X-ray scintillation in lead-free double perovskite crystals

Metal halide perovskites have shown great performance for various applications,including solar cells,light emitting diodes,and radiation detectors,but they still suffer from the toxicity of lead and instability.Here we report the use of lanthanide series as trivalent metals to obtain low toxicity and highly stable double perovskites(Cs_2NaLnCl_6,Ln=Tb or Eu)with high scintillation light yield.The crystals exhibit typical f-f transitions of lanthanide cations,while Cs_2NaTbCl_6exhibits strong green photoluminescence,and Cs_2NaEuCl_6exhibits red photoluminescence.Under X-ray radiations,the light yield of Cs_2NaTbCl_6reaches46600 photons MeV~(-1),much higher than that of the commercially used(Lu,Y)_2SiO_5:Ce~(3+)crystals(LYSO,28500 photons MeV~(-1)),and previously reported lead-based perovskites(14000 photons MeV~(-1)).As a new member of lead-free perovskites,lanthanide-based double perovskites open up a new route toward radiation detections and potential medical imaging.     

Lead‐Free Sodium–Indium Double Perovskite Nanocrystals through Doping Silver Cations for Bright Yellow Emission

Lead‐free halide perovskite nanocrystals (NCs) have drawn wide attention for solving the problem of lead perovskites toxicity and instability. Herein, we synthesize the direct band gap double perovskites undoped and Ag‐doped Cs₂NaInCl₆ NCs by variable temperature hot injection. The Cs₂NaInCl₆ NCs have little photoluminescence because of dark self‐trapped excitons (STEs). The dark STEs can be converted into bright STEs by doping with Ag⁺ to produce a bright yellow emission, with the highest photoluminescence quantum efficiency of 31.1 %. The dark STEs has been directly detected experimentally by ultrafast transient absorption (TA) techniques. The dynamics mechanism is further studied. In addition, the Ag‐doped NCs show better stability than the undoped ones. This result provides a new way to enhance the optical properties of lead‐free perovskites NCs for high‐performance light emitters.     

Lead‐Free Halide Double Perovskite Cs2AgBiBr6 with Decreased Band Gap

Environmentally friendly halide double perovskites with improved stability are regarded as a promising alternative to lead halide perovskites. The benchmark double perovskite, Cs₂AgBiBr₆, shows attractive optical and electronic features, making it promising for high‐efficiency optoelectronic devices. However, the large band gap limits its further applications, especially for photovoltaics. Herein, we develop a novel crystal‐engineering strategy to significantly decrease the band gap by approximately 0.26 eV, reaching the smallest reported band gap of 1.72 eV for Cs₂AgBiBr₆ under ambient conditions. The band‐gap narrowing is confirmed by both absorption and photoluminescence measurements. Our first‐principles calculations indicate that enhanced Ag–Bi disorder has a large impact on the band structure and decreases the band gap, providing a possible explanation of the observed band‐gap narrowing effect. This work provides new insights for achieving lead‐free double perovskites with suitable band gaps for optoelectronic applications.     

Lead-Free Halide Double Perovskite Cs2AgBiBr6 with Decreased Band Gap

Environmentally friendly halide double perovskites with improved stability are regarded as a promising alternative to lead halide perovskites. The benchmark double perovskite, Cs₂AgBiBr₆, shows attractive optical and electronic features, making it promising for high-efficiency optoelectronic devices. However, the large band gap limits its further applications, especially for photovoltaics. Herein, we develop a novel crystal-engineering strategy to significantly decrease the band gap by approximately 0.26 eV, reaching the smallest reported band gap of 1.72 eV for Cs₂AgBiBr₆ under ambient conditions. The band-gap narrowing is confirmed by both absorption and photoluminescence measurements. Our first-principles calculations indicate that enhanced Ag–Bi disorder has a large impact on the band structure and decreases the band gap, providing a possible explanation of the observed band-gap narrowing effect. This work provides new insights for achieving lead-free double perovskites with suitable band gaps for optoelectronic applications.     

