Three-coordinate NiII: tracing the origin of an unusual, facile Si-C(sp3) bond cleavage in [(tBu2PCH2SiMe2)2N]Ni+

All attempts to synthesize (PNP)Ni(OTf) form instead ((t)Bu(2)PCH(2)SiMe(2)NSiMe(2)OTf)Ni(CH(2)P(t)Bu(2)). Abstraction of F(-) from (PNP)NiF by even a catalytic amount of BF(3) causes rearrangement of the (transient) (PNP)Ni(+) to analogous ring-opened [((t)Bu(2)PCH(2)SiMe(2)NSiMe(2)F)]Ni(CH(2)P(t)Bu(2)). Abstraction of Cl(-) from (PNP)NiCl with NaB(C(6)H(3)(CF(3))(2))(4) in CH(2)Cl(2) or C(6)H(5)F gives (PNP)NiB(C(6)H(3)(CF(3))(2))(4), the key intermediate in these reactions is (PNP)Ni(+), [(PNP)Ni](+), in which one Si-C bond (together with N and two P) donates to Ni. This makes this Si-C bond subject to nucleophilic attack by F(-), triflate, and alkoxide/ether (from THF). This σ(Si-C) complex binds CO in the time of mixing and also binds chloride, both at nickel. Evidence is offered of a "self-healing" process, where the broken Si-C bond can be reformed in an equilibrium process. (PNP)Ni(+) reacts rapidly with H(2) to give (PN(H)P)NiH(+), which can be deprotonated to form (PNP)NiH. A variety of nucleophilic attacks (and THF polymerization) on the coordinated Si-C bond are envisioned to occur perpendicular to the Si-C bond, based on the character of the LUMO of (PNP)Ni(+).     

Untethered 4,1,2-MC(2)B(10) supraicosahedral metallacarboranes, their C,C'-dimethyl 4,1,6-, 4,1,8- and 4,1,12-MC(2)B(10) analogues, and DFT study of the (4,)1,2- to (4,)1,6-isomerisations of C(2)B(11) carboranes and MC(2)B(10) metallacarboranes

Reduction of the tethered carborane 1,2-μ-(CH(2)SiMe(2)CH(2))-1,2-closo-C(2)B(10)H(10) followed by metallation with {CpCo} or {(p-cymene)Ru} fragments affords both C,C'-dimethyl 4,1,2-MC(2)B(10) and 4,1,6-MC(2)B(10) species. DFT calculations indicate that the barriers to isomerisation of both 4-Cp-4,1,2-closo-CoC(2)B(10)H(12) and 4-(η-C(6)H(6))-4,1,2-closo-RuC(2)B(10)H(12) to their respective 4,1,6-isomers are too high for this to be the origin of the unexpected formation of 4,1,6-MC(2)B(10) products (in marked contrast to the related isomerisation of 1,2-closo-C(2)B(11)H(13) to 1,6-closo-C(2)B(11)H(13)), and, indeed, the 4,1,2-species are recovered unchanged from refluxing toluene. Equally, the DFT-calculated profile for the isomerisation of [7,8-nido-C(2)B(10)H(12)](2-) to [7,9-nido-C(2)B(10)H(12)](2-) suggests that the unexpected formation of 4,1,6-metallacarboranes is unlikely to result from isomerisation of a reduced (nido) carborane following desilylation. Instead, the source of the 4,1,6-MC(2)B(10) compounds is traced to desilylation of 1,2-μ-(CH(2)SiMe(2)CH(2))-1,2-closo-C(2)B(10)H(10) by Li or Na prior to reduction. The supraicosahedral metallacarboranes 1,8-Me(2)-4-Cp-4,1,8-closo-CoC(2)B(10)H(10), 1,12-Me(2)-4-Cp-4,1,12-closo-CoC(2)B(10)H(10) and 1,12-Me(2)-4-(p-cymene)-4,1,12-closo-RuC(2)B(10)H(10) are also reported with all new species characterised both spectroscopically and crystallographically.     

Synthesis, structure, and reactivity of a mononuclear organozinc hydride complex: facile insertion of CO2 into a Zn-H Bond and CO2-promoted displacement of siloxide ligands

Tris(2-pyridylthio)methane, [Tptm]H, has been employed to synthesize the mononuclear alkyl zinc hydride complex, [κ(3)-Tptm]ZnH, which has been structurally characterized by X-ray diffraction. [κ(3)-Tptm]ZnH provides access to a variety of other [Tptm]ZnX derivatives. For example, [κ(3)-Tptm]ZnH reacts with (i) R(3)SiOH (R = Me, Ph) to give [κ(4)-Tptm]ZnOSiR(3), (ii) Me(3)SiX (X = Cl, Br, I) to give [κ(4)-Tptm]ZnX, and (iii) CO(2) to give the formate complex, [κ(4)-Tptm]ZnO(2)CH. The bis(trimethylsilyl)amide complex [κ(3)-Tptm]ZnN(SiMe(3))(2) also reacts with CO(2), but the product obtained is the isocyanate complex, [κ(4)-Tptm]ZnNCO. The formation of [κ(4)-Tptm]ZnNCO is proposed to involve initial insertion of CO(2) into the Zn-N(SiMe(3))(2) bond, followed by migration of a trimethylsilyl group from nitrogen to oxygen to generate [κ(4)-Tptm]ZnOSiMe(3) and Me(3)SiNCO, which subsequently undergo CO(2)-promoted metathesis to give [κ(4)-Tptm]ZnNCO and (Me(3)SiO)(2)CO.     

