Study of ITO Glass Electrode Modified with Iron Oxide Nanoparticles and Nafion for Glucose Biosensor Application

In this study, we report the fabrication of the indium tin oxide (ITO) glass electrode modified with iron oxide nanoparticles (IONPs) and nafion for glucose biosensor applications. The IONPs was synthesized using the precipitation method and functionalized with citric acid (CA) to provide hydrophilic surface and functional group for glucose oxidase (GOx) enzyme immobilization. The structural and morphological studies of CA-IONPs were characterized using X-ray diffractometer (XRD) and transmission electron microscope (TEM). The size of the IONPs measured from TEM image was ∼17 nm. The bioelectrode designated as Nafion/GOx/CA-IONPs/ITO was developed by drop casting of the CA-IONPs, GOx and nafion on the ITO glass. The Nafion/GOx/CA-IONPs/ITO bioelectrode showed good electrochemical performance for glucose detection. The functionalized CA-IONPs acted as the catalyst and help to improve the electron transfer rate between GOx and ITO electrode. In addition, thin nafion film was coated on the electrode to prevent interference and improve chemical stability. The Nafion/GOx/CA-IONPs/ITO bioelectrode showed high sensitivity of 70.1 μAmM^-1cm^-2 for the linear range of 1.0-8.0 mM glucose concentrations.     

Amperometric glucose sensor based on glucose oxidase immobilized on gelatin-multiwalled carbon nanotube modified glassy carbon electrode

We investigated the direct electrochemistry of glucose oxidase (GOx) at gelatin-multiwalled carbon nanotube (GCNT) modified glassy carbon electrode (GCE). GOx was covalently immobilized onto GCNT modified GCE through the well known glutaraldehyde (GAD) chemistry. The immobilized GOx showed a pair of well-defined reversible redox peaks with a formal potential (E⁰′) of ? 0.40 V and a peak to peak separation (ΔE_p) of 47 mV. The surface coverage concentration (Г) of GOx in GCNT/GOx/GAD composite film modified GCE was 3.88 × 10^? 9 mol cm^? 2 which indicates the high enzyme loading. The electron transfer rate constant (k_s) of GOx immobilized onto GCNT was 1.08 s^? 1 which validates a rapid electron transfer processes. The composite film shows linear response towards 6.30 to 20.09 mM glucose. We observed a good sensitivity of 2.47 μA mM^?1 cm^? 2 for glucose at the composite film. The fabricated biosensor displayed two weeks stability. Moreover, it shows no response to 0.5 mM of ascorbic acid (AA), uric acid (UA), acetaminophen (AP), pyruvate (PA) and lactate (LA) which shows its potential application in the determination of glucose from human serum samples. The composite film exhibits excellent recovery for glucose in human serum at physiological pH with good practical applicability.     

A molecular wire modified glassy carbon electrode for achieving direct electron transfer to native glucose oxidase

Here we describe a strategy for achieving direct electron transfer to native glucose oxidase (GOx), an enzyme in which the redox active centre is buried deep within the glycoprotein. To achieve this a glassy carbon electrode is modified with a mixed monolayer of 4-carboxyphenyl and a 20 Å long oligo(phenylethynyl) molecular wire (MW), assembled from the respective aryl diazonium salts. Subsequently GOx is adsorbed to the interface, followed by covalent attachment. The redox chemistry of the active centre of glucose oxidase, flavin adenine dinucleotide, was observed at an E_1/2 of –443 mV (vs. Ag|AgCl). The enzyme was shown to retain its activity. Most importantly, in the absence of oxygen the electrode was still able to biocatalytically turn over glucose at −400 mV, thereby demonstrating that the enzyme was being recycled back to its catalytically active oxidized form from its inactive reduced form. The rate of enzyme turnover was 1.1 s⁻¹.     

