水系混合离子全电池LiMn2O4//NaTi2(PO4)3

分别以LiMn_2O_4,NaTi_2(PO_4)_3为正负极,1 mol·L~(-1) Li_2SO_4和0.5 mol·L~(-1) Na_2SO_4的混合水溶液为电解液组装成一种水系混合离子全电池。分别将正负极材料在3种不同水相电解液(1 mol·L~(-1) Li_2SO_4、0.5 mol·L~(-1)Na_2SO_4以及1 mol·L~(-1) Li_2SO_4+0.5 mol·L~(-1)Na_2SO_4混合电解液)中进行循环伏安和恒流充放电测试,结果发现,LiMn_2O_4在上述电解液中仅有Li~+的脱出/嵌入而Na~+由于半径较大而不参与该过程,NaTi_2(PO_4)_3在3种电解液中Li+、Na+均参与嵌入/脱嵌过程,且Li~+和Na~+的嵌入/脱出峰电位相差不大,分别为-0.82和-0.64 V,-0.95和-0.75 V;全电池在265 mA·g~(-1)电流密度下平均放电电压为1.55 V,充放电比容量分别为100.1和74.9 m Ah·g~(-1)。     

Cr2(WO4)3和Cr2(MoO4)3的负热膨胀特性研究

用液相反应-前驱物烧结法制备了Cr₂(WO₄)₃和Cr₂(MoO₄)₃粉体。298～1 073 K的原位粉末X射线衍射数据表明Cr₂(WO₄)₃和Cr₂(MoO₄)₃的晶胞体积随温度的升高而增大, 本征线热膨胀系数分别为(1.274±0.003)×10^-6 K^-1和(1.612±0.003)×10^-6 K^-1。用热膨胀仪研究了Cr₂(WO₄)₃和Cr₂(MoO₄)₃在静态空气中298～1 073 K范围内热膨胀行为，即开始表现为正热膨胀，随后在相转变点达到最大值，最后表现为负热膨胀，其负热膨胀系数分别为(-7.033±0.014)×10^-6 K^-1和(-9.282±0.019)×10^-6 K^-1。     

超分子化合物[M(4，4′-bipy)2(H2O)4·(4，4′-bipy)2·(3，5-diaba)2·8H2O](M=Co，Ni，Cd)的合成及晶体结构

合成了3个超分子化合物[M(4，4′-bipy)₂(H₂O)₄]·(4，4′-bipy)₂·(3，5-diaba)₂·8H₂O(M=Co (1)，Ni (2)，Cd (3)；4，4′-bipy=4，4′-联吡啶；3，5-diaba=3，5-二氨基苯甲酸阴离子)，用红外光谱、元素分析及X-射线单晶衍射进行了表征。3个化合物的晶体都属于单斜晶系，空间群为P2/c。晶体学参数：化合物1：a=0.938 9(2) nm，b=0.775 1(1) nm，c=3.928 4(6) nm，β=90.14(2)°，V= 2.858 80(69) nm³，Z=4，D_c=1.397 g·cm^-3，F(000)=1 266，μ=0.380 mm^-1，R₁=0.034 9,wR₂=0.082 9;化合物2:a=0.938 3(2) nm,b=0.775 3(1) nm，c= 3.921 8(6) nm，β=90.09(1)°，V=2.852 80(68) nm³，Z=2，D_c=1.399 g·cm^-3，F(000)=1 268，μ=0.420 mm^-1，R₁=0.036 6，wR₂=0.080 5；化合物3：a=0.940 91(13) nm，b=0.778 85(11) nm，c=3.971 2(5) nm，β=90.10°，V=2.910 2(7) nm³，Z=2，D_c=1.433 g·cm^-3，F(000)=1 308，μ=0.454 mm^-1，R₁=0.046 8，wR₂=0.096 4。3，5-diaba未参与配位，在配位阳离子[M(4，4′-bipy)₂(H₂O)₄]²⁺中，金属离子M(II)与来自2个4，4′-bipy的2个氮原子和4个水分子的氧原子配位，呈八面体的几何构型。分子中还存在未配位的4，4′-bipy。通过配位阳离子、游离4，4′-bipy及未配位的3，5-diaba间的丰富氢键，构建成具有三维结构的超分子化合物。     

Fe2O3与TiF3添加剂对LiBH4-MgH2复合氢化物体系的协同催化作用

通过球磨方法制备出2LiBH4-MgH2,2LiBH4-MgH2-10%Fe2O3,2LiBH4-MgH2-10%TiF3,2LiBH4-MgH2-5%Fe2O3-5%TiF3和2LiBH4-MgH2-10%Fe2O3-10%TiF35个复合氢化物体系,用热重(TG)、差示扫描量热(DSC)、X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)和压力-组成-温度仪(PCT)等对所制备体系进行表征.结果表明,Fe2O3和TiF3的掺杂均能够有效地改善2LiBH4-MgH2复合体系的放氢性能,尤其是两者共掺杂的2LiBH4-MgH2-10%Fe2O3-10%TiF3体系,初始放氢温度为110℃,总放氢量达到约9.6%.对2LiBH4-MgH2-5%Fe2O3-5%TiF3体系的PCT表征结果表明,在400℃时,10 min内放氢量达到了8.6%,放氢热力学和放氢动力学均优于单一相的掺杂,体现了两相掺杂的协同催化作用.     

