纳米介孔Ru-PPh2-SBA-16催化水相中高烯丙醇异构化反应的研究

以2-(二苯基膦)乙基三乙氧基硅烷和正硅酸乙酯为混合硅源, 采用延时共缩聚法经表面活性剂F127自组装合成了二苯基膦(PPh2)修饰的SBA-16纳米介孔分子筛(PPh2-SBA-16), 通过PPh2配体络合Ru(Ⅱ)化合物制备出固载化的Ru(Ⅱ)非均相催化剂(Ru-PPh2-SBA-16), 样品仍然保持了SBA-16的规整孔道结构. 以水相中高烯丙醇异构化反应为探针, 考察了所制备催化剂的催化性能, 发现其对目标产物具有高选择性, 虽然其催化活性略低于对应的均相Ru(Ⅱ)催化剂, 但该催化剂易与产物分离, 且重复使用三次后催化效率基本不变, 活性相与载体结合牢固, 不存在明显的脱落和流失, 因此更适合于工业化应用.     

介孔Ru-PPh2-KIT-6催化剂应用于水相中烯丙醇异构化的研究

以2-(二苯基膦)乙基三乙氧基硅烷和正硅酸乙酯为混合硅源,运用延时共缩聚法制备带有二苯基膦(PPh2-)修饰配体的KIT-6型介孔氧化硅材料,通过络合Ru(II)获得固载化Ru(II)有机金属催化剂(Ru-PPh2-KIT-6),该催化剂具有规整介孔结构.在水相烯丙醇异构化反应中显示高活性和高选择性,催化性能接近均相催化剂,活性相与载体结合牢固,能够重复使用5次以上.     

苯乙烯-丁二烯-苯乙烯三嵌段共聚物新型加氢催化剂的研究

烯烃加氢得到烷烃,从化学热力学角度判断这个反应可以进行,由于氢分子相当稳定,ＨＨ键不易受极化的影响而断裂,实际上,如果没有催化剂的存在,反应是很难进行的．各种过渡金属,例如铂、钯、铑、钴、铱和镍等都具有未充满和不稳定的ｄ电子轨道,容易吸附大量的氢并使其活化,从而很容易对许多基团进行氢化反应．钌／二烯烃／氢气反应体系就符合上述原理,苯乙烯丁二烯苯乙烯三嵌段共聚物（ＳＢＳ）就属二烯烃类共聚物,由于这类共聚物中存在ＣＣ不饱和双键,在日光、紫外光、热等环境下,其耐侯性和热稳定性不好,限制了它在更广泛…     

Ruthenium(II) polypyridyl complexes: potential precursors, metalloligands, and topo II inhibitors

Neutral and cationic mononuclear complexes containing both group 15 and polypyridyl ligands [Ru(kappa3-tptz)(PPh3)Cl2] [1; tptz=2,4,6-tris(2-pyridyl)-1,3,5-triazine], [Ru(kappa3-tptz)(kappa2-dppm)Cl]BF4 [2; dppm=bis(diphenylphosphino)methane], [Ru(kappa3-tptz)(PPh3)(pa)]Cl (3; pa=phenylalanine), [Ru(kappa3-tptz)(PPh3)(dtc)]Cl (4; dtc=diethyldithiocarbamate), [Ru(kappa3-tptz)(PPh3)(SCN)2] (5) and [Ru(kappa3-tptz)(PPh3)(N3)2] (6) have been synthesized. Complex 1 has been used as a metalloligand in the synthesis of homo- and heterodinuclear complexes [Cl2(PPh3)Ru(micro-tptz)Ru(eta6-C6H6)Cl]BF4 (7), [Cl2(PPh3)Ru(mu-tptz)Ru(eta6-C10H14)Cl]PF6 (8), and [Cl2(PPh3)Ru(micro-tptz)Rh(eta5-C5Me5)Cl]BF4 (9). Complexes 7-9 present examples of homo- and heterodinuclear complexes in which a typical organometallic moiety [(eta6-C6H6)RuCl]+, [(eta6-C10H14)RuCl]+, or [(eta5-C5Me5)RhCl]+ is bonded to a ruthenium(II) polypyridine moiety. The complexes have been fully characterized by elemental analyses, fast-atom-bombardment mass spectroscopy, NMR (1H and 31P), and electronic spectral studies. Molecular structures of 1-3, 8, and 9 have been determined by single-crystal X-ray diffraction analyses. Complex 1 functions as a good precursor in the synthesis of other ruthenium(II) complexes and as a metalloligand. All of the complexes under study exhibit inhibitory effects on the Topoisomerase II-DNA activity of filarial parasite Setaria cervi and beta-hematin/hemozoin formation in the presence of Plasmodium yoelii lysate.     

