γ-Radiation effect on ionic liquid [bmim][BF4]

The effect of γ radiation on 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) was investigated in detail. It was found that radiation induced an increase of UV absorption of the ionic liquid but no change in its glass transition point. Raman spectroscopy analysis indicates that the radiolysis of [bmim][BF₄] induces detectable destruction of alkyl-chain and scission of H-atoms of ring of imidizolium cation, and the relatively small changes of BF₄⁻ anion. Viscosities of irradiated [bmim][BF₄] samples were measured at different shear rates and temperatures, and compared with irradiated [bmim][PF₆] samples. The plots of shear stress against shear rate indicates that [bmim][BF₄] is a Newtonian fluid, no matter with irradiation. The viscosity of irradiated [bmim][BF₄] decreased with increasing of temperature and followed an Arrhenius equation. However, radiation caused no change in the viscosity of [bmim][BF₄], but a decrease in the viscosity of [bmim][PF₆] by up to 10%. We conclude that the radiation stability of [bmim][BF₄] is higher than [bmim][PF₆].     

Combined dealkoxycarbonylation and lactonisation of unsaturated malonates in ionic liquids

Heating unsaturated malonates with LiCl and water in [bmim][Br] or [bmim][BF₄]/[bmim][Br] produces unsaturated esters or lactones, respectively.     

Ionic liquid induced changes in the properties of aqueous zwitterionic surfactant solution

Modifying properties of aqueous surfactant solutions by addition of external additives is an important area of research. Unusual properties of ionic liquids (ILs) make them ideal candidates for this purpose. Changes in important physicochemical properties of aqueous zwitterionic N-dodecyl- N, N-dimethyl-3-ammonio-1-propanesulfonate (SB-12) surfactant solution upon addition of hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF 4], are reported. Dynamic light scattering results indicate a dramatic reduction in the average micellar size in the presence of [bmim][BF 4]; micellar (or micelle-like) aggregation in the presence of as high as 30 wt % [bmim][BF 4] is confirmed. Responses from fluorescence probes are used to obtain critical micelle concentration (cmc), aggregation number ( N agg), and dipolarity and microfluidity of the micellar pseudophase of aqueous SB-12 in the presence of [bmim][BF 4]. In general, increasing the amount of [bmim][BF 4] to 30 wt % results in decrease in N agg and increase in cmc. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the micellar pseudophase is observed on increasing [bmim][BF 4] concentration in the solution. It is attributed to increased water penetration into the micellar pseudophase as [bmim][BF 4] is added to aqueous SB-12. It is proposed that IL [bmim][BF 4] behaves similar to an electrolyte and/or a cosurfactant when present at low concentrations and as a polar cosolvent when present at high concentrations. Electrostatic attraction between cation of IL and anion of zwitterion, and anion of IL and cation of zwitterion at low concentrations of [bmim][BF 4] is evoked to explain the observed changes. Presence of IL as cosolvent appears to reduce the efficiency of micellization process by reducing the hydrophobic effect.     

Concentration-dependent dual behavior of hydrophilic ionic liquid in changing properties of aqueous sodium dodecyl sulfate

Modifying physicochemical properties of aqueous surfactant solutions in favorable fashion by addition of environmentally benign room-temperature ionic liquids (ILs) has enormous future potential. Due to its unusual properties, an IL may demonstrate a unique role in altering the properties of aqueous surfactant solutions. Changes in the properties of aqueous sodium dodecyl sulfate (SDS), an anionic surfactant, upon addition of a common and popular "hydrophilic" ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4] are presented. Addition of low concentrations of [bmim][BF4] (i.e., 相似文献   

Unique role of hydrophilic ionic liquid in modifying properties of aqueous Triton X-100

