System Zn–Rh–O: heat capacity and Gibbs free energy of formation using differential scanning calorimeter and electrochemical cell

The standard molar Gibbs free energy of formation of ZnRh₂O₄(s) has been determined using an oxide solid-state electrochemical cell wherein calcia-stabilized zirconia (CSZ) was used as an electrolyte. The oxide cell can be represented by: . The electromotive force was measured in the temperature range from 943.9 to 1,114.2 K. The standard molar Gibbs energy of formation of ZnRh₂O₄(s) from elements in their standard state using the oxide electrochemical cell has been calculated and can be represented by: . Standard molar heat capacity C ^o _p,m(T) of ZnRh₂O₄(s) was measured using a heat flux-type differential scanning calorimeter in two different temperature ranges, from 127 to 299 and 307 to 845 K. The heat capacity in the higher temperature range was fitted into a polynomial expression and can be represented by: . The heat capacity of ZnRh₂O₄(s), was used along with the data obtained from the oxide electrochemical cell to calculate the standard enthalpy and entropy of formation of the compound at 298.15 K.     

Thermodynamic studies on Pr2TeO6

The standard Gibbs energy of formation of Pr₂TeO₆ $ (\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)) $ was derived from its vapour pressure in the temperature range of 1,400–1,480 K. The vapour pressure of TeO₂ (g) was measured by employing a thermogravimetry-based transpiration method. The temperature dependence of the vapour pressure of TeO₂ over the mixture Pr₂TeO₆ (s) + Pr₂O₃ (s) generated by the incongruent vapourization reaction, Pr₂TeO₆ (s) = Pr₂O₃ (s) + TeO₂ (g) + ½ O₂ (g) could be represented as: $ { \log }\left\{ {{{p\left( {{\text{TeO}}_{ 2} ,\;{\text{g}}} \right)} \mathord{\left/ {\vphantom {{p\left( {{\text{TeO}}_{ 2} ,\;{\text{g}}} \right)} {{\text{Pa}} \pm 0.0 4}}} \right. \kern-0em} {{\text{Pa}} \pm 0.0 4}}} \right\} = 19. 12- 27132\; \left({\rm{{{\text{K}}}}/T} \right) $ . The $ \Updelta_{\text{f}} G^{^\circ } \;\left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} } \right) $ could be represented by the relation $ \left\{ {{{\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)} \mathord{\left/ {\vphantom {{\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}}} \right. \kern-0em} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}} \pm 5.0} \right\} = - 2 4 1 5. 1+ 0. 5 7 9 3\;\left(T/{\text{K}}\right) .$ Enthalpy increments of Pr₂TeO₆ were measured by drop calorimetry in the temperature range of 573–1,273 K and heat capacity, entropy and Gibbs energy functions were derived. The $ \Updelta_{\text{f}} H_{{298\;{\text{K}}}}^{^\circ } \;\left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} } \right) $ was found to be $ {{ - 2, 40 7. 8 \pm 2.0} \mathord{\left/ {\vphantom {{ - 2, 40 7. 8 \pm 2.0} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}}} \right. \kern-0em} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}} $ .     

Inner-sphere oxidation of a ternary dipicolinatochromium(III) complex involving a malonic acid co-ligand

