Catalytic properties of ferrites in oxidation reactions

Catalytic activities of ferrites MFe₂O₄ (M = Cu, Co, Ni, Mg, and Zn) and M¹ _0.5M² _{0 .5}Fe₂O₄ (M¹ = CU; M² = Co, Zn, and Mg) in oxidation of CO and ethylbenzene were investigated, and their dependences on the cation nature were established. Higher activities were observed for catalysts containing ions with variable valence (Cu, Co, and Ni). A correlation between catalytic and adsorption properties of ferrites was found.Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 49–52, January, 1996.     

Catalytic properties of spinel-type complex oxides in oxidation reactions

The catalytic activity of M^IM^II ₂O₃ spinel-type complex oxides (M^I = Cu, Ni, Mn, Zn, Mg, Co, M^II = Co, Cr, Al) in the oxidation of CO and ethylbenzene has been investigated. The Co-containing catalysts were more active than the Cr- and Al-containing catalysts. The nature of the cation influenced the catalytic activity. Higher activities were observed for the catalysts containing two transition elements. A correlation between the catalytic and adsorption properties was established.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1730–1732, October, 1994.     

Weakly bound oxygen in the catalytic CO oxidation and exoemission from complex oxides having a spinel structure

The catalytic activity of complex oxides M^IM^II ₂O₄ (M^I=Cu, Ni, Co, Zn, or Mg; M^II=Mn or Cr) with a spinel structure in the oxidation of CO and the low-temperature (20–400°C) exoemission of negative charges from their surface were investigated. A relationship between the catalytic activity and the emissivity of the systems under study was found. The role of the charged species of weakly bound oxygen in exoemission and oxidative catalysis by the complex oxides is discussed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1618–1621, September, 1997.     

Exoemission and catalytic activity of oxides with perovskite and spinel structures in the oxidation of CO and hydrocarbons

Low-temperature (20—400 °C) exoemission of negative charges from mixed oxides having the perovskite structure M¹M²O₃ (M¹ = La; M² = Co, Mn, Ni) or the spinel structure M¹M² ₂O₄ (M¹ = Cu; M² = Fe, Co, Cr) was studied. The relationship between the catalytic activity in CO, ethylbenzene, and propylene oxidation and the emissivity of the oxides was elucidated. The role of weakly bound oxygen and variable-valence ions in the exoemission and redox catalysis by mixed oxides is discussed.     

Oxidation of CO and hydrocarbons over perovskite-type complex oxides

The catalytic activity of perovskites M^IM^IIO₃ (M^I=La; M^II=Co, Mn, Cr, Al, Ni, and V) and M^ICoO₃ (M=Y, Nd, Sm, and Er) in the oxidation of CO, propylene, and ethylbenzene was investigated. The highest activity was observed for the M^ICoO₃ catalysts with perfect perovskite structure. The nature of the rare-earth element has no influence on the catalytic activity. Deformation of the octahedral coordination of the metal was found for the less active catalysts. The interaction of gases (CO, CO+air) with the catalyst surface was investigated. The more active catalysts adsorb a greater amount of O₂, and the adsorption occurs in the temperature region of the oxidation reaction. The activities of the perovskite- and spinel-type catalysts were compared under similar conditions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 698–701, April, 1999.     

The Solid-State-Grinding Synthesis of Maganese-Modified Cobalt Oxides and Application in the Low-Temperature CO Preferential Oxidation in H<Subscript>2</Subscript>-Rich Gases

A series of MnOx modified cobalt oxides with different atomic molar ratios of Mn/(Mn?+?Co) were prepared by a soft reactive grinding route and investigated for CO preferential oxidation in H₂. It was found that as-prepared Mn-doped cobalt oxides exhibited superior activity compared to the single constituted oxides, other Mn–Co–O mixed oxides synthesized by solution-based route, and other grinding-derived mixed metal oxides M–Co–O (M?=?Zn, Ni, Cu, Fe). The grinding-derived MnCo10 catalyst with Mn/(Mn?+?Co) molar ration of 10% showed the best CO oxidation activity and higher selectivity at low temperature. The surface richness of Co³⁺ was not found as increasing the Mn molar ratio in the present work. However, the incoporation of MnOx with proper amount into Co₃O₄ could produce high surface area, high structure defects, and rich surface active oxygen species, while the ability to supply the active oxygen species was suggested to play the crucial role in promoting the catalytic performance of Mn–Co–O mixed oxides.     

