Influence of imide functionalized organo‐modified Mg‐Al layered double hydroxide on the thermal and mechanical properties of new aliphatic‐aromatic poly (amide‐imide)

A new dicarboxylic acid modified Mg‐Al LDH (DLDH) containing imide groups was prepared and its effects on the thermal and mechanical properties of the new synthesized aliphatic‐aromatic poly (amide‐imide) (PAI) were investigated via preparation of PAI/nanocomposite films by solution casting method. The results of X‐ray diffraction (XRD), field emission‐scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) showed a uniform dispersion for LDH layers into the PAI matrix. For comparison, the effects of polyacrylic acid‐co‐poly‐2‐acrylamido‐ 2‐methylpropanesulfonic acid (PAMPS‐co‐PAA) modified Mg‐Al LDH (ALDH) on the PAI properties were also studied. The thermogravimetric analysis (TGA) results exhibited that the temperature at 5 mass% loss (T₅) increased from 277 °C to 310 °C for nanocomposite containing 2 mass% of DLDH, while T₅ for nanocomposite containing 2 mass% of ALDH increased to 320 °C, along with the more enhancement of char residue compared to the neat PAI. According to the tensile test results, with 5 mass% DLDH loading in the PAI matrix, the tensile strength increased from 51.6 to 70.8 MPa along with an increase in Young's modulus. Also the Young's modulus of PAI nanocomposite containing 5 mass% ALDH reduced from 1.95 to 0.81 GPa.     

Gas‐Phase Reaction of Monomethylhydrazine with Ozone: Kinetics and OH Radical Formation

The gas‐phase reaction of monomethylhydrazine (CH₃NH? NH₂; MMH) with ozone was investigated in a flow tube at atmospheric pressure and a temperature of 295 ± 2 K using N₂/O₂ mixtures (3–30 vol% O₂) as the carrier gas. Proton transfer reaction–mass spectrometry (PTR‐MS) and long‐path FT‐IR spectroscopy served as the main analytical techniques. The kinetics of the title reaction was investigated with a relative rate technique yielding k_MMH+O3 = (4.3 ± 1.0) × 10^?15 cm³ molecule^?1 s^?1. Methyldiazene (CH₃N?NH; MeDia) has been identified as the main product in this reaction system as a result of PTR‐MS analysis. The reactivity of MeDia toward ozone was estimated relative to the reaction of MMH with ozone resulting in k_MeDia+O3 = (2.7 ± 1.6) × 10^?15 cm³ molecule^?1 s^?1. OH radicals were followed indirectly by phenol formation from the reaction of OH radicals with benzene. Increasing OH radical yields with increasing MMH conversion have been observed pointing to the importance of secondary processes for OH radical generation. Generally, the detected OH radical yields were definitely smaller than thought so far. The results of this study do not support the mechanism of OH radical formation from the reaction of MMH with ozone as proposed in the literature.     

Epoxy polymer coating to prevent the corrosion of aluminum nanoparticles

Aluminum nanoparticles were coated by epoxy polymer in order to prevent the corrosion reaction. The coverage of the epoxy polymer film was controlled from 0% to 100%, which changed the corrosion rate of nanoparticles quantitatively. The surface of the polymer coating was investigated by transmission electron microscopy (TEM) and atomic force microscopy (AFM), and the corrosion resistance of these nanoparticles was estimated by the wet/dry corrosion test on platinum (Pt) plate with a NaCl solution. From a TEM analysis, 10 mass% polymer‐coated Al particles in the synthesis were almost 100% covered on the surface by a polymer film of 10 nm thick. On the other hand, 3 mass% polymer‐coated Al was partially covered by a film. In the AFM–Kelvin force microscopy, the potential around the Al particles had a relatively low value by the polymer coating, which indicated that the conductivity of the Al was isolated from Pt plate by the polymer. Both the corrosion and H₂ evolution reaction rates were quantitatively reduced by the mass% of polymer coating. In the case of 10 mass% coated sample, there was very little corrosion of Al nanoparticles. This fact suggested that the electrochemical reaction was suppressed by the polymer coating. Thus, it was found that the corrosion reaction rate of Al nanoparticles could be quantitatively suppressed by the mass% of epoxy coating. Copyright © 2015 John Wiley & Sons, Ltd.     

