Hypochlorous acid turn-on boron dipyrromethene probe based on oxidation of methyl phenyl sulfide

A boron dipyrromethene (BODIPY)-based fluorometric probe, HCS, has been successfully developed for the highly sensitive and selective detection of hypochlorous acid (HOCl). The probe is based on the specific HOCl-promoted oxidation of methyl phenyl sulfide. The reaction is accompanied by a 160-fold increase in the fluorescent quantum yield (from 0.003 to 0.480). The fluorescent turn-on mechanism is accomplished by suppression of photoinduced electron transfer (PET) from the methyl phenyl sulfide group to BODIPY. The fluorescence intensity of the reaction between HOCl and HCS shows a good linearity in the HOCl concentration range 1–10 μM. The detection limit is 23.7 nM (S/N = 3). In addition, confocal fluorescence microscopy imaging using RAW264.7 macrophages demonstrates that the HCS probe could be an efficient fluorescent detector for HOCl in living cells.     

Novel fluorescent probe based on dicoumarin for detection of hydrogen sulfide in real samples

A novel dicoumarin-derived hydrogen sulfide (H₂S) selective fluorescent “turn-on” probe 3-(2,4-dinitrobenzenesulfonate)-dicoumarin (DC-HS) created by covalent bonding between the 2,4-dinitrobenzenesulfonyl (DNBS) and the 3-hydroxy-dicoumarin (DC-OH) units. Upon the addition of H₂S, the probe DC-HS solution's fluorescence significantly increased, and its appearance is changed from practically colorless to brilliant yellow. Probe DC-HS also showed significant fluorescence amplification that was quantitatively detectable in the concentration range of 0–1.5 μM and had a low detection limit or limit of detection of 0.2 nM. Moreover, with a high recovery rate and excellent accuracy, the developed fluorescent molecule was used successfully for the analysis of H₂S in red wine samples.     

A fluorescence turn-on probe for cysteine and homocysteine based on thiol-triggered benzothiazolidine ring formation

We synthesized a new coumarin-based probe TP, containing a disulfide moiety, to detect biothiols in cells. A fluorescence turn-on response is induced by the thiol–disulfide exchange of the probe, with subsequent intramolecular benzothiazolidine ring formation giving rise to a fluorescent product. The probe exhibits an excellent selectivity for cysteine (Cys) and homocysteine (Hcy) over glutathione (GSH) and other amino acids. The fluorescent probe also exhibits a highly sensitive fluorescence turn-on response to Cys and Hcy with detection limits of 0.8 μM for Cys and 0.5 μM for Hcy. In addition, confocal fluorescence microscopy imaging using RAW264.7 macrophages demonstrates that the probe TP could be an efficient fluorescent detector for thiols in living cells.     

Fluorescent detection of single nucleotide polymorphism utilizing a hairpin DNA containing a nucleotide base analog pyrrolo-deoxycytidine as a fluorescent probe

A novel fluorescent method for the detection of single nucleotide polymorphism (SNP) was developed using a hairpin DNA containing nucleotide base analog pyrrolo-deoxycytidine (P-dC) as a fluorescent probe. This fluorescent probe was designed by incorporating a fluorescent P-dC into a stem of the hairpin DNA, whose sequence of the loop moiety complemented the target single strand DNA (ss-DNA). In the absence of the target ss-DNA, the fluorescent probe stays a closed configuration in which the P-dC is located in the double strand stem of the fluorescent probe, such that there is weak fluorescence, attributed to a more efficient stacking and collisional quenching of neighboring bases. In the presence of target ss-DNA, upon hybridizing the ss-DNA to the loop moiety, a stem-loop of the fluorescent probe is opened and the P-dC is located in the ss-DNA, thus resulting in strong fluorescence. The effective discrimination of the SNP, including single base mismatch ss-DNA (A, T, G) and double mismatch DNA (C, C), against perfect complementary ss-DNA was achieved by increased fluorescence intensity, and verified by thermal denaturation and circular dichroism spectroscopy. Relative fluorescence intensity had a linear relationship with the concentration of perfect complementary ss-DNA and ranged from 50 nM to 3.0 μM. The linear regression equation was F/F₀ = 2.73 C (μM) + 1.14 (R = 0.9961) and the detection limit of perfect complementary ss-DNA was 16 nM (S/N = 3). This study demonstrates that a hairpin DNA containing nucleotide base analog P-dC is a promising fluorescent probe for the effective discrimination of SNP and for highly sensitive detection of perfect complementary DNA.     

