Induced removal of dipalmitoyl phosphatidylcholine by the exclusion of fibrinogen from compressed monolayers at air/liquid interfaces

The induced removal of dipalmitoyl phosphatidylcholine (DPPC) by the exclusion of fibrinogen from mixed DPPC/fibrinogen monolayers at compressed air/liquid interfaces was analyzed. The surface pressure-area hysteresis curves of the monolayers at interfaces were obtained by a Langmuir trough. The hysteresis curves of equilibrium fibrinogen adsorption layers suggest that fibrinogen desorption during the area compression stage became significant at a higher bulk concentration of 1000 ppm. For mixed monolayers of DPPC with fibrinogen, the fibrinogen molecules were expelled from the interface upon compression due to the presence of insoluble DPPC molecules. The squeeze-out of fibrinogen molecules evidently removed a significant number of DPPC molecules from the interface, with the extent depending on fibrinogen surface concentration. During the subsequent area expansion stage, fibrinogen molecules entered the interface and participated in the rise of surface pressure. The induced loss of free DPPC molecules at the interface by the expelled fibrinogen molecules during the area compression stage was then evaluated from the hysteresis curves.     

Colloidal interactions between asphaltene surfaces in aqueous solutions

Asphaltene at oil/water interfaces plays a dominant role in the recovery of crude oil. In this study, asphaltene monolayer films were deposited on hydrophobic silicon wafers and silica spheres from oil-water interfaces using a Langmuir interfacial trough. The morphology of the deposited asphaltene films was characterized with an atomic force microscope (AFM). The colloidal forces between the prepared asphaltene films in aqueous solutions were measured with AFM to shed light on the stabilization of water or oil droplets coated with asphaltene films. Factors such as solution pH, KCl concentration, calcium addition, and temperature all showed a strong impact on colloidal forces between the prepared asphaltene films. The findings provided a better understanding of asphaltene interfacial films at an oil/water interface in stabilizing bitumen-in-water and water-in-bitumen emulsions.     

Mode of interaction of two fluorinated-hydrogenated hybrid amphiphiles with dipalmitoylphosphatidylcholine (DPPC) at the air-water interface

Two-component Langmuir monolayers formed on 0.02M Tris buffer solution (pH 7.4) with 0.13M NaCl at 298.2K were investigated for two different fluorinated-hydrogenated hybrid amphiphiles (F6PH5PPhNa and F8PH5PPhNa or F6 and F8, respectively) with DPPC. Surface pressure (pi), surface potential (DeltaV) and dipole moment (mu( perpendicular)) as a function of molecular surface area (A) were measured by employing the Whilhelmy method and an ionizing electrode method. From the A- and DeltaV-X(F6) (or X(F8)) curves, partial molecular surface area (PMA) and apparent partial molecular surface potential (APSP) were determined as a function of surface mole fraction (X(Fn)) at discrete surface pressures. Then, the behavior of occupied surface areas and surface potentials of the respective components could be made clearer. Compressibility (C(s)), elasticity (C(s)(-1)), and excess Gibbs energy (DeltaG((ex))) as a function of X(F6) (or X(F8)) were estimated at definite pressures. These physico-chemical parameters were found to reflect the mechanical strength of monolayer films formed. The regular solution theory being applied to DeltaG((ex)), the activity coefficients (f) as well as the interaction parameter (I(p)) between DPPC and two hybrid amphiphiles in the binary monolayers were evaluated. I(p) values thus obtained indicated that F8 molecules interact more strongly with DPPC molecules than F6. Moreover, in order to better understand the morphological monolayer state, Langmuir-Blodgett (LB) films made from DPPC and fluorinated-hydrogenated hybrid amphiphiles were examined by atomic force microscopy (AFM). The miscibility of the two components in the monolayer state is evidenced by these thermodynamic quantities and AFM observations. Furthermore, AFM images demonstrated that F8 could more effectively disperse the ordered domains of DPPC than F6.     

