Polymerization of surface-active monomers. VIII. Tacticity of polymers prepared by radical polymerization of quaternary salts of dimethylaminoethyl methacrylate in micellar and isotropic media

The effect of monomer micellization on the polymerization was studied from the standpoint of stereochemistry in the polymerization. Quaternary salts (C_nBr) of dimethylaminoethyl methacrylate with n-alkyl bromide having N (=4, 8 and 12) carbon atoms were polymerized with radical initiators in isotropic and anisotropic media and the resulting polymers were converted to poly (methyl methacrylate) (PMMA) to determine their tacticity. Tacticities of poly (C₁₂Br)s were little affected by initiators and solvents used for their preparations. There was little dependence of the tacticities on alkyl chain length (N) for poly (C_nBr)s prepared in water and dimethylformamide (DMF). Most of polymers produced here conformed to Bernoullian propagation statistics and a definite difference was not found in the tacticities between the polymers prepared in isotropic and anisotropic media. From the results obtained here it was deduced that the micellar aggregation has little influence upon the stereochemistry in the polymerization of the quaternary monomers. © 1994 John Wiley & Sons, Inc.     

Polymerization of oriented monomers. V. Radiation-induced polymerization of 3n-dodecyl-1-vinylimidazolium iodide in micellar aggregates

In the present study radiation-induced polymerization of 3n-dodecyl-1-vinylimidazolium iodide (I) in micellar aggregates was investigated. For comparison, the corresponding isotropic polymerization of I was also studied. Micellization was obtained in concentrated aqueous solutions; that is, above the monomer's critical micelle concentration (CMC) polymers obtained by both modes of polymerization were treated similarly and subsequently subjected to physical characterization. The main purpose of this study was to investigate whether the degree of organization of the monomer in micelles would affect polymer properties. Attempts to determine tacticity by ¹³C-NMR spectrometry failed because of the particular structure of the polymer. Crystallization of these polymers from ethyl alcohol or acetone was not possible as indicated by x-ray powder diffraction patterns that were characteristic of amorphous polymers. On the other hand, viscosity data of polymers do not depend on the mode of polymerization. It is therefore concluded that micellar aggregates are not sufficiently organized to affect polymer properties.     

Synthesis of polymeric nanocapsules with a crosslinked shell through interfacial miniemulsion polymerization

A water‐soluble comonomer, N‐isopropylacrylamide (NIPAM), and an oil‐soluble crosslinker, divinylbenzene (DVB), have been combined in a system for the synthesis of nanocapsules with crosslinked shells through interfacial miniemulsion polymerization by encapsulating a liquid nonsolvating hydrocarbon. Oligomers of poly(N‐isopropylacrylamide) (PNIPAM) were dehydrated and separated from the aqueous phase and were adsorbed by the nanodroplets or latex particles and then anchored at their interfaces by means of a crosslinking reaction. Nanocapsules were then formed through encapsulation of the hydrocarbon by the newly produced polymers at the interfaces of the droplets. The crosslinked structure gradually grew to stabilize the shell morphology. The incorporation of NIPAM into the shell copolymers has been verified by FTIR and solid‐state ¹³C NMR data. The fact that the number of nanocapsules increases with increasing amounts of DVB and NIPAM supports the formation of nanocapsules following interfacial (co)polymerization. Therefore, a mechanism for the formation of nanocapsules through interfacial (co)polymerization induced by NIPAM and DVB is proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1522–1534, 2009     

Strategy for rational control of stereosequence in free radical polymerization of acrylates

Radical polymerization of cyclic analogs of acrylates, (S)‐ and (R)‐2‐isopropyl‐5‐methylene‐1,3‐dioxolan‐4‐ones ( 1S and 1R ), successfully afforded a functional polymer having the tacticity continuously controlled from 29% to ∼100% of meso triad (mm) over a wide range of temperature only by changing the molar ratio of 1S / 1R in feed. Plot of the number fractions of the triad versus diad of poly( 1 ) was in good agreement with the Bernoulli statistics. In the polymerization in chiral solvents having analogs structure of the monomers, the tacticity and specific rotation of the resulting polymer were specifically varied depending on the structure and concentration of the solvents. Model propagation reaction at dimeric radical calculated with density functional theory reproduced a methodical induction of the chirality to the main chain from the branched chiral monomeric unit, which supports the experimental expectations. It is remarkable that the ceiling temperature of 1 is tremendously high, for example, 193 °C in [ 1 (ee = 72.6%)] = 0.05 mol/L, and the isospecific polymerization is maintained even at such a high temperature, which enabled the control of polymer tacticity over a wide range of temperature. The mechanism of the stereosequence in radical polymerization was discussed experimentally and theoretically. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 184–193     