SBA-15负载的Cu(Ⅱ)席夫碱配合物催化的苯乙烯氧化反应制备苯甲醛

采用一步法将原硅酸四乙酯与3-氨丙基三乙氧基硅烷在表面活性剂P123作用下,酸性共水解制备出氨基功能化的介孔分子筛SBA-15(NH2-SBA-15),再利用其中氨基与水杨醛的缩合反应制备SBA-15固载的席夫碱,该席夫碱与Cu(NO3)2溶液反应最终制成固定于SBA-15的Cu(II)席夫碱配合物多相催化剂Cu-SBA-15.采用X射线衍射、红外光谱仪、紫外可见分光光度计、场发射电镜、透射电镜、N2吸附-脱附、元素分析、原子发射光谱和热重分析对催化剂进行了表征,并将此催化剂用于无有机溶剂条件下催化氧化苯乙烯制备苯甲醛,考察了反应时间、反应温度、H2O2用量、水的用量、催化剂用量对反应的影响.当反应温度为100°C,反应时间8 h,H2O2与苯乙烯的摩尔比为2:1,不额外添加溶剂,且催化剂用量为3.8 wt%时,苯乙烯的转化率最高为84.4%,苯甲醛选择性为83.9%,催化剂的TOF值为261.1 h–1,并且重复使用3次后活性没有明显下降.规则的孔道、较大的比表面积以及分布均匀的活性中心可能是催化剂活性提高的原因.     

New benzo[h]quinoline-based ligands and their pincer Ru and Os complexes for efficient catalytic transfer hydrogenation of carbonyl compounds

New benzo[h]quinoline ligands (HCN'N) containing a CHRNH2 (R=H (a), Me (b), tBu (c)) function in the 2-position were prepared starting from benzo[h]quinoline N-oxide (in the case of ligand a) and 2-chlorobenzo[h]quinoline (for ligands b and c). These compounds were used to prepare ruthenium and osmium complexes, which are excellent catalysts for the transfer hydrogenation (TH) of ketones. The reaction of a with [RuCl2(PPh3)3] in 2-propanol at reflux afforded the terdentate CN'N complex [RuCl(CN'N)(PPh3)2] (1), whereas the complexes [RuCl(CN'N)(dppb)] (2-4; dppb=Ph2P(CH2)4PPh2) were obtained from [RuCl2(PPh3)(dppb)] with a-c, respectively. Employment of (R,S)-Josiphos, (S,R)-Josiphos*, (S,S)-Skewphos, and (S)-MeO-Biphep in combination with [RuCl2(PPh3)3] and ligand a gave the chiral derivatives [RuCl(CN'N)(PP)] (5-8). The osmium complex [OsCl(CN'N)(dppb)] (12) was prepared by treatment of [OsCl2(PPh3)3] with dppb and ligand a. Reaction of the chloride 2 and 12 with NaOiPr in 2-propanol/toluene afforded the hydride complexes [MH(CN'N)(dppb)] (M=Ru 10, Os 14), through elimination of acetone from [M(OiPr)(CN'N)(dppb)] (M=Ru 9, Os 13). The species 9 and 13 easily reacted with 4,4'-difluorobenzophenone, via 10 and 14, respectively, affording the corresponding isolable alkoxides [M(OR)(CN'N)(dppb)] (M=Ru 11, Os 15). The complexes [MX(CN'N)(P2)] (1-15) (M=Ru, Os; X=Cl, H, OR; P=PPh3 and P2=diphosphane) are efficient catalysts for the TH of carbonyl compounds with 2-propanol in the presence of NaOiPr (2 mol %). Turnover frequency (TOF) values up to 1.8x10(6) h(-1) have been achieved using 0.02-0.001 mol % of catalyst. Much the same activity has been observed for the Ru--Cl, --H, --OR, and the Os--Cl derivatives, whereas the Os--H and Os--OR derivatives display significantly lower activity on account of their high oxygen sensitivity. The chiral Ru complexes 5-8 catalyze the asymmetric TH of methyl-aryl ketones with TOF approximately 10(5) h(-1) at 60 degrees C, up to 97 % enatiomeric excess (ee) and remarkably high productivity (0.005 mol % catalyst loading). High catalytic activity (TOF up to 2.2x10(5) h(-1)) and enantioselectivity (up to 98 % ee) have also been achieved with the in-situ-generated catalysts prepared from [MCl2(PPh3)3], (S,R)-Josiphos or (S,R)-Josiphos*, and the benzo[h]quinoline ligands a-c.     