TG-MS analysis of nitrile butadiene rubber blends (NBR/PVC)

Blends of nitrile butadiene rubber (NBR) with polyvinyl chloride (PVC) are widely used in products such as hoses and seals. As part of a project that uses NBR/PVC blends for manufacturing forest fire hoses, blends of NBR/PVC with various inorganic fillers, such as Mg(OH)₂, china clay (organic modified kaolin) and nano clay (organic modified bentonite) were studied by TG-MS. No significant changes were observed to the type of the polymers’ decomposition products, compared to that of NBR/PVC blend without additives. The most remarkable change was the absence of HCl from decomposition products in the presence of the Mg(OH)₂ additive.     

Preparation and characterization of flame‐retardant lamellar Mg(OH)2 thin films on citric acid‐treated cotton fabrics

Preparation and characterization of lamellar magnesium hydroxide (Mg(OH)₂) thin films on cotton fabrics are reported in this paper. Mercerized cotton fabrics were treated with citric acid, so carboxyl groups were introduced to the surface of the fabrics. Mg(OH)₂ seeds were first adsorbed on the citric acid‐treated cotton fabrics and then Mg(OH)₂ thin films grew on the fabric through secondary growth method. Kinetics and isotherm studies found that the adsorption of Mg(OH)₂ seeds on citric acid‐treated cotton fabrics followed pseudo second‐order kinetic model and Langmuir isotherm. This indicated that Mg(OH)₂ seeds adsorption was monolayer chemical adsorption driven by electric attraction between positively charged Mg(OH)₂ seeds and ? COO^? ions on the cotton fiber surface. The X‐ray diffraction (XRD) and SEM characterizations of the Mg(OH)₂ thin films covered cotton fabrics found that standing flaky Mg(OH)₂ crystals formed a shell of porous but continuous network on cotton fabric surface. Owing to the Mg(OH)₂ thin film covering, the fabric had fireproof property, lower thermal conductivity and higher optical absorbance in the UV, Vis and IR regions. Copyright © 2010 John Wiley & Sons, Ltd.     

Functionalization of the active chain ends of poly(vinyl chloride) obtained by single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization: Synthesis of telechelic α,ω‐di(hydroxy)poly(vinyl chloride)

The chloroiodomethyl chain ends of poly(vinyl chloride) (PVC) obtained by the single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of vinyl chloride initiated with iodoform were quantitatively functionalized by the reaction with 2‐allyloxyethanol (CH₂?CHCH₂OCH₂CH₂OH). This reaction was performed in dimethyl sulfoxide at 70 °C and was catalyzed by sodium dithionite/sodium bicarbonate. The resulting product is the first example of telechelic PVC [α,ω‐di(hydroxy)PVC]. A possible mechanism for this reaction was suggested. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1255–1260, 2005     

Effects of elastomer on morphology,flammability and rheological properties of HIPS/PS‐encapsulated Mg(OH)2 composites

