完全重叠色谱峰的二维微分色谱解析算法

利用完全重叠的色谱峰中同时消失的两组分的浓度变化速率差异，通过二维数据微分色谱法获取被掩盖组份的近似光谱，以解析完全重叠的色谱体系，将该法应用于维生素Ｃ和菸酸两组份完全重叠的二维色谱之分辨，结果令人满意，分辨光谱与标准光谱重合甚好。     

模差渐进投影法解析重叠色谱峰

提出了一种鉴别重叠色谱峰类型的化学计量学方法——模差渐进投影(MDEP)法。该方法利用二维色谱数据中相邻两个色谱流出点的光谱矢量模的和与该两个矢量和的模之差,建立模差-时间(dm-t)曲线判断非纯色谱峰的纯组分区,同时判定第二组分色谱流出点和倒数第二组分色谱结束点。分别以纯组分区的光谱矢量建立正交阵对该色谱峰进行投影运算,得到投影后转换色谱。该转换色谱消除了纯组分区所对应化合物的色谱和光谱信息。对转换色谱重复上述操作至整个色谱峰的模差-时间曲线均为0时终止,得到重叠色谱峰各组分的色谱流出点和结束点。利用上述结果,采用不包含待测组分光谱信息的该重叠峰二维色谱数据建立正交矩阵对该色谱峰进行投影运算,获得待测组分的相似色谱图。通过比对分析即可得到该组分在重叠色谱峰中的光谱和色谱信息。依次操作,即可获得重叠色谱峰中各组分的光谱和色谱信息。采用模差渐近投影法对4组分模拟重叠二维色谱峰及杜香挥发油GC-MS的重叠色谱峰进行了解析,方法简便、结果准确。     

直观推导式演进特征投影法解析多环芳烃的重叠色谱峰

用高效液相色谱法(HPLC)测定多环芳烃时,因芴、苊和菲,茚(1,2,3-cd)芘和苯并(g,h,i)苝的色谱峰严重重叠而影响测定结果。本研究用高效液相色谱-二极管阵列检测器(DAD)和荧光检测器(FLD)测定多环芳烃,在激发波长λex=230nm,发射波长λem=300～500nm范围内采集重叠峰的HPLC-FLD二维色谱数据,再用直观推导式演进特征投影法(HELP)解析它们的重叠色谱峰,分辨结果令人满意。该方法对重叠组分的分辨下限为0.02mg/L。结果表明,用二维色谱荧光数据解析色谱重叠峰,灵敏度更高,可用于环境样品中多环芳烃的测定。     

联用色谱数据的双窗口因子分析

利用组分光谱的特征信息,发展了一种能直接对联用色谱重叠峰中组分进行定性定量分析的新方法──双窗口因子分析（dualwindowfactoranalysis,DWPA）。该法可从多组分重叠峰中定性目标组分,且在未经其它组分的分辨下可直接对目标组分的光谱、色谱进行分辨。因此更适应于联用色谱对复杂体系中待测组分的定性定量分析。用该法成功地对4组分重叠峰进行了分析,实验结果令人满意。     

正交投影用于一维重叠色谱峰分辨及背景扣除

对于两组份色谱重叠峰体系,当以小组份色谱峰作为干扰时,本文利用正交投影方法,通过构造正交投影矩阵,利用原始信号及其投影与背景之间的内在关系来确定真实背景,从而将背景干扰予以扣除,使含背景干扰的一维重叠色谱峰得以分辨。模拟研究表明,对于两组份色谱峰重叠体系当以小色谱峰为干扰时本文方法具有很好的分辨效果,对于完全重叠峰,即使其峰分离度为零能得到满意的结果。     

断层扫描分析法用于联用色谱二维数据的解析Ⅱ. 定量分析:原理与应用

提出了一种全新的色谱一光谱二维数据信息处理手段——断层扫描分析法。本研究介绍断层扫描分析法的定量分析原理：在重叠色谱峰簇中,每个色谱保留时间处都可得到一条光谱“断层”;针对不同的光谱“断层”,可结合褶合曲线分析法进行定量分析,并最终获得重叠色谱峰簇中待测组分的定量信息。用断层扫描分析法对一实验体系进行了定量分析,结果满意。     