有机-无机杂化L-Rh/SiO2氢甲酰化催化剂的研究Ⅰ.PPh3-Rh/SiO2的催化性能及表征

 利用有机-无机杂化的概念,以三苯基膦直接修饰Rh/SiO2制备了PPh3-Rh/SiO2多相催化剂. 在浆态床烯烃氢甲酰化反应中,该催化剂在10 MPa,373 K温和条件下的活性和选择性远高于Rh/SiO2的活性和选择性,与相应的均相催化剂HRhCO(PPh3)3的性能相当,且具有易分离的优点. 31P MAS NMR和XPS技术表征结果表明,催化剂中的配体PPh3与高度分散的Rh之间存在配位作用,形成了兼具多相和均相催化性能的有机-无机杂化催化剂. 该催化剂对不同碳数烯烃的氢甲酰化反应都具有较好的催化性能.     

Syntheses, structural determinations of [Ru(ROCS2)2(PPh3)2](+/0) pairs, and kinetic analyses of thermal reactions involving transient trans-[Ru(iPrOCS2)2(PPh3)2] species (ROCS2(-) = ethyl- or isopropyldithiocarbonate and PPh3 = triphenylphosphine)

Controlled-potential electrochemical oxidation of cis-[Ru(ROCS2)2(PPh3)2] (R = Et, iPr) yielded corresponding Ru(III) complexes, and the crystal structures of cis-[Ru(ROCS2)2(PPh3)2] and trans-[Ru(ROCS2)2(PPh3)2](PF6) were determined. Both pairs of complexes exhibited almost identical coordination structures. The Ru-P distances in trans-[Ru(III)(ROCS2)2(PPh3)2](PF6) [2.436(3)-2.443(3) A] were significantly longer than those in cis-[Ru(II)(ROCS2)2(PPh3)2] [2.306(1)-2.315(2) A]: the smaller ionic radius of Ru(III) than that of Ru(II) stabilizes the trans conformation for the Ru(III) complex due to the steric requirement of bulky phosphine ligands while mutual trans influence by the phosphine ligands induces significant elongation of the Ru(III)-P bonds. Cyclic voltammograms of the cis-[Ru(ROCS2)2(PPh3)2] and trans-[Ru(ROCS2)2(PPh3)2]+ complexes in dichloromethane solution exhibited typical dual redox signals corresponding to the cis-[Ru(ROCS2)2(PPh3)2](+/0) (ca. +0.15 and +0.10 V vs ferrocenium/ferrocene couple for R = Et and iPr, respectively) and to trans-[Ru(ROCS2)2(PPh3)2](+/0) (-0.05 and -0.15 V vs ferrocenium/ferrocene for R = Et and iPr, respectively) couples. Analyses on the basis of the Nicholson and Shain's method revealed that the thermal disappearance rate of transient trans-[Ru(ROCS2)2(PPh3)2] was dependent on the concentration of PPh3 in the bulk: the rate constant for the intramolecular isomerization reaction of trans-[Ru(iPrOCS2)2(PPh3)2] was determined as 0.338 +/- 0.004 s(-1) at 298.3 K (deltaH* = 41.8 +/- 1.5 kJ mol(-1) and deltaS* = -114 +/- 7 J mol(-1) K(-1)), while the dissociation rate constant of coordinated PPh3 from the trans-[Ru(iPrOCS2)2(PPh3)2] species was estimated as 0.113 +/- 0.008 s(-1) at 298.3 K (deltaH* = 97.6 +/- 0.8 kJ mol(-1) and deltaS* = 64 +/- 3 J mol(-1) K(-1)), by monitoring the EC reaction (electrode reaction followed by chemical processes) at different concentrations of PPh3 in the bulk. It was found that the trans to cis isomerization reaction takes place via the partial dissociation of iPrOCS2(-) from Ru(II), contrary to the previous claim that it takes place by the twist mechanism.     