The effects of elastomer type on morphology, flammability and rheological properties of high‐impact polystyrene/Mg(OH)₂ based on encapsulated by polystyrene have been investigated. The ternary composites characterized by cone calorimetry, horizontal burning rate, limiting oxygen index (LOI), rheology and SEM. Morphology was controlled using poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] triblock copolymer (SEBS) or the corresponding maleinated SEBS (SEBS‐g‐MA). As revealed by SEM observations, composites of HIPS/SEBS/Mg(OH)₂ exhibit separation of the filler and elastomer and good adhesion between SEBS and the filler, whereas composites of HIPS/SEBS‐g‐MA/Mg(OH)₂ exhibit encapsulation of the filler by SEBS‐g‐MA. The flame retardant and rheological properties of ternary composites were strongly dependent on microstructure. The rheological test showed that the composites with encapsulation structure exhibit a stronger solid‐like response at low frequency than those of the composites with separate dispersion structure. The combustion tests showed that the composites with encapsulation structure showed higher flame retardant properties than those of separate dispersion structure at optimum use level of SEBS‐g‐MA. However, with the increase of the content of SEBS‐g‐MA, the flame retardancy of the composite declined somewhat which can be explained that the SEBS‐g‐MA coating acts as a heat and mass transfer barrier due to the formation of encapsulation structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2023–2030, 2007     

Reactions of mer(exo)‐ and mer(endo)‐[Co(dien)(dapo)X]2+ Isomers (X=OH,Cl, ONO2, N3)

Properties indirectly determined, or alluded to, in previous publications on the titled isomers have been measured, and the results generally support the earlier conclusions. Thus, the common five‐coordinate intermediate generated in the OH^?‐catalyzed hydrolysis of exo‐ and endo‐[Co(dien)(dapo)X]²⁺ (X=Cl, ONO₂) has the same properties as that generated in the rapid spontaneous loss of OH^? from exo‐ and endo‐[Co(dien)(dapo)OH]²⁺ (40±2% endo‐OH, 60±2% exo‐OH) and an unusually large capacity for capturing (R=[CoN₃]/[CoOH][]=1.3; exo‐[CoN₃]/endo‐[CoN₃]=2.1±0.1). Solvent exchange for spontaneous loss of OH^? from exo‐[Co(dien)(dapo)OH]²⁺ has been measured at 0.04 s^?1 (k₁, 0.50M NaClO₄, 25°) from which similar loss from the endo‐OH isomer may be calculated as 0.24 s^?1 (k₂). The OH^?‐catalyzed reactions of exo‐ and endo‐[Co(dien)(dapo)N₃]²⁺ result in both hydrolysis of coordinated via an OH^?‐limiting process =153 M ^?1 s^?1; =295 M ^?1 s^?1; K_H=1.3±0.1 M ^?1; 0.50M NaClO₄, 25.0°) and direct epimerization between the two reactants =33 M ^?1 s^?1; =110 M ^?1 s^?1; 1.0M NaClO₄, 25.0°). Comparisons are made with other rapidly reacting Co^III‐acido systems.     

Mussel‐inspired decoration of Ni(OH)2 nanosheets on 2D MoS2 towards enhancing thermal and flame retardancy properties of poly(lactic acid)

In the present work, a facile and environmental method was developed to fabricate the novel functionalized MoS₂ hybrid. Firstly, MoS₂ nanosheets were coated with polydopamine (PDA) through the self‐polymerization of dopamine (MoS₂‐PDA) in a buffer solution. Then the decoration of Ni(OH)₂ on the MoS₂‐PDA was synthesized because of the strong affinity of Ni²⁺ with hydroxyl groups in PDA. Finally, the as‐synthesized MoS₂‐PDA@Ni(OH)₂ was introduced into poly(lactic acid) (PLA) matrix to explore flame retardancy, thermal stability, and crystalline property of the composites. As confirmed by X‐ray diffraction (XRD), Fourier‐transform infrared spectrometer (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA), the MoS₂ nanosheets were dually modified with PDA and Ni(OH)₂ without destroying the original structures. The thermal degradation of PLA with MoS₂‐PDA@Ni(OH)₂ generated a notably higher yield of char. Moreover, the crystallization rate of composites is higher than neat PLA. The cone calorimeter test revealed that the introduction of 3% MoS₂‐PDA@Ni(OH)₂ resulted in lower Peak Heat Release Rate (PHRR) (decreased by 21.7%). Thus, the research provided an innovative functionalization method for manufacturing PLA composites with high performances.     