Electronic structure of iron chlorins: characterization of bis(l-valine methyl ester)(meso-tetraphenylchlorin)iron(III)triflate and bis(l-valine methyl ester)(meso-tetraphenylchlorin)iron(II)

The synthesis and characterization of the two iron chlorin complexes [Fe(III)(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) and Fe(II)(TPC)[(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2))](2) (2) are reported. The crystal structure of complex 1 has been determined. The X-ray structure shows that the porphyrinate rings are weakly distorted. The metal-nitrogen distances to the reduced pyrrole N(4), 2.034(4) A, and to the pyrrole trans to it N(2), 2.012(4) A, are longer than the distances to the two remaining nitrogens [N(1), 1.996(4) A, and N(3), 1.984(4) A], leading to a core-hole expansion of the macrocycle due to the reduced pyrrole. The (1)H NMR isotropic shifts at 20 degrees C of the different pyrrole protons of 1 varied from -0.8 to -48.3 ppm according to bis-ligated complexes of low-spin ferric chlorins. The EPR spectrum of [Fe(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) in solution is rhombic and gives the principal g values g(1) = 2.70, g(2) = 2.33, and g(3) = 1.61 (Sigmag(2) = 15.3). These spectroscopic observations are indicative of a metal-based electron in the d(pi) orbital for the [Fe(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) complex with a (d(xy))(2)(d(xz)d(yz))(3) ground state at any temperature. The X-ray structure of the ferrous complex 2 also shows that the porphyrinate rings are weakly distorted. The metal-nitrogen distances to the reduced pyrrole N(4), 1.991(5) A, and to the pyrrole trans to it N(2), 2.005(6) A, are slightly different from the distances to the two remaining nitrogens [N(1), 1.988(5) A, and N(3), 2.015(5) A], leading to a core-hole expansion of the macrocycle due to the reduced pyrrole.     

Cobalt-mediated selective B-H activation and formation of a Co-B bond in the reaction of the 16-electron CpCo half-sandwich complex containing an o-carborane-1,2-dithiolate ligand with ethyl diazoacetate

The reaction of the 16-electron half-sandwich complex CpCo(S(2)C(2)B(10)H(10)) (1; Cp = cyclopentadienyl) with ethyl diazoacetate (EDA) at ambient temperature leads to compounds CpCo(S(2)C(2)B(10)H(10))(CHCO(2)Et) (2), CpCo(S(2)C(2)B(10)H(8))(CHCO(2)Et)(CH(2)CO(2)Et)[CH(CO(2)Et)(CH(2)CO(2)Et)] (3), CpCo(S(2)C(2)B(10)H(9))(CH(2)CO(2)Et)(CHCO(2)Et)(2) (4), CpCo(S(2)C(2)B(10)H(9))(CHCO(2)Et)(CH(2)CO(2)Et) (5), and CpCo(S(2)C(2)B(10)H(9))(CHCO(2)Et)(2)(CH(2)CO(2)Et) (6). In 2, the EDA molecule has been inserted into one Co-S bond in 1 with the loss of N(2) to form an 18-electron compound containing a three-membered metallacyclic ring. In 3, two B-H bonds of the carborane cage have been activated and the unusual B4-H bond activation leads to the formation of a stable Co-B bond. Two EDA molecules are inserted into the Co-B3 bond to generate an unexpected six-membered heterocyclic ring Co-B-B-C-C-O. In 4, a stable Co-B bond is present as well but in the position B3/B6, and two EDA molecules are inserted into one Co-S bond to produce a five-membered heterocyclic ring Co-C-C-C-O. In 5, one EDA is inserted into the Co-B bond with the formation of a C-B bond in the position B3/B6. One more EDA is inserted into the Co-S bond in 5 to generate 6. Upon heating, 6 loses the BH vertex close to the two carbon atoms to lead to CpCo(S(2)C(2)B(9)H(9))(CHCO(2)Et)(CH(2)CO(2)Et)(2) (7) containing a nido-C(2)B(9) unit. All of the new compounds 2-7 were characterized by NMR spectroscopy ((1)H, (11)B, and (13)C), mass spectrometry, IR spectroscopy, and elemental analysis, and their solid-state structures were further characterized by X-ray structural analysis.     

