碱金属助剂类型及前驱物对改性NiAl复合氧化物催化分解N2O活性的影响

制备了不同Ni/Al原子比的NiAl类水滑石样品,焙烧获得NiAl复合氧化物,用于N₂O分解反应,研究了NiAl复合氧化物组成对催化活性的影响。在活性较高的NiAl复合氧化物表面浸渍碱金属碳酸盐溶液,制备改性NiAl复合氧化物,考察了碱金属类型（Na、K、Cs）和钾前驱物（K₂CO₃、K₂C₂O₄、CH₃COOK、KNO₃）对改性催化剂活性的影响。用XRD、ICP-AES、FT-IR、BET、H₂-TPR、XPS技术表征了催化剂的组成结构。结果表明,Ni/Al原子比为2.7的NiAl复合氧化物催化活性较高;Na、K、Cs碳酸盐改性NiAl复合氧化物均提高了催化剂活性,其中K的助剂效应最强。钾前驱物对K改性NiAl复合氧化物的催化活性有显著影响,其中碳酸钾、醋酸钾、草酸钾的加入明显提高了改性催化剂的催化活性,而加入硝酸钾反而降低了催化剂活性。     

A DFT study on mechanisms of CO2 coupling with propargylic alcohols using alkali carbonates

The mechanisms of CO₂ coupling with the propargylic alcohol using alkali carbonates M₂CO₃ (M = Li, Na, K, Cs) have been investigated by means of density functional theory calculations. The calculations reveal that the target product tetronic acid (TA) is yielded through two stages: (a) the formation of the α-alkylidene cyclic carbonate (αACC) intermediate via Cs₂CO₃-mediated carboxylative cyclization of the propargylic alcohol with CO₂, and (b) the conversion of the αACC intermediate with Cs₂CO₃ to produce the cesium salt of the TA. Since the overall kinetic barriers for the two stages are comparable and affordable, the excellent chemoselectivity to the TA should be primarily originated from the high thermodynamic stability of the cesium salt of the TA. Moreover, relative to the TA, the possibility to yield the by-product acyclic carbonate can be excluded due to the both kinetics and thermodynamic inferiority. This result is different from the organic base-mediated reaction. Alternatively, our calculations predict that CsHCO₃ together generated with the cesium salt of the TA might also be an available mediating reagent for the incorporation of CO₂ with the propargylic alcohol. Compared to other alkali carbonates M₂CO₃ (M = Li, Na, K), the stronger basicity of Cs₂CO₃ and the lower ionic potential of cesium ion can raise the effective concentration of the αACC intermediate, and thus the conversion of the αACC intermediate into the cesium salt of the TA can be achieved with high yield.     

From simple rings to one-dimensional channels with calix[8]arenes, water clusters, and alkali metal ions

The macrocycle 4-tert-butylcalix[8]arene (L) was reacted with alkali metal carbonates (Li₂CO₃, Na₂CO₃, K₂CO₃, Rb₂CO₃, and Cs₂CO₃) at the interface of a biphasic THF/water system. Needle-like crystals with a general formula [A_x(4-tert-butylcalix[8]arene-xH)(THF)_y(H₂O)_z] (with A=Li, Na, K, Rb, Cs, x=1, 2, y=4, 5, 8, and z=6, 7) were thereby obtained. The solid state structures were investigated by X-ray diffraction of single crystals and by TGA measurements. They do not appear to be maintained in solution.     

Degree of hydration in cement paste and C<Subscript>3</Subscript>A-sodium carbonate-water systems

This research provides a fundamental understanding of the early stage hydration of Portland cement paste, tricalcium aluminate (C₃A) paste at water to cement ratio of 0.5 and C₃A suspension at water to cement ratio of 5.0 modified by 2 or 4 mass% of sodium carbonate. A high conversion of unreacted clinker minerals to gel-like hydration products in the cement-Na₂CO₃ pastes takes place rapidly between 1^st to 24^th h. Contrary the Ca(OH)₂ formation within the same time interval is retarded in the excess of CO₃²⁻ ions due to intensive rise and growth of CaCO₃ crystals in hydrated cement. Later, the conversion of clinker minerals to the hydrate phase is reduced and higher contents of calcite and vaterite relative to that of Ca(OH)₂ in comparison with those found in the Portland cement paste are observed. As a consequence a decrease in strength and an increase in porosity between hardened Portland cement paste without sodium carbonate and those modified by Na₂CO₃ are observed. C₃A hydrates very quickly with sodium carbonate between 1^st and 24^th h forming hydration products rich in bound water and characterized also by complex salts of (x)C₃A·(y)CO₂·(zH₂O type, whereas C₃A-H₂O system offers C₃AH₆ as the main hydration product. Higher content of the formed calcium aluminate hydrates in C₃A-Na₂CO₃-H₂O system also contributes to early strength increase of Portland cement paste.     

