>2</Subscript>O

Nanocrystalline NH₄ZrH(PO₄)₂·H₂O was synthesized by solid-state reaction at low heat using ZrOCl₂·8H₂O and (NH₄)₂HPO₄ as raw materials. X-ray powder diffraction analysis showed that NH₄ZrH(PO₄)₂·H₂O was a layered compound with an interlayer distance of 1.148 nm. The thermal decomposition of NH₄ZrH(PO₄)₂·H₂O experienced four steps, which involves the dehydration of the crystal water molecule, deamination, intramolecular dehydration of the protonated phosphate groups, and the formation of orthorhombic ZrP₂O₇. In the DTA curve, the three endothermic peaks and an exothermic peak, respectively, corresponding to the first three steps' mass losses of NH₄ZrH(PO₄)₂·H₂O and crystallization of ZrP₂O₇ were observed. Based on Flynn–Wall–Ozawa equation and Kissinger equation, the average values of the activation energies associated with the NH₄ZrH(PO₄)₂·H₂O thermal decomposition and crystallization of ZrP₂O₇ were determined to be 56.720 ± 13.1, 106.55 ± 6.28, 129.25 ± 4.32, and 521.90 kJ mol⁻¹, respectively. Dehydration of the crystal water of NH₄ZrH(PO₄)₂·H₂O could be due to multi-step reaction mechanisms: deamination of NH₄ZrH(PO₄)₂ and intramolecular dehydration of the protonated phosphate groups from Zr(HPO₄)₂ are simple reaction mechanisms.     

Thermal and structural behavior of Buriti oil/poly(methyl methacrylate) and Buriti oil/polystyrene materials

Melting processes and thermal decompositions of [Ca(H₂O)₄](ClO₄)₂ and [Ca(NH₃)₆](ClO₄)₂ were studied by thermogravimetry analysis (TG) and differential scanning calorimetry (DSC). The gaseous products of the decomposition were on-line identified by a quadruple mass spectrometry (QMS). In both compounds the processes of loss of the ligands start at ca. 340–350 K and continue up to ca. 600 K. Tetraaquacalcium perchlorate dissolves in own coordination water (melts) at T _m=350 K. The decomposition of the sample proceeds in three main stages. In stage I (351–602 K) dehydration of [Ca(H₂O)₄](ClO₄)₂ to anhydrous Ca(ClO₄)₂ undergoes in two steps, in which consecutively 2/4 and 2/4 of all H₂O molecules are liberated. In stage II (602–701 K) anhydrous Ca(ClO₄)₂ has one solid-solid phase transition at T _c=619 K and then melts at T _m=689 K. Stage III (above 700 K) is connected with decomposition of melted Ca(ClO₄)₂ to oxygen and solid CaCl₂. The decomposition of the [Ca(NH₃)₆](ClO₄)₂ proceeds also in three main stages. In stage I (341–601 K) deamination of [Ca(NH₃)₆](ClO₄)₂ to Ca(ClO₄)₂ undergoes in two steps, in which consecutively 3/6 and 3/6 of all NH₃ molecules are liberated. Stages II and III (601–868 K) are exactly the same as they were observed for [Ca(H₂O)₄](ClO₄)₂.