Atmospheric chemistry of 4:2 fluorotelomer alcohol (n-C4F9CH2CH2OH): products and mechanism of Cl atom initiated oxidation in the presence of NOx

Smog chamber/FTIR techniques were used to study the Cl atom initiated oxidation of 4:2 fluorotelomer alcohol (C(4)F(9)CH(2)CH(2)OH, 4:2 FTOH) in the presence of NO(x) in 700 Torr of N(2)/O(2) diluent at 296 K. Chemical activation effects play an important role in the atmospheric chemistry of the peroxy, and possibly the alkoxy, radicals derived from 4:2 FTOH. Cl atoms react with C(4)F(9)CH(2)CH(2)OH to give C(4)F(9)CH(2)C(*)HOH radicals which add O(2) to give chemically activated alpha-hydroxyperoxy radicals, [C(4)F(9)CH(2)C(OO(*))HOH]*. In 700 Torr of N(2)/O(2) at 296 K, approximately 50% of the [C(4)F(9)CH(2)C(OO(*))HOH]* radicals decompose "promptly" to give HO(2) radicals and C(4)F(9)CH(2)CHO, the remaining [C(4)F(9)CH(2)C(OO(*))HOH]* radicals undergo collisional deactivation to give thermalized peroxy radicals, C(4)F(9)CH(2)C(OO(*))HOH. Decomposition to HO(2) and C(4)F(9)CH(2)CHO is the dominant atmospheric fate of the thermalized peroxy radicals. In the presence of excess NO, the thermalized peroxy radicals react to give C(4)F(9)CH(2)C(O(*))HOH radicals which then decompose at a rate >2.5 x 10(6) s(-1) to give HC(O)OH and the alkyl radical C(4)F(9)CH(2)(*). The primary products of 4:2 FTOH oxidation in the presence of excess NO(x) are C(4)F(9)CH(2)CHO, C(4)F(9)CHO, and HCOOH. Secondary products include C(4)F(9)CH(2)C(O)O(2)NO(2), C(4)F(9)C(O)O(2)NO(2), and COF(2). In contrast to experiments conducted in the absence of NO(x), there was no evidence (<2% yield) for the formation of the perfluorinated acid C(4)F(9)C(O)OH. The results are discussed with regard to the atmospheric chemistry of fluorotelomer alcohols.     

Two- and three-dimensional silver(I)-organic networks generated from mono- and dicarboxylphenylethynes

Three phenylethynes bearing methyl carboxylate (HL1), monocarboxylate (H(2)L2), and dicarboxylate (H(2)L3) groups were utilized as ligands to synthesize a new class of organometallic silver(I)-ethynide complexes as bifunctional building units to assemble silver(I)-organic networks. X-ray crystallographic studies revealed that in [Ag(2)(L1)(2)·AgNO(3)](∞) (1) (L1= 4-C(2)C(6)H(4)CO(2)CH(3)), one ethynide group interacts with three silver ions to form a complex unit. These units aggregate by sharing silver ions with the other three units to afford a silver column, which are further linked through argentophilic interaction to generate a two-demensional (2D) silver(I) network. In [Ag(2)(L2)·3AgNO(3)·H(2)O](∞) (2) (L2 = 4-CO(2)C(6)H(4)C(2)), the ethynide group coordinates to four silver ions to form a building unit (Ag(4)C(2)C(6)H(4)CO(2)), which interacts through silver(I)-carboxylate coordination bonds to generate a wave-like 2D network and is subsequently connected by nitrate anions as bridging ligands to afford a three-demensional (3D) network. In [Ag(3)(L3)·AgNO(3)](∞) (3) (L3 = 3,5-(CO(2))(2)C(6)H(3)C(2)), the building unit (Ag(4)C(2)C(6)H(3)(CO(2))(2)) aggregates to form a dimer [Ag(8)(L3)(2)] through argentophilic interaction. The dimeric units interact through silver(I)-carboxylate coordination bonds to directly generate a 3D network. The obtained results showed that as a building unit, silver(I)-ethynide complexes bearing carboxylate groups exhibit diverse binding modes, and an increase in the number of carboxylate groups in the silver(I)-ethynide complex unit leads to higher level architectures. In the solid state, all of the complexes (1, 2, and 3) are photoluminescent at room temperature.     

Stereospecificity of acetylene reduction catalyzed by nitrogenase.

In addition to catalyzing the reduction of dinitrogen to ammonia, the metalloenzyme nitrogenase catalyzes the reduction of a number of alternative substrates, including acetylene (C(2)H(2)) to ethylene (C(2)H(4)) and, in certain cases, to ethane (C(2)H(6)). The stereochemistry of proton addition for C(2)D(2) reduction to C(2)D(2)H(2) catalyzed by the Mo-dependent nitrogenase has been used to probe substrate binding and proton addition mechanisms. In the present work, the C(2)D(2) reduction stereospecificity of altered MoFe proteins having amino acid substitutions within the active site FeMo-cofactor environment was examined by Fourier transform infrared (FTIR) spectroscopy. Altered MoFe proteins examined included those having the alpha-subunit 96(Arg) residue substituted by Gln, Leu, or Ala, the alpha-subunit 69(Gly) residue substituted by Ser, and the alpha-subunit 195(His) residue substituted by Asn. The stereochemistry of proton addition to C(2)D(2) does not correlate with the measured K(m) values for C(2)H(2) reduction, or with the ability of the enzyme to reduce C(2)H(2) by four electrons to yield C(2)H(6). Instead, the electron flux through nitrogenase was observed to significantly influence the ratio of cis- to trans-1,2-C(2)H(2)D(2) formed. Finally, the product distribution observed for reduction of C(2)H(2) in D(2)O is not consistent with an earlier proposed enzyme-bound intermediate. An alternative model that accounts for the stereochemistry of C(2)H(2) reduction by nitrogenase based on a branched reaction pathway and an enzyme-bound eta(2)-vinyl intermediate is proposed.     