Design and preparation of poly(lactic acid) hydroxyapatite nanocomposites reinforced with phosphorus‐based organic additive: Thermal,combustion, and mechanical properties studies

A new phosphorus‐based organic additive (PDA) was designed and successfully synthesized using a three‐component reaction for improvement of the thermal and combustion resistance of polylactic acid (PLA). For compensate for mechanical properties of PLA, hydroxyapatite nanoparticles was modified via in situ surface modification with PDA and was used for preparation of PLA nanocomposites. The structure and morphology as well as thermal, combustion, and mechanical properties of the all PLA systems were investigated. The X‐ray diffraction (XRD) and field‐emission scanning electron microscopy (FE‐SEM) results indicated that the presence of PDA as surface modifier has been necessary for a desirable dispersion of hydroxyapatite (HA) nanoparticles in the PLA matrix. The thermal, combustion, and mechanical properties of the PLA system films were investigated using thermogravimetric analysis (TGA), microscale combustion calorimeter (MCC), and tensile test, respectively. The initial decomposition temperature and char residue of PLA containing 6 mass% of PDA along with 2 mass% HA nanoparticles were increased 20°C and 12% respectively, compared with that of the neat PLA. The peak of heat release rate was decreased from 566 W/g for the neat PLA to 412 W/g for PLA containing 2 mass% of PDA along with 6 mass% HA nanoparticles. By incorporation of only 2 mass% HA nanoparticles and 6 mass% of PDA, the tensile strength was obtained 51 MPa higher than that of the neat PLA.     

Corrosion resistance and cytotoxicity of a MgF2 coating on biomedical Mg–1Ca alloy via vacuum evaporation deposition method

To reduce the biocorrosion rate and enhance the biocompatibility by surface modification, MgF₂ coatings were prepared on Mg–1Ca alloy using vacuum evaporation deposition method. The average thickness of the coating was about 0.95 µm. The results of immersion test and electrochemical test indicated that the corrosion rate of Mg–1Ca alloy was effectively decreased after coating with MgF₂. The MgF₂ coating induced calcium phosphate deposition on Mg–1Ca alloy. After 72 h culture, MG63 cells and MC3T3‐E1 cells were well spread on the surface of the MgF₂‐coated Mg–1Ca alloy, while few cells were observed on uncoated Mg–1Ca alloy samples. In summary, MgF₂ coating showed beneficial effects on the corrosion resistance and thus improved cell response of the Mg–1Ca alloy effectively and should be a good surface modification method for other biomedical magnesium alloys. Copyright © 2013 John Wiley & Sons, Ltd.     

Characteristics of bioactive glass coatings obtained by pulsed laser deposition

A type of bioglass (named Mg10) formed by the substitution of 10wt%Na₂O with MgO in Bioglass^® 45S5 was designed and coated on the substrate Ti6Al4V by pulsed laser deposition (PLD) technique. Scratch test results show that the bonding strength of Mg10 coating with the substrate is higher than that of 45S5 coating. The reason is that the thermal expansion coefficient of Mg10 matches that of Ti6Al4V more than that of 45S5. The in vitro behavior of the Mg10 bioglass coatings is similar to that of 45S5 bioglass coatings and follows the bioactive mechanism. The bioactivity level of Mg10 coating is lower than that of 45S5 coating. This could be attributed to the addition of Mg in Mg10, as part of Mg ions in the bioglass become network former, which decreases the Si‐O‐NBO/Si‐O‐Si (s) intensity ratio of the Mg10 coating. Therefore, substitution of 10wt%Na₂O with MgO on the base of Bioglass® 45S5 coatings can improve their long‐term stability while maintaining a good biological response. Copyright © 2008 John Wiley & Sons, Ltd.     

