具有优良结构稳定性的Ni73P11B16非晶态合金超细微粒

具有优良结构稳定性的Ｎｉ_（７３）Ｐ_（１１）Ｂ_（１６）非晶态合金超细微粒范以宁，胡征，许昭怡，陈懿（南京大学化学系，南京，２１０００８）关键词非晶态，ＮｉＰＢ合金，超细微粒，结构稳定性非晶态合金催化剂以其优良的催化性能而引起人们的广泛关注［１］。在?..     

Synthesis of Core-Shell Particles of Polystyrene and Poly(methyl methacrylate) Using Emulsion Photopolymerization

Summary: Submicron core-shell particles of polystyrene (PS) and polystyrene-co-poly(methyl methacrylate) (PS-co-PMMA) coated with PMMA were obtained by emulsion photopolymerization. The seeds of PS or PS-co-PMMA were prepared by emulsion polymerization with or without emulsifier and a ratio of functional monomer and crosslinker (SVBS/EDGMA) in order to obtain different surfaces for the subsequent coating with PMMA. At each stage, the evolution of the average particle size were monitored by using photon correlation spectroscopy (DLS) and the final polymer particles was analyzed via transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The core-shell morphology was identified as the increase of the average particle size in the second stage by DLS technique and by the direct observation by TEM of the differentiation between PS core and PMMA shell, and by the presence of two glass transition temperatures (T_g) as a consequence of the existence of two partially miscible phases.     

Density functional embedded cluster study of Cu(4), Ag(4) and Au(4) species interacting with oxygen vacancies on the MgO(001) surface

Cu(4), Ag(4), and Au(4) species adsorbed on an MgO(001) surface that exhibits neutral (F(s)) and charged (F(s) (+)) oxygen vacancies have been studied using a density functional approach and advanced embedding models. The gas-phase rhombic-planar structure of the coinage metal tetramers is only moderately affected by adsorption. In the most stable surface configuration, the plane of the tetramers is oriented perpendicular to the MgO(001) surface; one metal atom is attached to an oxygen vacancy and another one is bound to a nearby surface oxygen anion. A very similar structural motif was recently found on defect-free MgO(001), where two O(2-) ions serve as adsorption sites. Following the trend of the interactions with the regular MgO(001) surface, Au(4) and Cu(4) bind substantially stronger to F(s) and F(s) (+) sites than Ag(4). This stronger adsorption interaction at oxygen vacancies, in particular at F(s), is partly due to a notable accumulation of electron density on the adsorbates. We also examined the propensity of small supported metal species to aggregate to adsorbed di-, tri- and tetramers. Furthermore, we demonstrated that core-level ionization potentials offer the possibility for detecting experimentally supported metal tetramers and characterizing them structurally with the help of calculated data.     

Solid State NMR Study of Polystyrene Nanolatex Particles(I) ~(13)C Spin-Lattice Relaxation Time

A wide range of physical methods has been used for studying the sintering behavior of bulk polystyrene, which has been the subject of AFM imaging, DSC measurement, Dilatometer meadurement, Fourier IR, and solid state NMR studies to investigate the physicochemical change and its relation to the electronic and magnetic performance. In recent years, more attention was paid to the size effect on annealing temperature for the latex particles with the diameter of less than 100 nm, which present…     

Preparation of poly(phenylsilsesquioxane) (PPSQ) particles with ladder structure and the thermal stability of PP/PPSQ composites

The poly(phenylsilsesquioxane) (PPSQ) particles were prepared with both basic and acidic catalyzed processes and the PP/PPSQ composites were prepared by melt blending method. Studies on PPSQ by Infrared (IR), X‐ray diffraction (XRD), ²⁹Si cross polarized (CP) nuclear magnetic resonance (NMR) spectroscopy showed that the structure of PPSQ was ladder structure. The results of scanning electron microscopy (SEM) confirmed that the prepared PPSQ particles were about 2 µm with narrow size distributions. The morphology and thermal stability of PP/PPSQ composites were characterized by SEM, XRD, and thermogravimetric analysis (TGA). The SEM result showed that the particles were well dispersed in the PP matrix and the XRD revealed that the addition of PPSQ influences the crystallinity and crystal orientation of PP. The thermogravimetric analysis results of the PP/PPSQ composites indicated that the incorporation of PPSQ can improve the thermal stability of PP. The Flynn–Wall–Ozawa method was employed to analyze the TGA data and the kinetic results showed that the apparent activation energy for PP/PPSQ composites was much higher than that of neat PP, suggesting that the PPSQ influences the mechanisms of pyrolysis of PP. Copyright © 2010 John Wiley & Sons, Ltd.     