Potential energy surface and product branching ratios for the reaction of dicarbon, C(2)(X(1)Sigma(g)(+)), with methylacetylene, CH(3)CCH(X(1)A(1)): an ab initio/RRKM study

Ab initio calculations of the potential energy surface for the C(2)(X(1)Sigma(g)(+)) + CH(3)CCH(X(1)A(1)) reaction have been carried at the G2M level of theory. The calculations show that the dicarbon molecule in the ground singlet electronic state can add to methylacetylene without a barrier producing a three-member or a four-member ring intermediate, which can rapidly rearrange to the most stable H(3)CCCCCH isomer on the C(5)H(4) singlet surface. This isomer can then lose a hydrogen atom (H) or molecular hydrogen (H(2)) from the CH(3) group with the formation of H(2)CCCCCH and HCCCCCH, respectively. Alternatively, H atom migrations and three-member-ring closure/opening rearrangements followed by H and H(2) losses can lead to other isomers of the C(5)H(3) and C(5)H(2) species. According to the calculated energetics, the C(2)(X(1)Sigma(g)(+)) + CH(3)CCH reaction is likely to be a major source of the C(5)H(3) radicals (in particular, the most stable H(2)CCCCCH and HCCCHCCH isomers, which are relevant to the formation of benzene through the reactions with CH(3)). Among heavy-fragment product channels, only C(3)H(3) + C(2)H and c-C(3)H(2) + C(2)H(2) might compete with C(5)H(3) + H and C(5)H(2) + H(2). RRKM calculations of reaction rate constants and product branching ratios depending on the reactive collision energy showed that the major reaction products are expected to be H(2)CCCCCH + H (64-66%) and HCCCHCCH + H (34-30%), with minor contributions from HCCCCCH + H(2) (1-2%), HCCCHCC + H(2) (up to 1%), C(3)H(3) + C(2)H (up to 1%), and c-C(3)H(2) + C(2)H(2) (up to 0.1%) if the energy randomization is complete. The calculations also indicate that the C(2)(X(1)Sigma(g)(+)) + CH(3)CCH(X(1)A(1)) reaction can proceed by direct H-abstraction of a methyl hydrogen to form C(3)H(3) + C(2)H almost without a barrier.     

Pd0 mechanism of palladium-catalyzed cyclopropanation of alkenes by CH2N2: a DFT study

Pathways for the reaction of ethene with diazomethane to cyclopropane and dinitrogen catalyzed by Pd(0) complexes have been investigated at the B3LYP level of theory. The computed Gibbs free activation energy of 71.7 kJ mol(-1) for the most favorable catalytic cycle is by far lower than previously reported computed barriers for Pd(II)-catalyzed pathways of this reaction and is now in the range of experimental expectations. Pd(eta(2)-C(2)H(4))(2) is predicted to be the resting state of the catalyst and the product of a Pd(OAc)(2) precatalyst reduction. The Pd(0) ethene complex is in equilibrium with Pd(eta(2)-C(2)H(4))(kappaC-CH(2)N(2)), from which N(2) is eliminated in the rate-determining step. The resulting carbene complex (eta(2)-C(2)H(4))Pd=CH(2) reacts without intrinsic barrier with CH(2)N(2) to Pd(eta(2)-C(2)H(4))(2) and N(2) and with ethene to the palladacyclobutane (eta(2)-C(2)H(4))Pd(II)[kappaC(1),kappaC(3)-(CH(2))(3)]. The N(2) elimination from Pd(eta(2)-C(2)H(4))(2)(kappaC-CH(2)N(2)) to (eta(2)-C(2)H(4))(2)Pd=CH(2) leads to an overall Gibbs free activation energy of 84.2 kJ mol(-1). The intramolecular rearrangement of (eta(2)-C(2)H(4))(2)Pd=CH(2) to the palladacyclobutane (eta(2)-C(2)H(4))Pd(II)[kappaC(1),kappaC(3)-(CH(2))(3)] and the subsequent reductive elimination of cyclopropane are facile. At the BP86 level of theory, Pd(0) preferentially coordinates three ligands. Pd(eta(2)-C(2)H(4))(3) is predicted to be the resting state, and the N(2) elimination from the model complex Pd(eta(2)-C(2)H(4))(2)(kappaC-CH(2)N(2)) is the rate-determining transition state leading to an overall Gibbs free activation energy of 69.4 kJ mol(-1).     

