β‐AgVO3 Nanorods as Peroxidase Mimetic for Colorimetric Determination of Glucose

β‐AgVO₃ nanorods have been demonstrated to exhibit intrinsic peroxidase‐like activity. The oxidation of glucose can be catalyzed by glucose oxidase (GOx ) to generate H₂O₂ in the presence of O₂ . The β‐AgVO₃ nanorods can catalytically oxidize peroxidase substrates including o‐phenylenediamine (OPD ), 3,3′,5,5′‐tetramethylbenzidine (TMB ), and diammonium 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonate) (ABTS ) by H₂O₂ to produce typical color reactions: OPD from colorless to orange, TMB from colorless to blue, and ABTS from colorless to green. The catalyzed reaction by the β‐AgVO₃ nanorods was found to follow the characteristic Michaelis–Menten kinetics. Compared with horseradish peroxidase and AgVO₃ nanobelts, β‐AgVO₃ nanorods showed a higher affinity for TMB with a lower Michaelis–Menten constant (K _m) value (0.04118 mM ) at the optimal condition. Taking advantage of their high catalytic activity, the as‐synthesized β‐AgVO₃ nanorods were utilized to develop a colorimetric sensor for the determination of glucose. The linear range for glucose was 1.25–60 μM with the lower detection limit of 0.5 μM . The simple and sensitive GOx ‐β–AgVO₃ nanorods–TMB sensing system shows great promise for applications in the pharmaceutical, clinical, and biosensor detection of glucose.     

Real‐time Selective Detection of Hydrogen Peroxide Based on a Tantalum Deposited Pencil Lead Electrode for Evaluation of Enzyme Activities

In this study, we have carried out electrodeposition of tantalum (Ta) nanostructures on pencil lead electrode in non‐aqueous media at room temperature by applying a constant potential. The deposited Ta on pencil lead was examined for the catalytic effect regarding hydrogen peroxide (H₂O₂) reduction with voltammetry and amperometry. Ta/pencil lead electrode exhibited amperometric sensitivity of 0.317 μA mM⁻¹ cm⁻² and fast response time of 0.75 s, where selective detection of H₂O₂ was fulfilled without interruption from common electroactive biomaterials such as O₂, uric acid, ascorbic acid, dopamine, acetamidophenol, and glucose. For practical applications, the dynamic concentration changes of H₂O₂ during catalase and glucose oxidase‐involved reactions, either eliminating or producing H₂O₂, were successfully traced in real time with as‐prepared electrode. From the kinetics study for catalase and glucose oxidase, we evaluated Michaelis constants (K _m^app) as 7.8 mM for catalase and 37 mM for glucose oxidase, respectively.     

An Intracellular H2O2‐Responsive AIEgen for the Peroxidase‐Mediated Selective Imaging and Inhibition of Inflammatory Cells

Inflammatory cells have gained widespread attention because inflammatory diseases increase the risk for many types of cancer. Therefore, it is urgent and important to implement detection and treatment methods for inflammatory cells. Herein, we constructed a theranostic probe with aggregation‐induced emission (AIE) characteristics, in which tetraphenylethene (TPE) was modified with two tyrosine (Tyr) moieties. Owing to the H₂O₂‐dependent, enzyme‐catalyzed dityrosine formation, Tyr‐containing TPE ( TT ) molecules crosslink through dityrosine linkages to induce the formation of hydrophobic aggregates, activating the AIE process in inflammatory cells that contain H₂O₂ and overexpress myeloperoxidase. The emission turn‐on resulting from the crosslinking of TT molecules could be used to distinguish between inflammatory and normal cells. Moreover, the massive TT aggregates induced mitochondria damage and cell apoptosis. This study demonstrates that the H₂O₂‐responsive peroxidase‐activated AIEgen holds great promise for inflammatory‐cell selective imaging and inhibition.     

