光敏感双亲性梳状SMA聚合物的合成及其胶束化

以含香豆素型苯乙烯类光敏单体(coumarin-containing styrene monomer, CS)与苯乙烯(St)、马来酸酐(MA)为反应单体, 以偶氮二异丁腈(AIBN)为引发剂制备了光敏感三元苯乙烯-马来酸酐共聚物(SMA)双亲交替聚合物P(St/CS-alt-MA), 再利用羧酸酐基元与正辛胺的室温胺解反应获得光敏感双亲性梳状聚合物P(St/CS-alt-MAA8). 用傅立叶变换红外光谱(FTIR)、凝胶渗透色谱(GPC)、1H核磁共振(1H-NMR)等对该双亲梳状聚合物进行结构表征. 通过香豆素基元的光二聚作用, 使梳状聚合物溶解在DMSO中进行光照预交联; 非交联与预交联聚合物分别在选择性溶剂中自组装形成胶束; 利用羧酸基元与NaOH的离子化作用改变聚合物胶束的亲疏水性质. 动态激光光散射(DLS)与芘荧光探针实验表明预交联聚合物胶束较非交联胶束粒径大, 负载芘的能力强; 离子化作用使聚合物胶束解离重组成粒径更小的胶束, 但预交联胶束较非交联胶束小, 离子化后胶束疏水微区更加紧密, 负载芘的能力也增大.     

光敏共聚物P(St/VM-co-MA)自组装胶体粒子及其性能

以苯乙烯类光敏单体7-(4-乙烯基苄氧基)-4-甲基香豆素(VM)、苯乙烯(St)、马来酸酐(MA)为共聚单体,采用自由基聚合法制备了光敏性双亲共聚物P(St/VM-co-MA).在选择性溶剂(N,N-二甲基甲酰胺(DMF)/H2O)中对P(St/VM-co-MA)进行自组装,用透射电镜(TEM)和动态激光光散射(DLS)表征了自组装胶体粒子的形态、粒径大小及其分布.利用紫外光照使胶体粒子中香豆素基元发生光二聚反应,形成交联胶体粒子,并用紫外-可见光分光光度计(UV-Vis)跟踪其交联过程.用DLS研究了交联和未经交联胶体粒子的粒径和结构稳定性,用激光扫描共聚焦显微镜(LSCM)和光学显微镜考察了胶体粒子的乳化、包覆性能.结果表明:交联和未经交联胶体粒子均具有乳化性,且在乳化过程中可实现对油溶性染料的包覆.胶体粒子交联后,粒径有所减小,结构稳定性、乳化性能、包覆性能均有所提高.     

光敏性无规共聚物P(FA_2C-co-AA)的自组装及乳化性能

光敏性单体ε-己内酯改性丙烯酸酯肉桂酸酯(FA2C)与丙烯酸(AA)在偶氮二异丁腈(AIBN)的引发作用下,于N,N-二甲基甲酰胺(DMF)中发生自由基共聚反应,制备了具有光敏性的双亲无规共聚物P(FA2C-co-AA)。以红外光谱、凝胶渗透色谱、差示扫描量热和紫外光谱等分析测试手段对共聚产物进行了表征。P(FA2C-co-AA)在选择性溶剂DMF水溶液中自组装得到纳米粒径的胶体粒子。用紫外光引发胶体粒子内双键发生光交联反应,得到稳定的胶体粒子,并用动态激光光散射(DLS)表征了胶体粒子交联前后的粒径变化。结果表明:该胶体粒子具有良好的乳化性能。     

探索光敏性共聚物P(St/CS-alt-MA)的自组装及其乳化行为

以苯乙烯(St)、马来酸酐(MA)、香豆素苯乙烯醚化物(CS)为单体, 通过自由基溶液聚合合成了双亲性交替共聚物P(St/CS-alt-MA), 用凝胶渗透色谱、核磁共振等对聚合物结构进行表征, 并对其溶液自组装及组装体的乳化性进行了研究. 结果表明双亲性P(St/CS-alt-MA)可以在选择性溶剂中进行自组装形成马来酸酐单元为亲水微区、CS与苯乙烯单元为疏水微区的胶体粒子, 用紫外分光光度计, XPS, TEM研究了聚合物胶体粒子性质, 结果显示, P(St/CS-alt-MA)在水溶液中可以形成两亲性聚合物胶体粒子, 亲水单元在胶粒表面富集, 该两亲性聚合物胶体粒子具有良好的乳化性能.     