4-(4-甲氧基苯亚甲基)-2-苯基-5(4H)-噁唑酮纳米带的可控制备及光学特性研究

选取大π共轭体系4-(4-甲氧基苯亚甲基)-2-苯基-5(4H)-噁唑酮作为研究对象,采用再沉淀法制备其纳米晶体,通过研究溶剂、温度、搅拌速度、搅拌时间等因素对所形成的纳米粒子的形貌尺寸的影响,成功制备出了形貌较单一的纳米棒和纳米带结构并进一步考察了它们的紫外吸收和发射光谱,结果表明随着纳米粒子尺寸的增加,其吸收光谱和荧光光谱均出现红移,荧光量子效率随着粒子尺寸的增大略有增大.     

Sorption of trace metals (Cu, Pb, Zn) by suspended lake particles in artificial (0.005 M NaNO3) and natural (Esthwaite Water) freshwaters

The sorption of Cu, Pb, and Zn onto natural lake particles, suspended in 0.005 M NaNO₃ solution and in a natural lake water (Esthwaite Water, Cumbria, UK), was studied as a function of pH and time in a series of laboratory experiments, under environmentally realistic conditions. The sorption of all three metals increased with increasing pH and reaction time (2 h and 7 days). In 0.005 M NaNO₃ solution, the well-defined sorption edges spanned 2–2.5 pH units for Cu and Pb, and ≈ 4 pH units for Zn. In the natural lake water, the Cu sorption edge was broader and both Cu and Zn were less strongly sorbed. The binding stability decreased in the order Pb>Cu>Zn. Competitive adsorption onto surface sites appeared to be the main factor determining the observed sorption behaviour. Application of a macroscopic metal exchange model to the 7 day NaNO₃ results enabled the surface site concentration to be estimated as 0.79 ± 0.07 mmol g⁻¹. The modelling exercise suggested that an observed shift in the sorption edge of Zn, in the presence of Pb and Cu, was due to competition for surface sites. The experimental data are in good general agreement with field observations of trace metal behaviour in Cumbrian lakes. The almost total sorption of Pb by lake particles throughout the in-situ pH range is compatible with previous field measurements including trace metal budgets and residence times. Dissolved Zn concentrations in the lake are lower than predicted by the sorption experiments, but the lower lake concentrations are consistent with the previously observed scavenging of Zn by planktonic algae. Both the decreased sorption of Cu in the experiments with natural lake water, compared to that in NaNO₃ solution, and the relatively small-scale removal of dissolved Cu by particles in the lake itself can partially be explained by humic complexation.     

铜(II)-铬(VI)复合均匀胶体粒子的制备

报导在尿素存在下通过均相沉淀法由硝酸铜和重铬酸铵制备复合均匀胶体粒子的结果．研究了一些实验参数对其组成、形态和粒子大小的影响．确定了胶体粒子的制备条件．结果观测到，由硝酸铜和重铬酸铵溶液形成了球形的多刺的粒子，它的组成为水含铅酸铜．     

Comparative Study on the Collapse Transition of Poly(N-isopropylacrylamide) Gels and Magnetic Nanoparticles Loaded Poly(N-isopropylacrylamide) Gels

A novel polymer gel exhibiting simultaneous temperature and magnetic field sensitivity has been prepared and studied. Poly(N-isopropylacrylamide) (PNIPA) and magnetic nanoparticles (magnetite, Fe₃O₄) loaded PNIPA gel beads with mm size and monolith gels with cm size were prepared. The dependence of swelling degree on the temperature has been studied. The effects of cross-linking density and the presence of magnetic nanoparticles on the equilibrium swelling degree as well as on the collapse transition have been investigated. Swelling kinetic measurements were also made. By comparing the equilibrium swelling properties of PNIPA and magnetite loaded PNIPA gels it was found that the built in magnetic nanoparticles do not modify the temperature sensitivity of these gels. Within the experimental accuracy the temperature of the collapse transition was not sensitive to the presence of magnetic particles. We have compared the swelling behaviour of mm size gel beads to the cm size monolith gels in order to study the influence of surface skin layer on the swelling equilibrium. It was established that the extent of surface skin formation was decreased by the presence of magnetic particles.     