免疫算法用于多组分二维色谱数据的解析

通过对免疫系统抗体对抗原消除作用及其记忆功能的模拟,提出了解析二维数据矩阵的新方法。采用模拟的EMG公式作为抗体输入,对二维信号逐行进行迭代消除,从重叠峰中提取单一组分的色谱信息和光谱信息。通过对二维色谱数据的解析,结果表明,该方法可方便地用于多组分重叠二维色谱的解析。     

基于分形理论分辨重叠峰的新算法

将分形理论用于仪器分析信号的解析,提出一种面向分析谱图中重叠信号处理的分形分辨算法.通过对信号进行分形分析,采用分形维数可有效地反映信号的特征,准确地得到谱峰个数和位置的信息,避免人为判断的误差,实现重叠复合信号的分辨.实验表明,这种新的重叠谱峰分辨法能用于光谱、电化学、色谱等仪器分析数据的处理     

直观推导式演进特征投影法对环境样本中多环芳烃的定性定量分析

基于新近发展的直观推导式演进特征投影法(HELP), 本文提出了一个对二维数据进行同时定性定量的分析方法, 并将其成功地用于环境样本中多环芳烃化合物定量解析。对于一维色谱难以定量的重叠峰, HELP方法充分利用色谱、光谱两方面的选择性信息, 得到了具有真实物理意义的唯一解。在定性分辨结果的基础上, 本文还提出了三种可能的定量方法。这种二维数据的解析新方法, 能大幅度地降低对色谱分离条件的要求, 可直接用于复杂实际样本的定性定量分析。     

基于稀疏模型的气相色谱-质谱数据解析及其在严重重叠峰解析中的应用

提出一种气相色谱-质谱（GC-MS）数据解析算法。以色谱峰顶点处的质谱作为待测谱,在谱库中检索一定量相关参考谱,求解关于各纯组分色谱响应值的方程。质谱检索采取分步策略,先利用质谱碎片规律建立高速索引进行粗选,然后使用强峰高概率出峰准则和耐挤压性准则排除无关质谱。为求解色谱响应值方程,提出基于稀疏模型的回归算法,相比传统算法,稀疏算法利于提取待测谱的主要结构,避免"过拟合"。实验结果表明,该质谱检索算法具有较高的精度和规模较小的剩余参考谱集,而所提稀疏模型算法可有效解析严重重叠峰。该算法可作为GC-MS重叠峰解析,特别是严重重叠峰解析的一种有效解决方案。     

正交投影用于多波长色谱重叠峰分析

 将正交投影分辨 (OPR)技术用于多波长色谱重叠峰分辨 ,当色谱峰中最大重叠度小于或等于波长数时 ,用这一方法能从多波长色谱重叠峰中获得完全真解。基于双波长色谱分析 ,提出了一种新的色谱重叠峰中背景校正、组分数和纯组分信号区确定以及各组分重叠情况的分析方法 ,即双波长特征信息分析 (DWCI)。该法被成功的用于三组分双峰和双组分单峰重叠色谱的分析。     

The investigation of the resolution enhancement transformation and the analysis of complex overlapping peaks in gamma-ray spectra

A method is proposed for the resolution enhancement transformation (RET) of the γ-ray spectrum, which is not only a simple convolution operation but also have a definite analytical significance because of the introduction of the parameter ω representing the degree of the resolution enhancement. We apply the RET to the peak detection method for complex overlapping peaks. The validity of this method is ascertained by the analysis of X-ray overlapping peaks.     

小波包分析用于重叠分析化学信号的处理

对小波包分析的算法进行了改进,并将此算法成功地应用于多组分重叠色谱信号的解析.结果表明,本文提出的算法解决了MRSD算法的不足,更适合处理分析化学信号,用于重叠信号的解析时不需重构(逆变换),简化了数据处理步骤,加快了数据解析速度,具有较强的解析能力.对于重叠色谱信号的解析,小波包分析比小波分析具有更强的解析能力.     

