Effects of solvents on the reactions of coordination complexes: Part 20. Kinetics and mechanism of base hydrolysis of (αβS) (Salicylato) (Tetraethylenepentamine) Cobalt(III) in aquo-organic solvent media

The kinetics of base hydrolysis of (αβS) (salicylato) (tetraethylenepentamine) cobalt(III) have been investigated in aquo-organic solvent media at 15.0 < t, °C < 40.0, and I = 0.10 mol dm (ClO₄^?) using propane-2-ol (?70% v/v), t-butanol (?60% v/v), acetone (?70% v/v), acetonitrile (?50% v/v), and ethylene glycol (?70% v/v) as cosolvents. Both the spontaneous and base-catalyzed hydrolysis of the phenoxide species [(tetren)CoO₂CC₆H₄O]⁺ were appreciably accelerated by the cosolvents PrⁱOH, Bu^tOH, Me₂CO, and MeCN. On the contrary the base hydroylsis (k₂) was retarded while spontaneous aquation (k₁) was accelerated to a small extent with increased EG content. Variation of log k₁ and log k (k = k₂ at I = 0) with mole fraction (_X0.S) or reciprocal of the relative permitivity (D_s^?1) of the media were nonlinear. The transfer free energy of the transition state relative to that of the initial state of the substrate for transfer of species from water to mixed solvents also varied nonlinearly with _X0.S, or D_s^?1 indicating solvent specificity. The activation parameters, ΔH^≠ and ΔS^≠ varied nonlinearly with solvent composition exhibiting extrema. The preferential solvation and solvent structural effects mediated the kinetics and energetics of the reaction. © 1995 John Wiley & Sons, Inc.     

Exploring the conformational space of cobalt(III)–salen catalyst for CO2/epoxide copolymerization: Effect of quaternary ammonium salts on preference of alternative isomers

Model catalysts for CO₂/epoxide copolymerization based on Co(III) complexes were studied, with focus on the preference of their alternative isomers, cisβ vs. trans. The systems range from model structures without the co‐catalyst, as derived from crystallographic data, to complex models with two  (CH₂)₄N⁺R₃ co‐catalyst chains (R = Me, Bu) grafted onto a Co(III)–salcy core. To explore the conformational space of the latter complexes, a computational protocol was developed, combining a systematic model‐building approach with static and molecular dynamics calculations, and multilevel energy assessment (PM7 and DFT). Results demonstrate an influence of the co‐catalyst on the relative stability of the isomers. The cisβ isomer is preferred for complexes without N⁺‐chains and the cisβ ↔ trans isomerization is feasible. Five‐coordinate species and open‐shell electronic configurations are energetically disfavored. The cisβ preference decreases with the introduction and enlargement of  (CH₂)₄N⁺R₃: both isomers can be populated for R = Me, while the trans isomer is visibly preferred for R = Bu. © 2018 Wiley Periodicals, Inc.     

Solvent and chelation effects on the photoreduction of cobalt(III)–amine complexes in aqueous–organic solvent media

The photoreduction of trans-[Co(NH₃)₄Cl₂]⁺, trans-[Co(en)₂Cl₂]⁺, [Co(dien)Cl₃], [Co(trien)Cl₂]⁺, and [Co(tetren)Cl]²⁺, ions has been studied using a low pressure Hg vapour lamp as light source (254 nm) in aqueous–organic solvents [0–30% (v/v) MeOH or 1,4-dioxane]. Quantum yields for Co^II production by redox decomposition have been determined in all the cases, and increase considerably with the increase in concentration of MeOH or 1,4-dioxane in the binary solvent mixtures under investigation. A plot of log(quantum yield) versus the Grunwald–Winstein Parameter, Y, which is a measure of solvent ionizing power, shows that a different blend of general and specific solvent interacts with the solute. This kind of specific solvent interaction on the reactant/excited state has been analysed using multiple regression: viz. Krygowski–Fawcett and Kamlet–Taft equations. Reasons for the difference in reactivity with chelation are also discussed.     