Synergistic contributions of multiwall carbon nanotubes and gold nanoparticles in a chitosan–ionic liquid matrix towards improved performance for a glucose sensor

We report an ingenious approach for the fabrication of a promising glucose sensor, GOx/Au/CS–IL–MWNT(SH), that exploits the synergistic beneficial characteristics of multiwalled-carbon nanotubes (MWNTs), gold nanoparticles (AuNPs), chitosan (CS) and room temperature ionic liquid (RTIL). Direct electron transfer between glucose oxidase (GOx) and electrode was achieved. Scanning electron microscopy and atomic force microscopy images of GOx/Au/CS–IL–MWNT(SH) reveal that MWNTs and AuNPs are dispersed in CS–IL matrix. Cyclic voltammetry, impedance spectroscopy and chronoamperometry were used to evaluate the performance of biosensor. The GOx/Au/CS–IL–MWNT(SH) biosensor exhibits a linear current response to glucose concentration (1–10 mM) at a low potential of 0.10 V and precludes interferences from uric acid and ascorbic acid. The GOx/Au/CS–IL–MWNT(SH) biosensor has superior performances over GOx/CS–IL–MWNT(SH).     

Glucose biosensor based on new carbon nanotube-gold-titania nano-composites modified glassy carbon electrode

In this paper, a novel biosensor was prepared by immobilizing glucose oxidase （GOx） on carbon nanotube-gold-titania nanocomposites （CNT/Au/TiO2） modified glassy carbon electrode （GCE）. SEM was initially used to investigate the surface morphology of CNT/Au/TiO2 nanocomposites modified GCE, indicating the formation of the nano-porous structure which could readily facilitate the attachment of GOx on the electrode surface. Cyclic voltammogram （CV） and electrochemical impedance spectrum （EIS） were further utilized to explore relevant electrochemical activity on CNT]Au/TiO2 nanocomposites modified GCE. The observations demonstrated that the immobilized GOx could efficiently execute its bioelectrocatalytic activity for the oxidation of glucose. The biosensor exhibited a wider linearity range from 0.1 mmol L-1 to 8 mmol L^-1 glucose with a detection limit of 0.077 mmol L^- 1.     

Direct electrochemistry of glucose oxidase on a graphite nanosheet–Nafion composite film modified electrode

The direct electrochemistry of glucose oxidase (GOD) immobilized in a modified electrode based on a composite film of exfoliated graphite nanosheets (GNSs) and Nafion has been investigated for the first time. Direct electron communication between GOD and the electrode was achieved with a fast electron transfer rate (12.6 s^?1). In addition, the bioactivity of GOD was retained after immobilization in the composite film and glucose could be determined based on the decrease of the electrocatalytic response of the reduced form of GOD to dissolved oxygen. The resulting biosensor exhibited higher sensitivity (3.4 μA mM^?1). Considering much lower cost of GNSs and ready preparation from graphite, the GNSs-based modified electrode described here is superior to the carbon nanotubes (CNTs)-based modified electrodes and should have wide applications in third-generation biosensors, bioelectronics and electrocatalysis.     

Direct electron transfer reaction of glucose oxidase at bare silver electrodes and its application in analysis

The direct electron transfer reaction of glucose oxidase (GOx) at a bare silver electrode is verified. The electron transfer number n = 2, electron transfer coefficient α = 0.45 and rate constant of the electrochemical reaction K_s = 0.1 s⁻¹ are obtained. This communication presents a multimolecular adsorption model to explain the properties of the direct electron reaction between GOx and bare silver electrodes. The residual valence force may be an important factor to ensure a direct electron transfer reaction on the bare electrode. On the basis of the experimental fact that only biologically active GOx exhibits electrochemical activity in solution, a facile analytical method for analyzing the active GOx concentration is developed. The results determined correspond very well to that of a spectrometric method.     

Direct electron transfer of glucose oxidase on the carbon nanotube electrode

The direct electrochemistry of redox enzymes (or proteins) has received more and more attention[1—9]. These studies developed an electrochemical basis for the investigation of enzyme structure, mechanisms of redox transformations of enzyme molecules and metabolic processes involving redox transformations. From these studies, one can also find potential appli-cations of enzymes in biotechnology. For example, if an enzyme immobilized on electrode surface is ca-pable of the direct electron tra…     

Direct-growth of polyaniline nanowires for enzyme-immobilization and glucose detection