Reaction‐Based and Single Fluorescent Emitter Decorated Ratiometric Nanoprobe to Detect Hydrogen Peroxide

A novel reaction‐based cross‐linked polymeric nanoprobe with a self‐calibrating ratiometric fluorescence readout to selectively detect H₂O₂ is reported. The polymeric nanoprobe is fabricated by using hydrophobic H₂O₂‐reactive boronic ester groups, crosslinker units, and environmentally sensitive 3‐hydroxyflavone fluorophores through a miniemulsion polymerization. On treatment with H₂O₂, the boronic esters in the polymer are cleaved to form hydrophilic alcohols and subsequently lead to a hydrophobic–hydrophilic transition. Covalently linked 3‐hydroxyflavones manifest the change in polarity as a ratiometric transition from green to blue, accompanied by a 500‐fold increase in volume. Furthermore, this nanoprobe has been used for ratiometric sensing of glucose by monitoring the H₂O₂ generated during the oxidation of glucose by glucose oxidase, and thus successfully distinguished between normal and pathological levels of glucose.     

Amperometric Flow‐Biosensor for Cyanide Based on an Inhibitory Effect upon Bioelectrocatalytic Reduction of Oxygen by Peroxidase‐Modified Carbon‐Felt

A novel, simple and relative highly sensitive amperometric flow biosensor for cyanide was developed by using horseradish peroxidase (HRP)‐adsorbed carbon‐felt (CF), based on an inhibitory effect on the HRP‐catalyzed O₂ reduction. The HRP‐CF showed a sufficient bioelecrocatalytic activity for O₂ reduction in the potential region from 0 to ?0.5 V at pH 5.0, due to a direct electron transfer‐based O₂ reduction process via ferrous‐HRP and compound III. This HRP‐catalyzed O₂ reduction was reversibly inhibited by cyanide, which enabled to fabricate a novel and simple reagentless (i.e., no requirement of the ordinary substrate, H₂O₂, and the electron transfer mediators) flow‐biosensor for cyanide. When air‐saturated 0.1 M phosphate buffer (pH 5.0) was used as a carrier under the applied potential of ?0.2 V vs. Ag/AgCl, the steady‐state base‐current due to the HRP‐catalyzed O₂ reduction was reversibly inhibited by the cyanide injection (200 µL), resulting in peak‐shape current responses. The magnitude of the inhibition peak currents linearly increased with increasing concentrations of cyanide up to 1 µM, and the detection limit was found to be 0.04 µM (S/N=2). The apparent inhibition constant K_i′ was estimated to be 0.87 µM.     

Determined GA by FI‐CE in Luminol‐H2O2 System

It was found that the chemiluminescence arising from the reaction of luminol with H₂O₂ involving Co(II)‐catalyzed in alkaline solution could be strongly inhibited by gibberellic acid. Based on this observation, a new flow injection chemiluminescence method is proposed for the determination of gibberellic acid. The detection limits of the method are 0.09 ng mL^?1 gibberellic acid. The method was successfully applied to the determination of gibberellic acid in bacteria‐free culture liquid.     

Methyl 2‐methyl‐6‐methyl­thio‐1,3‐dioxo‐4‐[(2,3,4,6‐tetra‐O‐acetyl‐β‐d‐gluco­pyran­osyl)­amino]‐2,3‐di­hydro‐1H‐pyrrolo­[3,4‐c]­pyridine‐7‐carboxyl­ate

The title compound, C₂₅H₂₉N₃O₁₃S, has peripheral acetyl and carbo­methoxy groups which show disorder. The absolute structure, although known from the starting materials, was confirmed by the analysis. There are no intermolecular hydrogen bonds. This structure is of importance because it elucidates the pathway for hetero‐Diels–Alder reactions between di­methyl acetyl­enedi­carboxyl­ate and 6‐amino­pyridin‐4(3H)‐one derivatives catalyzed by tri­fluoro­acetic acid.     