In Situ Ellipsometry Measurements on the Halide Phase Segregation of Mixed Halide Lead Perovskites**

Methylammonium lead iodide bromides MAPb(Br_xI_1-x)₃ are a class of mixed halide lead perovskites, materials that offer high-power conversion efficiencies and bandgap tunability. For these reasons, they are a promising absorber material for future solar cells, although their use is still limited due to several factors. The reversible phase segregation under even low light intensities is one of them, lowering the effective bandgap due to local segregation into iodide-rich and bromide-rich phases. While several studies have been done to illuminate the mechanism and suppression of phase segregation, challenges remain to understand its kinetics. We obtained dynamic ellipsometric measurements from x=0.5 mixed halide lead perovskite thin films protected by a polystyrene layer under green laser light with a power density of ∼11 W/cm². Time constants between 1.7(±0.7)×10⁻³ s⁻¹ for the segregation and 1.5(±0.6)×10⁻⁴ s⁻¹ for recovery were calculated. The phase segregation rate constants are surprisingly two orders of magnitude slower than and the recovery rate is consistent with those measured using photoluminescence methods under similar conditions. These results confirm a concern in the literature about the complexity in the phase separation kinetics measured from photoluminescence. We expect ellipsometry to serve as a complementary technique to other spectroscopies in studying mixed-halide lead perovskites phase segregation in the future.     

Intrinsic Broadband White‐Light Emission from Ultrastable,Cationic Lead Halide Layered Materials

We report a family of cationic lead halide layered materials, formulated as [Pb₂X₂]²⁺[⁻O₂C(CH)₂CO₂⁻] (X=F, Cl, Br), exhibiting pronounced broadband white‐light emission in bulk form. These well‐defined PbX‐based structures achieve an external quantum efficiency as high as 11.8 %, which is comparable to the highest reported value (ca.9 %) for broadband phosphors based on layered organolead halide perovskites. More importantly, our cationic materials are ultrastable lead halide materials, which overcome the air/moisture‐sensitivity problems of lead perovskites. In contrast to the perovskites and other bulk emitters, the white‐light emission intensity of our materials remains undiminished after continuous UV irradiation for 30 days under atmospheric conditions (ca.60 % relative humidity). Our mechanistic studies confirm that the broadband emission is ascribed to short‐range electron‐phonon coupling in the strongly deformable lattice and generated self‐trapped carriers.     

Intrinsic Broadband White‐Light Emission from Ultrastable,Cationic Lead Halide Layered Materials

We report a family of cationic lead halide layered materials, formulated as [Pb₂X₂]²⁺[⁻O₂C(CH)₂CO₂⁻] (X=F, Cl, Br), exhibiting pronounced broadband white‐light emission in bulk form. These well‐defined PbX‐based structures achieve an external quantum efficiency as high as 11.8 %, which is comparable to the highest reported value (ca.9 %) for broadband phosphors based on layered organolead halide perovskites. More importantly, our cationic materials are ultrastable lead halide materials, which overcome the air/moisture‐sensitivity problems of lead perovskites. In contrast to the perovskites and other bulk emitters, the white‐light emission intensity of our materials remains undiminished after continuous UV irradiation for 30 days under atmospheric conditions (ca.60 % relative humidity). Our mechanistic studies confirm that the broadband emission is ascribed to short‐range electron‐phonon coupling in the strongly deformable lattice and generated self‐trapped carriers.     

Hydrophobic Metal Halide Perovskites for Visible‐Light Photoredox C−C Bond Cleavage and Dehydrogenation Catalysis

Two‐dimensional lead and tin halide perovskites were prepared by intercalating the long alkyl group 1‐hexadecylammonium (HDA) between the inorganic layers. We observed visible‐light absorption, narrow‐band photoluminescence, and nanosecond photoexcited lifetimes in these perovskites. Owing to their hydrophobicity and stability even in humid air, we applied these perovskites in the decarboxylation and dehydrogenation of indoline‐2‐carboxylic acids. (HDA)₂PbI₄ or (HDA)₂SnI₄ were investigated as photoredox catalysts for these reactions, and quantitative conversion and high yields were observed with the former.     

Chemical Origin of the Stability Difference between Copper(I)‐ and Silver(I)‐Based Halide Double Perovskites

Recently, Cu^I‐ and Ag^I‐based halide double perovskites have been proposed as promising candidates for overcoming the toxicity and instability issues inherent within the emerging Pb‐based halide perovskite absorbers. However, up to date, only Ag^I‐based halide double perovskites have been experimentally synthesized; there are no reports on successful synthesis of Cu^I‐based analogues. Here we show that, owing to the much higher energy level for the Cu 3d¹⁰ orbitals than for the Ag 4d¹⁰ orbitals, Cu^I atoms energetically favor 4‐fold coordination, forming [CuX₄] tetrahedra (X=halogen), but not 6‐fold coordination as required for [CuX₆] octahedra. In contrast, Ag^I atoms can have both 6‐ and 4‐fold coordinations. Our density functional theory calculations reveal that the synthesis of Cu^I halide double perovskites may instead lead to non‐perovskites containing [CuX₄] tetrahedra, as confirmed by our material synthesis efforts.     