双亲性无规共聚物P（VM-co-AMPS）的自组装及其性能

以2-丙烯酰胺基-2-甲基丙磺酸（AMPS）和苯乙烯类光敏单体7-（4-乙烯基苄氧基）-4-甲基香豆素（VM）为共聚单体,采用自由基聚合法制备了光敏性双亲共聚物P（VM-co-AMPS）。P（VM-co-AMPS）在溶剂水中自组装胶束化,用原子力显微镜（AFM）表征了自组装胶体粒子的形态、粒径及其分布。紫外光照使胶体粒子中香豆素基元发生光二聚反应,用紫外-可见光分光光度计（UV-Vis）跟踪其光二聚交联过程,用光学显微镜考察了胶体粒子的乳化性能。结果表明：胶体粒子具有较好的紫外吸收性能和较好的乳化性能。该胶束制备工艺简单,条件温和,避免了溶剂的使用。     

光敏性双亲共聚物在水溶液中的胶束化行为

通过ε-己内酯改性丙烯酸酯(FAa，n=1～4)与肉桂酰氯间的酰化反应合成了一系列光敏性大单体(FAaC)，与甲基丙烯酸(MAA)在溶液中进行自由基聚合，制备了具有光敏性的双素无规共聚物(PMFAaC)。将PMFAaC在选择性溶剂中进行自组装，可以形成纳米结构的聚合物。用动态激光光散射(DLS)研究了聚合物胶束的溶液行为，同时考察了单体含量、聚合物终浓度、聚合物侧链长、pH值、离子强度及温度等因素对胶束粒径的影响。实验结果表明，PMFAaC在选择性溶剂中可自组装成胶束，其粒径及其分布对单体含量、聚合物终浓度、聚合物侧链长、pH值、离子强度等有一定的依赖性，而对温度无依赖性。进一步用紫外光使肉桂酰基发生交联反应。从而制备得到核交联且稳定的纳米胶束。用DIS表征发现交联后的胶束粒径较交联前的小。     

交替共聚物P(St-alt-Ma-Dopa)的自组装及乳化性能

以二甲亚砜(DMSO)为溶剂, 用多巴胺(Dopamine)胺解聚(苯乙烯-alt-马来酸酐)(P(St-alt-Man))制备双亲交替共聚物P(St-alt-Ma-Dopa). 在选择性溶剂(N,N-二甲基甲酰胺(DMF)/水)中对P(St-alt-Ma-Dopa)进行溶液自组装, 用紫外分光光度计(UV)、透射电镜(TEM)、荧光探针技术、zeta电位仪等技术研究了添加剂(HCl, NaOH或NaCl)对P(St-alt-Ma-Dopa)自组装行为的影响及其胶体粒子的乳化性能. 结果表明, P(St-alt-Ma-Dopa)链在选择性溶剂(DMF/水)中可自组装形成球状胶体颗粒, 其临界聚集水含量(CWC)明显大于P(St-alt-Man). 体系的pH值、盐浓度等对P(St-alt-Ma-Dopa)胶体粒子的性质(粒子大小、zeta电位、亲疏水性等)有较大的影响, 引入多巴胺结构使交替共聚物胶体粒子的乳化性能有所提高.     

