Macroscopic alignment of graphene stacks by Langmuir-Blodgett deposition of amphiphilic hexabenzocoronenes

We present structural studies of Langmuir (L) and Langmuir-Blodgett (LB) films of new amphiphilic hexa-peri-hexabenzocoronene (HBC) discotics, carrying five branched alkyl side chains and one polar group. The polar group is either a carboxylic acid moiety or an electron acceptor moiety (anthraquinone). Grazing-incidence X-ray diffraction (GIXD) and X-ray reflectivity, both utilizing synchrotron radiation, show that these amphiphilic HBCs form well-defined Langmuir monolayers at the air-water interface, with a pi-stacked columnar structure where the HBC cores are rotated around the surface normal and tilted relative to the water surface. The intercolumnar distance is 20 A. The HBCs are confined to a layer lying on top of the layer of polar groups that are in contact with the water subphase. Efficient transfer of the monolayer of the anthraquinone-substituted HBC derivative to hydrophobic quartz substrates by vertical dipping gave well-defined multilayer Y-type LB films. Polarized optical spectroscopy, GIXD, and X-ray reflectivity measurements show that the LB films consist of at least two phases. Heating the films results in an irreversible rearrangement to a single macroscopically aligned phase of hexagonally packed columns oriented along the dipping direction with disk planes perpendicular to the columnar axes and stacked in a cofacial manner. This phase transition is analogous to the reversible transition observed in the bulk material.     

Crystal structure of friction-transferred poly(2,5-dioctyloxy-1,4-phenylenevinylene)

Poly(2,5-dioctyloxy-1,4-phenylenevinylene) (DOPPV) was found to form a highly oriented film by a friction-transfer technique. Structural investigation of friction-transferred DOPPV was studied by means of polarized ultraviolet-visible (UV-vis) absorption spectroscopy, polarized photoluminescence (PL) spectroscopy, and synchrotron-sourced grazing incident X-ray diffraction (GIXD) analysis. The polarized UV-vis absorption and PL spectra indicate clear axial alignment. DOPPV backbones in friction-transferred film are highly aligned along the drawing direction of the friction-transfer. Further information of the molecular arrangement in friction-transferred DOPPV film was investigated by both the out-of-plane and the in-plane GIXD analyses with synchrotron source. The DOPPV molecules in friction-transferred films were perfectly arranged three-dimensionally: the backbones aligned along the drawing direction of friction-transfer, the alkyl side chains lay in the film plane, and the planar backbones were arranged parallel to the film surface. Additionally, two neighboring DOPPV molecules along the direction of inter-backbones separation by alkyl side chains were found to be shifted with respect to one another by the mean distance of half of a monomeric repeat.     

Oriented growth of crystalline pentacene films with preferred a-b in-plane alignment on a rubbed crystalline polymethylene surface

We have achieved a growth of highly oriented crystalline pentacene thin films, with preferred a-b in-plane orientation with respect to the rubbing direction of a rubbed polymethylene surface. The polymethylene thin film, generated on a gold surface by gold-catalyzed decomposition of diazomethane, was annealed and gently rubbed in a fixed direction by a flannelette cloth to serve as an alignment layer during the deposition of pentacene molecules. Various surface analysis techniques, including reflection absorption IR spectroscopy (RAIRS), near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, grazing incidence X-ray diffraction (GIXD), and atomic force microscopy were used to elucidate the structural details of the polymethylene and the pentacene thin films deposited on it. Two crystalline morphologies of pentacene thin film were observed: the minor one of rod-like molecular crystals having their long axes of the crystals perpendicular to the rubbing direction, and the dominant one of platelet-like and layered crystals having the molecular axes stand near vertical to the surface. Moreover, GIXD revealed that the rubbing on polymethylene indeed induced a preferential azimuthal alignment of pentacene crystallites. The deposition of pentacene at 25 degrees C led to a twin growth of crystallites with the [110] direction predominately aligned perpendicular to the rubbing direction. In contrast, the pentacene deposition at 50 degrees C produced twinned crystallites of lower twin angle and the [120] direction aligned parallel to the rubbing direction.     