Amperometric enzyme biosensor based on the glucose oxidase (GOx) incorporated polyaniline nanowires (PANI-NWs) on carbon cloth (CC) electrode was demonstrated. The simple, direct-growth of PANI-NWs on CC, via electrochemical polymerization, provides free-standing, template-independent, hence almost (interfacial) defects-free nanostructures. The defect-free interfaces, along with the excellently sensitive organic nanostructured-surface, as evident from its significantly large effective surface area (24 times the geometric area) for redox-sensing, allows efficient entrapment/immobilization and sensing of biomolecules, via rapid electron-transfer at NWs-CC. The GOx-immobilized PANI-NWs/CC, even in initial unoptimized stage, exhibited an excellent sensitivity, ～2.5 mA mM^?1 cm^?2, to glucose, over detection range 0–8 mM, adequate for clinical monitoring of human glucose levels. The report clearly reveals a cost-effective simple system possessing enormous potentiality for biosensors, bioenergy and bioelectronics applications.     

固载于壳聚糖-纳米金复合膜修饰玻碳电极上的葡萄糖氧化酶的直接电化学研究及其生物传感应用

通过将葡萄糖氧化酶固载于壳聚糖-纳米金复合膜内所构置的传感器,实现了葡萄糖氧化酶的直接电化学,并采用循环伏安法与电化学阻抗法对修饰电极进行了表征。研究表明：在除氧缓冲溶液中,葡萄糖氧化酶-壳聚糖-纳米金复合膜修饰电极表现出一对良好的氧化还原峰,这对峰归因于葡萄糖氧化酶的氧化还原,证明葡萄糖氧化酶被成功固载于复合膜内。电子传递速率常数为15.6 s-1,说明葡萄糖氧化酶的电活性中心与电极之间的电子传递很快。将壳聚糖与纳米金相结合还提高了葡萄糖氧化酶在复合膜内的稳定性并保持其生物活性,并可以用于葡萄糖检测。计算得到其表观米氏常数为10.1 mmol·L-1。而且,该生物传感器可以用于血样中葡萄糖含量的测定。     

Ferrocene-modified Fe3O4@SiO2 magnetic nanoparticles as building blocks for construction of reagentless enzyme-based biosensors

A novel amperometric glucose biosensor was developed by entrapping glucose oxidase (GOD) in chitosan (CS) composite doped with ferrocene monocarboxylic acid-modified magnetic core-shell Fe₃O₄@SiO₂ nanoparticles (FMC-AFSNPs). It is shown that the obtained magnetic bio-nanoparticles attached to the surface of a carbon paste electrode (CPE) with the employment of a permanent magnet showed excellent electrochemical characteristics and at the same time acted as mediator to transfer electrons between the enzyme and the electrode. Under optimal conditions, this biosensor was able to detect glucose in the linear range from 1.0 × 10⁻⁵ to 4.0 × 10⁻³ M with a detection limit of 3.2 μM (S/N = 3). This immobilization approach effectively improved the stability of the electron transfer mediator and is promising for construction of biosensor and bioelectronic devices.     

Direct electrochemistry and electrocatalysis of hemoglobin entrapped in composite matrix based on chitosan and CaCO3 nanoparticles

The direct electron transfer between hemoglobin (Hb) and the underlying glassy carbon electrode (GCE) can be readily achieved via a high biocompatible composite system based on biopolymer chitosan (CHT) and inorganic CaCO₃ nanoparticles (nano-CaCO₃). Cyclic voltammetry of Hb-CHT/nano-CaCO₃/GCE showed a pair of stable and quasi-reversible peaks for HbFe(III)/Fe(II) redox couple in pH 7.0 buffer. The electrochemical reaction of Hb immobilized in CHT/nano-CaCO₃ composite matrix exhibited a surface-controlled process accompanied by electron and proton transfer. The electron transfer rate constant was estimated to be 1.8 s⁻¹. This modified electrode showed a high thermal stability up to 60 °C. The apparent Michaelis–Menten constant was calculated to be 7.5 × 10⁻⁴ M, indicating a high catalytic activity of the immobilized Hb toward H₂O₂. The interaction between Hb and this nano-hybrid material was also investigated using FT-IR and UV–vis spectroscopy, indicating that Hb retained its native structure in this hybrid matrix.     

