Surface morphology of spin‐coated molecularly imprinted polymer films

The surface morphology of thin molecularly imprinted polymer films has been studied using atomic force microscopy (AFM). The films were produced by spin coating onto glass substrates and examined as a function of host polymer, imprinting template, casting solvent, spin‐coater rotation speed and post‐production treatment. It was observed that the gross features of such films are template controlled. The fine structure is determined by parameters such as solvent, spin speed or subsequent treatment. The relationship between these observations, polymer–template interactions and the mechanism of film formation in spin coating is discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Studies of photosensitive alignment layer based on ladder‐like polysilsequioxane liquid‐crystal devices using atomic force microscopy/force curve

Atomic force microscopy (AFM)/force curve measurements were used to study the photochemical process of UV‐treated (0, 10, 20, 30 and 60 min) organic thin films that were prepared from azobenzene and cinnamate side‐chain co‐grafted ladder‐like polysilsequioxanes (LPS). The morphological data of the thin films describe the changing process on the surface of the thin film. The statistical results of the adhesion force of the thin films further demonstrate the intermolecular characteristics of the thin films. A photosensitive thin film after UV exposure for 20 min would be a better material with a preferred orientation that can be used to make liquid‐crystal devices. Copyright © 2003 John Wiley & Sons, Ltd.     

High‐refractive‐index thin films prepared from aminoalkoxysilane‐capped pyromellitic dianhydride–titania hybrid materials

High‐refractive‐index aminoalkoxysilane‐capped pyromellitic dianhydride (PMDA)–titania hybrid optical thin films (TP0–TP8) were synthesized and characterized in this study. They were prepared with PMDA, aminopropyltrimethoxysilane, and titanium(IV) isopropoxide via a sol–gel process followed by spin coating and multistep baking. Through adjustments in the concentration and reaction time, the inorganic content in the hybrid thin films could be as high as 59.1 wt %. The Fourier transform infrared results indicated successful bonding between the organic and inorganic moieties. However, residues of the chelating ligands were found in the hybrids with high titania contents, affecting their thermal and optical properties. Field emission scanning electron microscopy results suggested a nanosized domain of the titania segment in the hybrid materials TP0–TP8. An atomic force microscopy study suggested that the hybrid thin films had good planarization. The dispersions of the refractive index and extinction coefficient in the wavelength range 190–900 nm were studied. The refractive indices of the prepared hybrid thin films at 633 nm increased linearly from 1.567 to 1.780 with increasing titania content. However, the Abbe numbers of the hybrid thin films showed an opposite trend. Excellent optical transparence was obtained in the visible region for the prepared hybrid thin films. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3419–3427, 2001     

Ring‐banded spherulites in PCL and PCL/MWCNT solution‐casting films and effect of compressed CO2 on them

The ring‐banded spherulites in poly(ε‐caprolactone) (PCL) solution‐casting films in the absence and presence of multi‐walled carbon nanotube (MWCNT) are studied by atomic force microscopy (AFM), polarized optical microscopy (POM), transmission electron microscopy (TEM), and scanning electronic microscopy (SEM). The results indicate that birefringent ring‐banded spherulites of PCL can grow from solution below 50 °C, and the temperature is much lower than that from pure PCL melt. We also find out that the presence of MWCNT apparently widen the temperature range of forming ring‐banded structure. Furthermore, the mechanism for the ring‐banded structure forming is studied, and it is attributed to the twisting of lamellae crystals, and the driving force is suggested including the deflexion of lamellae bundles. In addition, effect of compressed CO₂ on the morphology of PCL and PCL/MWCNT solution‐casting film is also investigated, and the results reveal that both PCL and PCL/MWCNT films undergo recrystallization with the treatment of compressed CO₂ and accordingly, the related properties can be adjusted. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 784–792, 2009     

Deposition of copper‐doped iron sulfide (CuxFe1−xS) thin films using aerosol‐assisted chemical vapor deposition technique

Copper‐doped iron sulfide (Cu_xFe_1?xS, x = 0.010–0.180) thin films were deposited using a single‐source precursor, Cu(LH)₂Cl₂ (LH = monoacetylferrocene thiosemicarbazone), by aerosol‐assisted chemical vapor deposition technique. The Cu‐doped FeS thin films were deposited at different substrate temperatures, i.e. 250, 300, 350, 400 and 450 °C. The deposited thin films were characterized by X‐ray diffraction (XRD) patterns, Raman spectra, scanning electron microscopy, energy dispersive X‐ray analysis (EDX) and atomic force microscopy. XRD studies of Cu‐doped FeS thin films at all the temperatures revealed formation of single‐phase FeS structure. With increasing substrate temperature from 250 to 450 °C, there was change in morphology from wafer‐like to cylindrical plate‐like. EDX analysis showed that the doping percentage of copper increased as the substrate temperature increased from 250 to 450 °C. Raman data supports the doping of copper in FeS films. Copyright © 2010 John Wiley & Sons, Ltd.     