A fluorescein-based fluorogenic and chromogenic chemodosimeter for the sensitive detection of sulfide anion in aqueous solution

A highly sensitive chromo- and fluorogenic chemodosimeter for sulfide anion was developed based on its nucleophilicity. 2,4-Dinitrobenzenesulfonyl-fluorescein (I) is a weakly fluorescent compound. Upon mixing with sulfide anion in aqueous acetone solution, the 2,4-dinitrobenzenesulfonyl group of I was efficiently removed and highly fluorescent fluorescein was released, hence leading to the dramatic increases in both fluorescence and absorbance of the reaction solution. The fluorescence increment is linear with sulfide anion concentration in the range 50-1000 nmol L⁻¹ with a detection limit of 4.3 nmol L⁻¹ (3σ). The proposed chemodosimeter showed excellent selectivity toward sulfide anion and was successfully applied to the determination of sulfide anion in synthetic wastewater samples.     

A sensitive and selective detection method for thiol compounds using novel fluorescence probe

In this work, a sensitive and selective detection method based on fluorescence resonance energy transfer (FRET) was developed for analyzing thiol compounds by using a novel fluorescent probe. The new fluorescent probe contains a disulfide bond which selectively reacts with nucleophilic thiolate through the thiol-disulfide exchange reaction. An obvious fluorescence recovery can be observed upon addition of the thiol compound in the fluorescent probe solution due to the thiol-disulfide exchange reaction and the destruction of FRET. This novel probe was successfully used to determine dithiothreitol (DTT), glutathione (GSH) and cysteine (Cys). The limits of detection (LOD) were 2.0 μM for DTT, 0.6 μM for GSH, and 0.8 μM for Cys. This new detection method was further investigated in the analysis of compound amino acid injection.     

A highly selective turn-on fluorescent probe for hypochlorous acid based on hypochlorous acid-induced oxidative intramolecular cyclization of boron dipyrromethene-hydrazone

A BODIPY-based fluorescent probe, HBP, was developed for the detection of hypochlorous acid based on the specific hypochlorous acid-promoted oxidative intramolecular cyclization of heterocyclic hydrazone in response to the amount of HOCl. The reaction is accompanied by a 41-fold increase in the fluorescent quantum yield (from 0.004 to 0.164). The fluorescence intensity of the reaction between HOCl and HBP is linear in the HOCl concentration range of 1–8 μM with a detection limit of 2.4 nM (S/N = 3). Confocal fluorescence microscopy imaging using RAW264.7 cells showed that the new probe HBP could be used as an effective fluorescent probe for detecting HOCl in living cells.     

A colorimetric and fluorescent turn-on chemosensor for Zn based on an azobenzene-containing compound

This paper presents a new colorimetric reversible fluorescent turn-on chemosensor molecule for zinc ion based on an azobenzene derivative. The basal fluorescence intensity of the chemosensor molecule is little affected under physiological pH 5-9, whilst the excitation (507 nm) and emission (610 nm) wavelength of the molecular probe for zinc ion is in the visible range.     

Micelle-induced multiple performance improvement of fluorescent probes for H2S detection

In this paper, two colorimetric and turn-on fluorescent probes N-[2-(2-hydroxy)-ethoxy] ethyl-4-azido-1,8-naphthalimide (SS1) and N-butyl-4-azido-1,8-naphthalimide (SS2) for selective recognition of H₂S were designed and synthesized. The probes were constructed by incorporating an azido group into the naphthalimide fluorophore as a specifical reaction group for sulfide utilizing its reducing property. Once treated with H₂S, the azido groups of the probes were converted to amino groups and the solutions’ color changed from colorless to yellow companied with a strong yellow-green fluorescence. Rapid and sensitive responses of the probes towards H₂S were achieved in the presence of cationic surfactant cetyltrimethyl ammonium bromide (CTAB): the reaction was completed within 10 min in CTAB compared to more than 4 h in buffer solution, and the detection limit decreased from 0.5 μM to 20 nM. High selectivity and good competition of both probes towards H₂S over other 11 ions and 2 reducing agents were realized in CTAB micelle. An overall linear concentration range of 0.05 μM to 1 mM was achieved with the assistance of differently charged surfactants CTAB and sodium dodecyl sulfate (SDS). The probes were applied to rapidly and sensitively detect H₂S levels in fetal bovine serum without any pretreatment of the sample.     