Aluminum five‐ and six‐coordination in bis(acetylacetonato)aminoalkoxides

Reactions of bis(acetylacetonato)aluminum(III)‐di‐μ‐isopropoxo‐di‐isopropoxo aluminum(III), [(CH₃COCHCOCH₃)₂Al(μ‐OPrⁱ)₂Al(OPrⁱ)₂] with aminoalcohols, (HO R NR¹R²) in 1:1 and 1:2 molar ratios in refluxing anhydrous benzene yielded binuclear complexes of the types [(CH₃COCHCOCH₃)₂Al(μ‐OPrⁱ)₂Al(O R NR¹R²)(OPrⁱ)] and [(CH₃COCHCOCH₃)₂Al(μ‐OPrⁱ)₂Al(O R NR¹R²)₂] (R   (CH₂)₃ , R¹ = R² = H; R =  CH₂C(CH₃)₂ , R¹ = R² = H; R =  (CH₂)₂ , R¹ = H, R² =  CH₃; and R   (CH₂)₂ , R¹ = R² = CH₃), respectively. All these compounds are soluble in common organic solvents and exhibit sharp melting points. Molecular weight determinations reveal their binuclear nature in refluxing benzene. Plausible structures have been proposed on the basis of elemental analysis, molecular weight measurements, IR, NMR (¹H, ¹³C, and ²⁷Al), and FAB mass spectral studies. ²⁷Al NMR spectra show the presence of both five‐ and six‐coordinated aluminum sites. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:518–522, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10184     

Effect of solvent on the reactions of coordination complexes part VII: Kinetics of solvolysis of cis-(bromo) (imidazole) bis-(ethylenediamine)cobalt (III) and cis-(bromo) (N-methyl imidazole)bis-(ethylenediamine) cobalt(III) in methanol-water media

The kinetics of the solvolytic aquation of cis-(Bromo) (imidazole) bis(ethylenediamine) cobalt (III) and cis-(Bromo) (N-methylimidazole) bis(ethylenediamine) cobalt(III) have been investigated in aqueous methanol media with methanol content 0–80% by weight and at temperatures 40–55°C. The pseudo-first order rate constant decreases with increasing methanol content. Plots of log k vs. D (where D_s is the bulk-dielectric constant of the solvent mixture) and log k vs. the Grunwald-Winstein Y-solvent parameter are nonlinear, the curvature of the plots is relatively more significant for the imidazole complex. The plots of log k vs. molfraction of methanol (X_MeOH) for both the substrates also deviate from linearity, the deviation being less and less marked, particularly for the N-methyl imidazole complex, as the temperature is increased. Hence preferential solvation phenomenon appears to be less significant when the N-H proton of imidazole is replaced by -CH₃ group. The plots of calculated values of the transfer free energy of the dissociative transition state, cis-{[(en)₂Co(B)]³⁺}* (B = imidazole, N-methylimidazole), relative to that of the initial state, cis-[Co(en)₂(B)Br]²⁺, for the transfer of the ions from water to the mixed solvent, against X_MeOH exhibit maxima at X_MeOH = 0.06, 0.27, and 0.12, 0.36 and minima at X_MeOH = 0.12 and 0.19 for cis-[(en)₂Co(imH)Br]²⁺ and its N-methylimidazole analogue respectively which are in keeping with the solvent structural changes around the initial state and transition state of these substrates as the solvent composition is varied. Plots of activation enthalpy and entropy against molfraction of the solvent mixtures exhibit maxima and minima. This type of variations of the activation parameters, ΔH^≠ and ΔS^≠, with X_MeOH speaks of the enthalpy and entropy changes associated with the solvent-shell reorganization of the complex ions both in the initial and in the transition states which contribute appreciably to the overall activation enthalpy and entropy of the aquation reaction.     