The oxidation of a ternary complex of chromium(III), [Cr^III(DPA)(Mal)(H₂O)₂]^?, involving dipicolinic acid (DPA) as primary ligand and malonic acid (Mal) as co-ligand, was investigated in aqueous acidic medium. The periodate oxidation kinetics of [Cr^III(DPA)(Mal)(H₂O)₂]^? to give Cr(VI) under pseudo-first-order conditions were studied at various pH, ionic strength and temperature values. The kinetic equation was found to be as follows: \( {\text{Rate}} = {{\left[ {{\text{IO}}_{4}^{ - } } \right]\left[ {{\text{Cr}}^{\text{III}} } \right]_{\text{T}} \left( {{{k_{5} K_{5} + k_{6} K_{4} K_{6} } \mathord{\left/ {\vphantom {{k_{5} K_{5} + k_{6} K_{4} K_{6} } {\left[ {{\text{H}}^{ + } } \right]}}} \right. \kern-0pt} {\left[ {{\text{H}}^{ + } } \right]}}} \right)} \mathord{\left/ {\vphantom {{\left[ {{\text{IO}}_{4}^{ - } } \right]\left[ {{\text{Cr}}^{\text{III}} } \right]_{\text{T}} \left( {{{k_{5} K_{5} + k_{6} K_{4} K_{6} } \mathord{\left/ {\vphantom {{k_{5} K_{5} + k_{6} K_{4} K_{6} } {\left[ {{\text{H}}^{ + } } \right]}}} \right. \kern-0pt} {\left[ {{\text{H}}^{ + } } \right]}}} \right)} {\left\{ {\left( {\left[ {{\text{H}}^{ + } } \right] + K_{4} } \right) + \left( {K_{5} \left[ {{\text{H}}^{ + } } \right] + K_{6} K_{4} } \right)\left[ {{\text{IO}}_{4}^{ - } } \right]} \right\}}}} \right. \kern-0pt} {\left\{ {\left( {\left[ {{\text{H}}^{ + } } \right] + K_{4} } \right) + \left( {K_{5} \left[ {{\text{H}}^{ + } } \right] + K_{6} K_{4} } \right)\left[ {{\text{IO}}_{4}^{ - } } \right]} \right\}}} \) where k ₆ (3.65 × 10^?3 s^?1) represents the electron transfer reaction rate constant and K ₄ (4.60 × 10^?4 mol dm^?3) represents the dissociation constant for the reaction \( \left[ {{\text{Cr}}^{\text{III}} \left( {\text{DPA}} \right)\left( {\text{Mal}} \right)\left( {{\text{H}}_{2} {\text{O}}} \right)_{2} } \right]^{ - } \rightleftharpoons \left[ {{\text{Cr}}^{\text{III}} \left( {\text{DPA}} \right)\left( {\text{Mal}} \right)\left( {{\text{H}}_{2} {\text{O}}} \right)\left( {\text{OH}} \right)} \right]^{2 - } + {\text{H}}^{ + } \) and K ₅ (1.87 mol^?1 dm³) and K ₆ (22.83 mol^?1 dm³) represent the pre-equilibrium formation constants at 30 °C and I = 0.2 mol dm^?3. Hexadecyltrimethylammonium bromide (CTAB) was found to enhance the reaction rate, whereas sodium dodecyl sulfate (SDS) had no effect. The thermodynamic activation parameters were estimated, and the oxidation is proposed to proceed via an inner-sphere mechanism involving the coordination of IO₄ ^? to Cr(III).     

Kinetics and mechanism of oxidation of the chromium(III)-DL-aspartic acid complex/periodate reaction. Evidence for iron(II) catalysis

The kinetics of oxidation of the chromium(III)-DL- aspartic acid complex, [CrIIIHL]+ by periodate have been investigated in aqueous medium. In the presence of Fe^II as a catalyst, the following rate law is obeyed:

The Second Dissociation Constant of Carbonic Acid in Ethanol–Water Mixtures from 5 to 45°C

The determination of the second dissociation constant of carbonic acid K ₂ in 5, 15, and 25 mass% ethanol—water mixed solvents has been made using cell of the type:

Thermal properties of Na2TeO4(s) and TiTe3O8(s)