Binuclear ruthenium macrocycles formed via the weak-link approach

The "weak-link approach" for the synthesis of metallomacrocycles has been used to synthesize a series of novel Ru(II) macrocycles in high yield. RuCl2(PPh3)3 has been reacted with two different phosphino-alkyl-ether hemilabile ligands, 1,4-(PPh2(CH2)2O)2C6H4 and 1,4-(PPh2(CH2)2OCH2)2C6H4. The hemilabile bidentate ligand coordinates to Ru(II) centers through both the P and O atoms to form bimetallic "condensed intermediates". The weak Ru-O bonds have been selectively cleaved with CO, 1,2-diaminopropane, and pyridine to yield large open macrocycles. This is the first example of the weak-link approach employed to synthesize macrocycles with Ru, and metal centers in general that have more than four coordination sites.     

Mixed phosphane η5-CpRuCl(PR3)2 complexes as ambifunctional catalysts for anti-Markovnikov hydration of terminal alkynes

The catalytic activity of [CpRu(L)(2)(MeCN)]PF(6) (L = 2-diphenylphosphinopyridine with bulky groups at C-6) for anti-Markovnikov hydration of terminal alkynes to aldehydes is retained when one heterocyclic ligand L is replaced by L' = PPh(3). Equal amounts of CpRuCl(PPh(3))(2) (1) and phosphane L in acetone solution equilibrate to a mixture of 1, CpRuCl(L)(PPh(3)) (2), and CpRuCl(L)(2) (3), which acts as highly active in situ catalyst for preparative anti-Markovnikov hydration of alkynes in water-rich media (2 mol % [Ru], 60 °C, 3-18 h in 4:1 (v/v) acetone/water). Reactions were completed in <15 min at 160 °C.     

Electronic structures of ruthenium and osmium complexes of 9,10-phenanthrenequinone

The reaction of 9,10-phenanthrenequinone (PQ) with [M(II)(H)(CO)(X)(PPh(3))(3)] in boiling toluene leads to the homolytic cleavage of the M(II)-H bond, affording the paramagnetic trans-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 1; M = Os, X = Br, 3) and cis-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 2; M = Os, X = Br, 4) complexes. Single-crystal X-ray structure determinations of 1, 2·toluene, and 4·CH(2)Cl(2), EPR spectra, and density functional theory (DFT) calculations have substantiated that 1-4 are 9,10-phenanthrenesemiquinone radical (PQ(?-)) complexes of ruthenium(II) and osmium(II) and are defined as trans-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (1), cis-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (2), trans-[Os(II)(PQ(?-))(PPh(3))(2)(CO) Br] (3), and cis-[Os(II)(PQ(?-))(PPh(3))(2)(CO)Br] (4). Two comparatively longer C-O [average lengths: 1, 1.291(3) ?; 2·toluene, 1.281(5) ?; 4·CH(2)Cl(2), 1.300(8) ?] and shorter C-C lengths [1, 1.418(5) ?; 2·toluene, 1.439(6) ?; 4·CH(2)Cl(2), 1.434(9) ?] of the OO chelates are consistent with the presence of a reduced PQ(?-) ligand in 1-4. A minor contribution of the alternate resonance form, trans- or cis-[M(I)(PQ)(PPh(3))(2)(CO)X], of 1-4 has been predicted by the anisotropic X- and Q-band electron paramagnetic resonance spectra of the frozen glasses of the complexes at 25 K and unrestricted DFT calculations on 1, trans-[Ru(PQ)(PMe(3))(2)(CO)Cl] (5), cis-[Ru(PQ)(PMe(3))(2)(CO)Cl] (6), and cis-[Os(PQ)(PMe(3))(2)(CO)Br] (7). However, no thermodynamic equilibria between [M(II)(PQ(?-))(PPh(3))(2)(CO)X] and [M(I)(PQ)(PPh(3))(2)(CO)X] tautomers have been detected. 1-4 undergo one-electron oxidation at -0.06, -0.05, 0.03, and -0.03 V versus a ferrocenium/ferrocene, Fc(+)/Fc, couple because of the formation of PQ complexes as trans-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (1(+)), cis-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (2(+)), trans-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (3(+)), and cis-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (4(+)). The trans isomers 1 and 3 also undergo one-electron reduction at -1.11 and -0.96 V, forming PQ(2-) complexes trans-[Ru(II)(PQ(2-))(PPh(3))(2)(CO)Cl](-) (1(-)) and trans-[Os(II)(PQ(2-))(PPh(3))(2)(CO)Br](-) (3(-)). Oxidation of 1 by I(2) affords diamagnetic 1(+)I(3)(-) in low yields. Bond parameters of 1(+)I(3)(-) [C-O, 1.256(3) and 1.258(3) ?; C-C, 1.482(3) ?] are consistent with ligand oxidation, yielding a coordinated PQ ligand. Origins of UV-vis/near-IR absorption features of 1-4 and the electrogenerated species have been investigated by spectroelectrochemical measurements and time-dependent DFT calculations on 5, 6, 5(+), and 5(-).     

