离子液体微乳液体系的应用研究

室温离子液体具有诸多优异的物理化学性质及功能,是一类备受关注的新型介质和材料,应用于诸多领域。特别是近年来,由离子液体参与形成的微乳液因其在生物、医药、催化以及材料制备等领域具有潜在的应用前景而备受关注。本文综述了近年来咪唑类离子液体作为极性、非极性和表面活性剂组分,分别取代微乳液体系中的水相、油相和表面活性剂相,形成的一系列新型的微乳液体系的研究进展,归纳了水、有机溶剂、高聚物、助表面活性剂、温度等因素对离子液体微乳液性质的影响。重点介绍了离子液体微乳液的热点应用,包括以离子液体微乳液液滴为模板合成纳米材料,离子液体微乳液作为酶反应的介质及其在有机反应等方面的研究进展。     

离子液体微乳液研究进展

离子液体参与构筑的微乳液体系兼顾了离子液体和微乳液的优点,如热稳定范围宽、增溶能力强、结构/性质可调控等.根据离子液体的结构特点,它可以替代经典微乳液中的任意一个组分形成离子液体微乳液,并在材料制备、酶活性和生物催化、药物增溶与传输等领域展示了良好的应用前景.本文系统地总结了离子液体替代经典微乳液中的一个组分、两个组分和三个组分所形成的离子液体微乳液,综述了这类体系的结构、性质、应用等方面的研究进展,并对其未来发展趋势和需要解决的主要问题进行了分析讨论.     

假二元微乳液体系标度律

微乳液是在表面活性物质存在下形成的油 -水混合热力学稳定体系 ,在一定条件下 ,表面活性剂双 -2 -乙基己基硫代琥珀酸钠 (AOT) -水 -正构烷烃可形成油包水型微乳液体系 ,其中分散颗粒的大小仅由水与 AOT的物质的量比 x确定[1] .这类微乳液体系有一个低临界温度 Tc,当温度高于 Tc时体系分成两相 ,两相中分散颗粒的大小相同 ,但颗粒浓度不同 ,因此 ,可看成一个假二元体系 .近年来 ,有关这类微乳液体系在临界区域与温度相关的标度律是否符合 3 D-Ising模型方面存在争论 [2～ 4 ] .本文通过精确测量 AOT-水 -正构烷烃假二元微乳液体系在…     

水/[NH_2 ebim][PF_6]/Triton X-100/正丁醇/环己烷微乳液体系的制备

采用自制的功能离子液体1-(胺乙基)-3-丁基咪唑六氟磷酸盐([NH_2ebim][PF6]),制备了水/[NH_2ebim][PF_6]/Triton X-100/正丁醇/环己烷微乳液体系,通过动态光散射技术测定微乳液的粒径分布和分散相浓度,通过电导率仪测定体系电导率的变化,由这两种分析方法确定微乳液类型,微乳液类型被分为表面活性剂与水的互溶相包油型(O/S+W)和水包油型(O/W),并绘制出拟三元相图;通过耗散动力学(DPD)模拟不同水含量时微乳液体系中的聚集行为,模拟结果呈现出的微乳液类型与实验测定分析结果一致,证明了相图绘制的正确性;文中还考察了Triton X-100与正丁醇的比例对微乳液区域的影响,实验结果表明,随着Triton X-100与正丁醇的比例增加微乳液区域增大。     

阴离子型微乳液的电导行为及其溶液结构

根据电导测量,研究了属于W/O→双连续→O/W一类微乳液的十二烷基硫酸钠(SDS)/正丁醇/辛烷/水体系的溶液结构.并探讨了表面活性剂离子对微乳液导电行为的贡献,以及表面活性剂与助表面活性剂含量、油含量对微乳液溶液结构的影响.微乳液的导电行为在W/O子区域中主要是由于SDS阴离子和在O/W子区域中是由于Na离子的影响.在双连续区(IZ)中SDS阴离子和Na阳离子都能影响导电行为增加表面活性剂含量有助于形成O/W微乳液,而助表面活性剂和油含量都增加有助于于形成W/O微乳液.     