Langmuir films of flexible polymers transferred to aqueous/liquid crystal interfaces induce uniform azimuthal alignment of the liquid crystal

We reported recently that amphiphilic polymers can be assembled at interfaces created between aqueous phases and thermotropic liquid crystals (LCs) in ways that: (i) couple the organization of the polymer to the order of the LC and (ii) respond to changes in the properties of aqueous phases that can be characterized as changes in the optical appearance of the LC. This investigation sought to characterize the behavior of aqueous–LC interfaces decorated with uniaxially compressed thin films of polymers transferred by Langmuir–Schaefer (LS) transfer. Here, we report physicochemical characterization of interfaces created between aqueous phases and the thermotropic LC 4-cyano-4′-pentylbiphenyl (5CB) decorated with Langmuir films of a novel amphiphilic polymer (polymer 1), synthesized by the addition of hydrophobic and hydrophilic side chains to poly(2-vinyl-4,4′-dimethylazlactone). Initial characterization of this system resulted in the unexpected observation of uniform azimuthal alignment of 5CB after LS transfer of the polymer films to aqueous–5CB interfaces. This paper describes characterization of Langmuir films of polymer 1 hosted at aqueous–5CB interfaces as well as the results of our investigations into the origins of the uniform ordering of the LC observed upon LS transfer. Our results, when combined, support the conclusion that uniform azimuthal alignment of 5CB is the result of long-range ordering of polymer chains in the Langmuir films (in a preferred direction orthogonal to the direction of compression) that is generated during uniaxial compression of the films prior to LS transfer. Although past studies of Langmuir films of polymers at aqueous–air interfaces have demonstrated that in-plane alignment of polymer backbones can be induced by uniaxial compression, these past reports have generally made use of polymers with rigid backbones. One important outcome of this current study is thus the observation of anisotropy and long-range order in Langmuir films of a novel flexible polymer. A second important outcome is the observation that the existence, extent, and dynamics of this order can be identified and characterized optically by transfer of the Langmuir film to a thin film of LC. Additional characterization of Langmuir films of two other flexible polymers [poly(methyl methacrylate) and poly(vinyl stearate)] using this method also resulted in uniform azimuthal alignment of 5CB, suggesting that the generation of long-range order in uniaxially compressed Langmuir films of polymers may also occur more generally over a broader range of polymers with flexible backbones.     

A monolayer study on interactions of docetaxel with model lipid membranes

Docetaxel (DCT) is an antineoplastic drug for the treatment of a wide spectrum of cancers. DCT surface properties as well as miscibility studies with l-alpha-dipalmitoyl phosphatidylcholine (DPPC), which constitutes the main component of biological membranes, are comprehensively described in this contribution. Penetration studies have revealed that when DCT is injected under DPPC monolayers compressed to different surface pressures, it penetrates into the lipid monolayer promoting an increase in the surface pressure. DCT is a surface active molecule able to decrease the surface tension of water and to form insoluble films when spread on aqueous subphases. The maximum surface pressure reached after compression of a DCT Langmuir film was 13 mN/m. Miscibility of DPPC and DCT in Langmuir films has been studied by means of thermodynamic properties as well as by Brewster angle microscopy (BAM) analysis of the mixed films at the air-water interface, concluding that DPPC and DCT are miscible and they form non-ideally mixed monolayers at the air-water interface. Helmholtz energies of mixing revealed that no phase separation occurs. In addition, Helmholtz energies of mixing become more negative with decreasing areas per molecule, which suggests that the stability of the mixed monolayers increases as the monolayers become more condensed. Compressibility values together with BAM images indicate that DCT has a fluidizing effect on DPPC monolayers.     