Pinhole‐free large‐grained atomically smooth Au(111) substrates prepared by flame‐annealed template stripping

High‐quality atomically flat substrates are critical for the analysis and imaging of surface‐mounted ultrathin films and nanostructures. Here we report significant improvement in the preparation of large areas of atomically smooth Au(111) substrates. A thin layer of gold on silicon is flame‐annealed in air and then stripped from the template. The substrates were analyzed with X‐ray diffraction and high‐resolution atomic force microscopy (AFM). In contrast to the previously reported template stripped gold (TSG) substrates, flame‐annealed template stripped substrates reveal no detectable pinholes. The substrate surface is atomically smooth with most grains being larger than 1 µm². The entire procedure requires less than 2 h and uses readily available materials and common laboratory equipment. The resulting substrates can be stored for longer periods of time and then used immediately without need for common cleaning procedures. Evidence is provided that self‐assembled monolayers on these substrates are higher quality than those prepared with previously reported gold substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

Studies of Cu‐doped ZnS thin films prepared by sputtering technique

Radio frequency magnetron sputtering technique has been used to deposit Cu‐doped ZnS thin films on glass and n‐type Si(100) substrates at room temperature. Crystalline structure, surface morphology, and elemental oxidation states have been studied by X‐ray diffraction, field emission scanning electron microscopy, atomic force microscopy, and X‐ray photoelectron spectroscopy. Ultraviolet–visible spectroscopy has been employed to measure the transmittance, reflectance, and absorbance properties of coated films. The deposited thin films crystallize in zinc blende or sphalerite phases as proved by X‐ray diffraction analysis. The intensity of diffraction peaks decreases with increasing the dopant concentrations. The predominant diffraction peak related to (111) plane of ZnS is observed at 28.52° along with other peaks. The peak positions are shifted to higher angles with an increase of Cu concentrations. X‐ray photoelectron spectroscopy studies show that Cu is present in +1 oxidation state. Transmittance, reflectance, and absorbance properties of the deposited films have a slight variation with dopant concentrations. Copyright © 2016 John Wiley & Sons, Ltd.     

Spherulite morphology studies of N‐alkyl chitosan films cast from formic acid solutions

The films of N‐ethyl chitosan were prepared via the solution‐casting technique with formic acid as a solvent. The solutions with different concentrations (35 and 40 wt %) were prepared previously from dilute solution (1 wt %) via evaporating process. The crystalline morphology of these films was investigated by means of polarized optical microscopy and scanning electron microscopy. Normal spherulites with a low growth rate formed in the casting films. The different morphologies of spherulite appeared in the films cast from the solutions with different concentrations. After further crystallizing for a few days, the spherulites were decorated by thousands of needlelike extended‐chain crystals, which had a typical size of ～50 μm (length) × 2～5 μm (width) × 1～2 μm (height) in the central part of the spherulite, but a typical size of ～5 μm (lenght)× 1～2 μm (width) × 1～2 μm (height) in the fringe part of the spherulite. The real concentration for crystallization was determined to be 65–82 wt%. Thus, the crystallization actually appeared in supersaturated solution. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2033–2038, 2003     

The fabrication of layer‐by‐layer mode LaCoO3 film by pulsed laser deposition

The relationship between strain and growth conditions in LaCoO₃ thin film was obtained to control the magnetic‐electric characteristics. The LaCoO₃ thin films on the SrTiO₃ substrates have been achieved by the pulsed laser deposition method, and the reflection high‐energy electron diffraction method (RHEED) was applied to monitor the growth process in situ; the layer‐by‐layer growth mode was discovered. The X‐ray diffraction and atomic force microscopy were applied to the phase analysis, and the layer thickness and the layer‐by‐layer growth mode were uncovered. Compared with the 100‐nm LaCoO₃ thin films, the strain in the layer‐by‐layer ultra thin film was more controllable. The enhanced magnetic properties of the layer‐by‐layer mode ultra‐thin films could be tested in future work.     