Robust Poly(allylamine)‐graft‐poly(N‐isopropylacrylamide) Particles Prepared by Physical Crosslinking with Poly(styrene sulfonate)

Summary: Robust thermosensitive PAH‐g‐PNIPAAm/PSS particles were prepared by addition of a poly(allylamine)‐graft‐poly(N‐isopropylacrylamide) particle suspension into poly(styrene sulfonate) solution above the LCST of PAH‐g‐PNIPAAm. Scanning force microscopy revealed stable and well‐separated particles in water at room temperature. The zeta‐potential showed a negative surface charge of the particles. Their thermosensitive behavior was demonstrated by dynamic light scattering. The release of rhodamine 6G loaded particles could respond to the incubation temperature.

Fabrication of thermosensitive and robust particle by suspension of in situ formed PAH‐g‐PNIPAAm particle above the LCST in PSS solution.     

Estimation of Morphology Characteristics of Porous Poly(propylene) Particles from Degassing Measurements

The transport of reaction species in polyolefin particles affects both the polymerization and the degassing of the powder in the down‐stream processing. The morphology of particles – that is, the distribution of polymer and pore phases – predetermines their degassing behavior. We utilize gravimetric measurements to obtain the dynamics of degassing and to determine morphology characteristics of porous poly(propylene) particles. We found that Fick's diffusion model is not generally capable of fitting the shape of degassing curves of porous particles. Therefore we propose a particle model including two sizes of compact polymer granules and demonstrate that the degassing can be described by this model and that the model is capable of estimating fractions of large and small compact zones and the size of large compact zones.

     

Supramolecular Crystallization of Monodispersed Silica Spherical Particles (MSSP) in Concentrated Suspensions

The supramolecular crystallization of MSSP concentrated suspensions in alcohol and ethyl ether with various ammonia concentrations is found to occur as a phase transition, with appearence of a pre-transitional state. The temperature dependence of the time, it takes for this state to be established, evidences for the presence of processes of nucleation and activation character.     

Morphology control of soap-free seeded P(St-EA-AA) latex particles

Soap-free poly(styrene-ethyl acrylate-acrylic acid) latex particles with narrow size distribution and with surface carboxyl groups were synthesized by semicontinuous emulsion polymerization, and the particles with homogeneous multihollow structure were obtained after alkali posttreatment. Effects of treatment conditions and crosslinking agents on particle morphology were investigated. Results showed that the multihollow structure can be formed inside the uncrosslinked particles only when the treatment temperature exceeded 50 °C, the pH was higher than 10.0, the amount of 2-butanone was more than 3.0 ml and the treatment time was longer than 30 min. Furthermore, the volume expansion of the particles increased with the temperature increased to 90 °C, the pH to 12.5 or the amount of 2-butanone to 7.0 ml, and this value increased first and then decreased with the treatment time prolonged. Fine pores can be generated in the shell of particles crosslinked by 0.2 g of ethyl glycol dimethylacrylate (EGDMA), while no hollow structure formed inside particles when 0.4 g of EGDMA or 0.2 g of divinyl benzene was used.     

Preparation and stability of copper particles formed using the template of hyperbranched poly(amine-ester)

The sixth-generation hydroxyl-ended hyperbranched poly(amine-ester) (G6-OH) was investigated as template in formation and stabilization of copper nanoparticles. Ultra-violet spectra and transmission electron microscope were adopted to characterize absorption properties of G6-OH(Cu²⁺)_n complex and the morphology of the formed particles (G6-OH(Cu)_n), respectively. The template and stabilization functions of G6-OH were compared with di-block copolymer micelles and dendrimers having similar structure. It was found that the hyperbranched polymers could act as the templates for the preparation of copper particles. The size of the formed copper particles increased with Cu²⁺/Gn-OH molar ratio. Besides, the oxygen influenced the chemistry stability of copper particles greatly.     