Resolving multiple overlapping calorimetric transitions by use of a microcomputer: studies on erythrocyte membranes

Buffer changes and certain drugs cause temperature shifts, amplitude changes, and transition broadening in the differential scanning calorimetric (DSC) analysis of erythrocyte membranes. However, it has been difficult to interpret and quantitate these shifts and changes because the scans are composed of multiple overlapping transitions and because more than one transition may be simultaneously affected. An empirical approach has been developed by using Gaussian modeling to resolve these calorimetric transitions. Data analysis was carried out on a microcomputer using a nonlinear regression program (PCNONLIN) to fit the data scans. These results show that changes in the calorimetric scans of erythrocyte membranes due to alterations in the buffer environment, such as pH and osmolarity, can be resolved by fitting the data scans with the proposed mathematical model and optimizing the resolution parameters with PCNONLIN. In addition, resolution uncovered hidden characteristics that may not have been readily evident. Under certain conditions, for example, apparent transition shifts were shown to actually be amplitude changes and transition broadening. Determination of the limitations and validity of this method was accomplished with simulation studies. This technique offers a simple means for fitting overlapping DSC transitions by use of a commercially available nonlinear regression program that can be run on a microcomputer.     

Local resolution of two-way data from multicomponent equilibria

A self-modeling curve resolution (SMCR) method is proposed to calculate concentration and spectral profiles for the two-way spectral data from an equilibrium containing several chemical components. The proposed method has three main distinctive steps: (i) fixed size moving window evolving factor analysis (FSMWEFA) is used to identify the selective and zero concentration regions for a desired component, (ii) orthogonal projection resolution (OPR) is used to calculate its concentration profile and (iii) the component striping is done directly to resolve other components. The results of simulated and real polyprotic acid dissociation equilibria showed that the proposed combined method performs well even in situation when the successive stepwise equilibrium constants are close to each other. The applicability of method for resolving the triprotic acid system with rank deficiency due full spectral overlapping of two involved chemical species also is shown.     

Computer-assisted optimization of reversed-phase HPLC isocratic separation of neutral compounds

An appropriate optimization strategy should be used to find a desired resolution or selectivity with a minimum number of experiments in a limited time, which could assure the baseline separation of all target compounds. It was usually realized by means of a specialized computer program. In this paper, mapping optimization method and overlapping resolution mapping were compared for the optimization of a reversed-phase high-performance liquid chromatography (HPLC) isocratic separation of neutral compounds. The calculated resolutions and separation time of 7 to 10 experiments are fitted by different equations, which were used to build a contour plot with a minimum effective resolution and maximum retention time as a function of a mobile phase composition. The balance between resolution and analysis time could be easily realized by the overlapping of the final overlapping resolution mapping and analysis time mapping. The validity of the two methods was confirmed by some typical experiments. The models are simple, visual, and common without theoretical arithmetic.     

Application of Multivariate curve resolution-alternating least square methods on the resolution of overlapping CE peaks from different separation conditions

Discussed in this paper is the development of a new strategy to improve resolution of overlapping CE peaks by using second-order multivariate curve resolution with alternating least square (second-order MCR-ALS) methods. Several kinds of organic reagents are added, respectively, in buffers and sets of overlapping peaks with different separations are obtained. Augmented matrix is formed by the corresponding matrices of the overlapping peaks and is then analyzed by the second-order MCR-ALS method in order to use all data information to improve the precision of the resolution. Similarity between the resolved unit spectrum and the true one is used to assess the quality of the solutions provided by the above method. 3,4-Dihydropyrimidin-2-one derivatives (DHPOs) are used as model components and mixed artificially in order to obtain overlapping peaks. Three different impurity levels, 100, 20, and 10% relative to the main component, are used. With this strategy, the concentration profiles and spectra of impurities, which are no more than 10% of the main component, can be resolved from the overlapping peaks without pure standards participant in the analysis. The effects of the changes in the components spectra in the buffer with different organic reagents on the resolution are also evaluated, which are slight and can thus be ignored in the analysis. Individual data matrices (two-way data) are also analyzed by using MCR-ALS and heuristic evolving latent projections (HELP) methods and their results are compared with those when MCR-ALS is applied to augmented data matrix (three-way data) analysis.