Molar heat capacity measurement on Na₂TeO₄(s) and TiTe₃O₈(s) were carried out using differential scanning calorimeter. The molar heat capacity values were least squares analyzed and the dependence of molar heat capacity with temperature for Na₂TeO₄(s) and TiTe₃O₈(s) can be given as, $$ \begin{gathered} {\text{C}}^{\text{o}}_{{{\text{p}},{\text{m}}}} \left\{ {{\text{Na}}_{ 2} {\text{TeO}}_{ 4} \left( {\text{s}} \right)} \right\} \,={159}.17 { } + 1.2\,\times\,10^{-4}T-{55}.34\,\times\,10^{5}/T^{2};\hfill \\ C^{\text{o}}_{{{\text{p}},{\text{m}}}} \left\{ {{\text{TiTe}}_{ 3} {\text{O}}_{ 8} \left( {\text{s}} \right)} \right\}\,=\,{ 275}.22{ }+{4}.0\,\times\, 10^{-5}T-{58}.28\,\times\,10^{5}/T^{2};\hfill \\ \end{gathered} $$ From this data, other thermodynamic functions were evaluated.     

Determination of thermodynamic properties of YRhO3(s) by solid-state electrochemical cell and differential scanning calorimeter

The standard molar Gibbs free energy of formation of YRhO₃(s) has been determined using a solid-state electrochemical cell wherein calcia-stabilized zirconia was used as an electrolyte. The cell can be represented by: ( - )\textPt - Rh/{ \textY₂\textO_\text3( \texts ) + \textYRh\textO₃( \texts ) + \textRh( \texts ) }//\textCSZ//\textO₂( p( \textO₂ ) = 21.21  \textkPa )/\textPt - Rh( + ) \left( - \right){\text{Pt - Rh/}}\left\{ {{{\text{Y}}_2}{{\text{O}}_{\text{3}}}\left( {\text{s}} \right) + {\text{YRh}}{{\text{O}}_3}\left( {\text{s}} \right) + {\text{Rh}}\left( {\text{s}} \right)} \right\}//{\text{CSZ//}}{{\text{O}}_2}\left( {p\left( {{{\text{O}}_2}} \right) = 21.21\;{\text{kPa}}} \right)/{\text{Pt - Rh}}\left( + \right) . The electromotive force was measured in the temperature range from 920.0 to 1,197.3 K. The standard molar Gibbs energy of the formation of YRhO₃(s) from elements in their standard state using this electrochemical cell has been calculated and can be represented by: D_\textfG^\texto{ \textYRh\textO₃( \texts ) }/\textkJ  \textmo\textl ^{- 1}( ±1.61 ) = - 1,147.4 + 0.2815  T  ( \textK ) {\Delta_{\text{f}}}{G^{\text{o}}}\left\{ {{\text{YRh}}{{\text{O}}_3}\left( {\text{s}} \right)} \right\}/{\text{kJ}}\;{\text{mo}}{{\text{l}}^{ - 1}}\left( {\pm 1.61} \right) = - 1,147.4 + 0.2815\;T\;\left( {\text{K}} \right) . Standard molar heat capacity C^o_p,m C^{o}_{{p,m}} (T) of YRhO₃(s) was measured using a heat flux-type differential scanning calorimeter in two different temperature ranges from 127 to 299 K and 305 to 646 K. The heat capacity in the higher temperature range was fitted into a polynomial expression and can be represented by: $ {*{20}{c}} {\mathop C\nolimits_{p,m}^{\text{o}} \left( {{\text{YRh}}{{\text{O}}_3},{\text{s,}}T} \right)\left( {{\text{J}}\;{{\text{K}}^{ - 1}}{\text{mo}}{{\text{l}}^{ - 1}}} \right)} & { = 109.838 + 23.318 \times {{10}^{ - 3}}T\left( {\text{K}} \right)} & { - 12.5964 \times {{10}^5}/{T^2}\left( {\text{K}} \right).} \\ {} & {\left( {305 \leqslant T\left( {\text{K}} \right) \leqslant 646} \right)} & {} \\ $ \begin{array}{*{20}{c}} {\mathop C\nolimits_{p,m}^{\text{o}} \left( {{\text{YRh}}{{\text{O}}_3},{\text{s,}}T} \right)\left( {{\text{J}}\;{{\text{K}}^{ - 1}}{\text{mo}}{{\text{l}}^{ - 1}}} \right)} & { = 109.838 + 23.318 \times {{10}^{ - 3}}T\left( {\text{K}} \right)} & { - 12.5964 \times {{10}^5}/{T^2}\left( {\text{K}} \right).} \\ {} & {\left( {305 \leqslant T\left( {\text{K}} \right) \leqslant 646} \right)} & {} \\ \end{array} The heat capacity of YRhO₃(s) was used along with the data obtained from the electrochemical cell to calculate the standard enthalpy and entropy of formation of the compound at 298.15 K.     