[Cs(NTO)(H2O)]配合物的合成及表征

本文首次用碳酸铯与NTO直接合成新的Cs-NTO配合物.采用元素分析和化学分析法确定了配合物的组成.用红外光谱法,热分析法和X-ray粉末衍射法进行了物理化学表征.     

Hochdrucksynthesen einiger Carbonate mit überkritischem CO2

Syntheses of Some Carbonates with CO₂ under High Pressures Carbonates of the alkali metals and of some transition metals are prepared from their solutions, hydroxides, or oxides by reactions with CO₂ using pressures of 600–4500 at and temperatures of 100– 400°C. The carbonates MnCO₃, FeCO₃, CoCO₃, NiCO₃, ZrCO₃ · 2H₂O, Th(CO₃)₂ · 0.5 H₂O and the carbonates of the alkali metals are characterized by infrared spectroscopy and X-ray investigations. The structures of Rb₂CO₃ (1) and Cs₂CO₃ (2) are presented. They are both monoclinic, space group P 2_1/c (No. 14) with a = 5.87 (1), 6.13 (2); b = 10.13 (1), 10.28 (2); c = 7.33 (1), 8.15 Å (2), β = 97.65° (1), 95.85° (2) and Z = 4.     

Synthesis and adsorption investigations of zeolites MCM-22 and MCM-49 modified by alkali metal cations

Ion exchange was made on MCM-22 and MCM-49 zeolites with different Si/Al molar ratios, with Li⁺, Na⁺, K⁺, and Cs⁺ ions and the study of the influence of alkali metal cations on CO₂ adsorption properties was performed. The degree of ion-exchange decreased for larger cations (Cs⁺) apparently due to steric hindrances. The exchange with different cations led to a decrease in the surface area and the micropore volume. Our study shows that the adsorption capacity of the tested zeolites depends significantly on the nature and the concentration of the charge-compensating cations. The highest CO₂ adsorption capacity was obtained on the MWW zeolites with the lowest Si/Al molar ratio and the Li⁺ or K⁺ cations.     

Optical spectroscopy of europium 3,5-dinitrosalicylates—Intense red luminophores

It was found, that alkali metal-europium dinitrosalicylates of composition M₃Eu(3,5-NO₂-Sal)₃·nH₂O (M = Li, Na, K, Cs) are intense red luminophores with wide excitation band. Using methods of optical spectroscopy we studied the influence of nitrogroups and alkali metal counterions on Eu³⁺ luminescence efficiency and on processes of excitation energy transfer to Eu³⁺ ion in compounds synthesized. The Eu³⁺ luminescence and Eu³⁺ luminescence excitation spectra, as well as vibrational IR and Raman spectra were investigated. Details of the structure of compounds were discussed. The network of hydrogen bonds in lanthanide dinitrosalicylates is weakening at introduction of large alkali metal ions in compounds and at the increase of the temperature. As a consequence, the long-wavelength shift of the intraligand charge transfer (ILCT) band in Eu³⁺ excitation spectra arises at inclusion of Cs⁺ cations instead of Li⁺ in the crystal lattice of europium dinitrosalicylates and at heating of these compounds. To obtain the energy of the lowest excited triplet state the phosphorescence spectra of alkali metal-gadolinium compounds M₃Gd(3,5-NO₂-Sal)₃·nH₂O, of alkali metal dinitrosalicylate and salicylate salts were measured with time delay. Change of the energies of ligand electronic states and ligand–metal charge transfer state (LM CTS) can give a two-three orders of magnitude enhancement of the Eu³⁺ luminescence efficiency in dinitrosalicylates in comparison with salicylates and ten-fold enhancement at the substitution of Li⁺ and Na⁺ for Cs⁺ in dinitrosalicylates.     