配位聚合物[Co2(C13H10NO2)4(4，4′-bipy)2]n的合成、晶体结构、热稳定性及荧光性质

以N-苯基邻氨基苯甲酸(NPA)、CoSO₄和4,4′-联吡啶为原料,溶液法合成了一个新的配位聚合物[Co₂(C₁₃H₁₀NO₂)₄(4,4′-bipy)₂]_n,并对其进行了红外、元素分析、热重、荧光及X射线衍射等表征与研究。测定结果表明,该配合物晶体属三斜晶系,空间群P1,晶胞参数：a=1.086 99(13) nm,b=1.136 23(13) nm,c=1.414 72(16) nm,α=71.886 0(10)°,β=76.374(2)°,γ=66.177 0(10)°,V=1.507 0(3) nm³,D_c=1.409 g·cm^-3,Z=2,F(000)=662。最终GOF=1.028,最终偏离因子R₁=0.043 7,wR₂=0.079 4。中心Co(Ⅱ)离子分别与2个联吡啶N原子,4个羧基氧原子配位形成六配位的变形八面体结构。其中1个NPA分子的羧基以螯合方式与Co(Ⅱ)金属原子配位,另2个NPA分子的羧基以桥联的方式与相邻的2个Co(Ⅱ)离子配位,形成一个双核Co簇的二级构筑单元。此双核Co簇通过4,4′-联吡啶分子连接起来,最终形成形成一维双链梯状结构。     

双链镍配位聚合物{[Ni(4，4′-bipy)(3，5-DMBA)2(CH3OH)2]·[Ni(4，4′-bipy)(3，5-DMBA)2(H2O)2]}n的水热合成、晶体结构及其热稳定性

配位聚合物由于其在分子识别、催化、光电性质和磁性等方面表现出的独特性能,近年来已引起人们的极大关注[1-3].     

三维穴状化合物[Zn3（pda）2（SO4）（H2O）4·4H2O]的合成与表征

利用H2pda与Zn(II)离子反应得到化合物([Zn3(pda)2(SO4)(H2O)4.4H2O])(pda2-=(4-carboxym-ethyl-piperazin-1-yl)-acetic anion)。通过元素分析、FT-IR和X-ray单晶衍射对化合物进行了结构表征。结果表明:标题化合物内含有一个由配体pda2-阴离子和金属Zn(II)离子形成的三维孔洞结构,孔洞空位填充了一个SO42-阴离子。     

配合物Fe(pda)2(H2O)4和[FeCo(pda)4(H2O)4]n的合成与晶体结构

采用水热法合成了2个3-(3-吡啶基)丙烯酸的配合物:Fe(pda)2(H2O)4(1)和[FeCo(pda)4(H2O)4]n(2)(pda=3-(3-吡啶基)丙烯酸),用红外光谱、元素分析、热重-差热以及X-射线衍射单晶结构分析进行了表征.2个配合物都属于单斜晶系,配合物1的空间群为P21/n,配合物2的为P21/c.配合物1是一个pda配体中仅吡啶基氮原子参与配位、而羧基上的氧原子未参与配位的单核结构,通过大量的氢键作用形成三维超分子体系.2是pda配体桥联Fe和Co的异核二维层状配位聚合物;配体吡啶基上的氮原子和羧基上的氧原子都参与了配位,其中羧基采用单齿配位模式.     

WS2/CuGa2O4复合材料的制备及其气敏性

采用共沉淀法制备了CuGa₂O₄纳米材料,并利用水热法制备了一系列WS₂/CuGa₂O₄复合材料。结合X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)等对制备的材料进行了物相组成、表面形貌以及元素价态的分析。研究了WS₂的复合量对 CuGa₂O₄材料检测乙醇气体敏感性能的影响。实验结果表明,当 WS₂与 CuGa₂O₄质量比为 1%时,该复合材料制备的传感器在室温下对 100 μL·L^-1乙醇气体表现出 345.3 的灵敏度,响应时间和恢复时间分别为 184 和 69 s,且最低检测限为 0.1μL·L^-1。     

ZnFe2O4/Ag/TiO2复合材料的制备及其光催化性能

以硝酸银、钛酸四丁酯、无水氯化锌、六水氯化铁为原料,采用溶胶-凝胶法与溶剂热相结合的方法制备了ZnFe₂O₄/Ag/TiO₂复合材料,通过扫描电子显微镜、能谱分析仪、X射线粉末衍射仪、X射线光电子能谱仪、振动样品磁强计、紫外可见分光光度计对样品进行表征及测试。结果表明： ZnFe₂O₄/Ag/TiO₂-10具有最佳的光催化效果,在紫外和可见光下对染料的降解率都能达到90%以上,具有优异的紫外可见光光催化活性。ZnFe₂O₄/Ag/TiO₂具有独特的磁性,能在外部磁场作用下进行回收利用,这使其在实际应用中成为可能。通过磁分离技术重复回收利用5次后仍然保持优良的光催化性能,说明ZnFe₂O₄/Ag/TiO₂-10具有优异的磁性及较高的光催化循环稳定性。     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Formal [(2+2)+2] and [(2+2)+(2+2)] nonconjugated dienediyne cascade cycloadditions

[reaction: see text] Fluoranthene 2 and heptacycle 3 are easily accessible from the reaction of diyne 1 and norbornadiene (NBD) in the presence of the rhodium catalyst. The unusual [(2+2)+(2+2)] adduct 3 was confirmed by the X-ray crystal structure analysis.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Die Photoionenspektren von SCl2, S2Cl2 und S2Br2

Photoionization Mass Spectra of SCl₂, S₂Cl₂, and S₂Br₂ Photoionization mass spectra of SCl₂, S₂Cl₂, and S₂Br₂ have been measured. Heats of formation, bond energies, and ionization potentials of fragments have been calculated from appearance potentials.