Poly(methylene sebacate): Synthesis and characterization

The synthesis of poly(methylene sebacate) was carried out via the reaction of cesium sebacate with bromochloromethane in N-methylpyrrolidone over a range of temperatures (55–130°C). A number of polymers having limiting viscosity numbers in the range of 0.29–0.94 dL g^?1 (CHCl₃; 25°C) were characterized by elemental analyses, ¹H- and ¹³C-NMR, DSC, and GPC techniques. The polymerization was found to be very rapid at 100°C, being complete in ca. 15 min. and was relatively insensitive to the stoichiometric ratio of the monomers. As high molecular weight polymers were produced without the quantitative conversion of the reactants, the polymerization is considered to be occurring by an interfacial mechanism.     

Polymerization of surface-active monomers. II. Polymerization of quarternary alkyl salts of dimethylaminoethyl methacrylate with a different alkyl chain length

The cationic monomers (C_NBr), obtained by quarternization of dimethylaminoethyl methacrylate with n-alkyl bromide containing varying carbon number (N = 4, 8, 12, 14, and 16) were polymerized with radical initiators in water and various organic solvents. The degree of polymerization of the resulting polymers was determined by GPC measurements on poly(methyl methacrylate) samples derived from them. The rate of polymerization of the micelle-forming monomers (N = 8, 12, 14, and 16) in water increases with increasing a chain length of alkyl group, whereas it is little dependent on N in isotropic solution in dimethylformamide. The data on the degree of polymerization for the polymers of C₄Br, C₈Br, and C₁₂Br show that the polymerization of C₁₂Br with azo initiators in water and benzene gives polymers with a very high degree of polymerization. The results obtained here suggest that highly developed or relatively rigid, aggregated structures of monomers in solution are responsible for the formation of the polymers with a very high degree of polymerization, in addition to an enhanced rate of polymerization. Also considered are the relation of the molecular weight of poly(C₁₂Br) to the viscosity data in chloroform and methanol.     

Effect of temperature and solvent on polymer tacticity in the free‐radical polymerization of styrene and methyl methacrylate

The effect of temperature and solvent on polymer tacticity in free‐radical polymerization of styrene and methyl methacrylate was studied by ¹³C and ¹H NMR, respectively. Polystyrene shows a mild syndiotactic tendency (P_m = 0.36 ± 0.02) that is independent of temperature over a wide range (?10 to 120 °C), while poly(methyl methacrylate) shows a stronger syndiotactic tendency (P_m = 0.17 ± 0.01 at 30 °C) that decreases as temperature is increased (P_m = 0.22 ± 0.02 at 80 °C). None of the polymerization solvents studied (bulk, THF, DMF, DMSO, acetonitrile, and acetone) had a significant effect on polymer tacticity in either system. The triad fractions of both polymers showed deviations from the Bernoulli model, implying that the antepenultimate unit affects the propagation reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3351–3358     

Influence of alkoxy tail length on the self‐organization of hairy‐rod polymers based on mesogen‐jacketed liquid crystalline polymers

A series of hairy‐rod polymers, poly{2,5‐bis[(4‐alkoxyphenyl)oxycarbonyl]styrenes} (P‐OCm, m = 1, 2, 4, 6, 8, 10, 12, 14, 16, and 18) were designed and successfully synthesized via free radical polymerization. The chemical structure of the monomers was confirmed by elemental analysis, ¹H NMR and ¹³C NMR. The molecular characterizations of the polymers were performed with ¹H NMR and gel permeation chromatography. The phase structures and transitions of the polymers were investigated by the combination of techniques including differential scanning calorimetry, wide‐angle X‐ray diffraction, polarized optical microscopy, and rheological measurement. The experimental results revealed that the self‐assembly behaviors of P‐OCm changed with the increase in m. First, the P‐OCm (m = 1, 2) showed only a stable liquid crystalline phase above T_g. Second, with the increasing length of alkoxy tails, the P‐OCm (m = 4, 6, 8) presented a re‐entrant isotropic phase above T_g and a liquid crystalline phase at higher temperature. Third, the P‐OCm (m = 10, 12, 14, 16, 18) exhibited an unusual re‐entrant isotropic phase which was separating SmA (in low temperature) and columnar phases (in high temperature). It was the first time that mesogen‐jacketed liquid crystalline polymers formed smectic phase, re‐entrant isotropic phase, and columnar phases in one polymer due to the microphase separation and the driving force of the entropy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). V. Kinetics of initial template polymerization

