Abilities of 1‐(9‐anthrylmethyloxy)‐2‐pyridone and related compounds to initiate radical and cationic photopolymerizations

This study explored the abilities of 1‐(9‐anthrylmethyloxy)‐2‐pyridone and related compounds, which absorb long‐wavelength light (>350 nm), to photochemically initiate radical and cationic polymerizations. It was found that the irradiation of the title compounds initiates the radical polymerization of styrene whereas the cationic polymerization of oxetane proceeds in the presence of these photoinitiators to a negligible extent. The behavior of 9‐anthrylmethyloxyl and amidyl radicals in the photopolymerization process of styrene was discussed based on ¹H NMR, UV, and fluorescence spectral data. In addition, the photoinitiation ability of the anthrylmethyloxyl end group was also investigated by using its model compound. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2859–2865, 2004     

Photoinduced cationic ring‐opening frontal polymerizations of oxetanes and oxiranes

The photoinitiated cationic ring‐opening polymerizations of certain epoxides and 3,3‐disubstituted oxetanes display the characteristics of frontal polymerizations. When irradiated with UV light, these monomers display a marked induction period, during which little conversion of the monomer to the polymer takes place. The local application of heat to an irradiated monomer sample results in polymerization that occurs as a front propagating rapidly throughout the entire reaction mass. For the characterization of these frontal polymerizations, the use of a new monitoring technique, employing optical pyrometry, has been instituted. This method provides a simple, rapid means of following these fast polymerizations and quantitatively determining their frontal velocities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1630–1646, 2004     

A new visible light sensitive photoinitiator system for the cationic polymerization of epoxides

This communication reports the development of an efficient three‐component visible light sensitive photoinitiator system for the cationic ring‐opening photopolymerization of epoxide monomers and epoxide functional oligomers. The photoinitiator system consists of camphorquinone in combination with a benzyl alcohol to generate free radicals by the absorption of visible light. Subsequently, the radicals participate in the free radical chain induced decomposition of a diaryliodonium salt. The resulting strong Brønsted acid derived from this process catalyzes the cationic ring‐opening polymerization of a variety of epoxide substrates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 866–875, 2009     

Azahelicenes as visible light photoinitiators for cationic and radical polymerization: Preparation of photoluminescent polymers and use in high performance LED projector 3D printing resins

In this article, novel azahelicenes (AZs) were synthesized and proposed as high performance visible light photoinitiators for both the free radical polymerization of acrylates and the cationic polymerization (CP) of epoxides upon visible light exposure using Light Emitting Diodes (LEDs) @405, @455, and @470 nm. Excellent polymerization initiating abilities are found and high final conversions were obtained. Remarkably, an exceptional long lifetime photoluminescence property of the polymer films was observed when synthesized in presence of AZs. A full picture of the involved chemical mechanisms is given. AZs being high performance photoinitiators, their use in new cationic LED 3D printing resins will be also presented, that is, the cationic process upon LED projector @405 nm can be useful to reduce the shrinkage usually observed for radical polymerization. LED projector printing is very interesting compared to laser writing as this technology projects the profile of an entire layer of a 3D object at one time. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1189–1199     

Free‐radical‐promoted cationic photopolymerization under visible light in aerated media: New and highly efficient silane‐containing initiating systems

New systems for the visible‐light‐induced polymerization of cationic resins working through a free‐radical‐promoted process are presented. They are based on a photoinitiator (camphorquinone, isopropylthioxanthone, Eosin), a silane, and a diphenyl iodonium salt, the new compound being the silane. The overall efficiency is strongly affected by the silane structure. The rates of polymerization and final percent conversion are noticeably higher than those obtained in the presence of already studied reference systems. Moreover, contrary to previously investigated free‐radical‐promoted cationic polymerizations, oxygen does not inhibit the process and an unusual enhancement of the polymerization kinetics is found in aerated conditions: such an observation seems to have never been reported so far. The excited state processes and the role of oxygen as revealed by laser flash photolysis are discussed. The particular behavior of the silyl radicals is outlined. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2008–2014, 2008     

Supramolecular diaryliodonium salt‐crown ether complexes as cationic photoinitiators