Modification of important physicochemical properties of aqueous surfactant solutions can be achieved by addition of environmentally benign room temperature ionic liquids (ILs). While low aqueous solubility of "hydrophobic" ILs limits the amount of IL that may be added to achieve desired changes in the physicochemical properties, hydrophilic ILs do not have such restrictions associated to them. Alterations in the key physicochemical properties of aqueous solutions of a common nonionic surfactant Triton X-100 (TX100) on addition of up to 30 wt % hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) are reported. The presence of micellar aggregates in as high as 30 wt % [bmim][BF4]-added aqueous TX100 solutions is established by dynamic light scattering and fluorescence probe behavior. Increasing the concentration of [bmim][BF4] results in decrease in average micellar size and aggregation number and increase in critical micelle concentration, indicating an overall unfavorable aggregation process. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the palisade layer of the micellar phase upon [bmim][BF4] addition implies increased water penetration and the possibility of TX100-[bmim][BF4] interactions. While the changes in some of the physicochemical properties indicate the role of [bmim][BF4] to be similar to a cosurfactant, the IL acts like a cosolvent as far as changes in other properties are concerned. Effectiveness of IL [bmim][BF4] in modifying physicochemical properties of aqueous TX100 is demonstrated.     

添加中低浓度离子液体[bmim][BF4]对吐温-20临界胶束浓度和胶束结构的影响

添加离子液体会对表面活性剂在水溶液中的聚集行为产生重要影响。本文研究了吐温-20在中低浓度离子液体四氟硼酸1-丁基-3-甲基咪唑鎓([bmim][BF_4])中的胶束化行为。随着[bmim][BF_4]浓度(cIL)从0增加到0.2mol·L~(-1),吐温-20的临界胶束浓度逐渐增大。相比cIL0.05mol·L~(-1),在cIL0.05mol·L~(-1)时加入[bmim][BF_4]使吐温-20临界胶束浓度增大得更加显著。吐温-20胶束聚集数随着离子液体浓度的增加而逐渐减小,这一结果也说明加入离子液体会对吐温-20胶束的生成有抑制作用。吐温-20胶束化热力学研究表明,吐温-20在不同浓度离子液体中的胶束化是熵、焓共同驱动,并具有熵-焓补偿性。随着离子液体浓度的增加,吐温-20胶束平均粒径和胶束微粘性均表现出先增大后减小的变化,在cIL=0.05mol·L~(-1)时达到最大值。     

1-丁基-3-甲基咪唑四氟硼酸盐的热稳定性、平衡蒸汽压和标准蒸发焓

利用非等温、等温热重分析(TG)法,研究了高纯氮气气氛下1-丁基-3-甲基咪唑四氟硼酸盐([bmim][BF4])离子液体的热稳定性、平衡蒸汽压和标准蒸发焓.非等温热重(TG)曲线表明[bmim][BF4]的初始分解温度(Tonset)和最大分解速率对应的温度(Tm)分别为697和734K.然而长期等温TGA研究表明,[bmim][BF4]的最高可使用温度约为513K.另外,利用基于TG的蒸发技术研究了[bmim][BF4]的平衡蒸汽压(pe)与温度的关系并计算了标准蒸发焓.在503-543K温度范围内,离子液体[bmim][BF4]的pe和温度的关系是:lgpe=(16±1)+(-6.85±0.25)×103/T.[bmim][BF4]的标准蒸发焓为(131±5)kJ·mol-1.     

两亲性ABA三嵌段共聚物的合成及其自组装行为研究

用Grubbs第二代催化剂引发降冰片烯类单体(NBEDE)和链转移剂在离子液体[bmim][BF4]中的开环易位聚合(ROMP)反应,反应体系保持均相,无聚合物析出,得到两端为叔溴的遥爪型官能化聚合物(Br-PNBEDE-Br).以Br-PNBEDE-Br作为大分子引发剂,在离子液体介质中引发甲基丙烯酸2-(二甲氨基)乙酯(DMAEMA)的原子转移自由基聚合(ATRP),制得分子量分布较窄的两亲性三嵌段共聚物(PDMAEMA-PNBEDE-PDMAEMA).利用动态激光光散射(DLS),原子力显微镜(AFM),透射电镜(TEM)等技术,考察嵌段共聚物在选择性溶剂/共溶剂(H2O/THF)中的胶束行为,以及溶液pH值对胶束的影响.结果表明,TEM观察到胶束为球形,由于TEM和AFM是在干态下测得胶束的粒径,而DLS是在溶液中测定胶束的流体力学直径,所以TEM和AFM得到的胶束粒径小于DLS的结果.不同pH值对胶束尺寸大小有明显的影响,胶束微粒随着pH值的增大而增大.     