Alkoxy-1,3,5-triazapentadien(e/ato) copper(II) complexes: template formation and applications for the preparation of pyrimidines and as catalysts for oxidation of alcohols to carbonyl products

Template combination of copper acetate (Cu(AcO)₂?H₂O) with sodium dicyanamide (NaN(C≡N)₂, 2 equiv) or cyanoguanidine (N≡CNHC(=NH)NH₂, 2 equiv) and an alcohol ROH (used also as solvent) leads to the neutral copper(II)–(2,4‐alkoxy‐1,3,5‐triazapentadienato) complexes [Cu{NH?C(OR)NC(OR)?NH}₂] (R=Me ( 1 ), Et ( 2 ), nPr ( 3 ), iPr ( 4 ), CH₂CH₂OCH₃ ( 5 )) or cationic copper(II)–(2‐alkoxy‐4‐amino‐1,3,5‐triazapentadiene) complexes [Cu{NH?C(OR)NHC(NH₂)?NH}₂](AcO)₂ (R=Me ( 6 ), Et ( 7 ), nPr ( 8 ), nBu ( 9 ), CH₂CH₂OCH₃ ( 10 )), respectively. Several intermediates of this reaction were isolated and a pathway was proposed. The deprotonation of 6 – 10 with NaOH allows their transformation to the corresponding neutral triazapentadienates [Cu{NH?C(OR)NC(NH₂)?NH}₂] 11 – 15 . Reaction of 11 , 12 or 15 with acetyl acetone (MeC(?O)CH₂C(?O)Me) leads to liberation of the corresponding pyrimidines NC(Me)CHC(Me)NC NHC(?NH)OR, whereas the same treatment of the cationic complexes 6 , 7 or 10 allows the corresponding metal‐free triazapentadiene salts {NH₂C(OR)?NC(NH₂)?NH₂}(OAc) to be isolated. The alkoxy‐1,3,5‐triazapentadiene/ato copper(II) complexes have been applied as efficient catalysts for the TEMPO radical‐mediated mild aerobic oxidation of alcohols to the corresponding aldehydes (molar yields of aldehydes of up to 100 % with >99 % selectivity) and for the solvent‐free microwave‐assisted synthesis of ketones from secondary alcohols with tert‐butylhydroperoxide as oxidant (yields of up to 97 %, turnover numbers of up to 485 and turnover frequencies of up to 1170 h^?1).     

Kinetic study of the reaction of OH with a series of acetals at 298 ± 4 K

Rate coefficients have been measured at 298 ± 4 K and 1000 mbar total pressure for the reactions of OH with a series of symmetrical acetals (R O CH₂ O R, R = C₁ to C₄) using a relative kinetic technique. The investigations have been performed in a laboratory photoreactor and also in the large outdoor EUPHORE simulation chamber facility in Valencia, Spain. The following rate coefficients (in units of 10⁻¹¹ cm³ molecule⁻¹ s⁻¹) have been obtained: dimethoxy methane (R = CH₃), 0.49 ± 0.02; diethoxy methane (R = CH₃CH₂), 1.84 ± 0.18; di‐n‐propoxy methane (R = CH₃CH₂CH₂), 2.63 ± 0.49; di‐iso‐propoxy methane (R = (CH₃)₂CH), 3.93 ± 0.48; di‐n‐butoxy methane (R = CH₃CH₂CH₂CH₂), 3.47 ± 0.42; di‐iso‐butoxy methane (R = (CH₃)₂CHCH₂), 3.68 ± 0.57; di‐sec‐butoxy methane (R = CH₃CH₂C(CH₃)H), 4.68 ± 0.05. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 797–803, 1999     

Synthesis and characterizations of bis(phenoxy)‐amine tin(II) complexes for ring‐opening polymerization of lactide