Diaryliodonium salts spontaneously form crystalline 1:1 supramolecular complexes at room temperature in good to excellent yields with 18‐crown‐6 ether and its cyclohexano‐ and benzo‐substituted analogs. The complexes were characterized using IR, UV, MS, ¹H, and ¹³C‐NMR spectroscopy and by single crystal X‐ray crystallography. The analytical data obtained were consistent with a structure in which the positively charged iodine atom of diaryliodonium cation is positioned above and over the center of the crown ether ring with the positively charged iodine atom coordinated to the crown ether oxygen atoms. The diaryliodonium salt‐crown ether complexes are photosensitive and were used to carry out the photoinitiated cationic polymerizations of a number of mono‐ and difunctional monomers. During irradiation with UV light, the supramolecular complexes undergo photolysis with the generation of a Brønsted acid and with the concomitant release of the crown ether. When used as photoinitiators, the crown ether that is released markedly influences the kinetics of the subsequent cationic polymerization of the monomer. Further studies demonstrated that the photolysis of diaryliodonium salt‐crown ether supramolecular complexes can be photosensitized using typical‐electron transfer photosensitizers. Free radical‐promoted photosensitization using typical unimolecular free radical photoinitiators such as 2,2‐dimethoxy‐2‐phenylacetophenone also takes place readily. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Radical polymerization of allylbiguanide

Monoallyl compounds are not readily homopolymerized by a conventional free‐radical mechanism. However, we successfully performed the radical polymerization of allylbiguanide hydrochloride in a concentrated acid solution (hydrochloric acid or phosphoric acid) in the presence of a radical initiator at 50 °C. The polymer product was precipitated from the reaction solution through the addition of an excess amount of acetone. The precipitated crude polymer [polyallylbiguanide (PAB)] was then purified by dialysis. PAB was confirmed by elemental analysis, infrared spectroscopy, and ¹H NMR. The molecular weight range of PAB was 10,340–113,200, and PAB exhibited a low polydispersity (weight‐average molecular weight/number‐average molecular weight = 1.04–1.68) by multi‐angle laser light scattering. The polymerization of allylbiguanide was quite sensitive to the protonic concentration of the inorganic acid. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1707–1711, 2004     

Living cationic polymerization of azobenzene‐containing vinyl ether and its photoresponsive behavior

The living cationic polymerization of 4‐[2‐(vinyloxy)ethoxy]azobenzene (AzoVE) was achieved with various Lewis acids in the presence of an ester as an added base. When Et_1.5AlCl_1.5 was used as a catalyst, the living polymerization system was controllable by UV irradiation as a result of cis and trans isomerization of the azobenzene side groups. Furthermore, an initiating system consisting of SnCl₄ and EtAlCl₂ realized fast living polymerization of AzoVE. The polymerization rate of this system was 3 orders of magnitude faster than that obtained with Et_1.5AlCl_1.5. Poly(4‐[2‐(vinyloxy)ethoxy]azobenzene) was soluble in a diethyl ether/hexane mixture at 25 °C but became insoluble upon irradiation with UV light. This phase‐transition behavior was sensitive and reversible upon irradiation with UV or visible light and reflected the change in polarity occurring with cis and trans isomerization of the azobenzene side groups in the polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5138–5146, 2005     

Living cationic polymerization of a coumarin‐substituted vinyl ether and reversible photoinduced crosslinking of the resulting homopolymers and amphiphilic block copolymers

Living cationic polymerization of 4‐methyl‐7‐(2‐vinyloxyethoxy)coumarin (CMVE) was achieved using SnCl₄ in the presence of nBu₄NBr as an added salt at 0 °C. The number‐average molecular weight of the resulting polymers increased in direct proportion to the monomer conversion while retaining relatively low polydispersity. Structural analysis revealed that the resulting polymers carried pendant coumarinyl moieties. These coumarinyl moieties were crosslinked by irradiation with UV light at λ_max = 366 nm, and the crosslinked sites were then cleaved by irradiation with UV light at λ_max = 254 nm. The crosslinking behaviors of the polymers were studied by UV and FTIR spectroscopic measurement. PolyCMVE was soluble in dichloromethane but was found to be insoluble upon UV light irradiation. We also synthesized amphiphilic block polymers bearing coumarinyl moieties by living cationic copolymerization with an amphiphilic vinyl ether. The resulting block polymers were soluble in an aqueous medium and also formed micelle‐like aggregates. Upon UV irradiation of aqueous solutions above the critical micelle concentration, an efficient crosslinking reaction occurred. Photoinduced structural changes of these polymer aggregates in the solution state were further investigated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Radical and cationic photopolymerization: New pyrylium and thiopyrylium salt‐based photoinitiating systems