Ternary molybdenum(III) chlorides

The phase diagrams of ACl/MoCl₃ (A=Na, K, Rb, Cs) were elucidated by DTA measurements in sealed quartz ampoules in the range of 0–40 mol% MoCl₃. The samples were prepared from alkali metal chlorides and the compounds A₃MoCl₆ or A₃Mo₂Cl₉. The 31 compounds withA=Na, Rb, Cs were obtained by sintering mixtures of 3ACl+MoCl₃; the enneachlorides A₃Mo₂Cl₉ withA=K, Rb, Cs were precipitated from solutions of MoCl₃·3H₂O and ACl in formic acid. Congruently melting compounds A₃MoCl₆ exist in all four systems, incongruently melting enneachlorides A₃Mo₂Cl₉ in systems withA=K, Rb, Cs. Still unknown structures were determined by analog-indexing powder patterns according to known structure families. Especially Cs₃MoCl₆ is isotypic with the recently found Cs₃CrCl₆ structure. Additionally, the unit cell parameters were determined for the compounds A₃MoCl₅·H₂O (A=K, Rb, Cs) analogous to Cs₂TiCl₅·H₂O, whose structure was determined by single crystal measurements.Dedicated to Prof. Menachem Steinberg on the occasion of his 65th birthday     

Characterization of some new alkali metal molybdate hydrates by thermal and X-ray methods

Preparation and characterization of four new hydrated alkali metal molybdates Na₂Mo₄O₁₃·6H₂O, K₂Mo₄O₁₃·3H₂O, Rb₂Mo₄O₁₃·2H₂O and Cs₂Mo₄O₁₃·2H₂O are described. The compounds were prepared by crystallizing the solution obtained by dissolving MoO₃ and corresponding alkali metal carbonates A₂CO₃ or molybdate A₂MoO₄ in stoichiometric amount in distilled water. The hydrated molybdates were characterized by thermal (TG/DTA) and X-ray diffraction (XRD) methods. The number of water molecules in the compounds were determined from their TG /DTA curves recorded in air and identification of their dehydration products was done by XRD. The cell parameters of the compounds were obtained by indexing their XRD patterns. Attempt to prepare the corresponding hydrated compound of lithium was not successful. This revised version was published online in July 2006 with corrections to the Cover Date.     

Polysulfonylamine. CLXIII [1] Kristallstrukturen von Metall‐di(methansulfonyl)amiden. 12 [1] Das orthorhombische Doppelsalz Na2Cs2[(CH3SO2)2N]4·3H2O: Ein dreidimensionales Koordinationspolymer aus (Caesium‐Anion‐Wasser)‐Schichten und intercalierten Natriumionen

Polysulfonylamines. CLXIII. Crystal Structures of Metal Di(methanesulfonyl)amides. 12. The Orthorhombic Double Salt Na₂Cs₂[(CH₃SO₂)₂N]₄·3H₂O: A Three‐Dimensional Coordination Polymer Built up from Cesium‐Anion‐Water Layers and Intercalated Sodium Ions The packing arrangement of the three‐dimensional coordination polymer Na₂Cs₂[(MeSO₂)₂N]₄·3H₂O (orthorhombic, space group Pna2₁, Z′ = 1) is in some respects similar to that of the previously reported sodium‐potassium double salt Na₂K₂[(MeSO₂)₂N]₄·4H₂O (tetragonal, P4₃2₁2, Z′ = 1/2). In the present structure, four multidentately coordinating independent anions, three independent aquo ligands and two types of cesium cation form monolayer substructures that are associated in pairs to form double layers via a Cs(1)—H₂O—Cs(2) motif, thus conferring upon each Cs⁺ an irregular O₈N₂ environment drawn from two N, O‐chelating anions, two O, O‐chelating anions and two water molecules. Half of the sodium ions occupy pseudo‐inversion centres situated between the double layers and have an octahedral O₆ coordination built up from four anions and two water molecules, whereas the remaining Na⁺ are intercalated within the double layers in a square‐pyramidal and pseudo‐C₂ symmetric O₅ environment provided by four anions and the water molecule of the Cs—H₂O—Cs motif. The net effect is that each of the four independent anions forms bonds to two Cs⁺ and two Na⁺, two independent water molecules are involved in Cs—H₂O—Na motifs, and the third water molecule acts as a μ₃‐bridging ligand for two Cs⁺ and one Na⁺. The crystal cohesion is reinforced by a three‐dimensional network of conventional O—H···O=S and weak C—H···O=S/N hydrogen bonds.     