Heteroligand mercury(II) complexes with aspartic,tartaric, and citric acids

Mercury(II) complexes with aspartic (H₂Asp) and tartaric acids (H₂Tart) and heteroligand mercury(II) complexes with H₂Asp, H₂Tart, and citric acids (H₃Cit) were studied by spectrophotometry in aqueous solutions with I = 0.1(NaClO₄) at 20 ± 2°C. It was found that the complexation in both binary and ternary systems depends on the concentrations of the reagents and the pH of the medium. The resulting complexes included [HgAsp], [Hg(OH)Asp]^?, [HgAsp₂]^2?, [HgTart], [Hg(OH)Tart]^?, [Hg(OH)₂Tart]^2?, [HgAspCit]^3?, [HgAspTart]^2?, and [Hg(OH)AspTart]^3?. The logarithms of their stability constants were 11.74 ± 0.12, 20.18 ± 0.17, 20.11 ± 0.10, 5.40 ± 0.11, 15.52 ± 0.09, 24.70 ± 0.12, 19.19 ± 0.12, 14.55 ± 0.16 and 23.80 ± 0.14, respectively. The experimental data were analyzed in terms of the mathematical models that predict the existence of a wide spectrum of complex species in solution and allow one to consider only those species that are sufficient for accurate reproduction of the observed pH-dependence of the optical density.     

Bi‐channel Surface Acoustic Wave Gas Sensor for Carbon Disulfide and Methanol Vapors in Polymer Plants

A C₆₀‐polyphenylacetylene (C₆₀‐PPA) and polyvinylpyrrolidone (PVP) coated two‐channel surface acoustic wave (SAW) crystal gas sensor with a homemade computer interface for data acquisition and data processing was developed and employed to detect carbon disulfide (CS₂) and methanol (CH₃OH) vapors in polymer plants. The frequency of surface acoustic wave oscillator decreases due to the adsorption of gas molecules on the coated materials of the SAW sensor. Six coating materials (C₆₀‐PPA, nafion, PPA, crytand [2,2], polyethene glycol and PVP) were used to adsorb and detect carbon disulfide and methanol gases. Adsorption of all the six coating materials to CS₂ and CH₃OH was found to be physical adsorption. The C₆₀‐PPA coated SAW detector exhibited more sensitive to CS₂ than the other coating materials. In contrast, the PVP coated SAW detector was more sensitive to CH₃OH than the other coating materials. With the two‐channel SAW sensor, the C₆₀‐PPA coated SAW showed a good detection limit of 0.4 ppm and good reproducibility with RSD of 3.37 % (n=10) for CS₂. Similarly, the PVP coated SAW also showed a good detection limit of 0.05 ppm and good reproducibility, with RSD of 0.86 % (n=10) for CH₃OH. The interference effect of other organic molecules on the SAW detection system was negligible, except for the irreversible adsorption of C₆₀‐PPA to propylamine. The frequency signals from the two‐channel SAW sensor array C₆₀‐PPA and PVP coatings were processed by a back‐propagation artificial neural network (BPN) and multiple regression analysis (MRA). Thus a two‐channel SAW sensor array with BPN and MRA has been successfully applied for the qualitative and quantitative analyses of CS₂ and CH₃OH in mixtures.     

Dehydration of the Sorel Cement Phase 3Mg(OH)2·MgCl2·8H2O studied by in situ Synchrotron X‐ray Powder Diffraction and Thermal Analyses

Dehydration is an important process which affects the chemical, physical and mechanical properties of materials. This article describes the thermal dehydration and decomposition of the Sorel cement phase 3Mg(OH)₂ · MgCl₂ · 8H₂O, studied by in situ synchrotron X‐ray powder diffraction and thermal analyses. Attention is paid on the determination of the chemical composition and crystal structure of the lower hydrates, identified as the phases 3Mg(OH)₂ · MgCl₂ · 5.4H₂O and 3Mg(OH)₂ · MgCl₂ · 4.6H₂O. The crystal structure of 3Mg(OH)₂ · MgCl₂ · 4.6H₂O is solved and refined by the Rietveld method and a structural model for the 3Mg(OH)₂ · MgCl₂ · 5.4H₂O phase is given. These phases show statistical distribution of water molecules, hydroxide and chloride anions positioned as ligands on the magnesium octahedra. A structural scheme of the temperature induced transformations in the thermal range from 25 to 500 °C is presented.     