Improving Broadband White-Light Emission Performances of 2D Perovskites by Subtly Regulating Organic Cations

Recently, 2D organic–inorganic hybrid lead halide perovskites have attracted intensive attention in solid-state luminescence fields such as single-component white-light emitters, and rational optimization of the photoluminescence (PL) performance through accurate structural-design strategies is still significant. Herein, by carefully choosing homologous aliphatic amines as templates, isotypical perovskites [DMEDA]PbCl₄ ( 1 , DMEDA=N,N-dimethylethylenediamine) and [DMPDA]PbCl₄ ( 2 , DMPDA=N,N-dimethyl-1,3-diaminopropane) having tunable and stable broadband bluish white emission properties were rationally designed. The subtle regulation of organic cations leads to a higher degree of distortion of the 2D [PbCl₄]²⁻ layers and enhanced photoluminescence quantum efficiencies (<1 % for 1 and 4.9 % for 2 ). The broadband light emissions could be ascribed to self-trapped excitons on the basis of structural characterization, time-resolved PL, temperature-dependent PL emission, and theoretical calculations. This work gives a new guidance to rationally optimize the PL properties of low-dimensional halide perovskites and affords a platform to probe the structure–property relationship.     

Room-Temperature Ferroelectric Material Composed of a Two-Dimensional Metal Halide Double Perovskite for X-ray Detection

Although two-dimensional (2D) metal–halide double perovskites display versatile physical properties due to their huge structural compatibility, room-temperature ferroelectric behavior has not yet been reported for this fascinating family. Here, we designed a room-temperature ferroelectric material composed of 2D halide double perovskites, (chloropropylammonium)₄AgBiBr₈, using an organic asymmetric dipolar ligand. It exhibits concrete ferroelectricity, including a Curie temperature of 305 K and a notable spontaneous polarization of ≈3.2 μC cm⁻², triggered by dynamic ordering of the organic cation and the tilting motion of heterometallic AgBr₆/BiBr₆ octahedra. Besides, the alternating array of inorganic perovskite sheets and organic cations endows large mobility-lifetime product (μτ=1.0×10⁻³ cm² V⁻¹) for detecting X-ray photons, which is almost tenfold higher than that of CH₃NH₃PbI₃ wafers. As far as we know, this is the first study on an X-ray-sensitive ferroelectric material composed of 2D halide double perovskites. Our findings afford a promising platform for exploring new ferroelectric materials toward further device applications.     

Bulk Mn2+ Doped 1D Hybrid Lead Halide Perovskite with Highly Efficient,Tunable and Stable Broadband Light Emissions

Mn²⁺ doped colloidal three-dimensional (3D) lead halide perovskite nanocrystal (PNC) has attracted intensive research attention; however, the low exciton binding energy and fatal optical instability of 3D PNC seriously hinder the optoelectronic application. Therefore, it remains significant to explore new stable host perovskite with strongly bound exciton to realize more desirable luminescent property. In this work, we utilized bulk one-dimensional (1D) hybrid perovskite of [AEP]PbBr₅ ⋅ H₂O (AEP=N-aminoethylpiperazine) as structural platform to rationally optimize the luminescent property by a controllable Mn²⁺ doping strategy. Significantly, the series of Mn²⁺-doped 1D [AEP]PbBr₅ ⋅ H₂O show enhanced energy transfer efficiency from the strongly bound excitons of host material to 3d electrons of Mn²⁺ ions, resulting in tunable broadband light emissions from weak yellow to strong red spectral range with highest photoluminescence quantum yield up to 28.41 %. More importantly, these Mn²⁺-doped 1D perovskites display ultrahigh structural and optical stabilities in humid atmosphere, water and high temperature exceeding the conventional 3D PNC. Combined highly efficient, tunable and stable broadband light emissions enable Mn²⁺-doped 1D perovskite as excellent down-converting phosphor showcasing the potential application in white light emitting diode. This work not only provides a profound understanding of low-dimensional perovskites but also opens a new way to rationally design high-performance broadband light emitting perovskites for solid-state lighting and displaying devices.     