A series of tin(II) complexes supported by N₂O₂ bis(phenol)‐amine ligands were prepared from the reactions of the corresponding ligands with Sn[N(SiMe₃)₂]₂ in benzene at room temperature. The ligands were designed to have different substituted group at the ortho‐position on the aryl rings (R = ^tBu, CH₃) and N‐containing side arm (E = ? CH₂NEt₂ and pyridine) giving a variation of tin(II) complexes (R = ^tBu, E = CH₂NEt₂, 2a ; R = ^tBu, E = py, 2b ; R = CH₃, E = CH₂NEt₂, 2c ; R = CH₃, E = py, 2d ). All complexes were characterized by NMR spectroscopy and single‐crystal X‐ray analysis. The single‐crystal X‐ray crystallography revealed that all complexes have a monomeric four‐coordinate tin center with a distorted seesaw structure. All complexes are active for solvent‐free polymerization of l ‐lactide at 120 °C giving poly(l ‐lactide) with narrow to moderate dispersity (Ð = 1.12–1.56). In the presence of benzyl alcohol during the polymerization, the resulting polymer was found to be linear having benzyl alcohol as the end group while, in the absence of benzyl alcohol, the polymer was cyclic. The large ^tBu group at the ortho‐position was found to decrease polymerization activity while the more basic ? CH₂NEt₂ group was found to increase the polymerization activity. The polymerization of rac‐lactide under a similar condition gave PLA having a slight heterotactic bias for all catalysts. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2104–2112     

Effect of solvent on the reactions of coordination complexes. Part 10. kinetics of solvolysis of cis(chloro)(1-amino-propan-2-ol)bis-(ethylenediamine)cobalt(III) in methanol + water,propan-2-ol + water,and t-butanol + water media

The solvolysis of cis(chloro)(1-amino-propan-2-ol)bis(ethylenediamine)cobalt(III) in aqueous alcoholic media using methanol, propan-2-ol, t-butanol as cosolvents, resulted in the formation of the (N,O) chelated productcis[Co(en)₂(NH₂CH₂CHOHCH₃)]³⁺. The pseudo first order rate constant decreased with increasing molfraction (X_org) of alcohols, the decrease being less marked as the bulkiness of hydrophobic moiety of alcohol increased. The plots of log ??_obs vs. reciprocal of the bulk dielectric constant of the solvents, log ??_obs vs. Grunwald-Winstein solvent parameter and log ??_obs, vs. X_obs under isodielectric condition (D_s = 50, at 50°C) for CH₃OH/H₂O, C₂H₅OH/H₂O, (CH₃)₂CHOH/H₂O, (CH₃)₃C? OH/H₂O, (CH₂)₂(OH)₂/H₂O, and (CH₃)₂ C ? O/H₂O in water rich media indicated that both solvent structural effects and presumably the hydrophobic interaction appreciably mediate the reaction. The calculated values of the relative transfer free energy at 25°C[ΔG_t(C^3?)-ΔG_t(i.s)_(s←w)] where C³⁺ and i.s. denote the dissociative transition state {cis[Co(en)₂(NH₂CH₂CHOHCH₃)]³⁺}* and the initial state, respectively, indicated that the tripositive transition state is more effectively solvated by the mixed solvent media, than the dipositive initial state, the effect appeared to be more significant with increasing X_org. The plots of activation enthalpy and entropy against X_org exhibited maxima and minima indicating that enthalpy and entropy changes associated with the solvent shell reorganization of the reactant contribute to the overall activation parameters.     

Effects of solvent on the reactions of coordination complexes: Part 17. Kinetics and mechanism of base hydrolysis of (αβS) (salicylato) (tetraethylenepentamine)cobalt (III) in methanol + water and dimethylsulphoxide + water media