Kinetics of OH reactions with N2H4, CH3NHNH2 and (CH3)2NNH2 in the gas phase

The gas phase reaction kinetics of OH with three di‐amine rocket fuels—N₂H₄, CH₃NHNH₂, and (CH₃)₂NNH₂—was studied in a discharge flow tube apparatus and a pulsed photolysis reactor under pseudo‐first‐order conditions in [OH]. Direct laser‐induced fluorescence monitoring of the [OH] temporal profiles in a known excess of the [diamine] yielded the following absolute second‐order OH rate coefficient expressions; k₁ = (2.17 ± 0.39) × 10^?11 e^(160±30)/T, k₂ = (4.59 ± 0.83) × 10^?11 e^(85±35)/T and k₃ = (3.35 ± 0.60) × 10^?11 e^(175±25)/T cm³ molec^?1 s^?1, respectively, for reactions with N₂H₄, CH₃NHNH₂ and (CH₃)₂NNH₂ in the temperature range 232–637 K. All three reactions did not show any discernable pressure dependence on He or N₂ buffer gas pressure of up to 530 torr. The magnitude of the weak temperature and the lack of pressure effects of the OH + N₂H₄ reaction rate coefficient suggest that a simple direct metathesis of H‐atom may not be important compared to addition of the OH to one of the N‐centers of the diamine skeleton, followed by rapid dissociation of the intermediate into products. Our findings on this reaction are qualitatively consistent with a previous ab initio study [ 3 ]. However, in the alkylated diamines, direct H‐abstraction from the methyl moiety cannot be completely ruled out. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 354–362, 2001     

Methods of preparation of novel composites of poly(ϵ‐caprolactone) and a modified Mg/Al hydrotalcite

12‐Hydroxydodecanoate (HD) anions were intercalated, via an ion‐exchange procedure, onto a Mg/Al hydrotalcite‐like compound with the formula [Mg_0.65Al_0.35(OH)₂](NO₃)_0.35·0.56H₂O. The obtained intercalate, characterized by chemical and thermal analyses, X‐ray powder diffraction, and Fourier transform infrared spectroscopy, had the formula [Mg_0.65Al_0.35(OH)₂](NO₃)_0.08(HD)_0.28·0.56H₂O and an interlayer distance of 2.27 nm. Structural considerations indicated that the charge‐balancing HO? (CH₂)₁₁? COO^? anions were accommodated in the interlayer region as a monofilm of partially interdigitated alkyl chains in a trans planar conformation and bearing the alcoholic group. The organically modified hydrotalcite was used to prepare novel composites based on poly(?‐caprolactone) (PCL) with different procedures: (1) solvent casting, (2) ring‐opening polymerization of ?‐caprolactone, and (3) blending of precursors consisting of a PCL intercalated oligomer with a high‐molecular‐weight PCL. Microcomposites were obtained by the solvent casting of a mixture of a high‐molecular‐weight PCL and the modified hydrotalcite. The ring‐opening polymerization of ?‐caprolactone initiated by the ? OH groups of the alkyl chains intercalated in the hydrotalcite led to hybrid materials in which a low‐molecular‐weight PCL was in part intercalated into the modified hydrotalcite. Nanocomposites containing exfoliated hydrotalcite were obtained through the mixing, in different weight ratios, of hybrids consisting of PCL oligomers and modified hydrotalcite with a commercial high‐molecular‐weight PCL. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2281–2290, 2005     