离子液体参与构筑的微乳液:离子液微乳液

微乳液一般是指两种互不相溶的液体(极性相:一般为水;非极性相:一般为有机溶剂),在表面活性剂作用下形成的均一透明的热力学稳定体系,已广泛应用于材料制备、化学合成等领域.离子液体是熔点低于100℃,完全由离子组成的一类物质,作为一种"绿色溶剂",具有诸多优异的物理化学性质,又被称为"可设计型溶剂".本文综述了离子液体作为极性相、非极性相,甚至表面活性剂,构筑的一类微乳液――离子液微乳液,重点介绍了其物理化学性质的研究进展,并展望了发展趋势.     

离子液体掺杂聚苯胺固相微萃取涂层的电沉积制备及其在芳香胺检测中的应用

新型萃取材料及相关涂层制备技术是固相微萃取技术发展的重点.本研究在1-羟丙基-3-甲基咪唑-四氟硼酸盐([C3(OH)mim][BF4])和HNO3混合溶液中,通过电化学方法在铂(Pt)丝表面固定新型聚苯胺-离子液体(PANI-IL)涂层.电镜分析表明,离子液体存在时,PANI膜孔结构变均匀、比表面积增大.以芳香胺为模...     

聚苯胺的合成及其摩擦学行为的研究

选择合适的ＳＤＢＳ／ 苯胺／ 水三组分Ｏ／Ｗ 微乳液与苯胺单体共存的两相体系,以单体相为单体源,在Ｏ／Ｗ 三组分微乳液中进行了苯胺聚合,成功地制备出了能够稳定分散于石腊油的聚苯胺微粒。并在四球试验机上研究合成条件、负荷、浓度对其摩擦学行为的影响。结果表明：聚苯胺有一定的减摩抗磨效果     

Tween80/BmimPF6/醇/甲苯体系的相行为

以环境友好型的Tween80为表面活性剂, 以醇(乙醇、正丁醇、正己醇、正辛醇、正癸醇和异戊醇)为助表面活性剂, 对离子液体1-丁基-3-甲基咪唑六氟磷酸盐(bmimPF6)和甲苯进行了微乳化实验, 绘制了不同条件下Tween80离子液体的微乳体系的拟三元相图, 考察了醇的种类、含量对单相微乳区的影响, 并用电导法研究了在乙醇为助表面活性剂情况下, 单相微乳区的结构转变. 结果表明, 当醇(异戊醇)固定时, 随着表面活性剂/醇的质量比增加, 单相微乳区的面积逐渐增大; 不同链长的直链醇对单相微乳区的面积影响与该醇在离子液体中的溶解情况有关, 单相微乳区的面积随着直链醇链长的增加而越小; 当乙醇作助表面活性剂时, 所得到的单相微乳区的面积最大, 且单相微乳区存在着O/IL(oil-in-ionic liquid)、双连续相和IL/O(ionic liquid-in-oil)三种微结构. 尤其对离子液体微乳体系的电导随油的含量的增加而最初增大的现象进行了解释, 这一现象是由于油主要起到减少离子液体中离子对或离子的积聚, 提高带电离子淌度的作用.     

Tween80/BmimPF6/醇/甲苯体系的相行为

以环境友好型的Tween80为表而活性剂,以醇(乙醇、正丁醇、正己醇、正辛醇、正癸醇和异戊醇)为助表面活性剂,对离子液体1-丁基-3-甲基咪唑六氟磷酸盐(bmimPF6)和甲苯进行了微乳化实验,绘制了不同条件下Tween80离子液体的微乳体系的拟二元相图,考察了醇的种类、含量对单相微乳区的影响,并用电导法研究了在乙醇为助表面活性剂情况下,单相微乳区的结构转变.结果表明,当醇(异戊醇)固定时,随着表面活性剂/醇的质量比增加,单相微乳区的面积逐渐增大:不同链长的直链醇对单相微乳区的而积影响与该醇在离子液体中的溶解情况有关,单相微乳区的面积随着直链醇链长的增加而越小;当乙醇作助表面活性剂时,所得到的单相微乳区的而积最大,且单相微乳区存在着O/IL(oil-in-ionic liquid)、双连续相和IL/O(ionic liquid-in-oil)三种微结构.尤其对离子液体微乳体系的电导随油的含量的增加而最初增大的现象进行了解释,这一现象是由于油主要起到减少离子液体中离子对或离子的积聚,提高带电离子淌度的作用.     