Kinetics and mechanism of oxidation of hydroxylamine by tetrachloroaurate(III) ion

The oxidation of H₂NOH is first-order both in [NH₃OH⁺] and [AuCl₄ ^–]. The rate is increased by the increase in [Cl^–] and decreased with increase in [H⁺]. The stoichiometry ratio, [NH₃OH⁺]/[AuCl₄ ^–], is 1. The mechanism consists of the following reactions.

Thermochemical properties of the coordination complex of 8-hydroxyquinolinato-bis-(salicylato) praseodymium (III)

The product, [Pr(C₇H₅O₃)₂(C₉H₆NO)], which was formed by praseodymium nitrate hexahydrate, salicylic acid (C₇H₆O₃), and 8-hydroxyquinoline (C₉H₇NO), was synthesized and characterized by elemental analysis, UV spectra, IR spectra, molar conductance, and thermogravimetric analysis. In an optimalizing calorimetric solvent, the dissolution enthalpies of [Pr(NO₃)₃·6H₂O(s)], [2 C₇H₆O₃(s) + C₉H₇NO(s)], [Pr(C₇H₅O₃)₂(C₉H₆NO)(s)], and [solution D (aq)] were measured to be, by means of a solution-reaction isoperibol microcalorimeter, $ \begin{gathered}\Updelta_{\text{s}} H_{\text{m}}^{\theta}\left[ {{ \Pr }\left( {{\text{NO}}_{ 3} } \right)_{ 3} \cdot 6{\text{H}}_{ 2} {\text{O}}\left( {\text{s}} \right), 2 9 8. 1 5{\text{ K}}} \right] \, = - ( 20. 6 6 { } \pm \, 0. 29)\,{\text{kJ}}\,{\text{mol}}^{ - 1} , \\\Updelta_{\text{s}} H_{\text{m}}^{\theta } \left[ { 2 {\text{C}}_{7} {\text{H}}_{ 6} {\text{O}}_{ 3} \left( {\text{s}} \right) +{\text{ C}}_{ 9} {\text{H}}_{ 7} {\text{NO}}\left( {\text{s}}\right),{ 298}. 1 5 {\text{ K}}} \right] \, = \, ( 4 2. 2 7 { }\pm \, 0. 3 1)\,{\text{kJ}}\,{\text{mol}}^{ - 1} , \\\Updelta_{\text{s}} H_{\text{m}}^{\theta } \left[ {{\text{solutionD }}\left( {\text{aq}} \right), 2 9 8. 1 5 {\text{ K}}} \right] \,= - \left( { 8 9. 1 5 { } \pm \, 0. 4 3}\right)\,{\text{kJ}}\,{\text{mol}}^{ - 1} , \\\end{gathered} $ Δ s H m θ [ Pr ( NO 3 ) 3 · 6 H 2 O ( s ) , 2 9 8.1 5 K ] = ? ( 20.6 6 ± 0.2 9 ) kJ mol ? 1 , Δ s H m θ [ 2 C 7 H 6 O 3 ( s ) + C 9 H 7 NO ( s ) , 298.1 5 K ] = ( 4 2.2 7 ± 0.3 1 ) kJ mol ? 1 , Δ s H m θ [ solution D ( aq ) , 2 9 8.1 5 K ] = ? ( 8 9.1 5 ± 0.4 3 ) kJ mol ? 1 , and $ \Updelta_{\text{s}} H_{\text{m}}^{\theta } \left\{ {\left[ {{\Pr }\left( {{\text{C}}_{ 7} {\text{H}}_{ 5} {\text{O}}_{ 3} }\right)_{ 2} \left( {{\text{C}}_{ 9} {\text{H}}_{ 6} {\text{NO}}}\right)} \right]\left( {\text{s}} \right),{ 298}. 1 5 {\text{ K}}}\right\} \, = - \left( { 4 1.0 4 { } \pm \, 0. 3 3}\right)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ Δ s H m θ { [ Pr ( C 7 H 5 O 3 ) 2 ( C 9 H 6 NO ) ] ( s ) , 298.1 5 K } = ? ( 4 1.0 4 ± 0.3 3 ) kJ mol ? 1 , respectively. Through an improved thermochemical cycle, the enthalpy change of the designed coordination reaction was calculated to be $\Updelta_{\text{r}} H_{\text{m}}^{\theta} = \, ( 2 1 3. 1 8\pm0. 6 9)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ Δ r H m θ = ( 2 1 3.1 8 ± 0.6 9 ) kJ mol ? 1 , the standard molar enthalpy of the formation was determined as $ \Updelta_{\text{f}} H_{\text{m}}^{\theta} \left\{ {\left[ {{\Pr }\left( {{\text{C}}_{ 7} {\text{H}}_{ 5} {\text{O}}_{ 3} }\right)_{ 2} \left( {{\text{C}}_{ 9} {\text{H}}_{ 6} {\text{NO}}}\right)} \right]\left( {\text{s}} \right), 2 9 8. 1 5 {\text{K}}}\right\} \, = \, - \, ( 1 8 7 5. 4\pm 3.1)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ Δ f H m θ { [ Pr ( C 7 H 5 O 3 ) 2 ( C 9 H 6 NO ) ] ( s ) , 2 9 8.1 5 K } = ? ( 1 8 7 5.4 ± 3.1 ) kJ mol ? 1 .     