3Mg(OH)2·MgSO4·8H2O: A Metastable Phase in the System Mg(OH)2‐MgSO4‐H2O

In the course of investigations relating to magnesia oxysulfate cement the basic magnesium salt hydrate 3Mg(OH)₂ · MgSO₄ · 8H₂O (3–1–8 phase) was found as a metastable phase in the system Mg(OH)₂‐MgSO₄‐H₂O at room temperature (the 5–1–2 phase is the stable phase) and was characterized by thermal analysis, Raman spectroscopy, and X‐ray powder diffraction. The complex crystal structure of the 3–1–8 phase was determined from high resolution laboratory X‐ray powder diffraction data [space group C2/c, Z = 4, a = 7.8956(1) Å, b = 9.8302(2) Å, c = 20.1769(2) Å, β = 96.2147(16)°, and V = 1556.84(4) ų]. In the crystal structure of the 3–1–8 phase, parallel double chains of edge‐linked distorted Mg(OH₂)₂(OH)₄ octahedra run along [–110] and [110] direction forming a pattern of crossed rods. Isolated SO₄ tetrahedra and interstitial water molecules separate the stacks of parallel double chains.     

Characterization and corrosion resistance of organically modified silicate/MO2 (M = Zr,Ti, or Ce) hybrid coatings on a 6061‐T6 aluminum alloy

Hybrid coatings based on organically modified silicate (Ormosil)/ZrO₂ (0–1.0 wt %) and Ormosil/MO₂ (M = Ti or Ce) were synthesized through a sol–gel technique. Tetraethylenepentamine, 3‐glycidoxypropyltrimethoxysilane, tetraethoxysilane, and MO₂ (M = Zr, Ti, or Ce) metallic particle were used as precursors for the hybrid coatings. These hybrid films were deposited via spin coating onto an aluminum alloy to improve the corrosion protection. The effects induced by the ZrO₂ content and the metallic particle type on the chain dynamics, thermal stability, and corrosion performance of the coated samples were investigated. The rotating‐frame spin–lattice relaxation times and scale of the spin–diffusion path length indicated that the configuration of the hybrid films was highly crosslinked and dense and adhered to the aluminum alloy substrates. The thermal stability and the apparent activation energy, evaluated by van Krevelen's method, of the hybrid coatings depended on the ZrO₂ content and on the metallic particle type. Potentiodynamic and salt‐spray analysis revealed that the hybrid films provided exceptional barrier and corrosion protection in comparison with untreated aluminum alloy substrates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 335–342, 2006     

A flame‐retardant DOPO‐MgAl‐LDH was prepared and applied in poly (methyl methacrylate) resin

A novel inorganic and organic composite flame retardant (9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide [DOPO]–layered double hydroxide [LDH]) was synthesized via grafting DOPO with organic‐modified Mg/Al‐LDH, which was introduced into poly (methyl methacrylate) (PMMA) resin to prepare the flame‐retardant PMMA composites. Thermogravimetric analyzer (TGA) showed that the T_‐50% of DOPO‐LDH/PMMA composites enhanced by about 20°C, and with the 20% flame retardant, the residual char content can be increased by 39.8% in the air atmosphere compared with LDH/PMMA composites. In the UL‐94 and the limiting oxygen index (LOI) tests, it can be found that compared with LDH/PMMA composites, the LOI value of DOPO‐LDH/PMMA composites were raised evidently with the increased flame retardants, and the droplet combustion was greatly improved. These results could be ascribed to the action of DOPO free‐radical, catalytic charring of polymer and the effect of LDH physical barrier. Moreover, the novel DOPO‐LDH not only given PMMA a good flame‐retardant property and thermal stability, but also have higher visible light transmittance, ultraviolet‐shielding effect, and low loss of mechanical properties, which could further facilitate the wide application of inorganic environment‐friendly flame retardants in general resins and engineering resins and broaden the application of polymers.