Structure of thermally treated oxadiazoleamide Langmuir-Blodgett films

The thermal treatment of Y-type Langmuir-Blodgett (LB) films formed from the amphiphilic derivative of 2,5-diphenyl-1,3,4-oxadiazole 1 results in changes of the molecular packing. These changes have been analysed by a combination of X-ray specular reflectivity data, X-ray grazing incidence diffraction data and scanning force microscopy images. On the basis of these experimental data we have simulated possible supramolecular structures. These simulations provide insight into the intermolecular interactions giving rise to the observed structural transitions. The crystalline structure induced by thermal treatment of the LB films is chracterized by a uniaxial texture, which is correlated with the dipping direction during deposition of the LB film.     

Effect of Film Thickness on the Columnar Packing Structures of Discotic Supramolecules in Thin Films

The effects of film thickness on the columnar packing structure of discotic supramolecules in a thin supported film have been investigated by grazing‐incidence small‐angle X‐ray scattering technique using magnetically aligned cobalt octa(n‐decylthio)porphyrazine (CoS10) films on octadecyltrichlorosilane (OTS)‐functionalized substrates as model systems. Magnetically aligned CoS10 films with a range of film thicknesses (49–845 nm) form uniaxially oriented ‘edge‐on’ columnar superstructures with their columnar directors perpendicular to the applied magnetic field. However, the orientational ordering of the columnar packing in the plane perpendicular to the applied magnetic field is strongly dependent on the film thickness. While being damped by the elasticity of the side chains of CoS10, the strong interfacial interaction at the film‐substrate interface propagates up to 50–100 nm from the substrate, maintaining the orientation of columnar packing in the plane perpendicular to the applied magnetic field. When the distance from the film‐substrate interface becomes larger than about 100 nm, symmetric tilting of columnar layer orientation, which saturates at 11.5°, occurs due to longitudinal edge dislocations induced by accumulated elastic deformation.     

Thin film structure of tetraceno[2,3-b]thiophene characterized by grazing incidence X-ray scattering and near-edge X-ray absorption fine structure analysis

Understanding the structure-property relationship for organic semiconductors is crucial in rational molecular design and organic thin film process control. Charge carrier transport in organic field-effect transistors predominantly occurs in a few semiconductor layers close to the interface in contact with the dielectric layer, and the transport properties depend sensitively on the precise molecular packing. Therefore, a better understanding of the impact of molecular packing and thin film morphology in the first few monolayers above the dielectric layer on charge transport is needed to improve the transistor performance. In this Article, we show that the detailed molecular packing in thin organic semiconductor films can be solved through a combination of grazing incidence X-ray diffraction (GIXD), near-edge X-ray absorption spectra fine structure (NEXAFS) spectroscopy, energy minimization packing calculations, and structure refinement of the diffraction data. We solve the thin film structure for 2 and 20 nm thick films of tetraceno[2,3-b]thiophene and detect only a single phase for these thicknesses. The GIXD yields accurate unit cell dimensions, while the precise molecular arrangement in the unit cell was found from the energy minimization and structure refinement; the NEXAFS yields a consistent molecular tilt. For the 20 nm film, the unit cell is triclinic with a = 5.96 A, b = 7.71 A, c = 15.16 A, alpha = 97.30 degrees, beta = 95.63 degrees, gamma = 90 degrees; there are two molecules per unit cell with herringbone packing (49-59 degree angle) and tilted about 7 degrees from the substrate normal. The thin film structure is significantly different from the bulk single-crystal structure, indicating the importance of characterizing thin film to correlate with thin film device performance. The results are compared to the corresponding data for the chemically similar and widely used pentacene. Possible effects of the observed thin film structure and morphology on charge carrier mobility are discussed.     