Coordination chemistry of 4-methyl-2,6,7-trioxa-1-phosphabicyclo[2,2,1]heptane: preparation and characterization of Ru(II) complexes

The complexes TpRu[P(OCH(2))(2)(OCCH(3)](PPh(3))Cl (2) [Tp = hydridotris(pyrazolyl)borate; P(OCH(2))(2)(OCCH(3)) (1) = (4-methyl-2,6,7-trioxa-1-phosphabicyclo[2,2,1]heptane] and TpRu(L)(PPh(3))Cl [L = P(OCH(2))(3)CEt (3), PMe(3) (4) or P(OMe)(3) (5)], (η(6)-C(6)H(6))Ru(L)Cl(2) [L = PPh(3) (6), P(OMe)(3) (7), PMe(3) (8), P(OCH(2))(3)CEt (9), CO (10) or P(OCH(2))(2)(OCCH(3)) (11)] and (η(6)-p-cymene)Ru(L)Cl(2) [L = P(OCH(2))(3)CEt (12), P(OCH(2))(2)(OCCH(3))P(OCH(2))(2)(OCCH(3)) (13), P(OMe)(3) (14) or PPh(3) (15)] have been synthesized, isolated, and characterized by NMR spectroscopy, cyclic voltammetry, mass spectrometry, and, for some complexes, single crystal X-ray diffraction. Data from cyclic voltammetry and solid-state structures have been used to compare the properties of (1) with other phosphorus-based ligands as well as carbon monoxide. Data from the solid-state structures of Ru(II) complexes show that P(OCH(2))(2)(OCCH(3)) has a cone angle of 104°. Cyclic voltammetry data reveal that the Ru(II) complexes bearing P(OCH(2))(2)(OCCH(3)) have more positive Ru(III/II) redox potentials than analogous complexes with the other phosphorus ligands; however, the Ru(III/II) potential for (η(6)-C(6)H(6))Ru[P(OCH(2))(2)(OCCH(3))]Cl(2) is more negative compared to the Ru(III/II) potential for the CO complex (η(6)-C(6)H(6))Ru(CO)Cl(2). For the Ru(II) complexes studied herein, these data are consistent with the overall donor ability of 1 being less than other common phosphines (e.g., PMe(3) or PPh(3)) or phosphites [e.g., P(OCH(2))(3)CEt or P(OMe)(3)] but greater than carbon monoxide.     

Bridging fluorides and hard/soft mismatch in d6 and d8 complexes: the case of [Tl(mu-F)3Ru(PPh3)3

[RuCl2(PPh3)3] reacts with thallium(I) fluoride to give either [Tl(mu-F)3Ru(PPh3)3] (1) or [Tl(mu3-F)(mu2-Cl)2Ru2(mu2-Cl)(mu2-F)(PPh3)4] (2) depending on the excess of TlF used. Both 1 and 2 were fully characterized, including X-ray structure determinations. Complex 1 reacts with dihydrogen to form the known ruthenium hydride complex [Ru(H)2(H2)(PPh3)3] upon hydrogenolysis of the Ru-F bond. The reaction of 1 with activated alkyl bromides (R-Br) gives the corresponding alkyl fluorides and the trinuclear complex [Tl(mu3-F)(mu2-F)(mu2-X)Ru2(mu2-Br)(mu2-F)(PPh3)4] (X=Br, F) (3), whose structure closely resembles that of 2. However, 1 is not active as catalyst for the nucleophilic fluorination of R-Br in the presence of thallium fluoride. The effect of the bridging coordination mode of fluoride on the Ru-F bond is discussed in terms of the HSAB principle, which suggests a more general model for predicting the stability of d6 and d8 complexes containing hard ligands (such as fluoro, oxo, and amido).     