Penetration of dissolved amphiphiles into two-dimensional aggregating lipid monolayers

The review demonstrates the recent theoretical and experimental progress in the understanding of penetration systems at the air-water interface in which a dissolved amphiphile (surfactant, protein) penetrates into a Langmuir monolayer. The critical review of the existing theoretical models which describe the thermodynamics of the penetration are critically reviewed. Although a rigorous thermodynamic analysis of penetration systems is unavailable due to their complexity, some model assumptions, e.g. the invariability of the activity coefficient of the insoluble component of the monolayer during the penetration of the soluble component results in reasonable solutions. New theoretical models describing the equilibrium behaviour of the insoluble monolayers which undergo the 2D aggregation in the monolayer, and the equations of state and adsorption isotherms which assume the existence of multiple states (conformations) of a protein molecule within the monolayer and the non-ideality of the adsorbed monolayers are now available. The theories which describe the penetration of a soluble surfactant into the main phases of Langmuir monolayers were presented first for the case of the mixture of the molecules possessing equal partial molar surfaces (the mixture of homologues), with further extension of the models to include the interesting process of the protein penetration into the monolayer of 2D aggregating phospholipid. This extension was based on a concept which subdivides the protein molecules into independent fragments with areas equal to those of the phospholipid molecule. Various mechanisms for the effect of the soluble surfactant on the aggregation of the insoluble component were considered in the theoretical models: (i) no effect on the aggregate formation process; (ii) formation of mixed aggregates; and (iii) the influence on the aggregating process via the change of aggregation constant, but without any formation of mixed aggregates. Accordingly depending on the mechanism, different forms of the equations of state of the monolayer and of the adsorption isotherms of soluble surfactant are predicted. Based on the shape of the experimental pi-A isotherms, interesting conclusions can be drawn on the real mechanism. First experimental evidence has been provided that the penetration of different proteins and surfactants into a DPPC monolayer in a fluid-like state induces a first order main phase transition of pure DPPC. The phase transition is indicated by a break point in the pi(t) penetration kinetics curves and the domain formation by BAM. Mixed aggregates of protein with phospholipid are not formed. These results agree satisfactorily with the predictions of the theoretical models. New information on phase transition and phase properties of Langmuir monolayers penetrated by soluble amphiphiles are obtained by coupling of the pi(t) penetration kinetics curves with BAM and GIXD measurements. The GIXD results on the penetration of beta-lactoglobulin into DPPC monolayers have shown that protein penetration occurs without any specific interactions with the DPPC molecules and the condensed phase consists only of DPPC.     

Influence of specific anions on the orientational ordering of thermotropic liquid crystals at aqueous interfaces

We report that specific anions (of sodium salts) added to aqueous phases at molar concentrations can trigger rapid, orientational ordering transitions in water-immiscible, thermotropic liquid crystals (LCs; e.g., nematic phase of 4'-pentyl-4-cyanobiphenyl, 5CB) contacting the aqueous phases. Anions classified as chaotropic, specifically iodide, perchlorate, and thiocyanate, cause 5CB to undergo continuous, concentration-dependent transitions from planar to homeotropic (perpendicular) orientations at LC-aqueous interfaces within 20 s of addition of the anions. In contrast, anions classified as relatively more kosmotropic in nature (fluoride, sulfate, phosphate, acetate, chloride, nitrate, bromide, and chlorate) do not perturb the LC orientation from that observed without added salts (i.e., planar orientation). Surface pressure-area isotherms of Langmuir films of 5CB supported on aqueous salt solutions reveal ion-specific effects ranking in a manner similar to the LC ordering transitions. Specifically, chaotropic salts stabilized monolayers of 5CB to higher surface pressures and areal densities (12.6 mN/m at 27 ?(2)/molecule for NaClO(4)) and thus smaller molecular tilt angles (30° from the surface normal for NaClO(4)) than kosmotropic salts (5.0 mN/m at 38 ?(2)/molecule with a corresponding tilt angle of 53° for NaCl). These results and others reported herein suggest that anion-specific interactions with 5CB monolayers lead to bulk LC ordering transitions. Support for the proposition that these ion-specific interactions involve the nitrile group was obtained by using a second LC with nitrile groups (E7; ion-specific effects similar to 5CB were observed) and a third LC with fluorine-substituted aromatic groups (TL205; weak dipole and no ion-specific effects were measured). Finally, we also establish that anion-induced orientational transitions in micrometer-thick LC films involve a change in the easy axis of the LC. Overall, these results provide new insights into ionic phenomena occurring at LC-aqueous interfaces, and reveal that the long-range ordering of LC oils can amplify ion-specific interactions at these interfaces into macroscopic ordering transitions.     