分子模拟研究气体在室温离子液体中的溶解度

在作者先前建立的分子力场基础上, 采用Widom粒子插入法预测了CO₂、N₂、O₂、Ar及CH₄等5种气体在多种咪唑类离子液体中的溶解度, 包括2种侧链长度的阳离子和3种阴离子. 首先考察了256个离子对组成的体系中溶质分子插入次数对计算结果的影响, 在此基础上计算了不同温度下气体在1-丁基-3-甲基咪唑的四氟化硼盐([bmim][BF₄])和六氟化磷盐([bmim][PF₆])中的溶解度. 计算结果正确反映了CO₂气体溶解度的变化趋势, 在[bmim][BF₄]中溶解度的模拟结果与实验值符合很好, 且明显优于Pádua等的模拟结果；在[bmim][PF₆]中的溶解度较实验值偏高, 精度与文献模拟结果相当；并预测了较高温度下CO₂气体在[bmim][BF₄]和[bmim][PF₆]中的溶解度. 计算结果也正确地反映了5种气体在[bmim][PF₆]中溶解度实验值的相对大小. 另外考察了常温下几种气体在不同室温离子液体中的溶解度, 模拟结果表明气体在含有较长碳链和双-三氟甲基磺酰胺阴离子(Tf₂N^－)的离子液体中溶解度较大.     

Nonaqueous microemulsion-containing ionic liquid [bmim][PF6] as polar microenvironment

The phase behavior of toluene/Triton X-100 (TX-100)/1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]) was studied. It was demonstrated that the single-phase microemulsion area covered about 75% of the phase diagram at 25 °C. Electrical conductivities of the system with different w ([bmim][PF6]-to-TX-100 molar ratio) values were determined, and the results were used to locate the sub-regions of the single-phase microemulsion. The results showed that a transform from [bmim][PF6]-in-oil ([bmim][PF6]/O) microstructure via a bicontinuous region to an oil-in-[bmim][PF6] (O/[bmim][PF6]) microstructure occurred with the increase of Φ (weight fraction of TX-100 and [bmim][PF6] in the system). The aggregate size of the reverse microemulsions of [bmim][PF6]/O was determined using small-angle X-ray scattering. The results showed that the size of the reverse microemulsions depended markedly on the w values.     

Ionic liquids with perfluorinated alkoxyaluminates

Ionic liquids with the weakly coordinating perfluoroalkoxyaluminate anions, Al(ORF)4-, are obtained by a metathesis reaction of LiAl(ORF)4 and [bmim]Cl or [bmpyr]Cl in high yields. The compounds [bmim][Al(hfip)4] and [bmpyr][Al(hfip)4] have surprisingly low viscosities at elevated temperatures (60 degrees C) and an exceptionally high electrochemical window, which might render them useful for certain applications.     