New thiopyrylium and pyrylium salt‐based photoinitiating systems for visible light induced free radical polymerization (FRP) or free radical promoted cationic polymerization (FRPCP) under visible lights are presented. The reaction mechanisms are investigated by laser flash photolysis and the structure/reactivity trend is discussed. The abilities of two different classes of coinitiators are investigated (thiols/disulfides and silanes). In FRP, upon irradiation with a xenon lamp (λ > 390 nm), the (thio)pyrylium salts in combination with thiols or disulfides lead to very high polymerization rates, compared to the reference eosin Y/methyldiethanolamine system. In FRPCP, silanes are found much better coinitiators: a high efficiency of the photopolymerization under air is noted. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7369–7375, 2008     

Living/controlled copolymerization of acrylates with nonactivated alkenes

The living/controlled copolymerization of methyl acrylate with 1‐alkenes and norbornene derivatives through several radical polymerization techniques has been achieved. These techniques include atom transfer radical polymerization, reversible addition–fragmentation transfer polymerization, nitroxide‐mediated polymerization, and degenerative transfer polymerization. These systems display many of the characteristics of a living polymerization process: the molecular weight increases linearly with the overall conversion, but the polydispersity remains low. Novel block copolymers have been synthesized through the sequential addition of monomers or chain extension. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6175–6192, 2004     

Photoinitiating monomers based on di‐ and triacryloylated hydroxylamine derivatives

The purpose of our study was to design a new class of acrylate‐based monomers with an UV‐cleavable heteroatom bond, offering the possibility to initiate radical polymerization upon irradiation with UV‐light. A method to derive the double bond conversion from the ATR‐IR spectra of the monomers and the cured polymers was employed, that enabled us to calculate the theoretical polymerization heats of the new monomers. Their photopolymerization properties were determined by Photo Differential Scanning Calorimetry. Surprisingly, some of these new compounds exhibited high photoinitiation activity, comparable to well‐established Type II photoinitiator systems like benzophenone/triethanolamine. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 392–403, 2009     

Germanes as efficient coinitiators in radical and cationic photopolymerizations

In this article, germanes are presented as new coinitiators for both radical and cationic photopolymerization processes. For the free radical polymerization process, the newly proposed structures are characterized by efficiencies similar or better than the reference amine. Germyl radicals are also found to be excellent initiators for free radical promoted cationic photopolymerization (FRPCP) of an epoxy resin. The associated reactivity is even better under air. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3042–3047, 2008     

Selectivity in anionic and cationic ring‐opening polymerizations of tetramethyl‐1‐(3′‐trifluoromethylphenyl)‐1‐phenylcyclotrisiloxane and tetramethyl‐1‐[3′,5′‐bis(trifluoromethyl)phenyl]‐1‐phenylcyclotrisiloxane

Anionic and cationic ring‐opening polymerizations of two novel cyclotrisiloxanes, tetramethyl‐1‐(3′‐trifluoromethylphenyl)‐1‐phenylcyclotrisiloxane ( I ) and tetramethyl‐1‐[3′,5′‐bis(trifluoromethyl)phenyl]‐1‐phenylcyclotrisiloxane ( II ), are reported. Anionic ring‐opening polymerization of I or II leads to copolymers with highly regular microstructures. Copolymers obtained by cationic polymerizations of I or II , initiated by triflic acid, have less regular microstructures characteristic of chemoselective polymerization processes. The composition and microstructure of copolymers have been characterized by ¹H and ²⁹Si‐NMR, the molecular weight distributions by GPC, and the thermal properties by DSC and TGA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5235–5243, 2004     

The fast and the curious: High‐throughput experimentation in synthetic polymer chemistry

The application of automated synthetic parallel methods in polymer chemistry is described. A brief overview of all different polymerization techniques that have been used is provided. Furthermore, the equipment and methodologies that were used in our approach for automated parallel polymerization reactions are discussed followed by detailed insight into recent developments on automated cationic ring‐opening polymerization, atom transfer radical polymerization, and emulsion polymerizations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2425–2434, 2003     

Photopolymerization of hybrid monomers: Part I: Comparison of the performance of selected photoinitiators in cationic and free-radical polymerization of hybrid monomers