Membrane-less and mediator-free enzymatic biofuel cell using carbon nanotube/porous silicon electrodes

Membrane-less and mediator-free direct electron transfer enzymatic biofuel cells (BFCs) with bioelectrodes comprised of single wall carbon nanotubes (SWNTs) deposited by two methods on porous silicon (pSi) substrates, are reported. In one method the SWNTs were grown by chemical vapor deposition (CVD) and then functionalized with carboxylic groups, and in the second method, pre-synthesized carboxylated SWNTs (c-SWNTs) were electrophoretically deposited on gold-coated pSi. Anodic glucose oxidase (GOx) and cathodic laccase (Lac) were immobilized on the pSi/SWNT substrates to form BFCs in pH 7 phosphate buffer solution. A peak power density of 1.38 μW/cm² (with a lifetime of 24 h) down to 0.3 μW/cm² was obtained for a BFC comprised of c-SWNT/enzyme electrodes in 4 mM glucose solution as fuel, corresponding to normal blood sugar concentration, and air as oxidant. BFCs of this relatively simple architecture have the potential for further optimization of power output and lifetime.     

Electrodeposition of gold nanoparticles at a solid|ionic liquid|aqueous electrolyte three-phase junction

Gold nanoparticles have been electrodeposited on an electrode through electrogeneration at an ITO|AuCl₄^? solution in an ionic liquid|aqueous electrolyte three-phase junction. The electrodeposition was carried out by inverted double-pulse potential chronoamperometry. The direct reduction of AuCl₄^? ions at the electrode is followed by a counterion transfer through the liquid|liquid interface. Contrary to the electrodeposition from a single ionic liquid phase, scanning electron microscopy reveals that the shape of the resulting nanoparticles is highly angular and well-developed with a diameter of 110 ± 30 nm. Catalytic oxidation of glucose on the modified electrode is demonstrated.     

Gold sputtered electrode surfaces enhance direct electron transfer reactions of human cytochrome P450s

We immobilized human cytochrome P450 (CYP), a membrane-bound enzyme, onto both smooth and nanostructured surfaces of gold electrodes via a naphthalene thiolate monolayer film. Rapid electron transfer of CYP with an electrode as a redox partner took place when the enzyme was immobilized onto an electrode surface with nanostructures. This structure was easily prepared by conventional sputtering techniques. A well-defined pair of peaks was observed at ? 0.175 V (vs. SHE) with the largest heterogeneous electron transfer rate constant of 340 s^? 1 for human CYP. The positive redox potential shift of 45 mV upon drug (testosterone) binding was clearly detected, which corresponded to a change in the spin states of heme iron in CYP. The present study showed that gold sputtered surfaces are very useful for direct electron transfer reactions of human CYP isoforms.     

Oxygen transport through laccase biocathodes for a membrane-less glucose/O2 biofuel cell

The present study reports the development of operational membrane-less glucose/O₂ biofuel cell based on oxygen contactor. Glucose oxidation was performed by glucose oxidase (GOx) co-immobilized with the mediator 8-hydroxyquinoline-5-sulfonic acid hydrate (HQS) at the anode, whereas oxygen was reduced by laccase co-immobilized with 2,2′-azinobis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS²⁻) at the cathode. Both enzymes and mediators were immobilized within electropolymerized polypyrrole polymers.Nevertheless, this system is limited by the secondary reaction of O₂ electro-reduction at the anode that reduces the electron flow through the anode and thus the output voltage. In order to avoid the loss of current at the anode in glucose/O₂ biofuel cell, we developed a strategy to supply dissolved oxygen separate from the electrolyte. Porous carbon tubes were used as electrodes and modified on the external surface by the couple enzyme/mediator. The inside of the cathode tube was continuously supplied with saturated dioxygen solution diffusing from the inner to the external surface of the porous tube. The assembled biofuel cell was studied under nitrogen at 37 °C in phosphate buffer at pH 5.0 and 7.0. The maximum power density reached 27 μW cm⁻² at a cell voltage of 0.25 V at pH 5.0 with 10 mM glucose. The power density was twice as high as compared to the same system with oxygen bubbling directly in the cell.     

