反应型二烷基脲凝胶剂及有机溶剂的室温凝胶化研究

通常制备有机分子凝胶是在高温下溶解凝胶剂,凝胶剂分子在冷却过程中进行自组装并使有机溶剂凝胶化。该方法限制了某些低沸点溶剂的凝胶化。利用甲苯二异氰酸酯与烷基胺的高反应活性,制备了三种不同烷基链长的反应型凝胶剂甲苯–2, 4–二（N, N’ –烷基）脲。这种反应型凝胶剂能以较低的浓度在室温下使某些芳香族和卤代烃溶剂中形成热可逆的有机分子凝胶。不同烷基链长的亲溶剂作用以及溶剂性质对有机分子凝胶的形成有较大影响。场发射扫描电镜表明这种反应型凝胶剂在有机溶剂中自组装形成纤维状三维网络结构。烷基链长度不同,形成的纤维状聚集体的形态也不同。红外光谱（FT-IR）和核磁共振波谱（1H-NMR）研究表明分子间氢键作用是这种凝胶剂自组装的驱动力。通过X射线衍射（XRD）和分子模拟推测了其聚集体的结构形态。     

Phase transfer of large gold nanoparticles to organic solvents with increased stability

In this paper, we describe a new procedure to phase transfer large gold nanoparticles (diameters > 45 nm) from aqueous solution to organic solvents. This is accomplished using a covalent amide coupling reaction that incorporates dicyclohexylamine (DCHA) headgroups on the surface of mercaptoacetic acid (MAA) functionalized gold nanoparticles. Gold nanoparticles are first synthesized in aqueous solution by the citrate-reduction method, and nanoparticle size is controlled by the molar ratio of the reducing agent (sodium citrate) and the gold precursor (KAuCl4). MAA is then adsorbed to the surface of the gold nanoparticles followed by an amide-coupling reaction to covalently attach DCHA to the surface-immobilized MAA. The bulky dicyclohexyl groups entropically stabilize gold nanoparticles in organic solvents. This procedure was used to reliably transfer gold nanoparticles with diameters between 45 and 100 nm from aqueous solution to organic solvents such as dimethyl sulfoxide and chloroform.     

Study of types and mixture ratio of organic solvent used to dissolve polymers for preparation of drug-containing PLGA microspheres

The effects of the types and the ratios of various organic solvents used as a mixtures to dissolve poly (lactide-co-glycolide) (PLGA) by using a solvent evaporation method, a technique used to prepare polymer particles, were carefully studied in order to investigate their advantages in developing drug delivery system (DDS) formulations for the prepared microspheres. The particle size and drug loading efficiency of drug-containing PLGA microspheres were found to be dependent on the types of solvent used due to the interfacial tension between the organic solvent and water phase. The drug loading efficiency of monodisperse microspheres prepared by using a membrane emulsification technique employing organic solvents and high interfacial tension for dissolving the PLGA was increased in a controlled manner. The organic solvents with high interfacial tension in the water phase used for the preparation of polymer particles by means of the solvent evaporation method were found to be suitable in terms of improvement in the properties of DDS formulations.     

Synthesis and decoloration capacity of well-defined and PMMA-grafted palygorskite nanocomposites

Structurally well-defined PMMA-grafted palygorskite nanoparticles were prepared by modifying the surface of palygorskite nanoparticles with initiators for reverse atom transfer radical polymerization (reverse ATRP) and by using these initiator-modified nanoparticles as macroinitiators. Reverse ATRP from palygorskite nanoparticles was then performed to attach well-defined polymer on to an inorganic core. It has been found that the dispersibility of palygorskite particles in organic solvents is significantly improved by grafting polymers onto the surface of palygorskite particles. The polymer-grafted palygorskite nanoparticles possess excellent decoloration capacity in organic solvents.     

己二酸二酯原位功能化SiO2稳定Pickering乳液的相反转研究

研究了原位改性SiO₂稳定的己二酸二酯-水体系的乳液相反转特性, 探究了不同己二酸二酯分子对SiO₂的功能化改性能力. 研究发现, 己二酸二酯的烷基链长对乳化行为有重要影响, 长分子链二酯倾向于形成O/W乳液, 而短分子链二酯则倾向于形成W/O型乳液. 结果表明, 短分子链的己二酸二酯对SiO₂粒子的原位功能化改性效果更好, 其原因在于短分子链的己二酸二酯空间位阻较小, 酯基与Si—OH形成氢键能力较强. 改性SiO₂的红外光谱证明了SiO₂表面不同己二酸二酯的数量变化. 碱性条件下乳液稳定特性再次证实了所提出的机理.     