Photopolymerization of the hybrid monomers: 3,4-epoxycyclohexylmethyl methacrylate (Cyclomer M100) and 2-(2-vinyloxyethoxy)ethyl acrylate (VEEA) was studied by Fluorescence Probe Technique (FPT). Kinetics of cationic and free-radical photopolymerization of the hybrid monomers in the presence of the same molar concentration of various photoinitiators was compared, using UV LEDs as the curing light source. The performance of the following photoinitiators was tested in the cationic photopolymerization: Sylanto 7M-S, Sylanto 7M-P, Speedcure 938, Irgacure 250, HIP, Esacure 1187, and the following photoinitiators were used to induce free radical photopolymerization: Irgacure 184, Irgacure 127, Irgacure 651, Irgacure 907, Irgacure 819 and Speedcure TPO. It was found that, among the cationic photoinitiators, Sylanto 7M-S and Sylanto 7M-P are the most effective photoinitiators of the cationic polymerization for use with 320 nm and 365 nm UV LEDs, while Irgacure 819 and Speedcure TPO perform best in free radical photopolymerization of the hybrid monomers. Some structural factors and parameters affecting the photoinitiators performance are discussed.     

Direct through anionic,cationic, and radical active species: Terminal carbon–halogen bond for “controlled”/living polymerizations of styrene

In this work, we examined the synthesis of novel block (co)polymers by mechanistic transformation through anionic, cationic, and radical living polymerizations using terminal carbon–halogen bond as the dormant species. First, the direct halogenation of growing species in the living anionic polymerization of styrene was examined with CCl₄ to form a carbon–halogen terminal, which can be employed as the dormant species for either living cationic or radical polymerization. The mechanistic transformation was then performed from living anionic polymerization into living cationic or radical polymerization using the obtained polymers as the macroinitiator with the SnCl₄/n‐Bu₄NCl or RuCp^*Cl(PPh₃)/Et₃N initiating system, respectively. Finally, the combination of all the polymerizations allowed the synthesis block copolymers including unprecedented gradient block copolymers composed of styrene and p‐methylstyrene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 465–473     

Synthesis of new graft copolymers containing polyisobutylene by a combination of the 1,1‐diphenylethylene technique and cationic polymerization

The synthesis of macroinitiators for the cationic polymerization of isobutylene via radical polymerization is presented. The 1,1‐diphenylethylene system was used to obtain macroinitiators consisting of 4‐chloromethylstyrene and methyl methacrylate units. The resulting polymers were used for the cationic polymerization of isobutylene, yielding graft copolymers that were characterized by gel permeation chromatography and NMR. The dependence of the molar mass and polydispersity on the temperature and monomer concentration was studied. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3725–3733, 2002     

Evaluation of initiator systems for controlled and sequentially curable free‐radical/cationic hybrid photopolymerizations

Free‐radical/cationic hybrid photopolymerizations of acrylates and epoxides were initiated using a three‐component initiator system comprised of camphorquinone as the photosensitizer, an amine as the electron donor, and a diaryliodonium salt. Thermodynamic considerations revealed that the oxidation potential of the electron donor must be less than 1.34 V relative to SCE for electron transfer with the photoexcited camphorquinone to take place. This electron transfer leads to the production of the active centers for the hybrid polymerization (two radicals and a cation). Further investigation revealed that only a subset of electron donors that meet the oxidation potential requirement resulted in polymerization of the epoxide monomer; therefore, a second requirement for the electron donor (pK_b higher than 8) was established. Experiments performed using a combination of electron donors revealed that the onset of the hybrid system's cationic polymerization can be advanced or delayed by controlling the concentration and composition of the electron donor(s). These studies demonstrate that a single three‐component initiator system can be used to initiate and chemically control the sequential curing properties of a free‐radical/cationic hybrid photopolymerization and is a viable alternative to separate photoinitiators for each type of polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1747–1756, 2005     

The effect of a trithiol and inorganic fillers on the photo‐induced thermal frontal polymerization of a triacrylate

Thermal frontal polymerization is a process in which a localized reaction propagates through an unstirred system by the coupling of the thermal diffusion and the Arrhenius kinetics of an exothermic polymerization. A trithiol was found to affect the front velocity and the time for inducing a front upon exposure to UV light for trimethylolpropane triacrylate polymerization fronts with either kaolin or calcium carbonate filler present. The addition of trithiol and filler both decreased the front velocity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8091–8096, 2008