Kinetics and mechanism of Am(III) extraction with TODGA

In the present paper, N,N,N’,N’-tetraoctyl diglycolamide (TODGA) as the extractant and n-dodecane as the diluent, the extraction kinetics behavior of Am(III) in TODGA/n-dodecane–HNO₃ system were studied, including stirring speed, the interfacial area, extractant concentration in n-dodecane, extracted ions concentration, acidity of aqueous phase and temperature. The results show that: the extraction process is controlled by diffusion mode under 130 rpm of stirring speed and by chemical reaction mode above 150 rpm. The extraction rate equation and the apparent extraction rate constant of Am(III) by TODGA/n-dodecane in 170 rpm and at 25 °C are followed as: $$ \begin{aligned} r_{0} = \left. {\frac{{{\text{d}}[{\text{M}}]_{{{\text{org}} .}} }}{{{\text{d}}{{t}}}}} \right|_{t = 0} & = k\,\frac{S}{V}\left[ {\text{Am}} \right]_{{{\text{aq}} . ,0}}^{0.94} \left[ {{\text{HNO}}_{3} } \right]_{{{\text{aq}} . ,0}}^{1.05} \left[ {\text{TODGA}} \right]_{{{\text{org}} . ,0}}^{1.19} \\ & \quad k = \left( {24.17 \pm 3.43} \right) \times 10^{ - 3} \,{\text{mol}}^{ - 2.18} \,L^{2.18} \,{ \hbox{min} }^{ - 1} \,{\text{cm}},\;E_{\text{a}} \left( {{\text{Am}}\left( {\text{III}} \right)} \right) = 25.94 \pm 0.98\;{\text{kJ/mol}} .\\ \end{aligned} $$      

Vibratio nal assig nme nts,co nformatio nal a nalysis,a nd molecular structures of $$\left[ {\text{C}_{\text{ n}} \text{mim}} \right]\left[ {\text{NTF}_{\text{2}} } \right]$$C nmimNTF2 ( n = 2, 4, 6, a nd 8) imidazolium-based io nic liquids: a combi ned experime ntal a nd qua ntum chemical approach