Synthesis and reactivities of a bis(cyanamido)-capped triruthenium complex

The tetraruthenium complex [Cp*RuCl]4 (Cp* = eta(5)-C(5)Me(5)) reacts with Na(2)NCN to afford the anionic bis(cyanamido)-capped triruthenium complex [(Cp*Ru)3(micro(3)-NCN)(2)]- ((2-)), which undergoes single electron oxidation to form [(Cp*Ru)3(micro(3)-NCN)2] upon workup with 1 equiv. of [Cp(2)Fe](PF(6)) (Cp = eta(5)-C(5)H(5)). Treatment of (2-) with 1 equiv. of HCl at room temperature leads to the protonation of one of the Ru-Ru edges to give the hydrido-bridged complex [(Cp*Ru)3(micro-H)(micro-NCN)2], while the cationic side-on NCNH(2) complex [(Cp*Ru)3(micro-Cl)(micro(3)-NCN)(micro(3)-NCNH(2)-1kappaC,N:2kappaC:3kappaN)]Cl (5) is obtained by the reaction of (2-) with an excess amount of HCl at -78 degrees C. On the other hand, the reaction of (2-) with BR(3) (R = Et, Ph) results in the ligation of two BR(3) molecules to the terminal nitrogen atoms of the cyanamido ligands to yield the bis(borane) adduct (PPN)[(Cp*Ru)(3){(micro(4)-NCN)(BR(3))}(2)] (6, PPN = Ph(3)PNPPPh(3)). 6b (R = Et) slowly liberates one BEt(3) molecule in acetone to give the mono(borane) adduct (PPN)[(Cp*Ru)3(micro(3)-NCN){(micro(4)-NCN)(BEt(3))}] (7). (2-) is also shown to react with [AuCl(PPh(3))] or PhCOCl to afford the tetranuclear heterometallic complex [(Cp*Ru)3(micro(3)-NCN){(micro(4)-NCN)(AuPPh(3))}] (8) or the benzoylcyanamido complex [(Cp*Ru)3(micro(3)-NCN)(micro(3)-NCNCOPh)] in which the Au(PPh(3))+ or benzoyl fragment is bound to the terminal nitrogen atom of a cyanamido ligand. The molecular structures of PPN+(2-), 5.C(6)H(6), 7 and 8.C(6)H(6) have been determined by single-crystal X-ray analyses.     

Theoretical mechanistic study on the radical-molecule reaction of CHCl2/CCl3 with NO2

The radical-molecule reaction mechanism of CHCl(2) and CCl(3) with NO(2) have been explored theoretically at the B3LYP/6-311G(d,p) and MC-QCISD (single-point) levels. For the singlet potential energy surface (PES) of CHCl(2) + NO(2) reaction, the association of CHCl(2) with NO(2) was found to be a barrierless carbon-to-nitrogen approach forming an energy-rich adduct a (HCl(2)CNO(2)) followed by isomerization to b(1) (trans-cis-HCl(2)CONO), which can easily interconvert to b(2), b(3), and b(4). Subsequently, the most feasible pathway is the 1,3-chlorine migration associated with N-O1 bond cleavage of b(1) leading to P(1) (CHClO + ClNO). The second competitive pathway is the 1,4-chlorine migration along with N-O1 bond rupture of b(4) giving rise to P(2) (CHClO + ClON). Moreover, some of P(1) and P(2) can further dissociate to give P(6) (CHClO + Cl + NO). The lesser followed competitive channel is the 1,3-H-shift from C to N atom along with N-O1 bond rupture of b(1) to form P(3) (CCl(2)O + HNO). The concerted 1,4-H-shift accompanied by N-O1 bond fission of b(3) to product P(4) (CCl(2)O + HON) is even much less feasible. For the singlet PES of CCl(3) + NO(2) reaction, the only primary product is found to be P(1) (CCl(2)O + ClNO), which can lead to P(2) (CCl(2)O + Cl + NO) via dissociation of ClNO. The obtained major products CHClO and CCl(2)O for CHCl(2) + NO(2) and CCl(3) + NO(2) reactions, respectively, are in good agreement with kinetic detection in experiment. Compared with the singlet pathways, the triplet pathways may have less contributions to both reactions. Because the rate-determining transition state involved in the feasible pathways lie above the reactants R, the title reactions may be important in high-temperature processes. The similarities and discrepancies among the CH(n)Cl(3-n) + NO(2) (n == 0-2) reactions are discussed in terms of the substitution effect. The present study may be helpful for further experimental investigation of the title reactions.     