Poly(cytosine)‐templated Silver Nanoclusters as Fluorescent Biosensor for Highly Sensitive Detection of Uric Acid

Uric acid (UA) is an important biomarker in urine and serum samples for early diagnosis. This study re‐ ports a fluorescent biosensor based on Poly(cytosine)‐templated silver nanoclusters (C‐Ag NCs) and uricase for the highly sensitive and fast detection of UA. The strong fluorescence of the C‐Ag NCs prepared from poly (cytosine) nucleotides templates could be sensitively quenched by trace amount of H₂O₂, which produced from oxidation reaction of UA catalyzed by uricase. This biosensor exhibits two linear ranges as 50 nM～50 μM and 50 μM～400 μM, with a detection limit of 50 nM. The sensitivity of the biosensor is considerably improved compared with the methods reported in the literature. Furthermore, the detection ability of uric acid in serum samples is confirmed and this C‐Ag NCs‐based uric acid biosensor shows good promise of practical application.     

Synthesis and Applications of Silyl 2‐Methylprop‐2‐ene‐1‐sulfinates in Preparative Silylation and GC‐Derivatization Reactions of Polyols and Carbohydrates

Trimethylsilyl, triethylsilyl, tert‐butyldimethylsilyl, and triisopropylsilyl 2‐methylprop‐2‐ene‐1‐sulfinates were prepared through (CuOTf)₂?C₆H₆‐catalyzed sila‐ene reactions of the corresponding methallylsilanes with SO₂ at 50 °C. Sterically hindered, epimerizable, and base‐sensitive alcohols gave the corresponding silyl ethers in high yields and purities at room temperature and under neutral conditions. As the byproducts of the silylation reaction (SO₂+isobutylene) are volatile, the workup was simplified to solvent evaporation. The developed method can be employed for the chemo‐ and regioselective semiprotection of polyols and glycosides and for the silylation of unstable aldols. The high reactivity of the developed reagents is shown by the synthesis of sterically hindered per‐O‐tert‐butyldimethylsilyl‐α‐d ‐glucopyranose, the X‐ray crystallographic analysis of which is the first for a per‐O‐silylated hexopyranose. The per‐O‐silylation of polyols, hydroxy carboxylic acids, and carbohydrates with trimethylsilyl 2‐methylprop‐2‐ene‐1‐sulfinate was coupled with the GC analysis of nonvolatile polyhydroxy compounds both qualitatively and quantitatively.     

One‐dimensional hydrogen‐bonded structures in the 1:1 proton‐transfer compounds of 4,5‐dichlorophthalic acid with 8‐hydroxyquinoline, 8‐aminoquinoline and quinoline‐2‐carboxylic acid (quinaldic acid)

The structures of the 1:1 proton‐transfer compounds of 4,5‐dichlorophthalic acid with 8‐hydroxyquinoline, 8‐aminoquinoline and quinoline‐2‐carboxylic acid (quinaldic acid), namely anhydrous 8‐hydroxyquinolinium 2‐carboxy‐4,5‐dichlorobenzoate, C₉H₈NO⁺·C₈H₃Cl₂O₄⁻, (I), 8‐aminoquinolinium 2‐carboxy‐4,5‐dichlorobenzoate, C₉H₉N₂⁺·C₈H₃Cl₂O₄⁻, (II), and the adduct hydrate 2‐carboxyquinolinium 2‐carboxy‐4,5‐dichlorobenzoate quinolinium‐2‐carboxylate monohydrate, C₁₀H₈NO₂⁺·C₈H₃Cl₂O₄⁻·C₁₀H₇NO₂·H₂O, (III), have been determined at 130 K. Compounds (I) and (II) are isomorphous and all three compounds have one‐dimensional hydrogen‐bonded chain structures, formed in (I) through O—H...O_carboxyl extensions and in (II) through N⁺—H...O_carboxyl extensions of cation–anion pairs. In (III), a hydrogen‐bonded cyclic R₂²(10) pseudo‐dimer unit comprising a protonated quinaldic acid cation and a zwitterionic quinaldic acid adduct molecule is found and is propagated through carboxylic acid O—H...O_carboxyl and water O—H...O_carboxyl interactions. In both (I) and (II), there are also cation–anion aromatic ring π–π associations. This work further illustrates the utility of both hydrogen phthalate anions and interactive‐group‐substituted quinoline cations in the formation of low‐dimensional hydrogen‐bonded structures.     