Multistep manipulations of poly(methyl‐methacrylate) submicron particles using dielectrophoresis

A microfluidic chip for multistep manipulations of PMMA submicron particles (PMMA‐SMPs) based on dielectrophoresis (DEP) has been developed that includes four main functions of focusing, guiding, trapping, and releasing the SMPs. The structure of the DEP chip consists of a top electrode made of indium tin oxide, a flow chamber formed by optically clear adhesive tape and bottom electrodes with different patterns for different purposes. The bottom electrodes can be divided into three parts: a fish‐bone‐type electrode array that provides the positive DEP force for focusing the suspended nanoparticles (NPs) near the inlet in the flow chamber; the second is for switching and guiding the focused NPs along the electrode surface to the target area, like a flow passing along a virtual channel; and a trapping electrode in the downstream for trapping and releasing the guided NPs. According to the simulation and experimental results, NPs can be aligned along the electrode of the focusing electrode and guided toward the target electrode by means of a positive DEP force between the top and bottom electrodes, with the effects of Brownian motion and Stokes force. In order to demonstrate the sequence of DEP manipulations, a PMMA‐NP suspension is introduced to the DEP chip; the size of the PMMA‐SMPs is about 300 nm. Furthermore, a LabVIEW program developed for sequence control of the AC signals for the multistep manipulations. Consequently, the DEP chip provides an excellent platform technology for the multistep manipulation of SMPs.     

嵌入(或载在)Y型分子筛上Pd粒子的XPS研究

1前言早在70年代末80年代初，就有文献报道在载体上的金属Pd的某些性能，并注意到将其作为催化剂在甲醇合成上有很高的活性和选择性[1~3]，然而并没有继续进行系统研究．80年代末，Sachtler等人开始在这一领域进行更广泛、更细致、更深入的研究[4~8]．他们不仅研究了载在分子筛上的Pd，也研究了Pd与其他过渡金属所形成的合金的性能．它们的催化性质研究包括对CO加氢、新戊烷和氢解和异构化以及甲基环戊烷的开环和扩环反应[4~9]．对Pd的其他性质的研究，还包括采用TPR、TPD、TPO和TPMS等技术，分析了Pd或其合金等金属原子在NaY分子…     

Y(OH)CO3在AgI上的覆盖及中空粒子的制备

用银配合物制备均匀球形AgI纳米粒子,粒径20～100 nm范围内可自由调控.用AgI作为内置核,在尿素存在下,将Y(NO3)3进行升温水解,在预置粒子上包覆Y(OH)CO3形成复合粒子,并符合表面膜机理.结合X射线、电镜照片,考察了Y(NO3)3、尿素、银配合物、内置核的浓度,反应时间,水解温度,表面电荷对反应体系的影响.并加入配合剂Na2S2O3,运用生成稳定配合物的方法溶解内置核,最终得到Y(OH)CO3中空粒子.     

Interactions of Pb(II) with particles of a polluted river

Pb(II) interactions with the surface of suspended matter from a polluted river was studied using differential pulse anodic stripping voltammetry (DPASV) technique. Three sampling sites were selected and studies have been done with samples collected in different times of the year (winter, autumn and summer). The values have been compared with those obtained in spring in the same conditions [Sci. Total Environ. 151 (1994) 101].Particles were separated by centrifugation and suspensions of the freeze-dried particles were titrated with Pb(II), being measured the labile metal fraction by DPASV. For comparison, suspensions of river water without any separation have also been titrated.Results show that surface metal complexes are inert, within the time scale of the analytical technique and desorbed organics from surfaces, form labile Pb(II) complexes in solution. For each sample it was determined the capacity for Pb complexation of particles and desorbed organics and the differential function has been estimated. Despite the heterogeneity of ligands, the systems interpreted in a discontinuous way, present one or two kinds of dominant ligands with Pb affinity.     

A New Kind of Void Soap-free P（MMA-EA-MAA） Latex Particles

Soap-flee P(MMA-EA-MAA) particles with narrow size distribution were synthesized by seeded emulsion polymerization of methyl methacrylate (MMA), ethyl acrylate (EA) and methacrylic acid (MAA), and large voids inside the particles were generated by alkali posttreatment in the presence of 2-butanone. Results indicated that the size of void and theparticle volume were related with the amount of 2-butanone. The generation mechanism of voids was proposed.