Mechanochemical interaction of alkali metal metasilicates with carbon dioxide: 1. Absorption of CO<Subscript>2</Subscript> and phase formation

Processes proceeding during the mechanochemical activation of alkali metal metasilicates M₂SiO₃ (where M is Li, Na, K) are studied in the air and in an atmosphere of carbon dioxide. At the initial stage of activation in a centrifugal planetary mill in an atmosphere of carbon dioxide, the main portion of supplied mechanical energy is expended for grinding and the mechanosorption of CO₂ occurs in the regime of cleavage, i.e., on the freshly formed surfaces of particles. As the time of activation increases, the specific surface area becomes constant, which, however, does not substantially affect the rate of interaction between carbon dioxide and silicates. The absorption of CO₂ occurs in the regime of friction on the active sites of already formed surfaces and is accompanied by the tribodiffusion of gas molecules into structurally disordered layers of particles. With identical amounts of supplied energy, the CO₂/M₂SiO₃ molar ratio in the samples activated in the medium of carbon dioxide increases in the Li < Na < K series. The main product of mechanically induced interactions between Li₂SiO₃ and CO₂ is the X-ray amorphous carbonate-silicate phase. In the case of sodium and potassium metasilicates, the reaction of mechanochemical substitution occurs to form corresponding carbonates, hydrocarbonates, and amorphous silica. It is shown that the character of mechanochemical interaction between M₂SiO₃ and CO₂ depends on the change in the Gibbs energy of the transformation of silicate into corresponding carbonate, as well as on the melting temperature and the hygroscopicity of silicate.     

DVM Xα calculations on the electronic structure of “superalkali” cations

The electronic structure of the radicals Li₂F, Li₃O, Li₄N, Li₂Cl, Li₃S, Li₄P, Na₂F, Na₃O, Na₄P, Na₂Cl, Na₃S, Na₄P, Cs₂F, Cs₂Cl and NH₄ were calculated by the discrete variational Xα method. In all cases the electron affinity of the cation is less than that of the ligand alkali cations, thus giving rise to the name “superalkali”.     

Ion-molecular Crystals as Inclusion Compounds: Van der Waals Contacts in Ionic Carbonates

Among Cambridge substances, which always include “organic”carbon, i.e., carbon contained in molecules or molecular ions,ion-molecular crystals (particularly, carbonates or alkaline-earthand alkaline metals) are of special interest. Some of such carbonatescontain pronounced Van der Waals (vdw) contacts between oxygenatoms of carbonate groups. Thus, agglomerates (layers or columns)formed by contacting carbonate groups arise (columns beingconnected in a frame), and in the cavities between these agglomeratescations are situated. The structure looks like an inclusion compound,the carbonate groups being hosts and the cations being guests. Todiscuss this question we used the refined value of vdw radius of oxygenwhich was obtained by statistical treatment of 8200 crystal structuresfrom Cambridge Structural Database (CSD) and is equal to 1.53 Å for the O?O contacts. Hence the length of a normal supporting vdw contact O?O is 3.06 ± 0.15 Å. Such contacts are present in MgCO₃ and CaCO₃ (calcite) and in α-Na₂CO₃. There are contacts O?O that are even shorter (2.74–2.81 Å)in CaCO₃ (aragonite), SrCO₃, BaCO₃ and Li₂CO₃.So it is possible to suppose the existence of specific (partly covalent)contacts O?O in these substances. In β-Na₂CO₃, all forms of K₂CO₃, Rb₂CO₃ and Cs₂CO3 the vdw contacts of CO₃ groups are absent; therefore they are ionic (not inclusion) compounds.     

Electronics structures of Rb,Cs and some of their metallic oxides studied by photoelectron spectroscopy

Photoemission measurements with He and Ne resonance lines and Al Kα radiation are reported on bulk samples of the alkali metals Rb, Cs, their suboxides Cs₇O, Cs₁₁O₃ and (Cs₁₁O₃)Rb₇. For comparison, the Hel spectrum of the “normal” oxide Cs₂O is added. The occurrence of ionic clusters in a metallic matrix is typical for the suboxides. Binding energies, Auger transitions, and electron concentrations are discussed. The spectra of the suboxides show a narrow non-bonding oxygen 2p band at 2.7 eV. Different binding energies are found for Cs atoms in the clusters and for the atoms in the metallic regions of (Cs₁₁O₃)Cs₁₀. The compound Cs₁₁O₃ consists of ionic [Cs₁₁O₃]^5? clusters, which are bound by 5 free electrons in accordance with the chemical bond model.     