The influence of stereoregular poly(methyl methacrylate) (PMMA) as a polymer matrix on the initial rate of radical polymerization of methyl methacrylate (MMA) has been measured between ?11 and +60°C using a dilatometric technique. Under proper conditions an increase in the relative initial rate of template polymerization with respect to a blank polymerization was observed. Viscometric studies showed that the observed effect could be related to the extent of complex formation between the polymer matrix and the growing chain radical. The initial rate was dependent on tacticity and molecular weight of the matrix polymer, solvent type and polymerization temperature. The accelerating effect was most pronounced (a fivefold increase in rate) at the lowest polymerization temperature with the highest molecular weight isotactic PMMA as a matrix in a solvent like dimethylformamide (DMF), which is known to be a good medium for complex formation between isotactic and syndiotactic PMMA. The acceleration of the polymerization below 25°C appeared to be accompanied by a large decrease in the overall energy and entropy of activation. It is suggested that the observed template effects are mainly due to the stereoselection in the propagation step (lower activation entropy Δ S_p^?) and the hindrance of segmental diffusion in the termination step (higher activation energy Δ E_t^?) of complexed growing chain radicals.     

Phenomenes de complexation entre un peroxyde et les monomeres vinyliques polaires etudies par resonance magnetique protonique

The self association of cumyl hydroperoxide and its complexing with polar monomers have been studied by proton magnetic resonance. These complexations are exothermic and strongly temperature dependent. It has been suggested that the complexation of cumyl hydroperoxide by polar monomers could be one of the causes of its efficiency in initiating the radical polymerization of vinyl monomers on an ethyl-zinc terminated polyethylene chain to form radical block copolymers. However, if this phenomenon has an effect on the initiation, it should not affect the propagation mechanisms, because the hydroperoxide is destroyed by ZnEt₂ during initiation. Moreover, the tacticity of radical polymethylmethacrylate, obtained at 60° with (ZnEt₂—cumyl hydroperoxide) in heptane does not differ from the conventional radical polymer.     

Interfacial tension and wetting behavior of air/oil/ionic liquid systems

We measured the interfacial tension and the density of air/n-hexane, n-decane, 1-perfluorohexane/1-hexyl-3-methyl-imidazolium hexafluorophosphate systems as a function of temperature. From the air/ionic liquid surface tension values, it was suggested that Coulombic interaction between imidazolium cations and counter anions are not so much different between the surface and bulk. The density values indicated that the decrease of surface tension by saturating organics was closely correlated to the mutual solubility between ionic liquid and organics. Interfacial tension at the oil/ionic liquid interfaces suggested that ionic liquid molecules were more ordered at the oil/ionic liquid interfaces compared to the air/ionic liquid interfaces, but the decrease of the entropy due to the interfacial orientation of ionic liquid was compensated by the increase of the entropy due to the contact of different chemical species. The initial spreading coefficients and the Hamaker constants indicated that all the oil phases spread at the air/ionic liquid interfaces spontaneously, and form the complete wetting films.     

Vinyl polymerization. 275. Polymerization of vinyl monomers photosensitized by tetramethyltetrazene

A study of the photopolymerization of vinyl monomers in the presence of tetramethyltetrazene (TMT) was made. TMT was found to act as an effective sensitizer. In the photopolymerization of vinyl monomers such as methyl methacrylate or styrene the rate of polymerization was expressed by the equation: R_p = k[TMT]^1/2[monomer]. The chain-transfer constant of TMT under ultraviolet irradiation was estimated to be 3.8 × 10^?2 for the above monomers. A linear correlation was found to exist between the reactivity of dimethylamino radical toward the vinyl monomers and e values for the corresponding monomers.     