肉桂酸改性透明质酸颗粒乳化剂的制备及性能

将具有紫外吸收性能的单体肉桂酸(CA)引入天然大分子透明质酸(HA)中,制得疏水性改性HA(HA-CA),然后在二甲亚砜与水的混合溶剂中自组装制备HA-CA胶体粒子,并以之为颗粒乳化剂稳定油水界面制备Pickering乳液。通过紫外、核磁、纳米粒度仪、透射电镜、光学显微镜等方法对HA-CA、HA-CA胶体粒子及其所稳定的乳液进行表征。结果表明,HA-CA可以在选择性溶剂中自组装形成粒径约为95nm的球形胶体粒子;所得的HA-CA胶体粒子可以有效地稳定油/水界面,制备水包油(O/W)型的Pickering乳液,且所得乳液具有良好的耐盐性和细胞相容性;此外该胶体粒子可稳定多种油/水体系,具有一定普适性。     

由氨解PDVB-alt-MAH纳米粒子作稳定剂的超声乳化-Pickering乳液聚合反应研究

采用以氨解的聚(二乙烯基苯-马来酸酐)交联共聚物纳米粒子(PDVB-alt-MAH nanoparticles,PDMNPs)为稳定剂、偶氮二异丁腈为引发剂、去离子水为分散介质、苯乙烯(St)为单体构成的体系,制备出聚苯乙烯(PSt)微球.利用扫描电子显微镜、激光粒度仪等仪器考察了PSt微球的形貌和粒径,分别探讨了单体乳液的稳定性、机械搅拌速率、稳定剂用量对聚合反应的影响,结果指出超声乳化和机械搅拌是必要的工艺条件,同时,发现在0.58 wt%~11.76 wt%(g/g St)的范围内增大稳定剂用量,PSt微球产物的尺寸由200 nm减小至90 nm;利用凝胶渗透色谱对聚合过程动力学进行了追踪分析;利用红外吸收光谱、X射线光电子能谱对PSt微球的化学结构进行了表征.研究结果表明,由氨解PDMNPs稳定的超声乳化-Pickering乳液聚合体系具有如下特点:(1)PDMNPs稳定效率高;(2)超声辅助的乳化设备简单;(3)所制备的球形PSt粒子表面无皂洁净、粒径分布较窄.该聚合方法用于甲基丙烯酸甲酯(MMA)、甲基丙烯酸缩水甘油酯(GMA)和α-甲基苯乙烯(AMS)等其他常见单体的聚合,结果表明,该方法对制备油溶性单体的聚合物微球具有普适性和通用性.     

含有联苯和肉桂酸酯基团的侧链液晶共聚物的合成与表征

合成了两种含有联苯刚性基元的甲基丙烯酸酯单体M1和M2,其中M1为含有可光交联的肉桂酸酯端基的单体.通过溶液自由基聚合,得到一系列含不同比例M1和M2单体单元的聚丙烯酸酯类侧链液晶共聚物.采用1H-NMR、FT-IR等方法对单体和聚合物的结构进行了详细表征.用示差扫描量热法、偏光显微镜以及广角和小角X-射线衍射对单体和聚合物的液晶性进行了研究.结果表明,末端为肉桂酸酯基团的单体M1无液晶性,其均聚物P1有微弱的液晶性,而端基为正丁基的单体M2及其均聚物P9则表现出近晶相液晶行为.共聚物P2~P5均为向列型液晶,P6~P9则为近晶型液晶.随在聚合物中M2单体含量的增加,共聚物的玻璃化转变温度、熔点及清亮点温度均呈现增加趋势.     

Surface and bulk modification of ethylene-propylene-diene terpolymer elastomer: Adhesion to polyurethane and mechanical properties

Effect of adding millable polyurethane as adhesion promoter to the ethylene-propylene-diene terpolymer as well as to the terpolymer modified by grafting of maleic anhydride on the adhesion between the terpolymer and polyurethane coating was studied. The results of peel test and water contact angle measurements showed that surface and bulk modification of terpolymer cause a significant improvement in its adhesion properties. The effect of the composition of the polymer blends on the loss tangent was studied to evaluate the extent of polymer compatibility and damping characteristics. Results demonstrated that modification of terpolymer with maleic anhydride can improve its compatibility with polyurethane, which was further confirmed by the results of the mechanical and morphological study.     