Metallosilicates as supports of Co catalysts for the synthesis of liquid hydrocarbons from CO and H2

The effect of the nature of the silicate support on the activity and selectivity of 10%. Co/M silicate catalysts (where M=Cu, Zn, Ce, Ti, Hf, La, Al, Zr, Co, Mg) in the synthesis of hydrocarbons from CO and H₂ has been established. Co and Zr catalysts have been shown to provide the highest catalytic efficiency. The yield of liquid hydrocarbons in their presence exceeds 120 g m^–3.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 480–482, March, 1993.     

Prussian Blue Type Cocatalysts for Enhancing the Photocatalytic Water Oxidation Performance of BiVO4

The efficiency of photocatalytic overall water splitting reactions is usually limited by the high energy barrier and complex multiple electron-transfer processes of the oxygen evolution reaction (OER). Although bismuth vanadate (BiVO₄) as the photocatalyst has been developed for enhancing the kinetics of the water oxidation reaction, it still suffers from challenges of fast recombination of photogenerated electron-hole pairs and poor photocatalytic activity. Herein, six M^II-Co^III Prussian blue analogues (PBAs) (M=Mn, Fe, Co, Ni, Cu and Zn) cocatalysts are synthesized and deposited on the surface of BiVO₄ for boosting the surface catalytic efficiency and enhancing photogenerated carries separation efficiency of BiVO₄. Six M^II-Co^III PBAs@BiVO₄ photocatalysts all demonstrate increased photocatalytic water oxidation performance compared to that of BiVO₄ alone. Among them, the Co−Co PBA@BiVO₄ photocatalyst is employed as a representative research object and is thoroughly characterized by electrochemistry, electronic microscope as well as multiple spectroscopic analyses. Notably, BiVO₄ coupling with Co−Co PBA cocatalyst could capture more photons than that of pure BiVO₄, facilitating the transfer of photogenerated charge carriers between BiVO₄ and Co−Co PBA as well as the surface catalytic efficiency of BiVO₄. Overall, this work would promote the synthesis strategy development for exploring new types of composite photocatalysts for water oxidation.     

Catalytic oxidation of CO,hydrocarbons, and ethyl acetate over perovskite-type complex oxides

The catalytic activity of M^IM^IIO₃] perovskite-type complex oxides (M^I = La, Y, Nd, Yb; M^II = Co, Mn, Ni) in the oxidation of CO, propylene, benzene, ethylbenzene,o-xylene, and ethyl acetate was investigated. The Co-containing catalysts were shown to be more active in the oxidation than the Mn-containing catalysts. A relationship between the catalytic and adsorption properties was established.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 602–605, April, 1994.     

Catalytic properties of chromites with a spinel structure in the oxidation of CO and hydrocarbons and reduction of nitrogen oxides

The catalytic activity of supported chromites MCr₂O₄/-Al₂O₃ (M = Cu, Co, Mn, Zn, Mg) in the oxidation of CO, C₃H₆, and o-xylene and NO_x reduction was studied. The catalytic activity depends on the calcination temperature and cation nature. The features of the formation of the catalysts were studied by the UV-Vis diffuse reflectance and IR spectroscopies.     

Jahn-Teller-Verzerrungen von Übergangsmetallionen in tetraedrischer Koordination – die Strukturen von Cat[MII(NCS)4] (MII: Co,Ni, Cu) und von Spinellmischkristallen MIICr2O4(MII: Zn?Ni,Zn?Cu,Cu?Ni)

Jahn-Teller Distortions of Transition Metal Ions in Tetrahedral Coordination — The Structures of Cat[M^II(NCS)₄]^II (M^II: Co, Ni, Cu) and of Mixed Crystals M^IICr₂O₄(M^II: Zn? Ni, Zn? Cu, Cu? Ni) of the Spinel Type The structure determination of compounds Cat[M^II(NCS)₄] with Cat = p-xylylenebis(triphenylphosphonium)²⁺ and M^II = Co, Ni, Cu [space group P2₁/n, Z = 4] yielded pseudotetrahedral M^IIN₄-polyhedra, which are distorted by packing forces and vibronic coupling effects of the Jahn-Teller type. Spinel mixed crystals with M^II = Zn? Ni, Zn? Cu, Ni? Cu in the tetrahedral sites exhibit phase transition to tetragonal and o-rhombic structures, induced by cooperative Jahn-Teller interactions. The distortion symmetries of the M^IIN₄ and M^IIO₄ tetrahedra are analysed on the basis of the respective electronic groundstate and the possible Jahn-Teller active vibrational modes.     