Mn(II) and Zn(II) interactions with peptide fragments from Parkinson's disease genes

Two peptide sequences from PARK9 Parkinson's disease gene, ProAspGluLysHisGluLeu, (P(1)D(2)E(3)K(4)H(5)E(6)L(7)) (1) and PheCysGlyAspGlyAlaAsnAspCysGly (F(1)C(2)G(3)D(4)G(5)A(6)N(7)D(8)C(9)G(10)) (2) were tested for Mn(II), Zn(II) and Ca(II) binding. The fragments are located from residues 1165 to 1171 and 1184 to 1193 in the PARK9 encoded protein. This protein can protect cells from poisoning of manganese, which is an environmental risk factor for a Parkinson's disease-like syndrome. Mono- and bi-dimensional NMR spectroscopy has been used to understand the details of metal binding sites at different pH values and at different ligand to metal molar ratios. Mn(II) and Zn(II) coordination with peptide (1) involves imidazole N(ε) or N(δ) of His(5) and carboxyl γ-O of Asp(2), Glu(3) and Glu(6) residues. Six donor atoms participate in Mn(II) binding resulting in a distorted octahedral geometry, possibly involving bidentate interaction of carboxyl groups; four donor atoms participate in Zn(II) binding resulting in a tetracoordinate geometry. Mn(II) and Zn(II) coordination involves the two cysteine residues with peptide (2); Mn(II) accepts additional ligand bonds from the carboxyl γ-O of Asp(4) and Asp(8) to complete the coordination sphere; the unoccupied sites may contain solvent molecules. The failure of Ca(II) ions to bind to either peptide (1) or (2) appears to result, under our conditions, from the absence of chelating properties in the chosen fragments.     

From tetrahydroborate- to aminoborylvinylidene-osmium complexes via alkynyl-aminoboryl intermediates

The tetrahydroborate OsH(η(2)-H(2)BH(2))(CO)(P(i)Pr(3))(2) (1) reacts with aniline and p-toluidine to give the aminoboryl derivatives [chemical structure: see text] (R = H (2), CH(3) (3)) and four H(2) molecules. Treatment of 2 and 3 with phenylacetylene gives Os{B(NHC(6)H(4)R)(2)}(C≡CPh)(CO)(P(i)Pr(3))(2) (R = H (4), CH(3) (5)), which react with HBF(4) to afford the amino(fluoro)boryl species Os{BF(NHC(6)H(4)R)}(C≡CPh)(CO)(P(i)Pr(3))(2) (R = H (6), CH(3) (7)). In contrast to HBF(4), the addition of acetic acid to 4 and 5 induces the release of phenylacetylene and the formation of the six-coordinate derivatives Os{B(NHC(6)H(4)R)(2)}(κ(2)-O(2)CCH(3))(CO)(P(i)Pr(3))(2) (R = H (8), CH(3) (9)). The coordination number six for 4 and 5 can be also achieved by addition of CO. Under this gas Os{B(NHC(6)H(4)R)(2)}(C≡CPh)(CO)(2)(P(i)Pr(3))(2) (R = H (10), CH(3) (11)) are formed. In toluene, these alkynyl-aminoboryl compounds evolve into the aminoborylvinylidenes Os{═C═C(Ph)B(NHC(6)H(4)R)(2)}(CO)(2)(P(i)Pr(3))(2) (R = H (12), CH(3) (13)) via a unimolecular 1,3-boryl migration from the metal to the C(β) atom of the alkynyl ligand. Similarly to 4 and 5, complexes 6 and 7 coordinate CO to give Os{BF(NHC(6)H(4)R)}(C≡CPh)(CO)(2)(P(i)Pr(3))(2) (R = H (15), CH(3) (16)), which evolve to Os{═C═C(Ph)BF(NHC(6)H(4)R)}(CO)(2)(P(i)Pr(3))(2) (R = H (17), CH(3) (18)).     

Cyclopentadienyl ruthenium, rhodium, and iridium vertices in metallaboranes: geometry and chemical bonding

Most cyclopentadienylmetallaboranes containing the vertex units CpM (M = Co, Rh, Ir; Cp = eta(5)-cyclopentadienyl ring, mainly eta(5)-Me(5)C(5)) and CpRu donating two and one skeletal electrons, respectively, have structures closely related to binary boranes or borane anions. Smaller clusters of this type, such as metallaborane analogues of arachno-B(4)H(10) (e.g., (CpIr)(2)B(2)H(8)), nido-B(5)H(9) (e.g., (CpRh)(2)B(3)H(7) and (CpRu)(2)B(3)H(9)), arachno-B(5)H(11) (e.g., CpIrB(4)H(10)), B(6)H(6)(2)(-) (e.g., (CpCo)(4)B(2)H(4)), nido-B(6)H(10) (e.g., CpIrB(5)H(9) and (CpRu)(2)B(4)H(10)), and arachno-B(6)H(12) (e.g., (CpIr)(2)B(4)H(10)), have the same skeletal electron counts as those of the corresponding boranes. However, such clusters with eight or more vertices, such as metallaborane analogues of B(8)H(8)(2)(-) (e.g., (CpCo)(4)B(4)H(4)), arachno-B(8)H(14) (e.g., (CpRu)(2)B(6)H(12)), and nido-B(10)H(14) (e.g., (CpRu)(2)B(8)H(12)), have two skeletal electrons less than those of the corresponding metal-free boranes, analogous to the skeletal electron counts of isocloso boranes relative to those of metal-free deltahedral boranes. Some metallaboranes have structures not analogous to metal-free boranes but instead analogous to metal carbonyl clusters such as 3-capped square pyramidal (CpRu)(2)B(4)H(8) and (CpRu)(3)B(3)H(8) analogous to H(2)Os(6)(CO)(16) and capped octahedral (CpRh)(3)B(4)H(4) analogous to Os(7)(CO)(21). In the metallaborane structures closely related to metal-free boranes, the favored degrees of BH and CpM vertices appear to be 5 and 6, respectively.     