Synthesis of gold nanoparticles by reduction of HAuCl4 under UV irradiation

Gold nanoparticles were prepared in surfactant solutions by reduction of HAuCl₄ under UV irradiation without adding extra reductants or other organic substances. The effect of the structure and the property of surfactant on the size and the optical properties of prepared gold nanoparticles were studied. It was found that the longer the alkyl chain of the surfactant, the larger gold particles are obtained. On the other hand, lengthen the geminis spacer benefits the formation of smaller gold particles. The formation of adduct micelles composed of the charged surface active portion of the surfactant molecule and the (Au^IIICl₄)⁻ ion in cationic surfactant solution serves as the gold source and favors the formation of gold particles with larger sizes. While the repulsion between the (Au^IIICl₄)⁻ ion and the negative charged surface of anionic surfactant micelle is in favor of the formation of gold nanoparticles with smaller sizes. The nonionic surfactants can also assist the formation of dispersed gold nanoparticles.     

Influence of solvents on the conformational order of C18 alkyl modified silica gels

The influence of solvents on the conformational order of C(18) alkyl modified silica gels is studied by means of variable temperature FTIR spectroscopy. Symmetric and anti-symmetric CH(2) stretching modes were utilized for getting qualitative information about the changes in alkyl chain conformational order as a function of both protonated and perdeuterated solvents. It was found that interaction between the C(18) alkyl modified silica gels and the mobile phase results in pronounced changes of the alkyl chain conformational order. Furthermore, it was observed that some perdeuterated solvents exhibit isotope effects, which again is reflected by a different alkyl chain conformational order as compared to the corresponding stationary phases with protonated solvents.     

Fiber-like Gold Particles Prepared in Cationic Micelles by UV Irradiation: Effect of Alkyl Chain Length of Cationic Surfactant on Particle Size

Fiber-like gold particles were prepared by irradiation of HAuCl(4) solutions at 253.7 nm in the presence of alkyltrimethylammonium chlorides (C(n)TAC: n=10, 12, 14, and 16). Fiber-like gold particles were obtained above a threshold concentration of C(n)TAC. The length of fiber-like gold particles increases with increasing alkyl chain length of C(n)TAC. Copyright 2001 Academic Press.     

Effect of alkanethiol chain length on gold nanoparticle monolayers at the air-water interface

In this study, we report the effects of the alkyl chain length on alkanethiol-capped gold nanoparticle Langmuir films. Gold nanoparticles (2-3 nm) capped with C(n)H(2n+1)SH (n = 5-12, 14-16, 18) were prepared via a two-phase synthesis. The films were sampled by Langmuir-Schaefer horizontal transfer at various points in the pressure-area isotherm and monitored with transmission electron microscopy. Changes in surface pressure, temperature, and alkyl chain length did not lead to observable differences in the mesoscale film morphology. Pressure-area isotherms at 22 °C, however, revealed that the work of compression and the collapse pressure are directly dependent on alkyl chain lengths of 14 carbons or greater. Variable temperature isotherms suggest that the work of compression is strongly affected by the phase state (i.e., crystalline vs liquid-like) of the gold-thiolate self-assembled monolayer (SAM) capping the nanoparticles.     

偶氮苯自组装单分子膜中长程电子转移机理

利用自组装技术在金电极表面构造了具有不同前端健长度偶氮苯功能化的单分子膜体系：Au／S（CH2）nNHCO-N＝N-OCH2CH3（n＝2，3，4，6）．研究结果表明，仍氮苯到金电极的表现电子转移速率随它们之间的距离长度的增加而呈指数性的下降趋势．基于Marcus电子隧穿理论，得到了此自组装膜体系的长程电子隧穿系数ρ＝（1．35±0．2）／CH2在和可逆电活性分子自组装膜体系及理论计算相比较的基础上，从偶氮苯分子自组装膜结构与电子转移过程的关系角度对这一结果进行了分析和说明．     

Synthesis of alkyl-branched main chain copolyimides and their effect on the pretilt angles of liquid crystal alignment

Three series of copolyimides containing long alkyl branches were synthesized using the twostep method via poly(amic acid) precursors and chemical imidization. Most of the copolyimides prepared are soluble in polar organic solvents. Good liquid crystal alignment was achieved by buffing the copolyimide films spin-coated onto indium tin oxide glass substrates. The measured liquid crystal pretilt angles range from 0.16° to 15.54°. The Titan simulation program was used to calculate the dipole of each dianhydride structure and correlate with the observed pretilt angles. Main chain copolyimides with a long alkyl side chain, small dipole, and linear, symmetric and rigid core structures are favourable for generating large pretilt angles.     