Novel high-sensitive fluorescent detection of deoxyribonuclease I based on DNA-templated gold/silver nanoclusters

Herein, fluorescent DNA-templated gold/silver nanoclusters (DNA-Au/Ag NCs) are presented as a novel probe for sensitive detection of deoxyribonuclease I (DNase I). The procedure is based on quenching fluorescence of DNA-Au/Ag NCs by DNase I digestion of the DNA (5′-CCCTTAATCCCC-3′) template. This decrease in fluorescence intensity permitted sensitive detection of DNase I in a linear range of 0.013–60 μg mL⁻¹, with a detection limit of 3 ng mL⁻¹ at a signal-to-noise ratio of 3. Furthermore, the practicality of this probe for detection of DNase I in human serum and saliva samples was validated, demonstrating its advantages of simplicity, selectivity, sensitivity and low cost. Importantly, satisfactory agreement between results obtained by the fluorescent method described here and high performance liquid chromatography (HPLC) further confirmed the reliability and accuracy of this approach.     

2-Aminopurine hairpin probes for the detection of ultraviolet-induced DNA damage

Nucleic acid exposure to radiation and chemical insults leads to damage and disease. Thus, detection and understanding DNA damage is important for elucidating molecular mechanisms of disease. However, current methods of DNA damage detection are either time-consuming, destroy the sample, or are too specific to be used for generic detection of damage. In this paper, we develop a fluorescence sensor of 2-aminopurine (2AP), a fluorescent analogue of adenine, incorporated in the loop of a hairpin probe for the quantification of ultraviolet (UV) C-induced nucleic acid damage. Our results show that the selectivity of the 2AP hairpin probe to UV-induced nucleic acid damage is comparable to molecular beacon (MB) probes of DNA damage. The calibration curve for the 2AP hairpin probe shows good linearity (R² = 0.98) with a limit of detection of 17.2 nM. This probe is a simple, fast and economic fluorescence sensor for the quantification of UV-induced damage in DNA.     

Novel B,O-chelated fluorescent probe for nitric oxide imaging in Raw 264.7 macrophages and onion tissues

A novel fluorescent probe based on B,O-chelated dipyrromethene chromophore in far-visible and near-infrared spectral region (600–900 nm), boron chelated 8-(3,4-diaminophenyl)-3,5-bis(2-hydroxyphenyl)-4-bora-3a,4a-diaza-s-indancene (BOPB), has been first developed for nitric oxide (NO) imaging. BOPB, a turn-on fluorescent probe, can react with NO rapidly under physiological condition. The reaction product of BOPB with NO, BOPB-T, emits bright red fluorescence at 643 nm when excited at 622 nm. Meanwhile, BOPB-T displays high fluorescent quantum yield of 0.21 and good photostability. The selectivity for NO over other reactive oxygen/nitrogen species and ascorbic acid has been investigated and BOPB has good specificity for the detection of NO. MTT assay shows that the toxicity of BOPB (below 10 μM) to living cells can be neglected. Based on these investigations, BOPB has been used for NO imaging in Raw 264.7 cells and onion tissues. Meanwhile, mechanical injury to onion tissues results in a brighter fluorescence around the wound, which indicates that more NO has been produced in plant tissues in response to external stimuli. Our studies illustrate that BOPB has advantages of high sensitivity, low background interference and little photo damage on fluorescence imaging of NO.     

Determination of non-protein cysteine in human serum by a designed BODIPY-based fluorescent probe

A novel fluorescent probe is designed and synthesized for the determination of cysteine in biological samples by incorporating 2,4-dinitrobenzenesulfonyl (DBS) group as a quencher into the BODIPY skeleton. The BODIPY-based probe itself shows weak fluorescence due to the strong intramolecular charge transfer process. Upon reaction with cysteine, however, the probe produces a rapid and large fluorescence enhancement through the removal of the DBS unit by nucleophilic aromatic substitution. This valuable property leads to the development of a new and simple method for cysteine assay. Under the optimized conditions, the fluorescence enhancement value is directly proportional to the concentration of cysteine in the range 2-12 μM, with a detection limit of 30 nM (S/N = 3). The applicability of the developed method has been successfully demonstrated on the determination of non-protein cysteine in human serum. Compared to most of the existing fluorescent probes proposed for cysteine, the BODIPY-based one exhibits an excellent overall performance in terms of selectivity, sensitivity and simplicity.     