Kinetics and mechanisms of the ozone/bromite and ozone/chlorite reactions

Ozone reactions with XO(2)(-) (X = Cl or Br) are studied by stopped-flow spectroscopy under pseudo-first-order conditions with excess XO(2)(-). The O(3)/XO(2)(-) reactions are first-order in [O(3)] and [XO(2)(-)], with rate constants k(1)(Cl) = 8.2(4) x 10(6) M(-1) s(-1) and k(1)(Br) = 8.9(3) x 10(4) M(-1) s(-1) at 25.0 degrees C and mu = 1.0 M. The proposed rate-determining step is an electron transfer from XO(2)(-) to O(3) to form XO(2) and O(3)(-). Subsequent rapid reactions of O(3)(-) with general acids produce O(2) and OH. The OH radical reacts rapidly with XO(2)(-) to form a second XO(2) and OH(-). In the O(3)/ClO(2)(-) reaction, ClO(2) and ClO(3)(-) are the final products due to competition between the OH/ClO(2)(-) reaction to form ClO(2) and the OH/ClO(2) reaction to form ClO(3)(-). Unlike ClO(2), BrO(2) is not a stable product due to its rapid disproportionation to form BrO(2)(-) and BrO(3)(-). However, kinetic spectra show that small but observable concentrations of BrO(2) form within the dead time of the stopped-flow instrument. Bromine dioxide is a transitory intermediate, and its observed rate of decay is equal to half the rate of the O(3)/BrO(2)(-) reaction. Ion chromatographic analysis shows that O(3) and BrO(2)(-) react in a 1/1 ratio to form BrO(3)(-) as the final product. Variation of k(1)(X) values with temperature gives Delta H(++)(Cl) = 29(2) kJ mol(-1), DeltaS(++)(Cl) = -14.6(7) J mol(-1) K(-1), Delta H(++)(Br) = 54.9(8) kJ mol(-1), and Delta S(++)(Br) = 34(3) J mol(-1) K(-1). The positive Delta S(++)(Br) value is attributed to the loss of coordinated H(2)O from BrO(2)(-) upon formation of an [O(3)BrO(2)(-)](++) activated complex.     

Structure, reactivity, and density functional theory analysis of the six-electron reductant, [(C5Me5)2U]2(mu-eta6:eta6-C6H6), synthesized via a new mode of (C5Me5)3M reactivity

The sterically crowded (C(5)Me(5))(3)U complex reacts with KC(8) or K/(18-crown-6) in benzene to form [(C(5)Me(5))(2)U](2)(mu-eta(6):eta(6)-C(6)H(6)), 1, and KC(5)Me(5). These reactions suggested that (C(5)Me(5))(3)U could be susceptible to (C(5)Me(5))(1-) substitution by benzene anions via ionic salt metathesis. To test this idea in the synthesis of a more conventional product, (C(5)Me(5))(3)U was treated with KN(SiMe(3))(2) to form (C(5)Me(5))(2)U[N(SiMe(3))(2)] and KC(5)Me(5). 1 has long U-C(C(5)Me(5)) bond distances comparable to (C(5)Me(5))(3)U, and it too is susceptible to (C(5)Me(5))(1-) substitution via ionic metathesis: 1 reacts with KN(SiMe(3))(2) to make its amide-substituted analogue [[(Me(3)Si)(2)N](C(5)Me(5))U](2)(mu-eta(6):eta(6)-C(6)H(6)), 2. Complexes 1 and 2 have nonplanar C(6)H(6)-derived ligands sandwiched between the two uranium ions. 1 and 2 were examined by reactivity studies, electronic absorption spectroscopy, and density functional theory calculations. [(C(5)Me(5))(2)U](2)(mu-eta(6):eta(6)-C(6)H(6)) functions as a six-electron reductant in its reaction with 3 equiv of cyclooctatetraene to form [(C(5)Me(5))(C(8)H(8))U](2)(mu-eta(3):eta(3)-C(8)H(8)), (C(5)Me(5))(2), and benzene. This multielectron transformation can be formally attributed to three different sources: two electrons from two U(III) centers, two electrons from sterically induced reduction by two (C(5)Me(5))(1-) ligands, and two electrons from a bridging (C(6)H(6))(2-) moiety.     

