Selective hydrogenation of nitrobenzene top-Aminophenol by the polymer-supported palladium-based mono- and bimetallic catalyst

In acidic reaction medium, polymer-supported monometallic palladium catalyst, PVP-PdCl₂ [(PVP=poly(N-vinyl-pyrrolidone)], is used to catalyze the hydrogenation of nitrobenzene top-aminophenol and aniline. The addition of a second transition metal compound or a very small amount of 2-mercaptopyrimidine gives rise to an increase in the selectivity forp-aminophenol.     

XAFS characterization of supported PdCl2?CuCl2 catalysts for CO oxidation

A heterogenized Wacker catalyst system in which pores of a high surface area alumina were filled with an aqueous solution of PdCl₂–CuCl₂ was active for the oxidation of CO near room temperature. The structure of thecatalyst was studied by XRD and XAFS. The active phase of Pd was a molecular Pd species whose structure was similar to PdCl₂, probably modified by a carbonyl ligand. The active phase of copper was found to be solid Cu₂Cl(OH)₃ particles. The presence of Cu was essential to keep the Pd in the Pd(II) state during the reaction.     

SO42-/SnO2-Fe2O3固体酸催化下的环酮Baeyer-Villiger氧化反应及缩合反应

采用共沉淀的方法制备了不同Fe 掺杂量的SO₄^2-/SnO₂-Fe₂O₃固体超强酸催化剂. 利用傅里叶变换红外(FTIR)光谱, 粉末X射线衍射(XRD), N₂吸附-脱附实验(BET), 热重(TG)分析和扫描电镜(SEM)等方法对样品进行了表征. 考察了所得催化剂对4-叔丁基环己酮与乙二醇缩合反应的催化性能. 实验结果表明, 与未经过掺杂改性的SO₄^2-/SnO₂固体酸催化剂相比, 改性后催化剂的催化性能得到了改善. 研究了以Fe/Sn 摩尔比为0.5的SO₄^2-/SnO₂-Fe₂O₃固体酸为催化剂, 部分醛酮类化合物与乙二醇及1,2-丙二醇的缩合反应. 考察了反应时间、催化剂用量等因素对反应的影响. 同时, 将所得催化剂应用于环酮Baeyer-Villiger 氧化反应中, 催化剂表现出良好的催化活性, 且催化剂具有一定的循环使用性.     

Suzuki cross-coupling in aqueous media catalyzed by a 1,1-N-substituted ferrocenediyl Pd(II) complex

Reaction of PdCl₂(MeCN)₂ with Fe[η-C₅H₄NC(H)Ph-N]₂ (1) at MeOH at r.t. gives air-stable PdCl₂Fe[η-C₅H₄NC(H)Ph-N]₂ (2; yield 84%). X-ray single-crystal diffraction analyses show that 2 is a Pd(II) square planar complex with N,N^′ chelation of the ferrocenediyl ligand, without Fe-Pd bond. It effectively catalyzes Suzuki cross-coupling reactions of aryl iodides and bromides with aryl boronic acids in aqueous media under non-homogeneous conditions in which the products can be easily isolated. The reaction conditions including choice of base, catalytic load and catalyst recoverability have been investigated and reported.     

Cleavage of alkoxycarbonyl protecting groups from carbamates by t-BuNH2

An efficient, simple protocol for the selective cleavage of a variety of N-alkoxycarbonyl protecting groups by t-BuNH₂/MeOH is described. The scope of the procedure was explored for a series of indole, aniline and pyrrolidine carbamate derivatives containing other potentially reactive functional groups affording a clean cleavage of the carbamate group.     

Co-catalysis by transition metal ions in the hydrogen ion catalysed oxidation of iodide ions. A kinetic study

The reaction between KI and [Fe(CN)₆]^3– ion, catalysed by hydrogen ions, was found to be catalysed further by PdCl₂. Separate reactions under similar conditions, studied in the absence as well as in the presence of PdCl₂ catalyst, were found to follow first order kinetics w.r. to [Fe(CN)₆]^3– and [H⁺], while the order was two w.r. to [I^–]. [Fe(CN)₆]^4– ions were found to have a negative effect while changes in ionic strength of the medium do not effect the reaction velocity. Reaction in the presence of PdCl₂ showed direct proportionality w.r. to [PdCl₂]. The rate and extent of the reaction, which takes place even at zero [PdCl₂] in the co-catalysed reaction, was calculated and was found to be in accordance with the rate values of the separately studied reaction at similar concentrations without adding PdCl₂.     