Room-temperature regioselective C-H/olefin coupling of aromatic ketones using an activated ruthenium catalyst with a carbonyl ligand and structural elucidation of key intermediates

Mechanistic studies of the ruthenium-catalyzed reaction of aromatic ketones with olefins are presented. Treatment of the original catalyst, RuH(2)(CO)(PPh(3))(3), with trimethylvinylsilane at 90 °C for 1-1.5 h afforded an activated ruthenium catalyst, Ru(o-C(6)H(4)PPh(2))(H)(CO)(PPh(3))(2), as a mixture of four geometric isomers. The activated complex showed high catalytic activity for C-H/olefin coupling, and the reaction of 2'-methylacetophenone with trimethylvinylsilane at room temperature for 48 h gave the corresponding ortho-alkylation product in 99% isolated yield. The activated catalyst was thermally robust and showed excellent catalytic activity under refluxing toluene conditions. (1)H and (31)P NMR studies of the C-H/olefin coupling at room temperature suggested that an ortho-ruthenated complex, P,P'-cis-C,H-cis-Ru(2'-(6'-MeC(6)H(4)C(O)Me))(H)(CO)(PPh(3))(2), participated in the reaction as a key intermediate. Isotope labeling studies using acetophenone-d(5) indicated that the rate-limiting step was the C-C bond formation, not the C-H bond cleavage, and that each step prior to the reductive elimination was reversible. The rate of C-H/olefin coupling was found to exhibit pseudo first-order kinetics and to show first-order dependence on the ruthenium complex concentration.     

Study of ruthenium(II) complexes with anticancer drugs as ligands. Design of metal-based phototherapeutic agents

The reaction of trans-[RuCl(2)(PPh(3))(3)] (Ph = C(6)H(5)) with 2-thio-1,3-pyrimidine (HTPYM) and 6-thiopurines (TPs) produced mainly crystalline solids that consist of cis,cis,trans-[Ru(PPh(3))(2)(N,S-TPYM)(2)] (1) and cis,cis,trans-[Ru(PPh(3))(2)(N(7),S-TPs)(2)]X(2) (X = Cl(-), CF(3)SO(3)(-)). In the case of TPs, other coordination isomers have never been isolated and reported. Instead, the mother liquor obtained after filtration of 1 produced red single crystals of trans,cis,cis-[Ru(PPh(3))(2)(N,S-TPYM)(2)].2H(3)O(+).2Cl(-) (2.2H(3)O(+).2Cl(-)). Selected ruthenium(II)-thiobase complexes were studied for their structural, reactivity, spectroscopic, redox, and cytotoxic properties. Single crystals of 1 contain thiopyrimidinato anions chelated to the metal center via N and S. The Ru[bond]N bonds are significantly elongated for 1 [2.122(2) and 2.167(2) A] with respect to 2 [2.063(3) A] because of the trans influence from PPh(3). The coordination pseudo-octahedron for 2 is significantly elongated at the apical sites (PPh(3) ligands). Solutions of cis,cis,trans isomers in air are stable for weeks, whereas those of 2 turn green within 24 h, in agreement with the respective redox potentials. cis,cis,trans- and trans,cis,cis-[Ru(PH(3))(2)(N,S-TPYM)(2)], as optimized through the DFT methods at the Becke3LYP level are in good agreement with experimental geometrical parameters (1 and 2), with cis,cis,trans being more stable than trans,cis,cis by 3.88 kcal. The trend is confirmed by molecular modeling based on semiempirical (ZINDO/1) and molecular mechanics (MM) methods. Cytotoxic activity measurements for cis,cis,trans-[Ru(PPh(3))(N-THZ)(N(7),S -H(2)TP)(2)]Cl(2) (4) (THZ = thiazole, H(2)TP = 6-thiopurine) and cis,cis,trans-[Ru(PPh(3))(2)(N(7),S-HTPR)2]Cl(2) (5) (HTPR = 6-thiopurine riboside) against ovarian cancer cells A2780/S gave IC(50) values of 17 +/- 1 and 29 +/- 9 microM, respectively. Furthermore, the spectral analysis of HTPYM, TPs, and their Ru(II) complexes in solution shows that intense absorptions occur in the UVA/vis region of light, whereas standard nucleobases absorb in the UVB region.     