Inverse Langmuir–Schaefer films of bent-core molecules

Mesostructures in inversed Langmuir–Schaefer films of each of two contrasting bent-core molecules are explored via atomic force microscopy. One of the molecules forms Langmuir films that are optically isotropic and the other those that are optically anisotropic. Both show suboptical mesostructures in the 100 nm range, in spite of appearing optically uniform. The anisotropic films are effective in aligning nematic bent-core samples, but not rod-like liquid crystals such as 5CB.     

Dynamic ordering transitions of liquid crystals driven by interfacial complexes formed between polyanions and amphiphilic polyamines

We report the design of an amphiphilic polyamine (polymer 1) based on poly(2-alkenyl azlactone) that strongly couples the formation of polyelectrolyte complexes at aqueous/liquid crystal (LC) interfaces to ordering transitions in the LC. We demonstrate that the addition of a strong anionic polyelectrolyte to aqueous solutions in contact with polymer 1-laden LC interfaces (prepared by Langmuir-Schaefer transfer of monolayers of polymer 1 onto micrometer-thick films of nematic LC) triggers ordering transitions in the LCs. We further demonstrate that changes in the ordering of the LCs (i) are driven by electrostatic interactions between the polyelectrolytes, (ii) involve multivalent interactions between the polyelectrolytes, and (iii) are triggered by reorganization of the hydrophobic side chains of amphiphilic polymer 1 upon formation of the interfacial complexes. The results presented in this paper lead us to conclude that ordering transitions in LCs can be used to provide insights into the structure and dynamics of interfacial complexes formed between polyelectrolytes.     

Thermodynamic characteristics and Langmuir-Blodgett deposition behavior of mixed DPPA/DPPC monolayers at air/liquid interfaces

The role of dipalmitoylphosphatic acid (DPPA) as a transfer promoter to enhance the Langmuir-Blodgett (LB) deposition of a dipalmitoylphosphatidylcholine (DPPC) monolayer at air/liquid interfaces was investigated, and the effects of Ca2+ ions in the subphase were discussed. The miscibility of the two components at air/liquid interfaces was evaluated by surface pressure-area per molecule isotherms, thermodynamic analysis, and by the direct observation of Brewster angle microscopy (BAM). Multilayer LB deposition behavior of the mixed DPPA/DPPC monolayers was then studied by transferring the monolayers onto hydrophilic glass plates at a surface pressure of 30 mN/m. The results showed that the two components, DPPA and DPPC, were miscible in a monolayer on both subphases of pure water and 0.2 mM CaCl2 solution. However, an exception occurs between X(DPPA)=0.2 and 0.5 at air/CaCl2-solution interface, where a partially miscible monolayer with phase separation may occur. Negative deviations in the excess area analysis were found for the mixed monolayer system, indicating the existence of attractive interactions between DPPA and DPPC molecules in the monolayers. The monolayers were stable at the surface pressure of 30 mN/m for the following LB deposition as evaluated from the area relaxation behavior. It was found that the presence of Ca2+ ions had a stabilization effect for DPPA-rich monolayers, probably due to the association of negatively charged DPPA molecules with Ca2+ ions. Moreover, the Ca2+ ions may enhance the adhesion of DPPA polar groups to a glass surface and the interactions between DPPA polar groups in the multilayer LB film structure. As a result, Y-type multilayer LB films containing DPPC could be fabricated from the mixed DPPA/DPPC monolayers with the presence of Ca2+ ions.     