KI与无机铵盐催化CO2与环氧丙烷合成碳酸丙烯酯

以无毒、合成简单、廉价的无机铵盐(氨基甲酸铵、碳酸氢铵、碳酸铵等)为助催化剂, 研究其对卤化钾(KCl、KBr、KI)催化CO₂与环氧丙烷合成碳酸丙烯酯(PC)的影响. 结果表明, 卤化钾与无机铵盐显示出很好的协同催化效应. 其中以氨基甲酸铵为助催化剂, KI为主催化剂时, 催化合成PC的效果最好. 同时考察了催化剂用量、反应温度、CO₂初始压力、PC的预加入量、反应时间等因素对反应的影响. 在优化条件下, PC收率大于99%.     

SnCl2/PdCl2-mediated aldehyde allylation in fully aqueous media

Catalyzed by PdCl₂, SnCl₂ can efficiently mediate the allylation of various aldehydes with allyl chloride or bromide, but not with allyl alcohol, in fully aqueous media. The yield of the reaction is very high (90-100%), and the reaction is operationally simple, environmental benign and easy to scale up.     

Preparation, characterization and catalyst application of ternary interpenetrating networks of poly 4-methyl vinyl pyridinium hydroxide-SiO2-Al2O3

In this work, Al₂O₃ was mixed with SiO₂ and poly 4-vinylpyridine by the sol-gel method in order to make a composite which is used as a heterogeneous basic catalyst for Knoevenagel condensation reaction. The physical and chemical properties of the composite catalyst were investigated by XRD, FT-IR, TG, BET and SEM techniques. The catalytic performance of each material was determined for the Knoevenagel condensation reaction between carbonyl compound and malononitrile. The reactions were performed in solvent-free conditions and the product was obtained in high yield and purity after a simple work-up. The effects of the amount of catalyst, amount of monomer for the synthesis of composite and recyclability of the heterogeneous composite were investigated. The composite catalyst used for this synthetically useful transformation showed considerable level of reusability besides very good activity.     

Chemoselective anti-Markovnikov hydroamination of α,β-ethylenic compounds with amines using montmorillonite clay

The catalytic activity of montmorillonite clays as a catalyst for the hydroamination of α,β-ethylenic compounds with amines was tested. Aniline and substituted anilines reacted with α,β-ethylenic compounds in the presence of catalytic amount of commercially available clay to afford exclusively anti-Markovnikov adduct in excellent yields. Aniline reacted with ethyl acrylate to yield only anti-Markovnikov adduct N-[2-(ethoxycarbonyl)ethyl]aniline (mono-addition product). No Markovnikov adduct (N-[1-(ethoxycarbonyl)ethyl]aniline and double addition product N,N-bis[2-(ethoxycarbonyl)ethyl]aniline were formed under selected reaction conditions. For a better exploitation of the catalytic activity in terms of increased activity and improved selectivity for the mono-addition product, the reaction parameters were optimized in terms of temperature, solvent, reactant mole ratio. Under optimized reaction conditions, montmorillonite clay K-10 showed a superior catalytic performance in the hydroamination of ethyl acrylate with aniline with a conversion of aniline to mono-addition product (almost 100% chemoselectivity) with a high rate constant 0.3414 min⁻¹ compared to the reported protocols. The dependence of conversion of aniline over different types of montmorillonite clays (K-10, K-20, K-30, Al-Pillared clay and untreated clay) has also been discussed. The activities of clay for the hydroamination of different aromatic and aliphatic amines have also been investigated. Under harsh reaction conditions (increased temperature and long reaction time) small amounts of di-addition products were observed. The kinetics data has been interpreted using the initial rate approach model.     

Thermoanalytical and spectroscopic studies of the synthesis of suppokted palladium catalyst in A H2/PdCl2/SiO2 parent system

A 5 wt% Pd/SiO₂ catalyst was synthesized by heating PdCl₂-impregnated SiO₂ in H₂ at 300°C for 2 h. It was found that the metal particle dispersion is improved when the reduction step is preceded by calcination at 300°C for 2h. Thermogravimetry of the impregnated support in air, N₂ and H₂ atmospheres was used to monitor the interactions occurring during the various preparative steps (i.e. drying, calcination and reduction) of the catalyst. The solid prduct of each preparative step was characterized by X-ray diffractometry and UV/Vis diffuse reflectance spectroscopy. The results indicate that following the drying step (at 110°C in air) the palladium occurs in two detectable forms: PdCl₂ particles and Si?O?Pdⁿ⁺ surface species. The calcination appears to transform the PdCl₂ particles into the latter surface species. The H₂-reduction eventually converts the surface species into finely-dispersed Pd° metal particles (average size=8–14 nm). No other reduction products, such as Pd_ySi_x, were detected.     