不同碱处理制备多级孔HZSM-5催化剂及噻吩烷基化性能研究

用Na₂CO₃、TPAOH和TPA⁺/CO₃^2-混合碱分别处理HZSM-5分子筛,采用FT-IR、XRD、XRF、N₂吸附脱附、SEM、NH₃-TPD及Py-FTIR表征手段对各类碱处理前后的HZSM-5分子筛进行表征。结果表明,3种类型的碱处理HZSM-5分子筛后,均能形成微孔-介孔多级孔道的HZSM-5(A)催化剂,并能调变催化剂的酸性,其中,TPA⁺/CO₃^2-混合碱处理得到的HZSM-5(TPA⁺/CO₃^2-)催化剂,比表面积最大,介孔数量最多。在小型固定床反应器上,考察了HZSM-5和HZSM-5(A)催化剂的噻吩烷基化性能,结果表明,HZSM-5(TPA⁺/CO₃^2-)催化剂因为具有适当的多级孔孔道和较多的B酸中心而表现出较高的噻吩转化率和1-己烯对噻吩的选择性。     

Preparation of <Emphasis Type="Italic">α</Emphasis>-methyl-<Emphasis Type="Italic">γ</Emphasis>-butyrolactone: Mechanism of its formation and utilization in 2-methyl-1-tetralone synthesis

α-Methyl-γ-butyrolactone (III) has been prepared directly from γ-butyrolactone (I) in 89 % yield by selective monomethylation conditions: K₂CO₃/DMC/210°C/7 h. The reaction mechanism was elucidated and described. An intermediate and two byproducts: methyl tetrahydro-3-methyl-2-oxofuran-3-carboxylate (II), 3-(methoxycarbonyl)propyl methyl carbonate (IV) and 3-(methoxycarbonyl)butyl methyl carbonate (V) were identified. The high temperature disproportionation of K₂CO₃ in the presence of dimethyl carbonate to MeOK was observed. The new selective synthesis of 2-methyl-1-tetralone (VI) from α-methyl-γ-butyrolactone (III) by Friedel-Crafts conditions was performed in 79 % yield.     

Simultaneous IR/TG study of calcium carbonate in two aged cement pastes

Two aged cement pastes (7 years) were studied for H₂O and CO₂ evolution, the combined amounts of which were measured by TG and identified by thermo-IR analysis. This indicated the presence of three forms of carbonates, which decomposed at different temperatures. The displacement with time of the evaporation of sorbed water to higher temperatures (500–700°C, TG, MS) shows the possibility of its incorporation into carbonate hydrates and/or hydroxy hydrates, postulated previously. The decomposition of all the hydration products needed a thermal energy increasing with ageing (increased temperature measured by TG). The carbonation process proceeded for 7 years in the weaker paste, whereas it terminated before 5 years in the stronger one. The CSH water content did not change with ageing, whereas that of portlandite was lowered, which though did not account for the increase in carbonate content (TG). Possibly some Ca²⁺ from the CSH gel was involved in this process. In the stronger paste the growth with time of organic matter was found (IR, TG/DTG).     

Organic surface coating on Coccolithophores - Emiliania huxleyi: Its determination and implication in the marine carbon cycle

Most of the marine precipitation of CaCO₃ is due to the biological activities of planktonic and benthic organisms in waters largely oversaturated with respect to calcium carbonates. This saturation state is expected to decrease as CO₂ increases in seawater. A conventional view in oceanography suggests that calcium carbonates organisms are preserved in oversaturated waters and dissolve only below the lysocline. However, it has be postulated that a fraction of the CaCO₃ precipitated biogenically could dissolve in oversaturated waters due to the formation of microenvironments in which respired CO₂ decreases the saturation state of seawater (Ω) in the vicinity of CaCO₃ crystals. In the present study, cells of the coccolithophore Emiliania huxleyi obtained from laboratory cultures and field samples collected in the Gulf of Biscay, were examined using “variable-energy” electron-probe microanalysis, to determine the presence and thickness of their organic coating. In addition, a new approach for transferring micrometer-sized particles from a filter onto transmission electron microscope grids using manipulators was used to investigate individual coccolithophores. The dry thickness of an organic coating over the coccolithophore surface was found to range between 280 and 350 nm. The resemblance of this coating to the carbohydrates produced and released by the cell is discussed as well as their potential for constituting a microenvironment that hosts bacteria. The properties of this organic coating and its role in the preservation/dissolution and export of biogenic carbonates in the water column are one of the major issues of carbonate geochemistry.     

Influence of ion-exchange and impregnation modification of zeolite X on its catalytic properties in the alkylation of toluene with methanol

The dependence of the activity and selectivity of ion-exchanged forms of zeolite X with incorporated cesium process in alkylation of toluene with methanol in the side chain on the nature of the ion-exchanged cations (Na⁺, Cs⁺, Mg²⁺, Zn²⁺) has been established. It is shown that introduction of Mg²⁺ and Zn²⁺ in combination with Cs₂CO₃ significantly increased the yields of ethylbenzene and styrene in comparison with their yields on alkali forms of zeolite X. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 1, pp. 33–38, January–February, 2006.