The modification and characterization of maleic anhydride-styrene-methyl metacrylate terpolymer by poly(ethylene adipate)

In this study, the functionality of maleic anhydride was utilized in the maleic anhydride-styrene-methyl metacrylate (MAStMMA) terpolymer. First, the polyester of poly(ethylene adipate), PEA, polycondensation copolymer was synthesized from ethylene glycol and adipic acid monomers. PEA was then modified on its maleic anhydride units in the MAStMMA terpolymer which has been synthesized previously. This modified copolymer was characterized by FTIR (Fourier Transform Infrared spectroscopy). The viscosimetric and thermomechanical characterization of MAStMMA terpolymer and its modified copolymer were also performed and the results were compared. The modified copolymer obtained was found to be more elastic and more soluble, and had lower viscosity and density.     

Synthesis,photo-reaction and photo-induced liquid crystal alignment of soluble polyimide with pendant cinnamate group

In this paper, the synthesis, photo-reaction and photo-induced liquid crystal alignment of a polyimide with a pendant cinnamate group are reported. The polyimide was synthesized by the thermal imidization of the polyamic acid derived from 4,4'-(hexafluoro-isopropylidene)diphthalic anhydride and hydroxydiaminopropane, followed by the attachment of the cinnamate group to the main chain polyimide. The surface of thin layers of the polyimide was found to be preferentially occupied by the pendant cinnamate groups, and liquid crystal alignment on the polyimide thin film exposed to polarized UV was independent of the cinnamate content. The thermal stability of the photo-induced liquid crystal alignment was enhanced with decrease in the cinnamate content. This could be attributed to the strong interchain interaction of the polyimide chains which prevents thermal randomization of the photo-product of the pendant cinnamates. The dependences of the photo-reaction temperature and the annealing temperature of the alignment layer on the azimuthal anchoring energy of the photo-aligned liquid crystal suggest that the local stress developed during the UV irradiation profoundly influences the thermal stability of the liquid crystal alignment.     

Synthesis, photo-reaction and photo-induced liquid crystal alignment of soluble polyimide with pendant cinnamate group

In this paper, the synthesis, photo-reaction and photo-induced liquid crystal alignment of a polyimide with a pendant cinnamate group are reported. The polyimide was synthesized by the thermal imidization of the polyamic acid derived from 4,4'-(hexafluoro-isopropylidene)diphthalic anhydride and hydroxydiaminopropane, followed by the attachment of the cinnamate group to the main chain polyimide. The surface of thin layers of the polyimide was found to be preferentially occupied by the pendant cinnamate groups, and liquid crystal alignment on the polyimide thin film exposed to polarized UV was independent of the cinnamate content. The thermal stability of the photo-induced liquid crystal alignment was enhanced with decrease in the cinnamate content. This could be attributed to the strong interchain interaction of the polyimide chains which prevents thermal randomization of the photo-product of the pendant cinnamates. The dependences of the photo-reaction temperature and the annealing temperature of the alignment layer on the azimuthal anchoring energy of the photo-aligned liquid crystal suggest that the local stress developed during the UV irradiation profoundly influences the thermal stability of the liquid crystal alignment.     

稀土配位催化马来酸酐-苯乙烯-N-苯基马来酰亚胺三元共聚合

采用稀土配位催化剂研究了马来酸酐、苯乙烯和N 苯基马来酰亚胺的三元共聚合反应 .考察了Al La物质的量的比、不同稀土元素、催化剂浓度、聚合反应时间、单体配比等因素对共聚合反应的影响 .利用核磁、红外、热分析等方法对共聚物进行了初步的表征     

Improvement in Adhesion between Ethylene–Propylene–Diene Terpolymer (EPDM)-based Elastomer and Polyurethane Coating Using Epoxy–Polysulfide Copolymer As Adhesion Promoter