Monolithically Integrated Spinel MxCo3−xO4 (M=Co,Ni, Zn) Nanoarray Catalysts: Scalable Synthesis and Cation Manipulation for Tunable Low‐Temperature CH4 and CO Oxidation

A series of large scale M_xCo_3?xO₄ (M=Co, Ni, Zn) nanoarray catalysts have been cost‐effectively integrated onto large commercial cordierite monolithic substrates to greatly enhance the catalyst utilization efficiency. The monolithically integrated spinel nanoarrays exhibit tunable catalytic performance (as revealed by spectroscopy characterization and parallel first‐principles calculations) toward low‐temperature CO and CH₄ oxidation by selective cation occupancy and concentration, which lead to controlled adsorption–desorption behavior and surface defect population. This provides a feasible approach for scalable fabrication and rational manipulation of metal oxide nanoarray catalysts applicable at low temperatures for various catalytic reactions.     

Synthesis,Crystal Structures,and Thermolysis Studies of Heteronuclear Transition Metal Aluminum Alcoholates

Heteronuclear alcoholate complexes [M{Al(OiPr)₄}₂(bipy)] ( 2-M , M = Fe, Co, Ni, Cu, Zn) and [M{Al(OcHex)₄}₂(bipy)] ( 3-M , M = Fe, Co, Ni, Zn) are formed by adduct formation of [M{Al(OiPr)₄}₂] ( 1-M , M = Fe, Co, Ni, Cu, Zn) with 2,2'-bipyridine and transesterification reaction with cHexOAc. According to crystal structure analyses, in 2-M and 3-M the central transition metal ion M²⁺ is coordinated by two chelating Al(OR)₄^– moieties and one bipyridine ligand in an octahedral arrangement. Treating 1-Cu with 2,2'-bipyridine leads to a reduction process, whereat the intermediate [Cu{Al(OiPr)₄}(bipy)₂][Al(OiPr)₄] ( 4 ) could be structurally characterized. During conversion of the iso-propanolate ligands in 1-Cu to cyclohexanolate ligands, Cu²⁺ is reduced to Cu⁺ forming [Cu{Al(O^cHex)₄}(py)₂] ( 5 ). UV/Vis-spectra and results of thermolysis studies by TG/DTA-MS are reported.     

Monolithically Integrated Spinel MxCo3−xO4 (M=Co,Ni, Zn) Nanoarray Catalysts: Scalable Synthesis and Cation Manipulation for Tunable Low‐Temperature CH4 and CO Oxidation

A series of large scale M_xCo_3−xO₄ (M=Co, Ni, Zn) nanoarray catalysts have been cost‐effectively integrated onto large commercial cordierite monolithic substrates to greatly enhance the catalyst utilization efficiency. The monolithically integrated spinel nanoarrays exhibit tunable catalytic performance (as revealed by spectroscopy characterization and parallel first‐principles calculations) toward low‐temperature CO and CH₄ oxidation by selective cation occupancy and concentration, which lead to controlled adsorption–desorption behavior and surface defect population. This provides a feasible approach for scalable fabrication and rational manipulation of metal oxide nanoarray catalysts applicable at low temperatures for various catalytic reactions.     

Extraction of heterometal ruthenium(II) complexes by diphenyl(dibutylcarbamoylmethyl)phosphine oxide from nitrate-nitrite solutions

The synergistic extraction of [RuNO(NO₂)₄OH]^2? by diphenyl(dibutylcarbamoylmethyl)phosphine oxide (L) in the presence of nonprecious metal cations (M²⁺) is studied; the extraction occurs on the account of the formation of heterometal complexes [RuNO(NO₂)₄OHML_m] (M = Zn, Cu, Co, Ni) due to the addition of M²⁺ to ruthenium through the oxygen atoms of the OH and NO₂ groups and the bidentate coordination of L to M²⁺. The extraction constants for Ru/M complexes and ML_n(NO₃)₂ are determined. The variation in the extraction constants with changing M (Co, Zn, Cu > Ni) does not agree with the Irwing-Williams row, unlike the extraction with monodentate PO-containing extractants (Zn > Cu > Co > Ni). The feasibility of ruthenium extraction in the form of Ru/M complexes from complex nitrate-nitrite solutions is demonstrated.     