Ultrasensitive mercury(II) ion detection by europium(III)-doped cadmium sulfide composite nanoparticles

With the biomolecule glutathione (GSH) as a capping ligand, Eu³⁺-doped cadmium sulfide composite nanoparticles were successfully synthesized through a straightforward one-pot process. An efficient fluorescence energy transfer system with CdS nanoparticles as energy donor and Eu³⁺ ions as energy accepter was developed. As a result of specific interaction, the fluorescence intensity of Eu³⁺-doped CdS nanoparticles is obviously reduced in the presence of Hg²⁺. Moreover, the long fluorescent lifetime and large Stoke's shift of europium complex permit sensitive fluorescence detection. Under the optimal conditions, the fluorescence intensity of Eu³⁺ at 614 nm decreased linearly with the concentration of Hg²⁺ ranging from 10 nmol L⁻¹ to 1500 nmol L⁻¹, the limit of detection for Hg²⁺ was 0.25 nmol L⁻¹. In addition to high stability and reproducibility, the composite nanoparticles show a unique selectivity towards Hg²⁺ ion with respect to common coexisting cations. Moreover, the developed method was applied to the detection of trace Hg²⁺ in aqueous solutions. The probable mechanism of reaction between Eu³⁺-doped CdS composite nanoparticles and Hg²⁺ was also discussed.     

Aptamer-mediated turn-on fluorescence assay for prion protein based on guanine quenched fluophor

An aptamer-participated haprin structure was designed by employing cellular prion protein (PrP^C) as a model protein, and thus an aptamer-mediated turn-on fluorescence assay for proteins was developed in this contribution. The designed aptamer-participated haprin structure consists of three segments. Namely, an aptamer sequence located in the loop, three guanine bases at 3′-terminal, and a fluophor modified at 5′-terminal. It was found that the guanine bases at the 3′-terminal could quench the fluorescence of the fluophor such as tetramethyl-6-carboxyrhodamine (TAMRA) at the 5′-terminal about 76.6% via electron transfer if the guanine bases are close enough to the fluophor, and the quenched fluorescence could get restored when the target protein is present since the interaction, which could be confirmed by measuring fluorescence lifetime, between TAMRA-aptamer and the target protein forces the guanines away from TAMRA so that TAMRA-modified aptamer changes into turn-on state. A linear relationship was then constructed between the turn-on fluorescence intensity and the concentration of PrP^C in the range from 1.1 to 44.7 μg/mL with a limit of detection of 0.3 μg/mL (3σ).     

Spectrofluorimetric determination of trace nitrite in food products with a new fluorescent probe 1,3,5,7-tetramethyl-2,6-dicarbethoxy-8-(3',4'-diaminophenyl)-difluoroboradiaza-s-indacene

A new fluorescent probe 1,3,5,7-tetramethyl-2,6-dicarbethoxy-8-(3′,4′-diaminophenyl)-difluoroboradiaza-s-indacene (TMDCDABODIPY) has been developed to detect nitrite in meat products and vegetables. The fluorescence of TMDCDABODIPY is very weak, but when it reacts with nitrite, a strong fluorescent triazole forms in aqueous medium at room temperature, which offers the advantage of specificity and sensitivity for the determination of nitrite. The fluorescence intensity was linear over a nitrite concentration of 9-300 nmol l⁻¹ with a detection limit of 0.21 nmol l⁻¹ (S/N = 3). The proposed method has been used for the determination of trace nitrite in food products with the recoveries of 94.62-105.48%.     