Glucose‐Responsive Sequential Generation of Hydrogen Peroxide and Nitric Oxide for Synergistic Cancer Starving‐Like/Gas Therapy

Glucose is a key energy supplier and nutrient for tumor growth. Herein, inspired by the glucose oxidase (GOx)‐assisted conversion of glucose into gluconic acid and toxic H₂O₂, a novel treatment paradigm of starving‐like therapy is developed for significant tumor‐killing effects, more effective than conventional starving therapy by only cutting off the energy supply. Furthermore, the generated acidic H₂O₂ can oxidize l ‐Arginine (l ‐Arg) into NO for enhanced gas therapy. By using hollow mesoporous organosilica nanoparticle (HMON) as a biocompatible/biodegradable nanocarrier for the co‐delivery of GOx and l ‐Arg, a novel glucose‐responsive nanomedicine (l ‐Arg‐HMON‐GOx) has been for the first time constructed for synergistic cancer starving‐like/gas therapy without the need of external excitation, which yields a remarkable H₂O₂–NO cooperative anticancer effect with minimal adverse effect.     

Supramolecular Fluorescent Nanoparticles Constructed via Multiple Non‐Covalent Interactions for the Detection of Hydrogen Peroxide in Cancer Cells

Overabundance of hydrogen peroxide originating from environmental stress and/or genetic mutation can lead to pathological conditions. Thus, the highly sensitive detection of H₂O₂ is important. Herein, supramolecular fluorescent nanoparticles self‐assembled from fluorescein isothiocyanate modified β‐cyclodextrin (FITC‐β‐CD)/rhodamine B modified ferrocene (Fc‐RB) amphiphile were prepared through host–guest interaction between FITC‐β‐CD host and Fc‐RB guest for H₂O₂ detection in cancer cells. The self‐assembled nanoparticles based on a combination of multiple non‐covalent interactions in aqueous medium showed high sensitivity to H₂O₂ while maintaining stability under physiological condition. Owing to the fluorescence resonance energy transfer (FRET) effect, addition of H₂O₂ led to obvious fluorescence change of nanoparticles from red (RB) to green (FITC) in fluorescent experiments. In vitro study showed the fluorescent nanoparticles could be efficiently internalized by cancer cells and then disrupted by endogenous H₂O₂, accompanying with FRET from “on” to “off”. These supramolecular fluorescent nanoparticles constructed via multiple non‐covalent interactions are expected to have potential applications in diagnosis and imaging of diseases caused by oxidative stresses.     

Hydrogen‐bonded complexes of 2‐pyridone with centrosymmetric and non‐centrosymmetric dicarboxylic acids

2‐Pyridone (2‐oxo­pyrimidine) forms hydrogen‐bonded com­plexes with di­carboxyl­ic acids, the molar ratio of 2‐pyridone/di­carboxyl­ic acid being 2:1 for the complexes with oxalic acid (ethanedioic acid), 2C₅H₅NO·C₂H₂O₄, (I), and trans‐β‐hydro­muconic acid (trans‐hex‐3‐enedioic acid), 2C₅H₅NO·C₆H₈O₄, (II), and 1:1 for the complexes with trans‐glutaconic acid (trans‐pent‐2‐enedioic acid), C₅H₅NO·C₅H₆O₄, (III), and l ‐­tartaric acid (l ‐2,3‐di­hydroxy­butane­dioic acid), C₅H₅NO·C₄H₆O₆·H₂O, (IV). Common features in the hydrogen‐bonding patterns were found for the centrosymmetric and non‐centrosymmetric acids, respectively. The 2‐pyridone mol­ecule takes the lactam form in these crystals.     