Regular two-dimensional molecular array of photoluminescent Anderson-type polyoxometalate constructed by Langmuir-Blodgett technique

A regular two-dimensional photoluminescent array of Anderson-type polyoxometalates (POMs) was constructed as built-up Langmuir-Blodgett (LB) films. LB films of hexatungstoantimonate (SbW(6)) and -manganate (MnW(6)) were successfully fabricated by using dimethyldioctadecylammonium (DODA) as cationic partner, while hexamolybdochromate (CrMo(6)) was unsuccessful. Specular X-ray reflectivity (SXR) and grazing incidence X-ray diffraction (GIXD) measurements revealed that both SbW(6)/DODA and MnW(6)/DODA LB films exhibited well-ordered layers consisting of periodic arrangement of the planar-structured Anderson-type molecules. Surprising periodicity was observed in SbW(6)/DODA LB film, in which the distance between SbW(6) and DODA layers was 4.40 nm, and SbW(6) anions would form a two-dimensional square lattice with a length of 1.4 nm. SbW(6)/DODA LB films exhibited photoluminescence at 77 K, while emission spectra were observed at room temperature for SbW(6) solid.     

Supramolecular assembly at interfaces: formation of an extended two-dimensional coordinate covalent square grid network at the air-water interface

Reaction of a Langmuir monolayer of an amphiphilic pentacyanoferrate(3+) complex with Ni(2+) ions from the subphase results in the formation of a two-dimensional iron-nickel cyanide-bridged network at the air-water interface. The network can be transferred to various supports to form monolayer or multilayer lamellar films by the Langmuir-Blodgett (LB) technique. The same network does not form from homogeneous reaction conditions. Therefore, the results demonstrate the potential utility of an interface as a structure director in the assembly of low dimensional coordinate covalent network solids. Characterization of the LB film extended networks by X-ray photoelectron spectroscopy (XPS), FT-IR spectroscopy, SQUID magnetometry, X-ray absorption fine structure (XAFS), and grazing incidence synchrotron X-ray diffraction (GIXD) revealed a face-centered square grid structure with an average domain size of 3600 A(2). Magnetic measurements indicated that the network undergoes a transition to a ferromagnetic state below a T(c) of 8 K.     

Changes in the near-edge X-ray absorption fine structure spectra of long-chain diacetylene derivatives through photopolymerization in Langmuir–Blodgett films

Photopolymerization of cadmium 10,12-pentacosadiynoate (CdDA) in Langmuir–Blodgett (LB) films, with the molecular packing well arranged by moderate preannealing, was investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Greenish films of polydiacetylene with an absorption wavelength of 705 nm were obtained through the photopolymerization of preannealed monomer LB films, and this resulted in an extended π-conjugate system based on the well-ordered monomer in a two-dimensional arrangement. The electronic structures of the polydiacetylenes were found to be correlated to the variation of the molecular arrangements in the films from the changes in the NEXAFS spectra through photopolymerization in the LB films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2329–2336, 2004     

不含亲水基团的偶氮苯衍生物L-B膜的制备和性质研究

本文合成了具有一定结构特点的偶氮苯的衍生物, 以元素分析和^1HNMR鉴定了B产物的组成和结构。采用L-B技术制备了其多层L-B膜, 以紫外可见光谱研究了膜中分子的聚集状态和膜的纵向均匀性; 以偏振紫外确定了膜中分子偶氮基的取向; L-B膜的小角度X射线衍射结果表明膜具有层状有序的周期性结构。     

一种含苯并菲侧基的“毛-棒”状梯形聚倍半硅氧烷LB膜研究(英文)

一种新的含烷基取代的苯并菲侧基的"毛-棒"状(hairy-rod)梯形聚倍半硅氧烷(LPSQ)可以在空气-水界面形成稳定的单分子层,研究了温度、铺展溶剂和浓度对π-A等温曲线的影响.在适当的表面压下,以甲苯为铺展溶剂该单分子层可以被成功地转移至疏水的硅片或石英片上形成均一稳定的Y-型LB膜,其紫外吸收强度在几个月内均保持不变,说明该LB膜具有良好的稳定性,AFM图像表明其形成了均一致密的膜.通过偏振紫外光谱和荧光光谱研究了其面内各向异性,发现LPSQ的分子链采取了平行于拉膜方向的优先取向,最优取向因子S为0.42.     