Preparation of Pd/C catalysts via deposition of palladium hydroxide onto Sibunit carbon and their application to partial hydrogenation of rapeseed oil

Pd/Sibunit catalysts were prepared by deposition of palladium hydroxide onto the support surface in an alkaline medium. It was found that the palladium distribution throughout the catalyst grain, and the dispersion of Pd particles depend on (i) the order of the addition of H₂PdCl₄ and Na₂CO₃ to carbon suspension, (ii) Na₂CO₃ to H₂PdCl₄ ratio, and (iii) aging time of the mixture H₂PdCl₄ + Na₂CO₃ before its addition to the carbon. The catalysts were tested in the hydrogenation of cyclohexene and rapeseed oil under static conditions. The yield of trans-isomers as products of partial hydrogenation of rapeseed oil was found to decrease with decreasing the Pd particle size in the catalysts, as well as with increasing the Pd concentration on the periphery of the support grains.     

Al含量对Pt-SO2-4 /ZrO2-Al2O3固体超强酸催化

通过向SO^2-₄ /ZrO₂催化剂中同时引入适量的Pt和Al₂O₃, 制备出了具有较高催化性能和稳定性的Pt-SO^2-₄ /ZrO₂-Al₂O₃型固体超强酸催化剂. 以正戊烷异构化反应为探针, 考察了Al含量对催化剂性能的影响; 并采用X射线衍射(XRD)、比表面积测定(BET)、红外(IR)光谱、程序升温还原(TPR)、热重-差热分析(TG-DTA)和氨-程序升温脱附(NH₃-TPD)手段对催化剂进行了表征. 结果表明, Al能够提高ZrO₂的晶化温度, 抑制硫的分解, 增加催化剂的比表面积, 增强硫氧键的结合, 提高催化剂的还原性能, 增加催化剂的酸强度和酸总量. 当Al₂O₃含量(质量分数, w)为5.0%时, Pt-SO^2-₄ /ZrO₂-Al₂O₃固体超强酸催化剂的催化活性最好, 在100 h内异戊烷收率可稳定在52.0%以上, 选择性在98.2%以上.     

K2PdCl4 catalyzed efficient multicomponent synthesis of α-aminonitriles in aqueous media

An efficient, mild and environmentally friendly method has been developed for the Strecker reaction to synthesize α-aminonitriles in the presence of K₂PdCl₄ as a catalyst. The three-component one-pot condensation of an aldehyde, amine and trimethylsilyl cyanide proceeded smoothly in water to afford the corresponding product in high yield with short reaction times.     

Highly selective synthesis of 3-methylindole from glycerol and aniline over Cu/NaY modified by K2O

The vapor-phase synthesis of 3-methylindole from glycerol and aniline over Cu/NaY modified by K2O was investigated. The catalysts were characterized by X-ray diffraction （XRD） and the temperature- programmed desorption of ammonia （NH3-TPD）. The effect of the reaction temperature on the activity and selectivity of Cu]NaY-K2O catalyst was also investigated. The results indicated that the addition of K2O to Cu/NaY increased the selectivity of the catalyst remarkably because the amount of middle-strong acid sites decreased clearly. The decrease of the reaction temperature was beneficial for the increase of 3- methylindole selectivity. Over Cu/NaY-K2O, the selectivity of 3-methylindole reached 75% and the yield of the target product was up to 47% at 220 ℃. A probable catalytic mechanism for the synthesis of 3- methylindole from glycerol and aniline was proposed.     

Ring opening of epoxides with alcohols using Fe(Cp)2BF4 as catalyst

Fe(Cp)₂BF₄ is an efficient catalyst for the alcoholysis of aromatic, aliphatic, and cyclic epoxides giving excellent yields of the corresponding β-alkoxy alcohols under ambient conditions. The methanolysis of styrene oxide using Fe(Cp)₂BF₄ as a catalyst (5 mol %) gave excellent yield of 2-methoxy-2-phenylethanol with complete regio-selectivity. The ring opening of cyclic epoxides gave 77–97% yields of trans-β-methoxy alcohols, in 0.5–6 h. The use of 1,2-epoxyhexane and 1,2-epoxydodecane as substrates gave both regioisomers in excellent yields. The first order rate of reaction with respect to catalyst was observed for the kinetics of ring opening of 1,2-epoxyhexane with methanol.     