Two succinic acid derivatives of 2‐ethyl‐6‐methylpyridin‐3‐ol

Crystals of bis(2‐ethyl‐3‐hydroxy‐6‐methylpyridinium) succinate–succinic acid (1/1), C₈H₁₂NO⁺·0.5C₄H₄O₄²⁻·0.5C₄H₆O₄, (I), and 2‐ethyl‐3‐hydroxy‐6‐methylpyridinium hydrogen succinate, C₈H₁₂NO⁺·C₄H₅O₄⁻, (II), were obtained by reaction of 2‐ethyl‐6‐methylpyridin‐3‐ol with succinic acid. The succinate anion and succinic acid molecule in (I) are located about centres of inversion. Intermolecular O—H...O, N—H...O and C—H...O hydrogen bonds are responsible for the formation of a three‐dimensional network in the crystal structure of (I) and a two‐dimensional network in the crystal structure of (II). Both structures are additionally stabilized by π–π interactions between symmetry‐related pyridine rings, forming a rod‐like cationic arrangement for (I) and cationic dimers for (II).     

3‐Germyl‐3,3‐di­methyl­propionic acid derivatives

The crystal structures of 3,3‐di­methyl‐3‐(tri­chloro­germyl)­propionic acid, [Ge(C₅H₉O₂)Cl₃], 3,3‐di­methyl‐3‐(tri­phenyl­germyl)­propionic acid, [Ge(C₆H₅)₃(C₅H₉O₂)], and 3,3‐di­methyl‐3‐(tri‐p‐toly­lgermyl)­propionic acid, [Ge(C₇H₇)₃(C₅H₉O₂)], have slightly distorted tetrahedral geometries about the Ge atoms. All the structures form dimers via strong O—H·O hydrogen bonds, resulting in eight‐membered rings that can be best described in terms of graph‐set notation (8).     

An Enzyme‐free H2O2 Sensor Based on Poly(2‐Aminophenylbenzimidazole)/Gold Nanoparticles Coated Pencil Graphite Electrode

A poly(2‐aminophenylbenzimidazole)/gold nanoparticles (P2AB/AuNPs) coated disposable pencil graphite electrode (PGE) was fabricated as an enzyme‐free sensor for the H₂O₂ determination. P2AB/AuNPs and P2AB were successfully synthesized electrochemically on PGE in acetonitrile for the first time. The coatings were characterized by scanning electron microscopy, X‐ray diffraction spectroscopy, Energy‐dispersive X‐ray spectroscopy, Surface‐enhanced Raman spectroscopy, and UV‐Vis spectroscopy. AuNPs interacted with P2AB as carrier enhances the electrocatalytic activity towards reduction of H₂O₂. The analytical performance was evaluated in a 100 mM phosphate buffer solution at pH 6.5 by amperometry. The steady state current vs. H₂O₂ concentration is linear in the range of 0.06 to 100 mM (R²=0.992) with a limit of detection 3.67×10^?5 M at ?0.8 V vs. SCE and no interference is caused by ascorbic acid, dopamine, uric acid, and glucose. The examination for the sensitive determination of H₂O₂ was conducted in commercially available hair oxidant solution. The results demonstrate that P2AB/AuNPs/PGE has potential applications as a sensing material for quantitative determination of H₂O₂.     

Highly Sensitive Electrochemical Hydrogen Peroxide Sensor Based on Iron Oxide‐Reduced Graphene Oxide‐Chitosan Modified with DNA‐Celestine Blue

The present study describes a novel and very sensitive electrochemical assay for determination of hydrogen peroxide (H₂O₂) based on synergistic effects of reduced graphene oxide‐ magnetic iron oxide nanocomposite (rGO‐Fe₃O₄) and celestine blue (CB) for electrochemical reduction of H₂O₂. rGO‐Fe₃O₄ nanocomposite was synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X‐ray diffraction (XRD), electrochemical impedance spectroscopy and cyclic voltammetry. Chitosan (Chit) was used for immobilization of amino‐terminated single‐stranded DNA (ss‐DNA) molecules via a glutaraldehyde (GA) to the surface of rGO‐Fe₃O₄. The MTT (3‐(4,5‐Dim ethylt hiazol‐2‐yl)‐2,5‐diphenylt etrazolium bromide) results confirmed the biocompatibility of nanocomposite. Experimental parameters affecting the ss‐DNA molecules immobilization were optimized. Finally, by accumulation of the CB on the surface of the rGO‐Fe₃O₄‐Chit/ssDNA, very sensitive amperometric H₂O₂ sensor was fabricated. The electrocatalytic activity of the rGO‐Fe₃O₄‐Chit/DNA‐CB electrode toward H₂O₂ reduction was found to be very efficient, yielding very low detection limit (DL) of 42 nM and a sensitivity of 8.51 μA/μM. Result shows that complex matrices of the human serum samples did not interfere with the fabricated sensor. The developed sensor provided significant advantages in terms of low detection limit, high stability and good reproducibility for detection of H₂O₂ in comparison with recently reported electrochemical H₂O₂ sensors.     