Catalysis for One‐step Synthesis of Dimethyl Ether from Hydrogenation of CO

In this paper, a new catalyst system Cu‐Mn‐(M)/γ‐Al₂O₃ was developed for the directly synthesis dimethyl ether (DME) from synthesis gas in a fixed‐bed reactor. The catalysts with different n (Cu) : n (Mn) ratios, several promoter M (M is one of Zn, Cr, W, Mo, Fe, Co or Ni) were prepared and tested. The results showed the catalysts have a high conversion of CO and a high DME selectivity. The DME yield in tail gas reached 46.0% (at 63.27% conversion of CO) at 2.0 MPa, 275°C, 1500 h^?1 with the Cu₂Mn₄Zn/γ‐Al₂O₃ catalyst.     

Highly Ordered Mesoporous Cobalt-Copper Composite Oxides for Preferential CO Oxidation

Highly ordered mesoporous cobalt-copper composite oxides were prepared by the nanocasting method with various Co and Cu ratios. The catalysts obtained were characterized by X-ray diffraction, N₂ adsorption–desorption, H₂-temperature programmed reduction, CO-temperature programmed desorption and X-ray photoelectron spectroscopy. All of the catalysts had uniform mesopores and high surface areas. The distinct catalytic properties of these well-characterized mesoporous materials were demonstrated for preferential CO oxidation. It is found that the mesoporous cobalt-copper composite oxides, exhibited the higher catalytic activity for CO conversion and selectivity compared with the mesoporous Co₃O₄ and mesoporous CuO. Among these catalysts the mesoporous cobalt-copper catalyst with Co:Cu molar ratio of 70:30, shows the best catalytic activity and the broadest operating temperature “window” for the high CO conversion in the range of 125–200^oC. The higher catalytic activity was attributed to the higher CO adsorption and oxygen vacancies.     

Catalytic CO Oxidation by O2 Mediated by Noble‐Metal‐Free Cluster Anions Cu2VO3–5−

Catalytic CO oxidation by molecular O₂ is an important model reaction in both the condensed phase and gas‐phase studies. Available gas‐phase studies indicate that noble metal is indispensable in catalytic CO oxidation by O₂ under thermal collision conditions. Herein, we identified the first example of noble‐metal‐free heteronuclear oxide cluster catalysts, the copper–vanadium bimetallic oxide clusters Cu₂VO_3–5^? for CO oxidation by O₂. The reactions were characterized by mass spectrometry, photoelectron spectroscopy, and density functional calculations. The dynamic nature of the Cu?Cu unit in terms of the electron storage and release is the driving force to promote CO oxidation and O₂ activation during the catalysis.     

Noble‐Metal‐Free Single‐Atom Catalysts CuAl4O7–9− for CO Oxidation by O2

The single copper atom doped clusters CuAl₄O_7–9^? can catalyze CO oxidation by O₂. The CuAl₄O_7–9^? clusters are the first group of experimentally identified noble‐metal free single atom catalysts for such a prototypical reaction. The reactions were characterized by mass spectrometry and density functional theory calculations. The CuAl₄O₉CO^? is much more reactive than CuAl₄O₉^? in the reaction with CO to generate CO₂. One adsorbed CO is crucial to stabilize Cu of CuAl₄O₉^? around +I oxidation state and promote the oxidation of another CO. The widely emphasized correlation between the catalytic reactivity of CO oxidation and Cu oxidation state can be understood at the strictly molecular level. The remarkable difference between Cu catalysis and noble‐metal catalysis was discussed.     

K2M(H2P2O7)2·2H2O (M = Ni,Cu, Zn): ortho­rhom­bic forms and Raman spectra

The crystal structures of three isotypic ortho­rhom­bic dihydrogendiphosphates, namely dipotassium copper(II)/nickel(II)/zinc(II) bis­(dihydrogendiphosphate) dihydrate, K₂M(H₂P₂O₇)₂·2H₂O (M = Cu, Ni and Zn), have been refined from single‐crystal data. The M²⁺ and K⁺ cations are located at sites of m symmetry, and the P atoms occupy general positions. These compounds also exist in triclinic forms with very similar structural features. The structures of both forms are compared, as well as the geometry of the MO₆ octa­hedron, which is considerably elongated towards the water mol­ecules for M = Ni and Cu. Such elongation has not been observed among the other representatives of the family. A Raman study of the whole series K₂M(H₂P₂O₇)₂·2H₂O (M = Mn, Co, Ni, Cu, Zn and Mg) is reported.