胆红素及其两亲衍生物的Langmuir-Blodgett膜研究

研究了亚相酸度和金属离子对胆红素(1)及其两个两亲衍生物胆红素二(十八烷基)酯(2)和胆红素二(十八烷基)酰胺(3)的单分子膜和LB膜性能的影响.通过π-A等温线、X射线光电子能谱、紫外-可见光谱等方法,研究了它们在有序分子膜中的分子伸展及与金属离子的配位方式.胆红素及其两亲衍生物与金属离子在有序分子膜中的配位(生成1:1型配合物)明显不同于其在本体溶液中的配位(1:1,1:2或2:1型配合物).小角X射线衍射表明1,2和3形成双层膜间距分别为2.15,5.55和5.65nm的Y型LB膜.     

NO2 gas detection by Langmuir-Blodgett films of copper phthalocyanine multilayer structures

Copper (II) phthalocyanine derivatives with four alkyl chains were synthesized. Langmuir-Blodgett (LB) films of the following two compounds were deposited: Cu(II)[tetrakis(3,3-dimethyl-butoxycarbonyl)] phthalocyanine and Cu(II)[tetrakis(n-butoxycarbonyl)] phthalocyanine. Moreover, LB films from a 1:1 mixture of the two compounds were prepared. All isotherms and optical data were consistent with the molecules being stacked nearly edge-on to the substrate, with the molecular faces having a preferred orientation perpendicular to the dipping direction. The dynamic response characteristics of the electrical conductance of the LB films to different NO₂ concentrations in dry air are described. A relationship has been observed between the anisotropic molecular orientation and the electrical conductivity parallel to the substrate.     

Molecular Orientation and Structural Characterization of Ultrathin Films of C12AzoNaph(1,4)C6N-SDS Studied by FT-IR and NIR-SERS Spectroscopies

IntroductionAzobenzene- containing long- chain fatty acidsand their ammonium amphiphiles have recentlyaroused a great interest of some researchersbecause of their promising photochromicproperties[1— 6 ] . In order to understand theinteresting physical properties the LB films withazo chromophores show,a structure- functionrelationship of the films must be explored.Thusfar,infrared spectroscopy has been usedextensively for the investigations of molecularaggregation,orientation and structuralch…     

The Electrical Double Layer at Hydrous Manganese Dioxide/Electrolyte Interface

We present here a study of a tetrathiafulvalene derivative, tetrakis(octadecylthio)tetrathiafulvalene (TTFH), arranged in LB films together with a detailed characterization process by means of UV-vis, IR, SEM, and X-ray diffraction that has allowed us to propose a packing model. These films were exposed to iodine vapor and this doping process was carefully followed using UV-vis and IR spectroscopy. The redox properties of the TTFH were studied in both organic solution and LB films. The results have been interpreted in terms of the molecular structure and the LB film architecture. Copyright 2001 Academic Press.     

Surface-enhanced Raman scattering and micro-Raman imaging of Langmuir-Blodgett films of rhodium phthalocyanine

Rhodium phthalocyanine (RhPc) was synthesized and ultra thin Langmuir-Blodgett (LB) films of RhPc were successfully fabricated. The LB film characterization was carried out using both UV-vis absorption spectra and Raman scattering. The Raman spectroscopy was carried out using 633 and 780 nm laser lines. LB films were deposited onto Ag nanoparticles to achieve the surface-enhanced pre-resonance Raman scattering (pre-SERRS) and surface-enhanced Raman scattering (SERS) for both laser lines, respectively, which allowed the characterization of the RhPc ultra thin films. The morphology of the LB RhPc neat film is extracted from micro-Raman imaging.     

