Long-range effects on palladium deposited on Pt(1 1 1)

Two-dimensional long-range effects have been pointed out electrochemically for palladium adlayers on Pt(1 1 1) in the absence of anion specific adsorption. The observation of these effects requires well ordered electrode substrates. In this way, the characteristic features are not observed on stepped electrodes with 20 atoms wide terraces. The formation of a homogeneous adlayer is also required and the effects are pointed out only when the palladium coverage is close to the completion of the full monolayer.     

Oxygen reduction reaction on the low index planes of palladium electrodes modified with a monolayer of platinum film

Oxygen reduction reaction (ORR) has been studied on the low index planes of Pd modified with a monolayer of Pt (Pt/Pd(hkl)) in 0.1 M HClO₄ with the use of hanging meniscus rotating disk electrode. The activity for ORR on bare Pd(hkl) electrode depends on the surface structure strongly, however, voltammograms of ORR on Pt/Pd(hkl) electrodes do not depend on the crystal orientation. The specific activities of Pt/Pd(hkl) electrodes at 0.90 V (RHE) are higher than that on Pt(1 1 0) which has the highest activity for ORR in the low index planes of Pt. The mass activity on Pt/Pd(hkl) electrode is 7 times as high as a commercial Pt/C catalyst.     

Positive shift of the potential of zero total charge of stepped Pt(1 1 1) electrodes decorated by irreversibly adsorbed bismuth

The value of the potential of zero total charge (pztc) of stepped Pt(1 1 1) electrodes, whose step sites have been blocked by irreversibly adsorbed bismuth, has been determined by means of the CO displacement experiment. It has been observed that the pztc of the decorated surfaces shift positively with respect to that of the substrate stepped surface electrode. In this way the electrode total charge at constant potential diminishes by effect of the adatom adsorption. The oxidation of adsorbed CO takes place at higher potentials on the decorated surfaces, pointing out a direct effect of the pztc shift on their reactivity as electrocatalyzers.     

Electrocatalytic oxidation of sugars on silver-UPD single crystal gold electrodes in alkaline solutions

A highly catalytic system for sugar oxidation in alkaline media is presented, for the first time, in which glucose oxidation takes place at ca. −0.44 V (vs. Ag|AgCl). Modification of Au(1 1 1) single crystal surface by under potential deposition (UPD) was carried out for a variety of metals and catalytic effect for sugar oxidation has been studied in 0.1 M NaOH. UPD of Ag ad-atoms on Au electrodes were of the best catalytic activity compared to other metals (Cu, Co, Ru, Cd, Ir, and Pt, etc.). For aldose type monosaccharide studied (glucose, mannose and xylose) as well as for aldose-containing disaccharides (maltose and lactose), one significant oxidation peak was obtained, however, no significant oxidation current was observed for disaccharides like sucrose. Gluconolactone and mannolactone gave no oxidation current at negative potentials at which glucose was oxidized, indicating no more than two-electron oxidation took place. With Ag ad-atoms coverage of ca. 0.3 monolayer leads to a positive catalytic effect expressed through a negative shift of ca. 0.14 V (glucose case) on the oxidation potential and a slight increase in peak current. At the Au(1 0 0) surface similar results to those at an Au(1 1 1) electrode were also observed.     

Amperometric biosensors based on deposition of gold and platinum nanoparticles on polyvinylferrocene modified electrode for xanthine detection

In this study, new xanthine biosensors, XO/Au/PVF/Pt and XO/Pt/PVF/Pt, based on electroless deposition of gold(Au) and platinum(Pt) nanoparticles on polyvinylferrocene(PVF) coated Pt electrode for detection of xanthine were presented. The amperometric responses of the enzyme electrodes were measured at the constant potential, which was due to the electrooxidation of enzymatically produced H₂O₂. Compared with XO/PVF/Pt electrode, XO/Au/PVF/Pt and XO/Pt/PVF/Pt exhibited excellent electrocatalytic activity towards the oxidation of the analyte. Effect of Au and Pt nanoparticles was investigated by monitoring the response currents at the different deposition times and the different concentrations of KAuCl₄ and PtBr₂. Under the optimal conditions, the calibration curves of XO/Au/PVF/Pt and XO/Pt/PVF/Pt were obtained over the range of 2.5 × 10^?3 to 0.56 mM and 2.0 × 10^?3 to 0.66 mM, respectively. The detection limits were 7.5 × 10^?4 mM for XO/Au/PVF/Pt and 6.0 × 10^?4 mM for XO/Pt/PVF/Pt. The effects of interferents, the operational and the storage stabilities of the biosensors and the applicabilities of the proposed biosensors to the drug samples analysis were also evaluated.     