Phenoxide-assisted P-C bond cleavage in PdCl2(PPh3)2 under very mild conditions

PdCl₂(PPh₃)₂ reacted with NaOAr (Ar = Ph, p-tolyl) at 0 °C to afford PdCl(Ph)(PPh₃)₂, instead of PdCl(OAr)(PPh₃)₂, in 12-16% isolated yields based on Pd. The structure was confirmed by NMR and X-ray crystallography. GC-MS analysis of the reaction solution revealed that OPPh₂(OAr), OPPh(OAr)₂, and OP(OAr)₃ are formed, while NMR studies indicated that PdCl(Ph)(PPh₃)₂ is produced when PdCl(OAr)(PPh₃)₂ decomposes. The reaction of PdCl₂(PPh₃)₂ with Bu₃Sn(OC₆H₄-p-OMe) also gave PdCl(Ph)(PPh₃)₂ in 8% isolated yield. These results suggest that PdCl(OAr)(PPh₃)₂ is highly labile and the aryloxy ligand exchanges with the phenyl groups in triphenylphosphine even under very mild conditions.     

铁、钴或镍助剂促进的 Ag/SiO2 催化剂上气相催化合成 3-甲基吲哚

 将铁、钴或镍促进的 Ag/SiO2 催化剂用于苯胺和 1,2-丙二醇气相催化合成 3-甲基吲哚的反应中, 并采用 X 射线衍射、H2-程序升温还原和热重分析等技术对催化剂进行了表征. 结果表明, 铁或镍助剂的加入有助于提高 Ag/SiO2 催化剂的选择性. 其中, 铁的加入能增强活性组分银与载体间相互作用, 大大促进了银在载体表面上的分散, 使催化剂的初活性显著提高. 而钴或镍的加入虽然能略微减少反应过程中 Ag/SiO2 催化剂表面的积炭, 但加剧了银在反应过程中的烧结, 导致催化剂稳定性下降.     

Environment-friendly synthesis of N-phenylpiperidine from aniline and 1,5-pentanediol over γ-Al2O3 catalyst

An efficient environment-friendly synthesis of N-phenylpiperidine was developed from aniline and 1,5-pentanediol over γ-Al2O3 catalyst under atmospheric pressure. The conversion of 1,5-pentanediol reached 97% and the selectivity for N-phenylpiperidine attained 94%. The structure of the catalyst was characterized by NH3-TPD and BET. The influences of calcination temperature of the catalyst and reaction temperature on activity and selectivity of the catalyst were investigated.     

Co或Ni促进的Cu/SiO2-Al2O3催化剂上丙三醇和苯胺气相合成3-甲基吲哚

对丙三醇和苯胺在Co或Ni促进的Cu/SiO2-Al2O3催化剂上气相合成3-甲基吲哚进行了研究.采用N2吸附、氢气程序升温还原(H2-TPR)、电感耦合等离子体(ICP)发射光谱、X射线衍射(XRD)、透射电子显微镜(TEM)、氨程序升温脱附(NH3-TPD)及热重(TG)分析等技术对催化剂进行了表征.结果表明,向Cu/SiO2-Al2O3催化剂加入钴或镍助剂改善了催化剂的催化性能,钴比镍更加有效.在催化剂Cu-Co/SiO2-Al2O3和Cu-Ni/SiO2-Al2O3上,反应第3 h,3-甲基吲哚收率分别达到47%和45%,而且催化剂经过6次再生收率仍能达到44%和42%.各种表征表明,向Cu/SiO2-Al2O3催化剂加入钴或镍助剂能增强铜和载体之间的相互作用,其结果不仅促进了铜粒子在载体表面的分散度,而且有效减少了反应过程中铜组分的流失.另外,加入钴或镍助剂还能减少催化剂的中强酸中心数,从而提高3-甲基吲哚的选择性,并且抑制积炭的形成.此外,钴助剂还能增加催化剂的弱酸中心数,促进3-甲基吲哚的生成.提出了金属铜与弱酸中心共同促进3-甲基吲哚合成的催化反应机理.