Development of a new experimental system for monitoring biomembrane reactions: combination of laser spectroscopic techniques and biomembrane models formed at an oil/water interface.

We present a new experimental system to observe reactions in biomembranes by combining laser spectroscopic techniques with phospholipid monolayers formed at oil/water interfaces. The system can monitor reactions through changes in interfacial tension at oil/water interfaces induced by the reactions under non-destructive and non-contact conditions. In addition, oil/water interfaces with defined areas can define the composition of different kinds of phospholipids. Furthermore, the system allows using, as an oil phase, alkanes whose number of carbon atoms is close to the number of the alkyl chains of phospholipids in biomembranes (C > or = 16). We demonstrated the hydrolysis reaction in DPPC (dipalmitoyl phosphatidylcholine)/DPPS (dipalmitoyl phosphatidylserine)-mixed monolayers by phospholipase A2 by using the system.     

Synthesis and Langmuir-film formation of new dendritic DTPA-derived gadolinium(III) complexes

A series of dendritic DTPA-derived ligands and their corresponding gadolinium(III) complexes have been prepared and their spreading behaviour at the air-water interface has been investigated. The results show that these amphiphiles have the prerequisite qualities to form stable and reversible Langmuir monolayers opening the road to novel magnetic organic films.     

Influence of surfactant tail branching and organization on the orientation of liquid crystals at aqueous-liquid crystal interfaces

We have examined the influence of two aspects of surfactant structure--tail branching and tail organization--on the orientational ordering (so-called anchoring) of water-immiscible, thermotropic liquid crystals in contact with aqueous surfactant solutions. First, we evaluated the influence of branches in surfactant tails on the anchoring of nematic liquid crystals at water-liquid crystal interfaces. We compared interfaces that were laden with one of three linear surfactants (sodium dodecyl sulfate, sodium dodecanesulfonate, and isomerically pure linear sodium dodecylbenzenesulfonate) to interfaces laden with branched sodium dodecylbenzenesulfonate. We carried out these experiments at 60 degrees C, above the Krafft temperatures of all the surfactants studied, and used the liquid crystal TL205 (a mixture of cyclohexane-fluorinated biphenyls and fluorinated terphenyls), which forms a nematic phase at 60 degrees C. Linear surfactants caused TL205 to assume a perpendicular orientation (homeotropic anchoring) above a threshold concentration of surfactant and parallel orientation (planar anchoring) at lower concentrations. In contrast, branched sodium dodecylbenzenesulfonate caused planar anchoring of TL205 at all concentrations up to the critical micelle concentration of the surfactant. Second, we used sodium dodecanesulfonate and a commercial linear sodium dodecylbenzenesulfonate to probe the influence of surfactant tail organization on the orientations of liquid crystals at water-liquid crystal interfaces. Commercial linear sodium dodecylbenzenesulfonate, which comprises a mixture of ortho and para isomers, has been previously characterized to form less ordered monolayers than sodium dodecanesulfonate at oil-water interfaces at room temperature. We found sodium dodecanesulfonate to cause homeotropic anchoring of both TL205 and 4'-pentyl-4-cyanobiphenyl (5CB, nematic at room temperature), whereas commercial linear sodium dodecylbenzenesulfonate caused predominantly planar and tilted orientations of both TL205 and 5CB. These results, when combined, lead us to conclude that (1) interactions between the aliphatic tails of surfactants and liquid crystals largely dictate the orientations of liquid crystals at aqueous-liquid crystal interfaces, (2) the interactions that orient the liquid crystals at these interfaces are sensitive to the branching and degree of disorder in the surfactant tails, and (3) differences in the chemical composition of TL205 and 5CB, most notably fluorination of TL205, lead to subtle differences in the orientations of these two nematic liquid crystals.     