介孔有机金属Ru(Ⅱ)非均相催化剂的制备及其催化性能的研究

采用正硅酸乙酯和有机金属Ru(II)硅烷在模板剂P123作用下共聚,合成出有序介孔Ru(II)有机金属催化剂,通过FTIR、NMR、XRD、TEM、N2吸附脱附等对催化剂进行了系统表征;将该催化剂应用于水介质中烯丙醇型异构化反应,结果表明,其具有高活性和高选择性,催化效率接近均相催化剂,且能够多次重复使用,有望在绿色化工中推广应用.     

降冰片烯开环易位聚合反应的分子量及分子量分布控制

使用Grubbs催化剂催化降冰片烯单体进行开环易位聚合反应, 研究了催化剂搅拌溶解时间、聚合反应的溶剂极性和三苯基膦的加入等反应条件对降冰片烯单体ROMP反应分子量及分子量分布的影响, 从而得到降冰片烯ROMP反应的最佳条件.     

微量吸附量热技术在NH2-SBA-15合成中的应用

采用共价接枝法, 以氨丙基-三乙氧基硅烷为氨源, 制备了一系列的NH2-SBA-15催化剂, 通过微量吸附量热技术定量地分析了该催化剂表面碱性中心的强度、数量和分布状态. 实验结果表明, SBA-15在 550 ℃焙烧6 h, 氨基硅源与SBA-15质量比为1.5, 是合成NH2-SBA-15催化剂最适宜的条件. 运用微量吸附量热技术实现了对NH2-SBA-15催化剂合成条件的优化.     

Synthesis and dehydrocoupling reactivity of iron and ruthenium phosphine-borane complexes

The Fe and Ru phosphine-borane complexes CpM(CO)2PPh2 x BH3 (1, M = Fe, 4, M = Ru) were synthesized utilizing the reaction of the phosphine-borane anion Li[PPh2 x BH3] with the iodo complexes CpM(CO)2I. The Fe complex 1 reacted with PMe3 to yield CpFe(CO)(PMe3)(PPh2 x BH3) (2) and CpFe(PMe3)2(PPh2 x BH3) (3) whereas the Ru species 4 gave only CpRu(CO)(PMe3)(PPh2 x BH3) (5). The complexes 1-5 were characterized by 1H, 11B, 13C and 31P NMR spectroscopy, MS, IR and X-ray crystallography for 1 to 4, and EA for 1, 2 and 4. The reactivity of 1 and 4 towards PPh2H x BH3 was explored. Although no stoichiometric reactions were detected under mild conditions, both 1 and 4 were found to function as dehydrocoupling catalysts to afford Ph2PH x BH2 x PPh2 x BH3 in the melt at elevated temperature (120 degrees C). The carbonyl Fe2(CO)9 also functioned as a dehydrocoupling catalyst under similar conditions. Complex 1 and Fe2(CO)9 represent the first reported active Fe complexes for the catalytic dehydrocoupling of phosphine-borane adducts.     

Electron-rich, bulky PNN-type ruthenium complexes: synthesis, characterization and catalysis of alcohol dehydrogenation

Reaction of the electron-rich, bulky tridentate PNN ligand (PNN=2-di-tert-butylphosphinomethyl-6-diethylaminomethylpyridine) with Ru(PPh3)3Cl2 at 65 degrees C resulted in formation of the mononuclear dinitrogen complex (PNN)Ru(Cl)2N2 (minor) and the N2 bridged Ru(II) dinuclear complex [(PNN)Ru(Cl)2]2(micro-N2) (major). These complexes can be interconverted; passing argon through a solution of the mixture resulted in formation of pure . The cationic square-pyramidal [(PNN)Ru(PPh3)Cl]OTf was obtained by the reaction of complex with silver triflate followed by PPh3. Reaction of complex with CO yielded (PNN)Ru(CO)Cl2, which upon reaction with one equiv. of AgBF4 gave the cationic [(PNN)Ru(CO)Cl]BF4. The dicationic [(PNN)Ru(CO)(H2O)(acetone)](BF4)2 was obtained from with 2 equiv. of AgBF4 in acetone solution. Complexes , and were structurally characterized by X-ray crystallography. Complexes and upon addition of an equivalent of base, catalyzed the dehydrogenation of secondary alcohols to the corresponding ketones and primary alcohols to esters in good yields and high selectivity accompanied with the evolution of hydrogen gas.