Preparation and electrocatalytic activity of Rh adlayers on Pt(1 0 0) electrodes: reduction of nitrous oxide

Rhodium adlayers (submonolayer range) have been prepared on Pt(1 0 0) electrodes by electrodeposition from acidic solutions containing an excess of chloride. These Rh/Pt(1 0 0) electrodes give a well-defined voltammetric signal in the hydrogen adsorption region, which gives evidence of a high level of order in the Rh adlayer and allow a reliable estimation of the coverage. The voltammetric behavior of the Rh/Pt(1 0 0) electrodes points to an epitaxial growth with formation of rhodium islands. The well-ordered bimetallic surfaces freshly prepared were tested as electrocatalysts for nitrous oxide reduction and the responses were compared with those of the bulk Pt(1 0 0) and Rh(1 0 0) electrodes. The voltammogram for the bimetallic surface showed well separated N₂O reduction signals for Rh and Pt surface zones. An exceptionally high electrocatalytic activity for the Rh adlayer was found for low coverages. This behavior is explained on the basis of a high activity of the rhodium adatoms in the periphery of the islands.     

Electrochemical deposition of PbTe onto n-Si(1 0 0) wafers

Electrochemical deposition of PbTe from 50 mM Pb(NO₃)₂ + 1 mM TeO₂ + 0.1 M HNO₃ solution onto n-Si(1 0 0) wafers was studied using cyclic voltammetry (CV), chronoamperometry, ex situ SEM, XRD and EDX. Electrochemical behavior of n-Si(1 0 0) electrode in electrolytes 50 mM Pb(NO₃)₂ + 0.1 M HNO₃ and 1 mM TeO₂ + 0.1 M HNO₃ was also studied. No underpotential deposition (UPD) of Pb and Te onto n-Si was observed in the investigated systems indicating weak Pb–Si and Te–Si interactions. Deposition of Pb and Te on n-Si occurred with overvoltage via 3D island growth. Electrosynthesis of PbTe (NaCl-like structure, a = 0.650 nm) takes place due to codeposition of Pb and Te at potentials E > E_{Pb²⁺/Pb⁰} (lead UPD onto tellurium). Cathodic deposition of PbTe onto n-Si(1 0 0) is irreversible – there is no anodic current in the CV curve. Oxidation of PbTe on n-Si is observed only under illumination, when photoelectrons and photoholes are generated in silicon substrate.     

A spectroscopic proof of a surface equilibrium between on top and bridge bonded CO at Pt(1 1 0) in acid solution

According to most of works in the literature, adsorbed carbon monoxide at Pt(1 1 0) electrodes in acid media presents only linear bonded (CO_L) so-called, atop geometry. In the present work, the formation of bridge bonded carbon monoxide (CO_B) is shown via in situ infrared FT spectra, measured on a Pt(1 1 0) electrode covered with 25% CO, in HClO₄ solutions. For the first time, the inter conversion between atop and bridge bonded CO at potentials in the hydrogen adsorption region is reported in acid solution. Band intensity and band center frequency indicate dipole–dipole coupling effects in spite of the low CO total coverage.     

Voltammetric characterization of Pt single crystal electrodes with basal orientations in trifluoromethanesulphonic acid

The behaviour of platinum single crystal electrodes in 0.1 M trifluoromethanesulphonic acid (TFMSA) is reported. The electrode–solution interface depicts the characteristics observed in absence of specific adsorption. At Pt(1 1 0) a small increase of the potential of zero total charge is envisaged. Water splitting region is slightly different than that at perchloric acid solutions thus precluding differences in water adsorption that are reported to be important in electrocatalysis.     

Anion re-adsorption and displacement at platinum single crystal electrodes in CO-containing solutions

Bulk CO oxidation experiments have been carried out in sulphuric and perchloric acid solutions on Pt(1 1 1) and Pt(1 1 0) electrodes under hanging meniscus rotating disk electrode (HMRDE) configuration. The comparison between the two different electrolytic media reveals an important influence of the anion in the oxidation kinetics. Once the adsorbed CO layer has been oxidized after the ignition peak, anions are re-adsorbed on the electrode surface and the presence of these anions affects the stationary currents measured at positive potentials. In the negative-going sweep, adsorbed anions are displaced from the surface when the CO oxidation rate is lower than the corresponding CO adsorption rate. The charge associated to this displacement has been measured at high scan rates and is in agreement with that expected from the CO displacement experiments performed at low potentials.     