The base hydrolysis of (αβS) (salicylato) (tetraethylenepentamine)cobalt(III) has been investigated in MeOH + water and DMSO + water media (0–70% (v/v) cosolvents) at 20.0 ? t°C ? 35.0 and I = 0.10 mol dm^?3 (ClO₄^?). The phenoxide species [(tetren)CoO₂CC₆H₄O]⁺ undergoes both OH^?-independent and OH^?-catalyzed hydrolysis via SN₁ICB and SN₁CB mechanism, respectively. The OH^?-independent hydrolysis of the phenoxide species is catalyzed by both DMSO + water and MeOH + water media, the former exerting a much stronger rate accelerating effect than the latter. The OH^?-catalyzed reaction is strongly accelerated by DMSO + water medium but insensitive to the composition of MeOH + water medium up to 40% (v/v) MeOH beyond which it was not detectable under the experimental conditions. Data analysis has been attempted on the basis of the solvent stabilizing and destabilizing effects on the initial state and transition state of the concerned reactions. The nonlinear variation of the activation parameters, ΔH^≠ and ΔS^≠, with solvent compositions presumably indicates that the solvent structural effects mediate the energetics of solvation of the initial state and transition state of the concerned reactions. The linearity in ΔH^≠ vs. ΔS^≠ plot accomodating all data for k₁ and k₂ paths in DMSO + water and MeOH + water further suggests that the solvent effects on these parameters are mutually compensatory.     

Kinetic and thermodynamic study of thiolato and sulfenato Co(III) complexes in water–acetonitrile mixtures

Rate constants are reported for peroxodisulfate as well as periodate oxidation of[Co(en)₂{SCH₂CH(COO)NH₂}]⁺, [Co(en)₂(SCH₂CH₂NH₂)]²⁺, and [Co(en)₂(SOCH₂CH₂NH₂)]²⁺ in water–acetonitrile mixtures. The dependence of rate constants on the acetonitrile concentration is established and discussed. Ancillary information relevant to solvation of reactants has been obtained from solvatochromism and from Gibbs transfer functions. The solvent effect is discussed from the viewpoint of change in solvation of initial and transition state on going from water to water–acetonitrile mixtures. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 34–40, 2004     

Square‐Planar Ruthenium(II) Complexes: Control of Spin State by Pincer Ligand Functionalization

Functionalization of the PNP pincer ligand backbone allows for a comparison of the dialkyl amido, vinyl alkyl amido, and divinyl amido ruthenium(II) pincer complex series [RuCl{N(CH₂CH₂PtBu₂)₂}], [RuCl{N(CHCHPtBu₂)(CH₂CH₂PtBu₂)}], and [RuCl{N(CHCHPtBu₂)₂}], in which the ruthenium(II) ions are in the extremely rare square‐planar coordination geometry. Whereas the dialkylamido complex adopts an electronic singlet (S=0) ground state and energetically low‐lying triplet (S=1) state, the vinyl alkyl amido and the divinyl amido complexes exhibit unusual triplet (S=1) ground states as confirmed by experimental and computational examination. However, essentially non‐magnetic ground states arise for the two intermediate‐spin complexes owing to unusually large zero‐field splitting (D>+200 cm^?1). The change in ground state electronic configuration is attributed to tailored pincer ligand‐to‐metal π‐donation within the PNP ligand series.     

Living cationic polymerization route to poly(oligooxyethylene carbonate) vinyl ethers

The addition of dialkyl (R = Me or Et) carbonates to poly(oxyethylene)-based solid polymeric electrolytes resulted in enhanced ionic conductivities. Relatively high conductivities in lithium batteries with solutions of lithium salts in di(oligooxyethylene) carbonates such as R( OCH₂ CH₂ )_nOC(O) O ( CH₂CH₂O )_mR (R = Et, n = 1, 2, or 3, m = 0, 1, 2, or 3) and related carbonates were obtained. In this respect, related comb-shaped poly(oligooxyethylene carbonate) vinyl ethers of the type  CH₂CH(OR) were prepared [R = ( OCH₂ CH₂ )_nOC(O) O ( CH₂CH₂O )_mR′; (1) n = 2 or 3, m = 0, R′ = Et; (2) n = 2 or 3; m = 3, R′ = Me]. The direct preparation of derived target polymers of this class by polymerization of the corresponding vinyl ether-type monomers could not be achieved because of a rapid in situ decarboxylative decomposition of these monomers (as formed) during the final step of their synthesis. Instead, a prepolymer was prepared by a living cationic polymerization of CH₂CH (OCH₂CH₂ )_n O C(O) CH₃ (n = 2 or 3). The hydrolysis of its pendant ester groups, followed by the reaction of the hydrolyzed prepolymer with each of several alkyl chloroformates of the type Cl C(O) O( CH₂CH₂O )_mR′ (m = 0, 2, or 3, R′ = Me or Et) resulted in the corresponding target polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2171–2183, 2002     