Temperature-Dependent Photoluminescence of Hexafluorobenzene-Intercalated Phenethylammonium Tin Iodide 2D Perovskite

Tin halide perovskites are potential alternatives of lead halide perovskites. However, the easy oxidation of Sn²⁺ to Sn⁴⁺ brings in a challenge. Recently, layered two-dimensional hybrid tin halide perovskites have been shown to partially resist the oxidation process because of the presence of hydrophobic organic molecules. Consequently, such layered hybrid perovskites are being explored for optoelectronic applications. The optical properties of layered tin halide perovskites depend on the interlayer separation and the dielectric mismatch between the organic and inorganic layers. Intercalation (insertion) of a molecular species between the layers modifies the interlayer interactions affecting the optical properties of layered hybrid perovskites. We investigated the effect of hexafluorobenzene (HFB) intercalation in phenethylammonium tin iodide [(PEA)₂SnI₄] using temperature-dependent (6 K to 300 K) photoluminescence (PL). HFB intercalation increases the bandgap. A strong PL quenching is observed in pristine (PEA)₂SnI₄ below 150 K, probably because of the presence of non-emissive states. HFB intercalation suppresses the influence of such non-emissive states resulting in an increase in PL intensity at the cryogenic temperatures. Our results highlight that a simple molecular intercalation (non-covalent interaction) into layered hybrid perovskites can significantly tailor the electronic and optical properties.     

High‐Pressure Band‐Gap Engineering in Lead‐Free Cs2AgBiBr6 Double Perovskite

Novel inorganic lead‐free double perovskites with improved stability are regarded as alternatives to state‐of‐art hybrid lead halide perovskites in photovoltaic devices. The recently discovered Cs₂AgBiBr₆ double perovskite exhibits attractive optical and electronic features, making it promising for various optoelectronic applications. However, its practical performance is hampered by the large band gap. In this work, remarkable band gap narrowing of Cs₂AgBiBr₆ is, for the first time, achieved on inorganic photovoltaic double perovskites through high pressure treatments. Moreover, the narrowed band gap is partially retainable after releasing pressure, promoting its optoelectronic applications. This work not only provides novel insights into the structure–property relationship in lead‐free double perovskites, but also offers new strategies for further development of advanced perovskite devices.     

Room‐Temperature Ferroelectric Material Composed of a Two‐Dimensional Metal Halide Double Perovskite for X‐ray Detection

Although two‐dimensional (2D) metal–halide double perovskites display versatile physical properties due to their huge structural compatibility, room‐temperature ferroelectric behavior has not yet been reported for this fascinating family. Here, we designed a room‐temperature ferroelectric material composed of 2D halide double perovskites, (chloropropylammonium)₄AgBiBr₈, using an organic asymmetric dipolar ligand. It exhibits concrete ferroelectricity, including a Curie temperature of 305 K and a notable spontaneous polarization of ≈3.2 μC cm^?2, triggered by dynamic ordering of the organic cation and the tilting motion of heterometallic AgBr₆/BiBr₆ octahedra. Besides, the alternating array of inorganic perovskite sheets and organic cations endows large mobility‐lifetime product (μτ=1.0×10^?3 cm² V^?1) for detecting X‐ray photons, which is almost tenfold higher than that of CH₃NH₃PbI₃ wafers. As far as we know, this is the first study on an X‐ray‐sensitive ferroelectric material composed of 2D halide double perovskites. Our findings afford a promising platform for exploring new ferroelectric materials toward further device applications.     

Halide Double Perovskite Ferroelectrics

Halide double perovskites have recently emerged as a promising environmentally friendly optoelectronic and photovoltaic material for their inherent thermodynamic stability, high defect tolerance, and appropriate band gaps. However, to date, no ferroelectric material based on halide double perovskites has been discovered. Herein, by hetero‐substitution of lead and cation intercalation of n‐propylamine, the first halide double perovskite ferroelectric, (n‐propylammonium)₂CsAgBiBr₇ ( 1 ), is reported and it exhibits distinct ferroelectricity with a notable saturation polarization of about 1.5 μC cm^?2. More importantly, single‐crystal photodetectors of 1 exhibit extraordinary performance with containing high on/off ratios of about 10⁴, fast response rates of 141 μs, and detectivity as high as 5.3×10¹¹ Jones. This finding opens a new way to design high‐performance perovskite ferroelectrics, and provides a viable approach in the search for stable and lead‐free optoelectronic materials as an alternative to the lead‐containing system.     