Stereospecific radical polymerization of fluoroalkyl acrylates

The free‐radical polymerization of 2,2,2‐trifluoroethyl acrylate (TFEA), 1,1,1,3,3,3‐hexafluoro‐2‐propyl acrylate (HFiPA) and perfluoro‐tert‐butyl acrylate (PFtBA) was carried out under various conditions and the stereostructure of the obtained polymers was investigated. Most polymerizations of the three monomers afforded polymers rich in diad syndiotacticity (r) in bulk or in solution; the r‐specificity was higher in the HFiPA and PFtBA polymerization than in the TFEA polymerization. Although the tacticity was nearly independent of reaction temperature during the polymerization of TFEA, the r‐specificity increased by lowering the reaction temperature during the polymerization of the other two monomers. The polymerization stereochemistry was also affected by the reaction solvents including toluene, tetrahydrofuran, and fluoroalcohols. It was noted that the stereochemistry of the polymerization of HFiPA and PFtBA also depended on the monomer concentration, and a lower monomer concentration led to a higher r‐specificity. By optimizing the aforementioned reaction conditions, the poly(HFiPA) having r = 81% (polymerization in tetrahydrofuran at −98 °C at [M]_o = 0.2M) and the poly(PFtBA) having r = 77% (polymerization in toluene at −78 °C at [M]_o = 0.2M) were obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1024–1032, 2000     

Poly(DCAQI): Synthesis and characterization of a new redox‐active polymer

Redox‐active anthraquinone based polymers are synthesized by the introduction of a polymerizable vinyl and ethynyl group, respectively, resulting in redox‐active monomers, which electrochemical behaviors are tailored by the modification of the keto groups to N‐cyanoimine moieties. These monomers can be polymerized by free radical polymerization and Rh‐catalyzed polymerization methods, respectively. The resulting polymers are obtained in molar masses (M_n) of 4,400 to 16,800 g mol^?1 as well as high yields of up to 97%. The monomers and polymers are furthermore electrochemically characterized by cyclic voltammetry. The monomers exhibit two one‐electron redox reactions at about ?0.6 and ?1.0 V versus Fc⁺/Fc. The N‐cyanoimine units are, however, partially hydrolyzed during the polymerization step or during the electrochemical measurements and degenerate to carbonyl groups, resulting in a new reduction signal at ?1.26 V versus Fc⁺/Fc. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1998–2003     

Anisotropy of non-mesogenic polymer networks dispersed in a liquid crystal matrix

We report here original results characterizing in situ the interactions between a smectic liquid crystal phase and a polymer network dispersed in it. These results have been obtained by neutron scattering on smectic liquid crystal (8CB) samples containing a physical network of 1.5wt% polymer. The samples were polymerized in the isotropic, or in the smectic A phases. For the first time it is experimentally proved that the polymerization of non-mesogenic monomers in an aligned smectic A matrix induces anisotropy in the resulting network. The network becomes elongated along the liquid crystal director. When the polymerization is carried out in the isotropic phase the polymer network has an isotropic distribution even if a magnetic field, which orients the liquid crystal director, is later applied. On the other hand, studies show that after several thermal cycles, the liquid crystal orientational order still remained. Without other external constraints, the polymer network freezes the alignment of the liquid crystal. It is probably imposed by pendant reticulates on the diffuse liquid crystal-polymer interfaces.     

Vinyl polymerization. 416. Polymerization of vinyl monomer initiated by polyethyleneglycol

The polymerization of vinyl monomer initiated by polyethyleneglycol (PEG) in aqueous solution was carried out at 85°C with shaking. Acrylonitrile (AN), methyl methacrylate (MMA), and methacrylic acid were polymerized by PEG–300 (M?_n = 300), whereas styrene was not. The effects of the amounts of monomer and PEG, the molecular weight of PEG, and the hydrophobic group at the end of PEG molecule on the polymerization were studied. The selectivity of vinyl monomer and the effect of the hydrophobic group are discussed according to “the concept of hard and soft hydrophobic areas and monomers.” The kinetics of the polymerization was investigated. The overall activation energy in the polymerization of AN was estimated as 37.9 kJ mol^?1. The polymerization was effected by a radical mechanism.     

s‐Triazine‐based hyperbranched polyethers: Synthesis,characterization, and properties

A series of s‐triazine‐based hyperbranched polyethers (HBPE) have been synthesized to obtain thermostability but flexible polymers by an interfacial polycondensation of different diols as A₂ and cyanuric chloride as B₃ monomers using A₂ + B₃ approach in the presence of a phase transfer catalyst. The polymerization reaction parameters are optimized, and the results indicate that the optimum conditions for the interfacial polycondensation are a 2:3 mole ratio of cyanuric chloride to diol using butanediol, benzyldimethylhexadecyl ammonium chloride as the catalyst, dichloromethane as the organic solvent, and a three‐step procedure with keeping the reaction mixture at different low temperatures for 2h/2h/5h. Other techniques such as high‐temperature solution, one‐step polycondensation, and transesterification were also carried out to synthesize the HBPE but proved to be not suitable due to large number of side reactions. The synthesized polymers were characterized by FTIR, ¹H NMR, and ¹³C NMR spectroscopy, hydroxyl number determination, solution viscosity measurements, and GPC analysis. The thermal behavior of the hyperbranched polymer was investigated by thermogravimetric analysis and differential scanning calorimetry. All the results were compared with those from an analogous linear polyether, obtained from 2‐methoxy‐4,6‐dichloro‐s‐triazine and butanediol by using the same polymerization technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3994–4004, 2010     