Solvent and substituent effects on the photoreduction of cobalt(III)-aryl amine complexes in an aquo-organic solvent medium

The photoreduction of a series of Co^III complex ions, [Coen₂Cl(RC₆H₄NH₂)]²⁺ where R = p-OMe, p-OEt, p-Me, m-Me, H, and p-F, has been studied using a low pressure Hg vapour lamp as the light source (254 nm) in an aquo-organic solvent [15–40% (v/v) 2-methylpropan-2-ol] medium. Quantum yields for Co^II production by redox decomposition have been determined in all cases. The quantum yield increases considerably with the increase in concentration of the organic co-solvent in the binary solvent mixture under investigation. The Hammett correlation is linear, affording negative reaction constants, which indicate that the excited state is electron deficient. Correlation of the experimental results with Kamlet–Taft's solvatochromic parameters indicates that the solvent hydrogen bond donor acidity plays a dominant role in governing the reactivity.     

Preparation of poly(alkylenebenzimidazole) by ruthenium complex catalyzed polycondensation of 3,3′‐diaminobenzidine with α,ω‐diols

The reactions of 3,3′‐diaminobenzidine with 1,12‐dodecanediol in 1 : 1–1:3 molar ratios in the presence of RuCl₂(PPh₃)₃ catalyst give poly(alkylenebenzimidazole), [ (CH₂)₁₁ O (CH₂)₁₁ Im / (CH₂)₁₀ Im ]_n (Im: 5,5′‐dibenzimidazole‐2,2′‐diyl) (I_a‐I_d) in 71–92% yields. The relative ratio between the [(CH₂)₁₁ O (CH₂)₁₁ Im ] unit (A) and the [‐ (CH₂)₁₀ Im ] unit (B) in the polymer chain varies depending on the ratio of the substrates used. The polymer I_a obtained from the 1 : 3 reaction contains these structural units in a 98 : 2 ratio. The polymers are soluble in polar solvents such as DMF (N,N‐dimethylformamide), DMSO (dimethyl sulfoxide), and NMP (N‐methyl‐2‐pyrrolidone) and have molecular weights M_n (M_w) of 4,200–4,800 (4,800–6,500) by GPC (polystyrene standard). The polymerization of the diol and 3,3′‐diaminobenzidine in higher molar ratios leads to partial cross‐linking of the resulting polymers I_e and I_f via condensation of imidazole NH group with CH₂OH group. Similar reactions of 3,3′‐diaminobenzidine with α,ω‐diols, HO(CH₂)_mOH (m = 4–10), in a 1 : 3 molar ratio give the polymers containing [ (CH₂)_m−1 O (CH₂) _m−1 Im ] and [ (CH₂) _m−2 Im ] units with partial cross‐linked structures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1383–1392, 1999     

[{LiCH(CH2CH2OMen)SO2Ph}4] (OMen = Menthyl): Synthesis and First Structure of a Chiral Solvent Free Lithiated Sulfone with a Direct Li–C Bond

R*OCH₂CH₂CH₂SO₂Ph (R*OH = MenOH, (–)‐menthol, ( 3a ); BorOH, (1S)‐(–)‐borneol, ( 3b )) were found to react with n‐BuLi in n‐pentane/n‐hexane and toluene/n‐hexane under deprotonation yielding LiCH(CH₂CH₂OR*)SO₂Ph (R* = Men, ( 4a ); Bor, ( 4b )) which reacted with n‐Bu₃SnCl forming the requisite tri(n‐butyl)tin compounds n‐Bu₃SnCH(CH₂CH₂OR*)SO₂Ph (R* = Men, ( 5a ); Bor, ( 5b )) as diastereomeric mixtures. The identities of 5a and 5b were unambiguously proved by ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopic measurements. Solutions of 4a afforded crystals of [{LiCH(CH₂CH₂OMen)SO₂Ph}₄] ( 4a′ ) for which the structure was determined by single‐crystal X‐ray crystallography. Complex 4a′ crystallized in a tetrameric structure without any additional solvent molecules. There were found direct Li–C bonds (Li1–C1/Li2–C20 2.231(9)/2.236(9) Å). The tetrahedral donor set of Li is completed by three oxygen atoms. One oxygen atom comes from the OMen substituent via intramolecular coordination and two oxygen atoms come from SO₂ groups of neighboured LiCH(CH₂CH₂OMen)SO₂Ph moieties. Thus, a heterocubane structure with a Li₄S₄ core is built up.     