Selective labeling of histidine by a designed fluorescein-based probe

The synthesis of a novel fluorescent probe, 3-epoxypropoxy fluorescein (EPF), and its properties for labeling of histidine are described. The probe contained a fluorescein fluorophore with long-wavelength response and an active epoxy labeling group. In alkaline media EPF reacted selectively with histidine, rather than with other amino acids, causing a large increase in fluorescence intensity and thereby allowing a selective detection of histidine. This fluorescence increase resembled that of the fluorescein diaion with the increase of the media basicity, suggesting that the addition reaction of histidine with the epoxy group provides the fluorophore moiety with a basic molecular environment. As an application of this probe, fluorescent labeling of histidine in human serum was attempted and the obtained results were in agreement with those given by using histidine-nickel complex adsorptive voltammetry. Further, the relative S.D. of the method was 1.8% for 10 replicate determinations of 0.55 μM histidine. When 10 μM of EPF was used, the linear range for histidine was 0.007-10 μM with a detection limit (S/N=3) of 0.001 μM.     

A functionalized gold nanoparticles and Rhodamine 6G based fluorescent sensor for high sensitive and selective detection of mercury(II) in environmental water samples

A gold-nanoparticles (Au NPs)-Rhodamine 6G (Rh6G) based fluorescent sensor for detecting Hg (II) in aqueous solution has been developed. Water-soluble and monodisperse gold nanoparticles (Au NPs) has been prepared facilely and further modified with thioglycolic acid (TGA). Free Rh6G dye was strongly fluorescent in bulk solution. The sensor system composing of Rh6G and Au NPs fluoresce weakly as result of fluorescence resonance energy transfer (FRET) and collision. The fluorescence of Rh6G and Au NPs based sensor was gradually recovered due to Rh6G units departed from the surface of functionalized Au NPs in the presence of Hg(II). Based on the modulation of fluorescence quenching efficiency of Rh6G-Au NPs by Hg(II) at pH 9.0 of teraborate buffer solution, a simple, rapid, reliable and specific turn-on fluorescent assay for Hg(II) was proposed. Under the optimum conditions, the fluorescence intensity of sensor is proportional to the concentration of Hg(II). The calibration graphs are linear over the range of 5.0 × 10⁻¹⁰ to 3.55 × 10⁻⁸ mol L⁻¹, and the corresponding limit of detection (LOD) is low as 6.0 × 10⁻¹¹ mol L⁻¹. The relative standard deviation of 10 replicate measurements is 1.5% for 2.0 × 10⁻⁹ mol L⁻¹ Hg(II). In comparison with conventional fluorimetric methods for detection of mercury ion, the present nanosensor endowed with higher sensitivity and selectivity for Hg(II) in aqueous solution. Mercury(II) of real environmental water samples was determined by our proposed method with satisfactory results that were obtained by atomic absorption spectroscopy (AAS).     

Unfolding with mercury: anthracene-oxyquinoline dyad as a fluorescent indicator for Hg(II)

An anthracene-oxyquinoline dyad (HQ-AN) is synthesized which acts as a selective fluorescent reporter for Hg(II) with a detection limit of 3.2 × 10⁻⁶ M in acetonitrile-water system. The phenomenon of unfolding of HQ-AN from its initial folded conformation in acetonitrile-water system, selectively in the presence of Hg(II) is indicated from spectrofluorometric studies. The sensing event is monitored by the marked change in fluorescence emission occurring due to quenching of the excimer and retaining of the monomer emission of the two anthracene units in HQ-AN.     

A novel resorufin based fluorescent “turn-on” probe for the selective detection of hydrazine and application in living cells

In this study, a resorufin derivative RTP-1, which is a novel fluorescent ‘‘turn-on' probe for sensitive detection of hydrazine within 30 min, is designed and synthesized. The selective deprotection of the ester group of the probe by hydrazine led to a prominent enhancement of fluorescent intensity, as well as a remarkable color change from colorless to pink, which could be distinguished by naked eye. The fluorescence enhancement showed decent linear relationship with hydrazine concentration ranging from 0 to 50 mmol/L, with a detection limit of 0.84 mmol/L. The specificity of RTP-1 for hydrazine to a number of metal ions, anions and amines is satisfactory. The sensing mechanism of RTP-1 and hydrazine was evaluated by HPLC, ESI mass spectrometry and density functional theory(DFT).Moreover, we have utilized this fluorescent probe for imaging hydrazine in living cells, and the fluorescence was clearly observed when the cells were incubated with hydrazine(100 mmol/L) for 30 min.