Stereochemistry of the free‐radical polymerization of zinc methacrylates coordinated with a bidentate ligand

The polymerization of zinc methacrylates coordinated with a bidentate ligand ( 1 – 4 ) was carried out in chloroform at 60°C. The polymerization of these monomers gave chloroform‐insoluble polymers. Stereoregularity of the polymers was estimated from ¹H NMR spectra of poly(methyl methacrylate)s (PMMAs) derived from the original polymers. Monomers 1 and 2 gave slightly different polymers compared with conventional ones obtained by polymerization of methacrylic acid, while 3 afforded higher amounts of isotactic polymers than 1 and 2 . Conversely, 4 gave a polymer of high syndiotacticity. Furthermore, the relationship between triad tacticity and monomer concentration in the feed was studied. Consequently, it was demonstrated that the structure of bidentate ligands coordinated with zinc ion influences the stereoregularity of the resulting polymers.     

Structure–property relationship of phenoxyimine ligands/metal chloride initiating systems for controlled cationic polymerizations of alkyl vinyl ethers

The catalyst structure–property relationships of the phenoxyimine complexes in controlled cationic polymerization of vinyl ethers were investigated based on the Hammett correlation. The correlation analyses of a series of experiments using the phenoxyimine ligands/TiCl₄ initiating systems indicated that the substituents on the N‐aryl phenoxyimine ligands affected the polymerization rate and stereoselectivity. Importantly, a linear correlation was observed between the Hammett substituent constants and the polymerization rates, which indicates that the Lewis acidity of the complex is affected by the electron‐withdrawing and ‐donating effects of the substituents. The tacticity of product polymers correlated to the Hammett substituent constants. Unlike the relationship with the polymerization rates, the σ^– values, which account for the enhanced resonance effects, were more appropriate for the relationship with the tacticity than the normal σ values. In contrast, the polymerization behavior using o‐substituted ligands exhibited a trend different from those using p‐ or m‐substituted ligands. The structural change, which was caused by the rotation of the C? N bonding, most likely triggered the acceleration effect in the case of the o‐substituents. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2021–2029     

Asymmetric selective polymerization of racemic methacrylates with the cyclohexylmagnesium bromide-(−)-sparteine system

Asymmetric selective (or stereoelective) polymerization of various racemic methacrylates with cyclohexylmagnesium bromide (c-HexMgBr)-(-)sparteine (1/1.2) catalyst was studied in toluene at ?78°C. The methacrylates of α-ethylbenzyl (EBMA), α-isopropylbenzyl (i-PBMA), α-tert-butylbenzyl (t-BBMA), sec-butyl (s-BuMA), 1-methylallyl (1-MAMA), 2,3-epoxypropyl (2,3-EPMA), 2-phenylpropyl (2-PPMA), and menthyl (MentMA) alcohols were used as racemic monomers. In the polymerization of EBMA and i-PBMA (S) enantiomers were consumed preferentially and the optical purity of initially polymerized i-PBMA was as high as 97%. Optically pure (R) monomers were recovered at about 60% conversion for i-PBMA and 80% for EBMA. In t-BBMA, however, the (R) monomer was consumed preferentially over the (S) isomer. In the polymerization of s-BuMA and 1-MAMA (S) monomers were consumed in excess and the optical purity of the polymers formed in the early stage was about 30%. In 2,3-EPMA and 2-PPMA, which have asymmetric centers at the β position from the ester oxygen, (R) antipodes were more reactive. MentMA did not polymerize at ?78°C. Enantiomer selectivity ratios r_S and r_R were determined in the polymerization of EBMA, i-PBMA, and 1-MAMA. All polymers except poly(t-BBMA) were highly isotactic, but the tacticity of poly(t-BBMA) could not be estimated. Circular dichroism spectra of optically active polymers of α-substituted benzyl esters were measured.