Electrochemical property of graphene oxide/polyaniline composite prepared by in situ interfacial polymerization

Graphene oxide–polyaniline composites were synthesized by an interfacial method using two green solvents, water and an ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate), as the two phases. The interfacial polymerization of aniline was carried out at room temperature in the presence of graphene oxide dispersed in the aqueous phase. The analysis revealed the surface of the graphene sheets to be coated with a smooth thin layer of polyaniline. The thermal stability of the composites was much better than that of bare graphene oxide. The composites were used to modify the glass carbon electrodes for the chemical detection of hydrogen peroxide in aqueous media. This method is a facile, efficient, and green route for the development of doped polyaniline materials suitable for chemical sensors.     

PI/PANI复合材料的制备与表征

以纳米聚苯胺为电磁波的吸收剂,高强度、耐高温的聚酰亚胺为基体设计与制备了高强度、耐热、质轻、薄和吸收宽的新型纳米复合吸波材料.利用微乳液法,以十二烷基苯磺酸(DBSA)为乳化剂和掺杂剂,以过硫酸铵(APS)为氧化剂合成了纳米级聚苯胺(PANI).在此基础上,以PANI的NMP溶液为均苯四甲酸二酐(PMDA)与4,4′-二氨基二苯醚(ODA)的聚合场所,室温下,原位聚合出PANI/聚酰胺酸(PAA)复合材料,再经过亚胺化制备出了PANI/PI复合材料.利用XRD表征了聚合物的结晶形态.红外光谱表征了中间体和聚合物.利用场发射扫描电镜发现PANI/PI复合材料呈现海岛结构,PANI像岛屿一样分散在PI的连续相中,两种材料复合并没有破坏各自的结晶形态.利用数字电桥和自制电极表征了不同含量复合材料的损耗性能,当聚苯胺加到3.4%以上时,复合材料的损耗因数提高了,并且随着频率的增大损耗因数直线增大.     

Synthesis and electronic properties of poly(aniline-co-2-amino-4-hydroxybenzenesulfonic acid)

Poly(aniline- co-2-amino-4-hydroxybenzenesulfonic acid) (PAAHB) was first synthesized via the electrochemical copolymerization of aniline and 2-amino-4-hydroxybenzenesulfonic acid (AHB) in the presence of an ionic liquid. The conductivity of PAAHB in the oxidized state is 0.45 S cm(-1). The conductivity and ESR spectra of PAAHB are slightly affected by water. The cyclic voltammograms of PAAHB reveal excellent redox activity from pH<1 to pH 11.0. This is attributed to the synergistic effect of the -SO3- and -OH functional groups in the copolymer chain and the ionic liquid incorporated into the PAAHB film. It is evident that the pH dependence of the redox activity and conductivity of PAAHB is much better than that of polyaniline. The proton NMR spectra of PAAHB and AHB demonstrate that the -SO3- group exists in the copolymer chain instead of the -SO3H group. Therefore, PAAHB can be used for the determination of dopamine in the presence of ascorbic acid as a result of the -SO3- group, which plays an important role in the selectivity.     

Highly porous silica-polyaniline nanocomposite as a novel solid-phase microextraction fiber coating

A highly porous fiber-coated SBA-15/polyaniline material was prepared for solid-phase microextraction (SPME). The SBA-15/polyaniline nanocomposite was synthesized via chemical polymerization. The prepared SBA-15/polyaniline particles were analyzed by scanning electron microscopy analysis. The prepared nanomaterial was immobilized onto a stainless steel wire for fabrication of the SPME fiber. The fiber was evaluated for the extraction of some polycyclic aromatic hydrocarbons (PAHs) from aqueous sample solutions in combination with gas chromatography-mass spectrometry (GC-MS). In optimum conditions (extraction temperature 60°C, extraction time 40 min, ionic strength 20%, stirring rate: 500 rpm, desorption temperature 260°C, desorption time 2 min), the repeatability for one fiber (n=3), expressed as relative standard deviation (RSD%), was between 5.3 and 8.6% for the test compounds. For deionized water, spiked with selected PAHs, the detection limits for the studied compounds were between 2 and 20 pg/mL.     