Epoxy–polysulfide copolymer as an adhesion promoter was added to ethylene–propylene–diene terpolymer and the effect of maleation of terpolymer with maleic anhydride on its adhesion to polyurethane coating was studied. The results show that using epoxy-polysulfide copolymer as the adhesion promoter cause a significant improvement in adhesion of terpolymer to polyurethane coating. The contact angle of the water reduced from 88° for the unmodified terpolymer to 65° for the maleated terpolymer containing 10 phr of epoxy–polysulfide copolymer. Peel strength was also increased from 0.2 N/mm for the unmodified terpolymer to 1.12 N/mm for the above-mentioned modified elastomer. Effect of the composition of the polymer blends on the loss tangent and storage modulus was studied to evaluate phase separation and crosslink density. The improvement of adhesion to polyurethane occurred without phase separation, which was further confirmed by the results of the mechanical and morphological investigations.     

Terpolymerization of sulfur dioxide or maleic anhydride with unsaturated compounds under ultraviolet irradiation

The effect of ultraviolet irradiation on the terpolymerization was investigated. In the terpolymerizations of sulfur dioxide–butene-1–acrylonitrile, sulfur dioxide–butene-1–n-butyl acrylate, and maleic anhydride–allyl chloride–acrylonitrile systems, the composition of the terpolymers prepared under ultraviolet irradiation was different from those prepared in the dark. The unit content of sulfur dioxide and butene-1 or of maleic anhydride and allyl chloride in the terpolymer increased under ultraviolet irradiation. The nature of the growing end under ultraviolet irradiation is supposed to be the same as that of the dark polymerization on the basis of the same solvent effect on the terpolymer composition, the rate of polymerization and the molecular weight of polymer. The experimental results suggest that the complex between sulfur dioxide and butene-1 or maleic anhydride and allyl chloride might be excited by ultraviolet light and the excited complex may participate in the terpolymerization.     

Bis-(2,5-diphenylphospholanes) with sp2 carbon linkers: synthesis and application in asymmetric hydrogenation

Four chiral diphosphine ligands consisting of bis(2,5-diphenylphospholan-1-yl) groups connected by the sp(2) carbon linkers 2,3-quinoxaline ((S,S)-Ph-Quinox), 2,3-pyrazine ((S,S)-Ph-Pyrazine), maleic anhydride ((S,S)-Ph-MalPhos), and 1,1'-ferrocene ((S,S)-Ph-5-Fc) were synthesized, and their cationic [rhodium(I)(COD)] complexes were prepared. These complexes were tested in asymmetric hydrogenation of functionalized olefins. [((S,S)-Ph-Quinox)Rh(COD)]BF4 showed high activity and selectivity against itaconate and dehydroamino acid substrates. The corresponding (S,S)-Ph-Pyrazine and (S,S)-Ph-MalPhos complexes exhibited lower activities and selectivities. [((S,S)-Ph-5-Fc)Rh(COD)]BF4 showed high activity with low selectivity for these substrates, but high activity and selectivity against 2-C-substituted cinnamate salts, whereas rhodium complexes of (S,S)-Ph-Quinox and (R,R)-Ph-BPE showed low activity and selectivity against 2-C-substituted cinnamate salts.     

大分子偶联剂马来酸酐-丙烯酸丁酯-苯乙烯三元共聚物的合成及其对纳米氮化铝的表面改性

采用自由基溶液聚合法合成了马来酸酐（MAn）-丙烯酸丁酯（BA）-苯乙烯（St）三元共聚物大分子偶联剂,并用其对纳米氮化铝（AlN）粉体进行了表面改性。通过GPC、FTIR、沉降实验、TGA、接触角以及TEM的分析表明,合成的大分子偶联剂,数均相对分子量在3 000~10 000之间,适于对纳米粉体进行包覆;单体投料摩尔比为１:１:５的MAn-BA-St三元共聚物大分子偶联剂对纳米AlN的改性效果最好,其化学利用率为52.5%,物理利用率为25%;改性后纳米AlN的表面自由能从879 J/M²降至221 J/M²,在苯乙烯中分散良好。