This work is aimed at providing physical insights about the interactions of cations, anion, and ion pairs of four imidazolium-based ionic liquids of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) with varying alkyl chain lengths (n = 2, 4, 6, and 8) using both DFT calculations and vibrational spectroscopic measurements (IR absorption and Raman scattering) in the mid- and far regions. The calculated Mulliken charge distributions of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) ion pairs indicate that hydrogen-bonding interactions between oxygen and nitrogen atoms (more negative charge) on \(\left[ {{\text{NTF}}_{2} } \right]^{ - }\) anion and the hydrogen atoms (more positive charge) on the imidazolium ring play a dominating role in the formation of ion pair. Thirteen stable conformers of \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) were optimized. According to our results, the strongest and weakest hydrogen bonds were existing in \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), respectively. A redshift of 290, 262, 258, and 257 cm^?1 has been observed for cations involving \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]^{ + }\), \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]^{ + }\),\(\left[ {{\text{C}}_{6} {\text{mim}}} \right]^{ + }\), and stretching vibrations of \({\text{C}}12{-}{\text{H}}3\), respectively. By increasing the chain length, the strength of hydrogen bonds decreases as a result of \({\text{C}}12{-}{\text{H}}3\) bond elongation and less changes are observed in stretching vibrations of \({\text{C}}12{-}{\text{H}}3\) compared to the free cations. To the best of our knowledge, this research is the first work which reports the far-IR of \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), \(\left[ {{\text{C}}_{6} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and the mid-IR of \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\).     

Kinetics of heterogeneous decomposition of hydrogen peroxide

The kinetics of the decomposition of hydrogen peroxide was studied in aqueous medium in the temperature range 25–40°C in the presence of Wofatit KPS-resin in the form of Cu(II)-ammine complex ions. The rate constant was deduced at various degrees of resin cross-linkage and different concentrations of hydrogen peroxide. The order of the decomposition reaction varied from first order to half order, i.e., the order of the reaction decreased with increasing the concentration of H₂O₂. The decomposition process was found to be a catalytic reaction which was controlled by the chemical reaction of H₂O₂ molecules with the active species inside the resin particles. The mechanism of the reaction can be summarized by the equation in which the subsequent reactions of the probable active complex are discussed.     

Thermodynamic stability of CaThF6(cr) by transpiration and e.m.f. techniques

In the present paper, we report the standard molar Gibbs energy of formation for CaThF₆ measured by gas equilibration and e.m.f. methods. The HF(g) vapour pressure over the equilibrium reaction: \({\text{CaThF}}_{6} \left( {\text{cr}} \right) + 2 {\text{H}}_{ 2} {\text{O}}\left( {\text{g}} \right) = {\text{CaF}}_{2} \left( {\text{cr}} \right) + {\text{ThO}}_{2} \left( {\text{cr}} \right) + 4{\text{HF}}\left( {\text{g}} \right)\) has been measured using transpiration technique. The above reaction mechanism has been established employing TG and XRD techniques. A fluoride e.m.f. cell: (−)Pt, CaF₂(cr) + ThOF₂(cr) + CaThF₆(cr) |CaF₂(cr)| NiO(cr) + NiF₂(cr), Pt(+) has been constructed to measure Gibbs energy of formation of CaThF₆ (cr) using CaF₂ (cr) as a solid electrolyte. The isobaric heat capacity \({\text{Cp}}_{\text{m}}^{{\circ }} \left( T \right)\) of the compound has been measured using differential scanning calorimetric technique. Based on the experimental results, thermodynamic functions for CaThF₆ have been generated.