Yttrium bis(alkyl) and bis(amido) complexes bearing N,O multidentate ligands. Synthesis and catalytic activity towards ring‐opening polymerization of L‐lactide

Methoxy‐modified β‐diimines HL ¹ and HL ² reacted with Y(CH₂SiMe₃)₃(THF)₂ to afford the corresponding bis(alkyl)s [L¹Y(CH₂SiMe₃)₂] ( 1 ) and [L²Y(CH₂SiMe₃)₂] ( 2 ), respectively. Amination of 1 with 2,6‐diisopropyl aniline gave the bis(amido) counterpart [L¹Y{N(H)(2,6‐iPr₂? C₆H₃)}₂] ( 3 ), selectively. Treatment of Y(CH₂SiMe₃)₃(THF)₂ with methoxy‐modified anilido imine HL ³ yielded bis(alkyl) complex [L³Y(CH₂SiMe₃)₂(THF)] ( 4 ) that sequentially reacted with 2,6‐diisopropyl aniline to give the bis(amido) analogue [L³Y{N(H)(2,6‐iPr₂? C₆H₃)}₂] ( 5 ). Complex 2 was “base‐free” monomer, in which the tetradentate β‐diiminato ligand was meridional with the two alkyl species locating above and below it, generating tetragonal bipyramidal core about the metal center. Complex 3 was asymmetric monomer containing trigonal bipyramidal core with trans‐arrangement of the amido ligands. In contrast, the two cis‐located alkyl species in complex 4 were endo and exo towards the O,N,N tridentate anilido‐imido moiety. The bis(amido) complex 5 was confirmed to be structural analogue to 4 albeit without THF coordination. All these yttrium complexes are highly active initiators for the ring‐opening polymerization of L ‐LA at room temperature. The catalytic activity of the complexes and their “single‐site” or “double‐site” behavior depend on the ligand framework and the geometry of the alkyl (amido) species in the corresponding complexes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5662–5672, 2007     

Organoselenium compounds containing pyrazole or phenylthiazole groups: Synthesis,structure, tin(IV) complexes and antiproliferative activity

The diorganodiselenides (pzCH₂CH₂)₂Se₂ ( 1 ) and (PhtzCH₂)₂Se₂ ( 2 ) were prepared by reacting Na₂Se₂ with 1‐(2‐bromoethyl)‐1H‐pyrazole and 4‐(chloromethyl)‐2‐phenylthiazole, respectively, while the reactions between 1‐(2‐bromoethyl)‐1H‐pyrazole or 4‐(chloromethyl)‐2‐phenylthiazole and the lithium organoselenolates [2‐(Et₂NCH₂)C₆H₄]SeLi and [2‐{O(CH₂CH₂)₂NCH₂}C₆H₄]SeLi in a 1:1 molar ratio resulted in the heteroleptic diorganoselenium(II) compounds [2‐(Et₂NCH₂)C₆H₄](R)Se (R = pzCH₂CH₂ ( 3 ) or PhtzCH₂ ( 5 )) and [2‐{O(CH₂CH₂)₂NCH₂}C₆H₄](R)Se (R = pzCH₂CH₂ ( 4 ) or PhtzCH₂ ( 6 )). The diorganotin(IV) bis(organoselenolato) derivatives of type R₂Sn(SeCH₂CH₂pz)₂ (R = 2‐(Me₂NCH₂)C₆H₄ ( 7 ) or Me ( 8 )) were obtained by reacting (pzCH₂CH₂)SeNa with the appropriate diorganotin(IV)dichloride in a 2:1 molar ratio. All compounds were investigated using NMR spectroscopy (¹H, ¹³C, ⁷⁷Se, ¹¹⁹Sn as appropriate) and ESI+ mass spectrometry. The molecular structures of 2 and 6 were determined using single‐crystal X‐ray diffraction. The formation of a 10–Se–3 hypercoordinated species was evidenced for 6 in the solid state, as a consequence of the C,N coordination behaviour of the 2‐{O(CH₂CH₂)₂NCH₂}C₆H₄ group. Compounds 1 , 7 and 8 were investigated for their antiproliferative activity towards the mouse colon carcinoma C26 cell line with the preliminary results showing a better activity than 5‐fluorouracil.     