A comparative Langmuir-Blodgett study on a set of covalently linked porphyrin-based amphiphiles: a detailed atomic force microscopic study

A set of covalently linked phenyl-amidophenyl-substituted porphyrin amphiphiles with n-C15H31 tails have been synthesized and completely characterized. These amphiphiles form good Langmuir-Blodgett (LB) films at the air/water interface. Mean molecular areas for the series were measured from the isotherms and found to increase as the number of aliphatic chains increased from one to four. No influence of the subphase pH was observed on the isotherms. LB films can be transferred successfully onto different solid surfaces. The LB films were characterized using tapping mode atomic force microscopy (AFM). Bis-, tris-, and tetra-substituted porphyrins were found to be fairly good film-forming amphiphiles, whereas irregular aggregates were seen in the case of the monosubstituted porphyrin amphiphile. Multilayers were also formed with tetra-substituted amphiphiles on mica. Detailed AFM studies of tetra-substituted amphiphiles have been carried out to investigate the effect of preparation procedure and solid substrates on film formation and transfer. The absorption and fluorescence spectra for the amphiphiles in solution and LB films deposited onto mica and glass were recorded, which demonstrated the successful transfer of LB films onto the substrates and provided more information about the arrangement of porphyrin molecules within the LB films. For comparison, self-assembled monolayers (SAMs) and the cast thin films of the amphiphiles were prepared and characterized.     

Supramolecular assemblies of a new series of gemini-type schiff base amphiphiles at the air/water interface: in situ coordination, interfacial nanoarchitectures, and spacer effect

Great interest has been devoted to the gemini amphiphiles because of their unique properties. In this article, we report some interesting properties of the interfacial films formed by a series of newly designed gemini amphiphiles containing the Schiff base moiety. This novel series of gemini amphiphiles with their Schiff base headgroups linked by a hydrophobic alkyl spacer (BisSBC18Cn, n = 2, 4, 6, 8, 10) could be spread to form stable monolayers and coordinated with Cu(Ac)(2) in situ in the monolayer. The alkyl spacer in the amphiphiles has a great effect on the regulation of the properties of the Langmuir monolayers. A maximum limiting molecular area was observed for the monolayers of the gemini amphiphile with the spacer length of hexa- or octamethylene groups. Both the monolayers on water and on the aqueous Cu(Ac)(2) subphase were transferred onto solid substrates, and different morphologies were observed for films with different spacers. Nanonail and tapelike morphologies were observed for amphiphile films with shorter spacers (n = 2 and 4) on the water surface. Wormlike morphologies were observed for gemini films with longer spacers of C(8) and C(10) when coordinated with Cu(Ac)(2). An interdigitated layer structure was supposed to form in the multilayer films transferred from water or the aqueous Cu(Ac)(2) subphase.     

维生素E与磷脂酰胆碱的单分子膜研究

测定了下列气水界面单分子膜的表面压－平均分子面积等温线：（１）ｄ－α，ｄ－β，ｄ－γ－，和ｄ－δ－生育酚等４种维生素Ｅ与ＤＰＰＣ，ＤＯＰＣ及ＤＬＰＣ的混合物，（２）ｄ－α－生育酚等摩尔比的ＤＰＰＣ和ＤＬＰＣ的混合物，（３）胆固醇与ＤＰＰＣ，ＤＬＰＣ的混合物，讨论了维生素Ｅ色满环上甲基对其在ＰＣ单分子膜中物理化作用的影响，实验结果表明：（１）维生素Ｅ以ｄ－α〉ｄ－β－≈ｄ－γ〉ｄ－δ的次序引起的ＤＰ     

Comparison of the anchoring of nematic liquid crystals on self-assembled monolayers formed from semifluorinated thiols and alkanethiols