Facile fabrication of amphiphilic gold nanoparticles with V-shaped brushes from block copolymers with a trithiocarbonate group as the junction

Amphiphilic gold nanoparticles grafted with V-shaped brushes (Au-V-brushes) were prepared by grafting a polystyrene-b-poly(ethylene oxide) (PS-b-PEO) block copolymer with a trithiocarbonate group as the junction to the Au surface. The obtained Au-V-brushes were subjected to solubility test and UV-vis, FT-IR, TEM and DLS characterizations. It is found that the Au-V-brushes are soluble in both water and organic solvents. In the common solvent DMF, the size of the Au-V-brushes is about 17 nm, whereas in selective solvents (toluene and water) aggregates of 70-90 nm are formed. Phase transfer of the Au-V-brushes from the water phase into the toluene phase occurs upon addition of Na(2)SO(4) into water and the Au-V-brushes can also transfer from the toluene phase to the interface of toluene and water phases after addition of citric acid in the water phase.     

烷基胺作为络合剂制备亲油性纳米银

在烷基胺/油酸/水混合体系中制备出表面包裹的亲油性纳米银颗粒,体系中的烷基胺作为络合剂和稳定剂起到使Ag离子水溶液与油酸互溶的作用,在还原过程中均匀释放出Ag离子,使Ag表面被油酸包裹具有亲油性。在相同反应条件下,分别以环己胺、正丁胺、三乙胺作为络合剂,考察了不同结构的胺对纳米Ag的形成过程以及对纳米Ag的表面性质和形貌的影响,并考察了所得纳米Ag颗粒的热稳定性。结果表明,相同反应条件下,正丁胺和三乙胺比环己胺更适于作为络合剂和稳定剂来制备油酸包裹的亲油性纳米Ag,所制备的纳米Ag颗粒在烷烃等中具有较好的热稳定性。     

Controlling the size of poly(hydroxybutyrate-co-hydroxyvalerate) nanoparticles prepared by emulsification–diffusion technique using ethanol as surface agent

Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBHV) nanospheres and oily nanocapsules were prepared by emulsification–diffusion technique. Controlled particle sizes were obtained employing binary mixtures of solvents (chloroform:ethanol) in the organic phase. Ethanol was chosen because of its dipole–dipole interaction with chloroform and its hydrogen bond with water. The smallest particles (from 253 to 493 nm) were obtained using a mixture of solvents composed of 70% ethanol and 30% chloroform (v/v) in the organic phase, while the largest particles (from 896 to 1568 nm) were obtained using chloroform exclusively. Independently of the organic phase composition, the nanoparticles showed unimodal distributions. Optical microscopy showed that the size of the primary emulsion droplets of the nanosphere formulations decreased with increasing ethanol concentrations in the organic phase. A simple empirical equation was developed correlating the nanoparticle diameters with the surface tension gradient coefficient multiplied by the ethanol molar concentration in the organic phase. The strategy showed that the control of the nanoparticle diameters, using emulsification–diffusion technique, could be achieved by adjusting the surface tension of the organic phase.     

How mobile phase composition and column temperature affect enantiomer elution order of liquid crystals on amylose tris(3-chloro-5-methylphenylcarbamate) as chiral selector

A comprehensive study into the effects of mobile phase composition and column temperature on enantiomer elution order was conducted with a set of chiral rod-like liquid crystalline materials. The analytes were structurally similar and comprised variances such as length of terminal alkyl chain, presence of chlorine, number of phenyl rings, and type of chiral center. Experiments were carried out in polar organic and reversed-phase modes using amylose tris(3-chloro-5-methylphenylcarbamate) immobilized on silica gel as the chiral stationary phase. For all liquid crystals, reversal of elution order of enantiomers was observed based on type of used cosolvent and/or its content in the mobile phase; for some of the liquid crystals a temperature-induced reversal was also observed. Both linear and nonlinear dependencies of natural logarithm of enantioselectivity on temperature were found. Tested mobile phases comprised pure organic solvents and binary and tertiary mixtures of acetonitrile with organic solvents and/or water. Effect of acidic/basic mobile phase additives was also tested. Effect of structure of chiral selector is briefly discussed.     