A two‐dimensional copper(II) coordination polymer based on 2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid

Single‐crystal X‐ray diffraction analysis of poly[bis(μ₂‐5‐carboxy‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ³N³,O⁴:O⁵)copper(II)], [Cu(C₈H₉N₂O₄)₂)]_n, indicates that one carboxylic acid group of the 2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PDI) ligand is deprotonated. The resulting H₂PDI⁻ anion, acting as a bridge, connects the Cu^II cations to form a two‐dimensional (4,4)‐connected layer. Adjacent layers are further linked through interlayer hydrogen‐bond interactions, resulting in a three‐dimensional supramolecular structure.     

Anthraquinone Redox Relay for Dye‐Sensitized Photo‐electrochemical H2O2 Production

Anthraquinone (AQ) redox mediators are introduced to metal‐free organic dye sensitized photo‐electrochemical cells (DSPECs) for the generation of H₂O₂. Instead of directly reducing O₂ to produce H₂O₂, visible‐light‐driven AQ reduction occurs in the DSPEC and the following autooxidation with O₂ allows H₂O₂ accumulation and AQ regeneration. In an aqueous electrolyte, under 1 sun conditions, a water‐soluble AQ salt is employed with the highest photocurrent of up to 0.4 mA cm^?2 and near‐quantitative faradaic efficiency for producing H₂O₂. In a non‐aqueous electrolyte, under 1 sun illumination, an organic‐soluble AQ is applied and the photocurrent reaches 1.8 mA cm^?2 with faradaic efficiency up to 95 % for H₂O₂ production. This AQ‐relay DSPEC exhibits the highest photocurrent so far in non‐aqueous electrolytes for H₂O₂ production and excellent acid stability in aqueous electrolytes, thus providing a practical and efficient strategy for visible‐light‐driven H₂O₂ production.     

Simultaneous quantification of catecholamines in rat brain by high‐performance liquid chromatography with on‐line gold nanoparticle‐catalyzed luminol chemiluminescence detection

A new method based on high‐performance liquid chromatography (HPLC) coupled with on‐line gold nanoparticle‐catalyzed luminol chemiluminescence (CL) detection was developed for the simultaneous quantitation of catecholamines in rat brain. In the present CL system, gold nanoparticles were produced by the on‐line reaction of H₂O₂, NaHCO₃?Na₂CO₃ (buffer solution of luminol) and HAuCl_4. Norepinephrine (NE), epinephrine (EP) and dopamine (DA) could strongly enhance the CL signal of the on‐line gold nanoparticle‐catalyzed luminol system. The UV?visible absorption spectra and transmission electron microscopy studies were carried out, and the CL enhancement mechanism was proposed. Catecholamines promoted the on‐line formation of more gold nanoparticles, which better catalyzed the luminol–H₂O₂ CL reaction. The good separation of NE, EP and DA was achieved with isocratic elution using a mixture of methanol and 0.2% aqueous phosphoric acid (5:95, v/v) within 8.5 min. Under the optimized conditions, the detection limits, defined as a signal‐to‐noise ratio of 3, were in the range of 1.32–1.90 ng/mL, corresponding to 26.4?38.0 pg for 20 μL sample injection. The recoveries of catecholamines added to rat brain sample were >94.6%, with the precisions <5.5%. The validated HPLC?CL method was successfully applied to determine NE and DA in rat brain without prior sample purification. Copyright © 2014 John Wiley & Sons, Ltd.