     

A Cadmium Coordination Polymer Based on Phosphate Clusters: Synthesis,Crystal Structure,Electrochemical Investigation and Antibacterial Activity

A new d¹⁰ coordination polymer, \(\left\{ {\left( {{\text{C}}_{5} {\text{H}}_{14} {\text{N}}_{2} } \right)_{2} \left[ {{\text{Cd}}\left( {\left( {{\text{P}}_{6} {\text{O}}_{18} } \right)\left( {{\text{H}}_{2} {\text{O}}} \right)_{2} } \right)} \right] \cdot 6{\text{H}}_{2} {\text{O}}} \right\}_{n}\), was prepared and characterized by X-ray diffraction, IR-Raman spectroscopy, thermal analysis and cyclic voltammetry. The crystal structure determination reveals that the phosphate anions alternate with the cadmium octahedral to form an anionic coordination polymer extending along [001] direction. The double protonated homopiperazine cations and the water molecules ensure the interconnection between polymers and thus giving rise to three dimensional supramolecular networks. By means of cyclic voltammetry, it is shown that whilst the reduction of the complexed Cd²⁺ occurs with a biggest difficulty than this of its free form, the anodic oxidation of the heterocyclic N donor piperazine became quite easy, when it is displayed as a counterpart diprotonated cation, between the anionic layers of \(\left[ {{\text{Cd}}({\text{P}}_{6} {\text{O}}_{18} )({\text{H}}_{2} {\text{O}})_{2} )} \right]_{\text{n}}^{{4{\text{n}} - }}\). The antibacterial activity of the coordination polymer is also discussed.     

Investigations on NH4VO3 thermal decomposition in dry air

The results of investigations on thermal decomposition of NH₄VO₃ in dry air have been presented. TG?CDSC measurements were carried out under non-isothermal conditions at linear change of samples temperature in time and under isothermal conditions. Characterization of the products structure was performed by XRD method. MS method was used to determine evolved gaseous products. The decomposition of NH₄VO₃ was described by the following equation: $$ 6 {\text{NH}}_{ 4} {\text{VO}}_{ 3} \to \, \left( {{\text{NH}}_{ 4} } \right)_{ 3} {\text{V}}_{ 6} {\text{O}}_{ 1 6} \to \, \left( {{\text{NH}}_{ 4} } \right)_{ 2} {\text{V}}_{ 6} {\text{O}}_{ 1 6} \to {\text{ V}}_{ 2} {\text{O}}_{ 5}.$$      

Improvement of the electrochemical properties of “as-grown” boron-doped polycrystalline diamond electrodes deposited on tungsten wires using ethanol

The electrochemical properties of boron-doped diamond (BDD) polycrystalline films grown on tungsten wire substrates using ethanol as a precursor are described. The results obtained show that the use of ethanol improves the electrochemistry properties of “as-grown” BDD, as it minimizes the graphitic phase upon the surface of BDD, during the growth process. The BDD electrodes were characterized by Raman spectroscopy, scanning electronic microscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The boron-doping levels of the films were estimated to be ∼10²⁰ B/cm³. The electrochemical behavior was evaluated using the and redox couples and dopamine. Apparent heterogeneous electro-transfer rate constants were determined for these redox systems using the CV and EIS techniques. values in the range of 0.01–0.1 cm s⁻¹ were observed for the and redox couples, while in the special case of dopamine, a lower value of 10⁻⁵ cm s⁻¹ was found. The obtained results showed that the use of CH₃CH₂OH (ethanol) as a carbon source constitutes a promising alternative for manufacturing BDD electrodes for electroanalytical applications.     