Organo-soluble porphyrin mixed monolayer-protected gold nanorods with intercalated fullerenes

Organo-soluble porphyrin mixed monolayer-protected gold nanorods were synthesized and characterized. The resulting gold nanorods encapsulated by both porphyrin thiol and alkyl thiol on their entire surface with strong covalent Au-S linkages were very stable in organic solvents without aggregation or decomposition and exhibited unique optical properties different from their corresponding spherical ones. Alkyl thiol acts as a stabilizer not only to fill up the potential space on gold nanorod surface between bulky porphyrin molecules but also to provide space for further insertion of C(60) molecules forming a stable C(60)-porphyrin-gold nanorod hybrid nanostructure.     

疏水作用对光化学和光物理过程的影响II: 不良溶剂中长链水杨酸烷基酯的簇集和荧光光谱的变化

本文报道证明长链分子在不良溶剂中发生簇集的实验事实.长链水杨酸烷基酯在二甲基亚砜-水(DMSO-H2O)和乙二醇-水(EG-H2O)混合溶剂中的荧光光谱分布以及荧光量子产率与短链水杨酸烷基酯的显著不同,这些差别可以用长链分子发生簇集来加以解释.     

Oxidation resistant germanium nanowires: bulk synthesis, long chain alkanethiol functionalization, and Langmuir-Blodgett assembly

A simple method is developed to synthesize gram quantities of uniform Ge nanowires (GeNWs) by chemical vapor deposition on preformed, monodispersed seed particles loaded onto a high surface area silica support. Various chemical functionalization schemes are investigated to passivate the GeNW surfaces using alkanethiols and alkyl Grignard reactions. The stability of functionalization against oxidation of germanium for various alkyl chain lengths is elucidated by X-ray photoelectron spectroscopy. Among all schemes tested, long chain alkanethiols (> or = C12) are found to impart the most stable GeNW passivation against oxidation upon extended exposure to ambient air. Further, the chemically functionalized oxidation-resistant nanowires are soluble in organic solvents and can be readily assembled into close-packed Langmuir-Blodgett films potentially useful for future high performance electronic devices.     

Functional colloidal particles stabilized by layered silicate with hydrophilic face and hydrophobic polymer brushes

In this study, we describe a new strategy for producing narrowly dispersed functional colloidal particles stabilized by a nanocomposite with hydrophilic clay faces and hydrophobic polystyrene (PS) brushes on the edges. This method involves preparation of polymer brushes on the edges of clay layers and Pickering suspension polymerization of styrene in the presence of the nanocomposites. PS brushes on the edges of clay layers were prepared by atom transfer radical polymerization. X‐ray diffraction and thermogravimetric analysis results indicated that PS chains were grafted to the edges of clay platelets. Transmission electron microscope results showed that different morphologies of clay‐PS particles could be obtained in different solvents. In water, clay‐PS particles aggregated together, in which PS chains collapsed forming nanosized hydrophobic domains and hydrophilic clay faces stayed in aqueous phase. In toluene, clay‐PS particles formed face‐to‐face structure. Narrowly dispersed PS colloidal particles stabilized by clay‐PS were prepared by suspension polymerization. Because of the negatively charged clay particles on the surface, the zeta potential of the PS colloidal particles was negative. Positively charged poly(2‐vinyl pyridine) (P2VP) chains were adsorbed to the surface of PS colloidal particles in aqueous solution at a low pH value, and gold nanoparticles were prepared in P2VP brushes. Such colloidal particles may find important applications in a variety of fields including waterborne adhesives, paints, catalysis of chemical reactions, and protein separation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1535–1543, 2009     

Miniemulsion polymerization of styrene using well-defined cationic amphiphilic comblike copolymers as the sole stabilizer

Well-defined, positively charged, amphiphilic copolymers containing long alkyl side chains were used as stabilizers in the miniemulsion polymerization of styrene. The copolymers were prepared by controlled free-radical copolymerization of styrene and vinyl benzyl chloride using either the reversible addition-fragmentation chain transfer method or TEMPO-mediated polymerization. The benzyl chloride moities were modified by two different long alkyl chain tertiary amines (N,N-dimethyldodecyl amine and N,N-dimethylhexadecyl amine) to yield the amphiphilic copolymers with vinylbenzyl dimethyl alkyl ammonium chloride units. Owing to their high structural quality, only a small amount of these copolymers was required to stabilize the latex particles (0.5–2 wt% vs styrene). Moreover, in the absence of any hydrophobic agent, the amphiphilic comblike copolymer preserved the colloidal stability of both the initial liquid miniemulsion and the final latex. Ill-defined, analogous copolymers were synthesized by conventional free-radical polymerization and in comparison, exhibited poor stabilization properties.