The anchoring of nematic liquid crystals on self-assembled monolayers (SAMs) formed by the chemisorption of semifluorinated thiols or alkanethiols on gold is compared and contrasted. The planar anchoring of 4-n-pentyl-4-cyanobiphenyl (5CB) observed in the past on SAMs formed from alkanethiols is also observed on SAMs formed from semifluorinated thiols. The azimuthal anchoring of 5CB, however, differs on these two types of surfaces: nematic 5CB anchored on SAMs formed from alkanethiols has a grainy appearance due to the formation of domains with sizes 10 mum whereas 5CB forms large domains ( 100 mum) with diffuse branches emerging from defects of strength 1/2 when anchored on SAMs formed from semifluorinated thiols. Mixed (two-component) SAMs formed from either short and long semifluorinated thiols or short and long alkanethiols cause homeotropic anchoring of 5CB. We discuss these results in light of the known differences in the structure of SAMs formed from alkanethiols and semifluorinated thiols, i.e. the tilt of the chains and conformational freedom (flexibility) of the chains within these SAMs.     

Anomalous behavior of amine oxide surfactants at the air/water interface

A commonly stated requirement for the preparation of stable Langmuir monolayers of amphiphilic molecules at an air/water interface is that the surfactant must be insoluble in the subphase solution; however, a few prior studies have reported that some soluble surfactants can, under certain conditions, be compressed. The anomalous compression of soluble amphiphiles is extremely interesting and important, as it presents the possibility of greatly increasing the number of candidate compounds suitable for Langmuir monolayer studies and Langmuir-Blodgett deposition. The aim of this work was to obtain a better understanding of the factors that determine whether monolayers of a given water-soluble surfactant can be compressed. A series of amine oxide surfactants, including a novel gemini surfactant, were studied to explore the relationship between molecular structure and behavior at the air/water interface. Amine oxides are an especially interesting class of surfactants because their self-assembly in solution and at interfaces is pH-sensitive. Surface pressure-area isotherms show that the solubility of a surfactant in the subphase solution is not, in and of itself, a useful parameter in predicting whether the monolayer is compressible. Molecular modeling calculations suggest that the tendency of molecules to self-assemble plays a much more important role than solubility in this regard. The effect of pH was also investigated. We present a hypothesis that formation of dimers or small clusters of molecules at the interface inhibits the dissolution of these species into the subphase, and as a consequence the monolayer can be compressed.     

Self-patterned mixed phospholipid monolayers for the spatially selective deposition of metals

Metal-reactive organosulfur groups were patterned onto mica and silicon surfaces by dewetting instabilities during the Langmuir-Blodgett (LB) deposition of phase-separated mixed phospholipid monolayers. Monolayers were formed from binary mixtures of dipalmitoylphosphatidylcholine (DPPC), dilauroylphosphatidylcholine (DLPC), and their ω-methyldisulfide-dialkylphosphatidylcholine analogues, DSDPPC and DSDLPC. Patterns of highly parallel stripes of condensed DPPC or DSDPPC, protruding by 0.7-0.9 nm from a fluid matrix of DLPC or DSDLPC, were observed over areas extending at least 30 × 30 μm(2) in the LB films. The average stripe width varied from ca. 150 to 500 nm, depending on the lipid composition and deposition pressure. X-ray photoelectron spectroscopy confirmed that the phospholipid-monolayer-bound methydisulfides react with Au vapor to form a gold-thiolate species. The adsorption of thermally evaporated Au, Ag, and Cu onto DSDPPC/DLPC and DPPC/DSDLPC patterns was investigated by field emission gun scanning electron microscopy (FEGSEM) and atomic force microscopy (AFM). A change in phase contrast is observed in FEGSEM and AFM over the methyldisulfide-functionalized areas following metal deposition due to metal-thiolate bond formation. An increase in step height between the DSDPPC stripes and nonfunctionalized DLPC background following metal deposition, as well as the resistance of the metal-coated DSDPPC or DSDLPC regions to detergent extraction from the surface, attest to a selective metallization of the pattern. Our results indicate that the preferential adsorption of vapor-deposited metal onto the ω-methyldisulfide-terminated phase occurs at submonolayer coverages. The chemical reactivity exhibited by the organosulfur-modified phospholipid LB films make these templates potentially interesting for the fabrication of solid-supported patterns of metal nanostructures.