Extraction kinetics of Uranium(VI) and Thorium(IV) with Tri-iso-amyl phosphate from nitric acid using a Lewis Cell

The extraction kinetics of uranium(VI) and thorium(IV) with Tri-iso-amyl phosphate (TiAP) from nitric acid medium has been investigated using a Lewis Cell. Especially, dependences of the extraction rate on stirring speed, temperature, interfacial area were firstly measured to elucidate the extraction kinetics regimes. The experimental results demonstrated that extraction kinetic of U(VI) is governed by chemical reactions at interface with an activation energy, E_a, of 43.41 kJ/mol, while the rate of Th(IV) extraction is proved to be intermediate controlled, of which the E_a is 23.20 kJ/mol. Reaction orders with respect to the influencing parameters of the extraction rate are determined, and the rate equations of U(VI) and Th(IV) at 293 K have been proposed as $$ {\text{r}} = - {\text{dcUO}}_{ 2} \left( {{\text{NO}}_{ 3} } \right)_{ 2} /{\text{dt}} = 1. 80 \times 10^{ - 3} \left[ {{\text{UO}}_{ 2} \left( {{\text{NO}}_{ 3} } \right)_{ 2} } \right]^{ 1.0 1} \left[ {\text{TiAP}} \right]^{0. 5 5} , $$ $$ {\text{r}} = - {\text{dcTh }}\left( {{\text{NO}}_{ 3} } \right)_{ 4} /{\text{dt}} = 1. 8 8\times 10^{ - 3} \left[ {{\text{Th }}\left( {{\text{NO}}_{ 3} } \right)_{ 4} } \right]^{ 1.0 4} \left[ {\text{TiAP}} \right]^{ 1. 7 7} \left[ {{\text{HNO}}_{ 3} } \right]^{0. 3 8} , $$ respectively.     

Kinetics and Mechanism of the Reduction of Enneamolybdonickelate(IV) by Arsenite

The kinetics and mechanism of the reduction of enneamolybdonickelate(IV) by arsenite in aqueous acid solution was studied by spectrophotometry. The reaction rate increases with increasing concentrations of H⁺ and with temperature. The associated rate law is: . The rate constants and activation parameters of the rate-determining step were evaluated. A mechanism related to this reaction was proposed.     

It spectroscopic study of the interaction of chlorosilanes with the surface of aerosil

The surface-chemical reactions of the chlorosilanes

$$\left( {\begin{array}{*{20}c} {} & {} & {} & {{\text{CH}}_{\text{3}} } & {} & {} & {{\text{CH}}_{\text{3}} } & {} \\ {} & {} & {} & {} & {} & {} & {} & {} \\ {{\text{CL}}_{\text{3}} {\text{SiH,}}} & {{\text{CL}}_{\text{3}} {\text{Si}}} & {} & {} & {,{\text{ ClSi}}} & {} & {} & {\text{H}} \\ {} & {} & {} & {} & {} & {} & {} & {} \\ {} & {} & {} & {\text{H}} & {} & {} & {{\text{CH}}_{\text{3}} } & {} \\ {} & {} & {} & {} & {} & {} & {} & {} \\ \end{array} } \right)$$     

Synthesis and structural characterization of three dinuclear Copper(II) complexes incorporating pyrazolyl-derived ligands

Three new binuclear copper complexes of formulae $ \left[ {{\text{Cu}}_{2}^{\text{II}} {\text{Pz}}_{2}^{\text{Me3}} {\text{Br}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (1), $ \left[ {{\text{Cu}}_{ 2}^{\text{II}} {\text{Pz}}_{2}^{\text{Ph2Me}} {\text{Cl}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (2) and $ \left[ {{\text{Cu}}_{2}^{\text{II}} \left( {{\text{Pz}}^{\text{PhMe}} } \right)_{ 4} {\text{Cl}}_{ 4} } \right] $ (3) (Pz^Me3?=?3,4,5-trimethylpyrazole, Pz^Ph2Me?=?4-methyl-3,5-diphenylpyrazole and Pz^PhMe?=?3-methyl-5-phenylpyrazole) have been synthesized and characterized by chemical analysis, FTIR and ³¹P NMR spectroscopy and single-crystal X-ray diffraction. Complex 1 is a doubly bromo-bridged dimer, while complexes 2 and 3 are chloro-bridged dimers. The Cu(II) centers are in a distorted tetrahedral geometry for 1 and 2 and a distorted square pyramidal N₂Cl₃ environment for 3.