咪唑类离子液体混合物吸收CO2性能研究

结合常规离子液体和功能型离子液体在吸收CO₂方面的优势,将两类咪唑类离子液体进行混合,对其吸收CO₂的效果和再生性能进行了实验研究。结果表明,两类咪唑类离子液体混合后流动性明显改善,与CO₂接触气液传质顺畅;常规离子液体[bmim][BF₄]和[bmim][Tf₂N]与胺功能型离子液体[NH₂e-mim][BF₄]混合物较单一的离子液体吸收CO₂的量大,[bmim][CH₃CO₂]与[NH₂e-mim][BF₄]混合后较单一的[bmim][CH₃CO₂]吸收量有明显的减低;随着常规咪唑类离子液体阳离子碳链增长,混合离子液体吸收CO₂的效果变强;与胺乙基功能型离子液体混合吸收CO₂时,阴离子为[Tf₂N]的常规咪唑类离子液体要比阴离子为[BF₄]的吸收效果好;离子液体混合物吸收CO₂后经再生循环利用10次,混合物质量基本不变,循环使用后吸收CO₂性能为初始吸收性能的75%~85%。     

Enzymatic polyester synthesis in ionic liquids

The enzymatic synthesis of polyesters by ring-opening polymerization (ROP) and polycondensation in three ionic liquids, i.e., [bmim][Tf₂N], [bmim][PF₆] and [bmim][BF₄] was investigated. For the enzymatic ROP of ε-caprolactone it was found that [bmim][PF₆] and [bmim][BF₄] result in an inhomogeneous reaction mixture upon polymerization, causing polymerization characteristics similar to bulk polymerization. In contrast, for [bmim][Tf₂N] characteristics similar to toluene were observed. Molecular weights of 7000-9500 g/mol were obtained. In the polycondensation of dimethyl adipate and dimethyl sebacate, respectively, with 1,4-butanol the low volatility of ionic liquids was successfully utilized to perform the reactions in an open vessel at temperatures close to the boiling point of the condensation by-product. Molecular weights up to 5400 g/mol were obtained. This, in combination with the tunable solvent hydrophilicity of ionic liquids could offer an advantage in the polymerization of highly polar monomers with low solubility in organic solvents.     

Ionic liquids/[bmim][N3] mixtures: promising media for the synthesis of aryl azides by SNAr

The nucleophilic aromatic substitution of some activated aryl or heteroaryl halides has been performed in ionic liquid solution, using the 1-butyl-3-methylimidazolium azide as a nucleophile. The reaction course was studied varying the structures of both substrates and ionic liquids. In particular, in the latter case, the reaction of 2-bromo-5-nitrothiophene was carried out in five different ionic liquids ([bmim][BF 4], [bmim][PF 6], [bmim][NTf 2], [bm 2im][NTf 2], and [bmpyrr][NTf 2]). Finally, for all the substrates considered, a comparison with data obtained in MeOH solution in the presence of NaN 3 was also performed. Data collected indicate that in some cases it is possible to obtain aromatic or heteroaromatic azide derivatives in satisfactory yield by means of a S NAr reaction using [bmim][N 3] as the nucleophile.     

Effects of temperature and anion species on CO2 permeability and CO2/N2 separation coefficient through ionic liquid membranes

The permeability of carbon dioxide (CO₂) through imidazolium-based ionic liquid membranes was measured by a sweep gas method. Six species of ionic liquids were studied in this work as follows: [emim][BF₄], [bmim][BF₄], [bmim][PF₆], [bmim][Tf₂N], [bmim][OTf], and [bmim][dca]. The ionic liquids were supported with a polyvinylidene fluoride porous membrane. The measurements were performed at T = (303.15 to 343.15) K. The partial pressure difference between feed and permeate sides was 0.121 MPa. The permeability of the CO₂ increases with temperature for the all ionic liquid species. Base on solution diffusion theory, it can be explained that the diffusion coefficient of CO₂ in an ionic liquid affects the temperature dependence more strongly than the solubility coefficient. The greatest permeability was obtained with the [bmim][Tf₂N] membrane. The membrane of [bmim][PF₆] presents the lowest permeability.The separation coefficient between CO₂ and N₂ through the ionic liquid membranes was also investigated at the volume fraction of CO₂ at feed side 0.10. The separation coefficient decreases with the increase of temperature for the all ionic liquid species. The membrane of [emim][BF₄] and [bmim][BF₄] gives the highest separation coefficient at constant temperature. The lowest separation coefficient was obtained from [bmim][Tf₂N] membrane which presents the highest permeability of CO₂.     