Crystal Structure and EPR Spectra of cis—Dioxo—molybdenum（V） Complex with o—Aminophenol

ＩｎｔｒｏｄｕｃｔｉｏｎＭｏｌｙｂｄｅｎｕｍｉｓｗｉｄｅｌｙｕｓｅｄｉｎｂｉｏｌｏｇｉｃａｌｓｙｓｔｅｍｓｄｕｅｔｏｔｈｅｔｗｏｂａｓｉｃｆｏｒｍｓ :ｎｉｔｒｏｇｅｎａｓｅｓａｎｄｏｘｏｔｒａｎｓｆｅｒａｓｅｓｏｒｏｘｏｍｏｌｙｂｄｏｅｎｚｙｍｅｓ .Ｔｈｅｌａｔｔｅｒａｓｔｈｅｍｏｎｏｎｕｃｌｅａｒａｃｔｉｖｅｓｉｔｅｓｏｆａｍｕｃｈｍｏｒｅｄｉｖｅｒｓｅｇｒｏｕｐｏｆｅｎｚｙｍｅｓｉｎｇｅｎｅｒａｌｆｕｎｃｔｉｏｎｃａｔａｌｙｔｉｃａｌｌｙｔｒａｎｓｆｅｒａｎｏｘｙｇｅｎａｔｏｍｅｉｔｈｅｒｔ…     

Homoleptic Octahedral Methylamine Complexes of Manganese(II): Solvothermal Syntheses and Crystal Structures of [Mn(NH2CH3)6]Cl2 and the Pentaselenide [Mn(NH2CH3)6]Se5

[Mn(NH₂CH₃)₆]Cl₂ ( 1 ) and [Mn(NH₂CH₃)₆]Se₅ ( 2 ) were prepared by solvothermal reactions in liquid methylamine from MnCl₂ at 150 °C for 1 and from a mixture of MnCl₂, Rb₂Se and selenium at 120 °C for 2 . Both 1 and 2 were obtained in high yields as colorless and dark‐red crystals and represent the first homoleptic methylamine complexes with coordination number six. Compound 1 crystallizes rhombohedral (R$\bar{3}$ , Z = 3) and is built of only slightly distorted octahedral [Mn(NH₂CH₃)₆]²⁺ cations and Cl^– anions. Compound 2 crystallizes orthorhombic (Pnna, Z = 4) and is built of octahedral [Mn(NH₂CH₃)₆]²⁺ cations showing a strong angular distortion and of Se₅^2– anions in the form of chains in transoid conformation. DFT calculations reveal an almost undistorted ground state structure for [Mn(NH₂CH₃)₆]²⁺ with N–Mn–N angular distortions of 1° from orthogonality, close to the structure found for the complex in 1 . The calculated energy necessary for a distortion as found in the structure of 2 is rather low and amounts to 26 kJmol^–1 which is in the range typical for hydrogen bonds. The N–Mn–N angular distortions of the complex cation in 2 , observed in the range of 10°, is caused by cation‐anion interactions in the crystal structure by N–H ···· Se hydrogen bonds.