Small‐Band‐Gap Halide Double Perovskites

Despite their compositional versatility, most halide double perovskites feature large band gaps. Herein, we describe a strategy for achieving small band gaps in this family of materials. The new double perovskites Cs₂AgTlX₆ (X=Cl ( 1 ) and Br ( 2 )) have direct band gaps of 2.0 and 0.95 eV, respectively, which are approximately 1 eV lower than those of analogous perovskites. To our knowledge, compound 2 displays the lowest band gap for any known halide perovskite. Unlike in A^IB^IIX₃ perovskites, the band‐gap transition in A^I₂BB′X₆ double perovskites can show substantial metal‐to‐metal charge‐transfer character. This band‐edge orbital composition is used to achieve small band gaps through the selection of energetically aligned B‐ and B′‐site metal frontier orbitals. Calculations reveal a shallow, symmetry‐forbidden region at the band edges for 1 , which results in long (μs) microwave conductivity lifetimes. We further describe a facile self‐doping reaction in 2 through Br₂ loss at ambient conditions.     

反溶剂法快速合成高效发光二维锡卤钙钛矿材料

铅卤钙钛矿材料由于其优异的光电性质而受到了广泛关注. 但是, 材料中铅的毒性问题极大地阻碍了其大规模应用. 因此, 寻找与铅卤钙钛矿具有相似光电性质的非铅卤化物钙钛矿材料十分重要. 其中, 锡基卤化物钙钛矿被认为是铅基钙钛矿材料最佳的替代材料之一. 本文通过简便的反溶剂方法, 合成了一系列新型二维(RNH₃)₂SnX₄(R为烷基链, X=Br^-, I^-)钙钛矿材料. 研究结果表明, 所合成的材料具有优异的荧光发射性质, 发光量子效率高达98.5%, 比三维ASnX₃[A=Cs⁺, 甲胺(MA⁺), 甲脒(FA⁺)等]型钙钛矿表现出更好的稳定性. 本文所采用的合成方法简单易行, 有利于实现金属卤化物钙钛矿材料的大规模合成及在固态照明器件和显示器件领域的工业应用.     

Halogen Vacancies Enable Ligand‐Assisted Self‐Assembly of Perovskite Quantum Dots into Nanowires

Interest has been growing in defects of halide perovskites in view of their intimate connection with key material optoelectronic properties. In perovskite quantum dots (PQDs), the influence of defects is even more apparent than in their bulk counterparts. By combining experiment and theory, we report herein a halide‐vacancy‐driven, ligand‐directed self‐assembly process of CsPbBr₃ PQDs. With the assistance of oleic acid and didodecyldimethylammonium sulfide, surface‐Br‐vacancy‐rich CsPbBr₃ PQDs self‐assemble into nanowires (NWs) that are 20–60 nm in width and several millimeters in length. The NWs exhibit a sharp photoluminescence profile (≈18 nm full‐width at‐half‐maximum) that peaks at 525 nm. Our findings provide insight into the defect‐correlated dynamics of PQDs and defect‐assisted fabrication of perovskite materials and devices.     

Three-Dimensional Cuprous Lead Bromide Framework with Highly Efficient and Stable Blue Photoluminescence Emission

Considering the instability and low photoluminescence quantum yield (PLQY) of blue-emitting perovskites, it is still challenging and attractive to construct single crystalline hybrid lead halides with highly stable and efficient blue light emission. Herein, by rationally introducing d¹⁰ transition metal into single lead halide as new structural building unit and optical emitting center, we prepared a bimetallic halide of [(NH₄)₂]CuPbBr₅ with new type of three-dimensional (3D) anionic framework. [(NH₄)₂]CuPbBr₅ exhibits strong band-edge blue emission (441 nm) with a high PLQY of 32 % upon excitation with UV light. Detailed photophysical studies indicate [(NH₄)₂]CuPbBr₅ also displays broadband red light emissions derived from self-trapped states. Furthermore, the 3D framework features high structural and optical stabilities at extreme environments during at least three years. To our best knowledge, this work represents the first 3D non-perovskite bimetallic halide with highly efficient and stable blue light emission.