Electrooxidation of insulin at silicon carbide nanoparticles modified glassy carbon electrode

For the first time silicon carbide nanoparticles (SiC) was used for electrode modification and electrocatalytic oxidation of insulin. In comparison to bare glassy carbon (GC) electrode, the oxidation of insulin at GC electrode modified with SiC nanoparticles occurred at reduced overpotentials. The modified electrode was applied for insulin detection using cyclic voltammetry, differential pulse voltammetry (DPV) and flow injection analysis (FIA). Flow injection amperometric determination of insulin at this modified electrode yielded a calibration curve with the following characteristics; linear dynamic range up to 600 pM, sensitivity of 710 pA pM^?1 cm^?2 and detection limit of 3.3 pM. In addition interference effect of the electroactive existing species (uric acid, glucose, lactic acid, l-cysteine and cholesterol) was diminished and for ascorbic acid eliminated by covering the surface of modified electrode with nafion film. This electrode shows many advantages as an insulin sensor such as simple preparation method without using any specific electron transfer mediator or specific reagent, high sensitivity, excellent catalytic activity, short response time, long term stability and remarkable antifouling property toward insulin and its oxidation product. Sensitivity, detection limit and antifouling properties of this insulin sensor are better than all of the reports in the literature for insulin detection at physiological pH solutions.     

High performance bioanode based on direct electron transfer of fructose dehydrogenase at gold nanoparticle-modified electrodes

The direct electron transfer reaction of fructose dehydrogenase (FDH) from Gluconobacter sp. on alkanethiol-modified gold nanoparticles (AuNPs) was examined. AuNP-modified electrodes were simply fabricated by depositing citrate-reduced gold nanoparticles onto a gold electrode and carbon fiber paper and then covering the surface with a self-assembled monolayer of alkanethiols. The immobilization of AuNPs provided a large effective surface area for the adsorption of FDH. Catalytic oxidation currents based on the direct electron transfer reaction of FDH were observed from a potential about ?100 mV (vs. Ag/AgCl, 3 M NaCl) in the presence of d-fructose without a mediator. The current density reached as high as 14.3 ± 0.93 mA/cm² (at +500 mV), which was achieved in the presence of 200 mM d-fructose by immobilization of FDH on 2-mercaptoethanol-modified AuNP/carbon fiber paper electrodes.     

Direct electrochemistry study of glucose oxidase on Pt nanoparticle-modified aligned carbon nanotubes electrode by the assistance of chitosan–CdS and its biosensoring for glucose

Aligned carbon nanotubes (ACNTs) electrode has been developed for the direct protein electrochemistry and enzyme-biosensor study involving two types of nanoparticles. Pt nanoparticles (Pt_nano) were electro-modified on the ACNTs’ each tube, greatly increasing the electrode surface area for locating protein and also its electronic transfer ability. Glucose oxidase (GOD) with chitosan (CS) and CdS nanoparticles electrochemically coated on each tube of ACNTs–Pt_nano by the electrodeposition reaction of CS when pH value passing its pKa. The CdS nanoparticles between ACNTs electrode and GOD have stimulated the GOD’s direct electron transfer during its redox reaction of FAD/FADH₂. The CS–GOD–CdS/ACNTs–Pt_nano electrode also offer sensitive response to the substrate of glucose with detection limit of 46.8 μM (S/N = 3) and apparent Michaelis–Menten constant of 11.86 mM.     

Mediated electron transfer with P450cin

P450cin stereoselectively hydroxylated its natural substrate 1,8-cineole to 2β-hydroxy-1,8-cineole in an electrochemical cell which allowed for substitution of the natural cofactor NADPH by artificial redox mediators. Cobalt sepulchrate, phenosafranine, safranine T, FAD and FMN enabled artificial electron transfer from the platinum electrode to P450cin via the redox partner protein cindoxin. The highest product formation, 6.50 ± 0.60 nmol (product) nmol (P450)^?1 min^?1 cm^?2, was achieved using cobalt sepulchrate. Surprisingly, phenosafranine and safranine T enabled electron transfer even in the absence of NADPH, cindoxin, and cindoxin reductase, thereby illustrating that none of the natural redox partners is needed for product formation.