Reactions of copper(II)-phenol systems with O2: models for TPQ biosynthesis in copper amine oxidases

Copper(II) complexes supported by a series of phenol-containing bis(pyridin-2-ylmethyl)amine N(3) ligands (denoted as L(o)H, L(m)H, and L(p)H) have been synthesized, and their O(2) reactivity has been examined in detail to gain mechanistic insights into the biosynthesis of the TPQ cofactor (2,4,5-trihydroxyphenylalaninequinone, TOPA quinone) in copper-containing amine oxidases. The copper(II) complex of L(o)H (ortho-phenol derivative) involves a direct phenolate to copper(II) coordination and exhibits almost no reactivity toward O(2) at 60 °C in CH(3)OH. On the other hand, the copper(II) complex of L(m)H (meta-phenol derivative), which does not involve direct coordinative interaction between the phenol moiety and the copper(II) ion, reacts with O(2) in the presence of triethylamine as a base to give a methoxy-substituted para-quinone derivative under the same conditions. The product structure has been established by detailed nuclear magnetic resonance (NMR), infrared (IR) spectroscopy, and electrospray ionization-mass spectroscopy (ESI-MS) (including (18)O-labeling experiment) analyses. Density functional theory predicts that the reaction involves (i) intramolecular electron transfer from the deprotonated phenol (phenolate) to copper(II) to generate a copper(I)-phenoxyl radical; (ii) the addition of O(2) to this intermediate, resulting in an end-on copper(II) superoxide; (iii) electrophilic substitution of the phenolic radical to give a copper(II)-alkylperoxo intermediate; (iv) O-O bond cleavage concomitant with a proton migration, giving a para-quinone derivative; and (v) Michael addition of methoxide from copper(II) to the para-quinone ring and subsequent O(2) oxidation. This reaction sequence is similar to that proposed for the biosynthetic pathway leading to the TPQ cofactor in the enzymatic system. The generated para-quinone derivative can act as a turnover catalyst for aerobic oxidation of benzylamine to N-benzylidene benzylamine. Another type of copper(II)-phenol complex with an L(p)H ligand (para-phenol derivative) also reacts with O(2) under the same experimental conditions. However, the product of this reaction is a keto-alcohol derivative, the structure of which is qualitatively different from that of the cofactor. These results unambiguously demonstrate that the steric relationship between the phenol moiety and the supported copper(II) ion is decisive in the conversion of active-site tyrosine residues to the TPQ cofactor.     

Production of singlet oxygen by the reaction of non-basic hydrogen peroxide with chlorine gas

Non-basic hydrogen peroxide was found to be very easy to react with Cl(2) to produce singlet oxygen O(2)(a(1)Δ(g)) (i.e. the molecular oxygen in its first electronic excited state) when an H(+) absorbent such as C(5)H(5)N, CH(3)COONH(4), HCOONH(4) or NH(4)F was added into H(2)O(2) aqueous solution, and the long concealed fact that molecular H(2)O(2) can react with Cl(2) to produce O(2)(a(1)Δ(g)) was then uncovered. It is only when an H(+) absorbent has provided a stronger base than H(2)O to absorb the H(+) produced during the reaction that O(2)(a(1)Δ(g)) can be produced.     

Functional mimic of dioxygen-activating centers in non-heme diiron enzymes: mechanistic implications of paramagnetic intermediates in the reactions between diiron(II) complexes and dioxygen

Two tetracarboxylate diiron(II) complexes, [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(C(5)H(5)N)(2)] (1a) and [Fe(2)(mu-O(2)CAr(Tol))(4)(4-(t)BuC(5)H(4)N)(2)] (2a), where Ar(Tol)CO(2)(-) = 2,6-di(p-tolyl)benzoate, react with O(2) in CH(2)Cl(2) at -78 degrees C to afford dark green intermediates 1b (lambda(max) congruent with 660 nm; epsilon = 1600 M(-1) cm(-1)) and 2b (lambda(max) congruent with 670 nm; epsilon = 1700 M(-1) cm(-1)), respectively. Upon warming to room temperature, the solutions turn yellow, ultimately converting to isolable diiron(III) compounds [Fe(2)(mu-OH)(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (L = C(5)H(5)N (1c), 4-(t)BuC(5)H(4)N (2c)). EPR and M?ssbauer spectroscopic studies revealed the presence of equimolar amounts of valence-delocalized Fe(II)Fe(III) and valence-trapped Fe(III)Fe(IV) species as major components of solution 2b. The spectroscopic and reactivity properties of the Fe(III)Fe(IV) species are similar to those of the intermediate X in the RNR-R2 catalytic cycle. EPR kinetic studies revealed that the processes leading to the formation of these two distinctive paramagnetic components are coupled to one another. A mechanism for this reaction is proposed and compared with those of other synthetic and biological systems, in which electron transfer occurs from a low-valent starting material to putative high-valent dioxygen adduct(s).