The effect of gamma radiation on the stability of miniature reference electrodes

The design and fabrication of four types of miniature reference electrodes and their long term stability in a radiation field are described. Miniature versions of a saturated calomel electrode (MSCE), a silver/silver chloride electrode (MAG), a tungsten/tungsten oxide (MWO) and a copper/copper ion (MCU) electrode were tested in a 10 kGy/h (1 Mrad/h) radiation field for up to 30 days total at 25 and 40 °C. The latter two (MWO and MCU) varied appreciably over time periods of several hours whereas the former two (MSCE and MAG) varied less than 1 mV over periods of 6–8 h and are deemed suitable as reference electrodes for corrosion studies of systems immersed in a radiation field at elevated temperature.     

In situ scanning tunneling microscopy imaging of mercury film electrodeposited on Ir(1 1 1)

In situ scanning tunneling microscopy (STM) was used to examine multilayer Hg film electrodeposited on a well-ordered Ir(1 1 1) single crystal electrode in 0.1 M HClO₄ + 1 mM Hg(ClO₄)₂. Topography STM scans showed that the Ir(1 1 1) – supported Hg film electrode contained well-defined terraces separated by monatomic steps (Δz = 2.3 Å). The STM’s tip could be used to induce local dissolution of the Hg deposit under proper operating conditions and the depth of the etched pit informed directly the thickness of Hg deposit. Although in situ STM imaging with a tungsten tip could not result in atomic structure of bare Hg film in 0.1 M HClO₄, it discerned highly ordered iodine adlayers, represented by a (2 × 8√3)rect – I structure, on the Hg film in solution containing potassium iodide. These STM results suggested that the Hg substrate could have an ordered atomic structure.     

Activity of Pt anode catalyst modified by underpotential deposited Pb in a direct formic acid fuel cell

We characterized the electrocatalytic activity of platinum electrode modified by underpotential deposited lead (PtPb_upd) for a formic acid (HCOOH) oxidation and investigated the influence on the power performance of direct formic acid fuel cells (DFAFC). Based on the electrochemical analysis using cyclic voltammetry and chronoamperometry, PtPb_upd electrode modified by underpotential deposition (UPD) exhibited significantly enhanced catalytic activity for HCOOH oxidation below anodic overpotential of 0.4 V (vs. SCE). Multi-layered PtPb_upd electrode structure of Pt/Pb_upd/Pt resulted in more stable and enhanced performance using 50% reduced loading of anode catalyst. The performance of multi-layered PtPb_upd anode is about 120 mW/cm² at 0.4 V and it also showed a sustainable cell activity of 0.52 V at an application of constant current loading of 110 mA/cm².     

Platinum nanocube catalysts for methanol and ethanol electrooxidation

We prepared Pt nanocube catalyst with about 3.6 nm in size by a polyol process in the presence of PVP as a stabilizer and Fe ion as a kinetic controller. The crystal structure of Pt nanocube with {1 0 0} faces was confirmed by field-emission transmission electron microscopy. In a cyclic voltammogram, we found that the Pt nanocube catalyst showed relatively high ratio of the forward anodic peak current to the reverse anodic peak current resulting in less accumulation of residues on the catalyst. The Pt nanocube catalyst with the edge of stepped {1 0 0} faces was preferable to breakage of CH₃OH and CH₃CH₂OH compared to polycrystalline Pt nanocatalyst. In an electrochemical measurement for methanol and ethanol electrooxidation, the Pt nanocube catalyst showed an excellent catalytic activity, i.e., lower onset potential and higher current density, compared to the polycrystalline Pt nanocatalyst.     

In situ and real-time surface differential diffraction (SDD) study of Cd underpotential deposition on Au(1 1 1)

In situ and real-time surface differential diffraction (SDD) has been used to study the underpotential deposition (UPD) of Cd on Au(1 1 1) in sulfuric acid media. Comparison of SDD results in sulfate electrolytes with and without the presence of Cd²⁺ ions reveals that the surface reconstruction associated with the sulfate adsorption and desorption dominates the structural effect. It is also found that the reconstructed gold surface is stable upon Cd UPD process. In the initial stages of UPD, Cd atoms bind to the surface in bridge sites. This is followed by an adlayer structure with Cd adsorption in threefold hollow sites before Au/Cd intermixing takes place.     

A novel MEA architecture for improving the performance of a DMFC

Direct methanol fuel cell (DMFC) consisting of a double-catalytic layered membrane electrode assembly (MEA) provide higher performance than that with the traditional MEA. This novel structured MEA includes a hydrophilic inner catalyst layer and a traditional electrode with an outer catalyst layer, which was made using both catalyst coated membrane (CCM) and gas diffusion electrode (GDE) methods. The inner catalyst was PtRu black on anode and Pt black on cathode. The outer catalyst was carbon supported Pt–Ru/Pt on anode and cathode, respectively. Thus in the double-catalytic layered electrodes three gradients were formed: catalyst concentration gradient, hydrophilicity gradient and porosity gradient, resulting in good mass transfer, proton and electron conducting and low methanol crossover. The peak density of DMFC with such MEA was 19 mW cm⁻², operated at 2 M CH₃OH, 2 atm oxygen at room temperature, which was much higher than DMFC with traditional MEA.     