Nonenzymatic hydrogen peroxide sensor based on a polyaniline-single walled carbon nanotubes composite in a room temperature ionic liquid

A film consisting of polyaniline and single-walled carbon nanotubes was electro-polymerized on a platinum electrode in a room temperature ionic liquid. This resulted in a selective and non-enzymatic electrode for sensing hydrogen peroxide (HP). The morphology of the sensor film was characterized by scanning electron microscopy, cyclic voltammetry, and chronoamperometry. The composite film synthesized in an ionic liquid provided an electrode with enhanced selectivity and excellent stability. The electrode exhibited good electrocatalytic properties in terms of detection of HP, with a linear range from 5 µM to 1 mM, a detection limit of 1.2 µM, and a response time of around 4 s.     

丙酮/水混合体系合成聚苯胺的聚合过程研究

对丙酮/水体系中合成聚苯胺(PAn)的反应进行跟踪,通过聚合过程的开路电压、聚合温度、特性粘度和中间体的分子结构对聚合过程进行研究。结果表明,丙酮/水体系对控制产物的粒度和分子量都有利;当丙酮/水的体积比为0.2左右时,所得产物的各项性能较好。与水体系相比,在丙酮/水混合体系中聚合过程维持高电位的时间延长,聚合链增长时间和自加速反应时间也有延长。苯胺聚合是以头-尾连接形式进行,且中间产物由高氧化态逐渐转变成中间氧化态。     

First principles molecular dynamics simulation of a task-specific ionic liquid based on silver-olefin complex: atomistic insights into a separation process

First principles molecular dynamics based on density functional theory is applied to a hypothetical ionic liquid whose cations and anions are silver-ethylene complex [Ag(C2H4)2+] and tetrafluoroborate [BF4-], respectively. This ionic liquid represents a group of task-specific silver complex-based ionic liquids synthesized recently. Molecular dynamics simulations at two temperatures are performed for five picoseconds. Events of association, dissociation, exchange, and recombination of ethylene with silver cation are found. A mechanism of ethylene transfer similar to the Grotthus type of proton transfer in water is identified, where a silver cation accepts one ethylene molecule and donates another to a neighboring silver cation. This mechanism may contribute to fast transport of olefins through ionic liquid membranes based on silver complexes for olefin/paraffin separation.     

纳米TiO_2的制备及其改性和应用研究进展

简要介绍了TiO2纳米材料的制备、改性方法及其应用;其制备方法包括气相法和液相法,液相法又包括溶胶-凝胶法、水热/溶剂热法、液相沉积法和微乳液法;其改性主要包括贵金属沉积、离子掺杂、染料敏化和半导体复合;其应用领域则主要包括光催化、光伏电池和光解水.     

Polyaniline precipitation in aqueous medium: from bulk aggregates to nanoparticles

A postsynthetic self-assembly system was designed to investigate a construction process from suspended polyaniline (PANI) molecules to condensed aggregates. The conventionally synthesized PANI was dissolved in polar solvent and introduced into acidic medium with electrolytes similar to the aniline chemical oxidative polymerization (COP) medium. In this way, reaction interference that is usually encountered in the COP process could be avoided, and influences of medium conditions including organic electrolytes on the self-assembly behaviors of PANI were studied. It was discovered that, in a static aqueous medium with moderate pH and rich electrolytes, PANI molecules composed of bulk aggregates could self-assemble into well-dispersed nanoparticles with few structural changes. Electrostatic force is considered to dominate the self-assembly of PANI molecules as compared with other noncovalent interaction or the effect of soft templates such as ionic liquid and surfactant. The results are supposed to provide better understanding on the formation mechanism of micro/nanostructured PANI.