Highly ordered polymer films of amphiphilic, regioregular polythiophene derivatives

The fabrication and characterization of highly ordered thin films made from amphiphilic, regioregular polythiophene derivatives are described. Films of poly(3-(11-(2-tetrahydropyranyloxy)undecyl)thiophene (PTHPUDT) were prepared by the Langmuir-Blodgett technique. The amphiphilic nature of the polymer affords layer-by-layer deposition and the formation of multilayer films of head-to-head and tail-to-tail Y-type structure. X-ray diffraction studies indicate bilayer separations of approximately 30 A. Anisotropic optical absorption in the plane of the film indicates that the thiophene backbones are preferentially oriented along the dipping direction. Further, polarized light microscopy studies indicate that these films are highly birefringent and that the optical retardation is uniform over the entire film. Ellipsometry studies confirm the sizable magnitude of the birefringence. Optical second-harmonic generation studies of multilayer films provide information regarding both the thiophene orientation within the film and the anisotropic distribution of chromophores in the surface plane. Taken together, these data offer strong evidence of highly ordered films in which the hydrophobic polythiophene chains lie parallel to the substrate surface with their alkyl chains oriented normal to the surface, as dictated by the hydrophilic nature of the alkyl chain's terminal tetrahydropyran functional group. As such, these films offer the potential for elucidating the connection between polymer morphology and physical property in materials that are otherwise subject to a sufficiently complex distribution of morphologies that such a correspondence is precluded.     

Thermal switching of the optical anisotropy of a macroscopically aligned film of a discotic liquid crystal

We have studied the temperature dependence of anisotropy in the optical absorption and charge transport properties of an aligned film of hexakis-dodecyl-hexa-peri-hexabenzocoronene (HBC-C12) formed by zone-casting on a quartz substrate. At room temperature the film displays a large anisotropy in (photo)conductivity, as determined using the flash photolysis time-resolved microwave conductivity technique, with charge transport in the casting direction favoured by a factor of at least 10. The anisotropy in the optical absorption is however negligible. At the temperature corresponding to the transition from the crystalline solid to the liquid crystalline mesophase (c. 110°C), the optical anisotropy increases abruptly, with absorption of light polarized in the direction perpendicular to the alignment direction favoured by a factor of c. 3. On cooling, the dichroism reverts to its initial very low value with a hysteresis of c. 30°C. The results are explained in terms of a reversible change in the orientation of the molecules with respect to the axis of the aligned columnar stacks from tilted (at c. 45°) in the crystalline phase to close to orthogonal in the liquid crystalline phase.     

四(十六烷硫基)四硫富瓦烯/硬脂酸混合LB膜的结构研究

我们考察了四(十六烷硫基)四硫富瓦烯/硬脂酸(THT-TTF:SA=1:n)在气-液界面的聚集状态及在LB膜中的排列,当n=1时,THT-TTF分子在气-液界面形成了双分子膜;当n>6时,THT-TTF分子形成了单分子膜;1相似文献   

Fluorescent and highly stable unimodal DMPC based unilamellar vesicles formed by spontaneous curvature

The formation of uniform and highly stable unilamellar vesicles (ULVs) and the theory behind it are ongoing tasks within the vesicle community. Herein, we report the formation of highly stable, fluorescent, and unimodal 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) based ULVs with an average size of ~100 nm, as determined by cryogenic transmission electron microscopy (cryo-TEM) and dynamic light scattering (DLS). The ULVs are formed by mixing a two-component powder mixture or mixed lipid film of DMPC and 5 mol % of a novel amphiphilic carbenium salt, sodium 2-didecylamino-6,10-bis(N-methyltaruino)-4,8,12-trioxatriangulenium (Na-DSA) in aqueous solution when subjected to shaking. We propose that the high stability and the unimodal size distribution of the 5% DSA ULVs confirmed by DLS studies are a product of spontaneous curvature. UV-vis absorption/emission studies reveal that the structure of DSA promotes a strong interaction between the DMPC and the DSA to take place due to the complementary charge distribution of the DSA and DMPC head groups. The strong interaction may introduce an asymmetric amphiphile composition in the inner and outer leaflet of the bilayer which drives the spontaneous curvature.