DNA surface nanopatterning by selective reductive desorption from polycrystalline gold electrode

Selective electrochemical desorption was employed to pattern polycrystalline gold electrodes with thiolated DNA. The sacrificial thiol 3-mercaptopropionic acid (3-MPA) was selectively desorbed from the crystallographic plane Au(1 1 1) to revealed bare gold domains, surrounded by SAMs of 3-MPA present on the adjacent low index planes Au(1 1 0) and Au(1 0 0). Thiolated DNA sequences were further immobilised on the revealed Au(1 1 1) and the hybridisation efficiency towards complementary and non-complementary sequences evaluated. All derivatisation steps were followed by cyclic voltammetry and faradaic electrochemical impedance spectroscopy. Successful hybridisation resulted in large drops in resistance to charge transfer, attributed to the extension of the DNA surface duplex into solution resulting in an increased diffusion of electrochemical probes to the electrode surface. The results demonstrated the feasibility of the method to generate a DNA sensor able to efficiently discriminate between complementary and non-complementary sequences with good reproducibility.     

Column solid phase extraction and determination of ultra-trace Au,Pd and Pt in environmental and geological samples

A new sorbent based on cysteine modified silica gel (SiG-cys) was prepared and studied for preconcentration and separation of noble metals Au(III), Pd(II), Pt(II), Pt(IV). Its extraction efficiency was examined by batch and column solid phase extraction procedures. Laboratory experiments performed showed that sorbent is characterized with high selectivity, permiting quantitative sorption (93–97%) of noble metals Au, Pd and Pt from acidic media 0.1–2 mol L^? 1 HCl and unsignificant sorption (less than 2%) for common base metals like Cu, Fe, Mn and Zn. The analytes retained on the sorbent are effectively eluted with 0.1 mol L^? 1 thiourea in 0.1 mol L^? 1 HCl and measured by ETAAS or ICP OES under optimal instrumental parameters. The sorbent showed high mechanical and chemical stability and extraction efficiency was not changed after 500 cycles of sorption/desorption. The sorbent was successfully applied in analyticals procedures for preconcentration and determination of Au, Pd and Pt in geological and soil samples. Detection limits (3σ criteria) achieved, depending on the instrumental methods used are: ETAAS (0.005 μg L^? 1 for Au in river and sea water, 0.002 μg g^? 1 for Au in copper ore and copper concentrate); ICP OES (0.03 μg L^? 1 for Pd and 0.06 μg L^? 1 for Pt in river and sea water, 0.006 μg g^? 1 for Pd in copper ore and copper concentrate and 0.002 μg g^? 1 for soluble Pt in soil). The accuracy of the procedures developed was confirmed by added/found method for sea and river water; by the analysis of national certified materials (copper ore and copper concentrate for Au and Pd) and by determination of the sum of soluble Pt(II) + Pt(IV) in spiked soil samples.     

Poly(3,4-ethylene-dioxythiophene) electrode for the selective determination of dopamine in presence of sodium dodecyl sulfate

A novel biosensor using poly(3,4-ethylene dioxythiophene) (PEDOT) modified Pt electrode was developed for selective determination of dopamine (DA) in presence of high concentrations of ascorbic acid (AA) and uric acid (UA) with a maximum molar ratio of 1/1000, and 1/100 in the presence of sodium dodecyl sulfate (SDS). SDS forms a monolayer on PEDOT surface with a high density of negatively charged end directed outside the electrode. The electrochemical response of dopamine was improved by SDS due to the enhanced accumulation of protonated dopamine via electrostatic interactions. The common overlapped oxidation peaks of AA, UA and DA can be resolved by using SDS as the DA current signal increases while the corresponding signals for AA and UA are quenched. The use of SDS in the electrochemical determination of dopamine using linear sweep voltammetry at modified electrode PEDOT/Pt resulted in detecting dopamine at relatively lower concentrations. The DA concentration could be measured in the linear range of 0.5 to 25 μmol L^? 1 and 30 μmol L^? 1 to 0.1 mmol L^? 1 with correlation coefficients of 0.998 and 0.993 and detection limits 61 nmol L^? 1 and 86 nmol L^? 1, respectively. The validity of using this method in the determination of dopamine in human urine was also demonstrated.