Chemoselective reduction of aromatic nitro and azo compounds in ionic liquids using zinc and ammonium salts

Nitroarenes were chemoselectively reduced to the corresponding amines using zinc and aqueous ammonium salts in ionic liquids as a safe and recyclable reaction medium. Our results specify the effect of ammonium salts in the process; the combination of Zn/NH₄Cl in [bmim][PF₆] or Zn/HCO₂NH₄ in [bmim][BF₄] were the suitable conditions for the reduction of nitroarenes. Azobenzenes were also smoothly reduced to hydrazobenzenes with Zn/HCO₂NH₄ (aq.) in recyclable [bmim][BF₄] without any over reduction to the corresponding anilines.     

A Novel Green Preparation of a, a''''-Bis (substituted benzylidene)-cycloalkanones Promoted by FeCl_3 6H-2O in Ionic Liquid

a, a'-Bis(substituted benzylidene)cycloalkanones were efficiently prepared from cycloalkanones and benzaldehydes in [bmim][BF4] by using iron(III) chloride hexahydrate as a catalyst. It is shown that [bmim][BF4] and iron(III) chloride hexahydrate can be quantitatively recovered and be reused effectively for many times. Compared with the known methods, this novel process has the advantage of being an envkonmentally benign process together with good yields and mild reaction conditions.     

Thermodynamic modeling of the phase behavior of binary systems of ionic liquids and carbon dioxide with the group contribution equation of state

The group contribution equation of state (GC-EOS) was applied to predict the phase behavior of binary systems of ionic liquids of the homologous families 1-alkyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate with CO2. Pure group parameters for the new ionic liquid functional groups [-mim][PF6] and [-mim][BF4] and interaction parameters between these groups and the paraffin (CH3, CH2) and CO2 groups were estimated. The GC-EOS extended with the new parameters was applied to predict high-pressure phase equilibria in binary mixtures of the ionic liquids [emim][PF6], [bmim][PF6], [hmim][PF6], [bmim][BF4], [hmim][BF4], and [omim][BF4] with CO2. The agreement between experimental and predicted bubble point data for the ionic liquids was excellent for pressures up to 20 MPa, and even for pressures up to about 100 MPa, the agreement was good. The results show the capability of the GC-EOS to describe phase equilibria of systems consisting of ionic liquids.     

Palladium‐Catalyzed Enyne Cyclization of 2′‐Alkenyl 2‐Alkynoates in Imidazolium‐Type Ionic Liquids

The use of [bmim][BF₄], [bmim][PF₆], and [bmim][Cl] ILs as the solvents in Pd(II)‐catalyzed enyne cyclization of 2′‐alkenyl 2‐alkynoates in the presence of cupric chloride has been investigated. The Z/E stereoselectivity of the reaction could range from 90:10 to 4:96 by tuning the amount of LiCl in ILs. After the separation of the product, the IL–catalyst mixture could be recovered by treatment with hydrochloric acid and recycled several times without an obvious loss of catalytic activity.     

Optical Spectroscopic Studies on Structural Changes of Helical-rich Proteins in Aqueous Solutions of Ionic Liquids

We have investigated structural changes of myoglobin and cytochrome c, which are helical-rich proteins, in aqueous 1-butyl-3-methylimidazolium chloride ([bmim][Cl]) solutions by Fourier transform infrared and circular dichroism spectroscopy. At low [bmim][Cl] concentrations {X (mol% IL) < 10}, both proteins unfold. Remarkably, at high [bmim][Cl] concentrations (X > 10), myoglobin aggregates whereas cytochrome c refolds its α-helical structure. The tertiary structures of both proteins are disrupted over the entire range of studied [bmim][Cl] concentrations. Our results suggest that, in aqueous solutions at high [bmim][Cl] concentrations, the differences in structural transitions between myoglobin and cytochrome c might be due to the difference in hydration between these proteins.