Fabrication of photo‐cross‐linked polyethyleneimine‐based barriers for CO2 capture

In this study, first, polyethyleneimine was acrylated and mixed with polyvinyl alcohol solution to prepare photo‐crosslinked polyethyleneimine (PEI)‐based nanofibers by utilizing ultraviolet and electrospinning technique at the same time. For CO₂ permeability testing, same formulations were prepared by using solvent casting technique and exposed to ultraviolet light to have polyethyleneimine‐based membrane films. The chemical structures of the nanofibers were characterized by Fourier transform infrared spectroscopy. The thermal properties of nanofibers were examined by thermal gravimetric analysis and differential scanning calorimeter. The morphology of nanofibers was investigated by scanning electron microscopy. CO₂ permeabilities of samples were also measured. Copyright © 2015 John Wiley & Sons, Ltd.     

Double/single phase segregation and vertical stratification induced by crystallization in all‐crystalline tri/diblock copolymers and homopolymer blends of poly(3‐hexylthiophene) and poly(ethylene glycol)

Distinct stratified and non‐stratified morphologies were developed in poly(3‐hexylthiophene) (P3HT) and poly(ethylene glycol) (PEG)‐based homopolymer blends and diblock and triblock copolymer systems. By applying X‐ray photoelectron spectroscopy, only a double‐percolation mechanism including assembling of P3HT chains into the nanofibers in solution aging process with a marginal solvent like p‐xylene as well as crystallization of PEG phase in the cast thin films resulted in vertical stratification and networked fibrils. In cast thin films whose PEG phase, due to low molecular weight or being constrained between two rigid P3HT blocks in triblock copolymers was not crystallized, a non‐stratified discrete fibrillar morphology was acquired. Crystallization of PEGs in the thin films mainly participated in networking and expelling pre‐organized P3HT fibrils to the film surface. By performing the solution aging step in a good solvent such as o‐dichlorobenzene, the P3HTs remained in a coily‐like conformation, and casting the corresponding thin films reflected the non‐stratified discrete granular and featureless morphologies. Assembling the P3HT chains in the presence of PEG phase in cast films at most led to the low‐crystalline granules instead of highly crystalline nanofibrils. No significant crystallization in either homopolymer blends or block copolymer systems conduced to a featureless morphology with homogeneous distribution of existed materials. The surface morphology and ordering in various morphologies were studied employing atomic force microscopy, grazing incidence X‐ray diffraction, and ultraviolet–visible analyses. Copyright © 2016 John Wiley & Sons, Ltd.     

Molecular orientation of a ZnS‐nanocrystal‐modified M13 virus on a silicon substrate

The surface structure and cast film formation process of a ZnS‐nanocrystal‐modified M13 bacteriophage (ZnS–M13) were investigated. A ZnS–M13 film oriented under the influence of a capillary force was obtained on both single‐crystal and polycrystalline substrates. The film formation process was investigated with atomic force microscopy and scanning electron microscopy. The surface images showed that the degree of orientation of the molecular long axes greatly depended on the direction of force and the concentration of aqueous solutions. Controlling the aqueous solution concentration yielded a highly oriented ZnS–M13 film on an indium tin oxide plate. The ability to control the orientation of virus‐based films may lead to new types of hybrid materials in which the components are organized on several length scales. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 629–635, 2004     

Metal‐conducting polymer interface studied by Kelvin probe microscopy: Au and Al on poly(3‐octyl‐thiophene)

In this work, we report a Kelvin probe microscopy investigation on the structural and electronic properties of gold and aluminum thin films evaporated on poly(3‐octyl‐thiophene) films. Our experimental setup allows us to perform scanning force microscopy (SFM) studies of the same area even if the sample is taken out of the SFM system for different processes (Au and Al evaporation). This allows a detailed study of the effect of adsorbed metal particles on the morphology and electrical properties of polymer thin films at the nanoscale. We found different behavior for both metals in morphology and electrical properties at the interface. These results can contribute to explain what happens at the metal–polymer interface of the devices when the metal contacts are grown. Thereby the observed nanoscale structural changes can be correlated with the overall performance of the fabricated devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1083–1093     

Effect of Surface‐Hydroxylated CdS Nanoparticles on the Morphological Transformation of Polystyrene‐block‐Poly(ethylene oxide) Thin Films

Summary: Polystyrene‐block‐poly(ethylene oxide) (SEO) block copolymer thin films, in which CdS clusters have been sequestered into the PEO domains of the SEO block copolymers, are found to induce the morphological transformation of PEO from cylinders to spheres, as shown by using atomic force microscopy (AFM), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). This transformation is caused by the presence of hydrogen‐bonding interactions between surface‐hydroxylated CdS and PEO, as confirmed by nuclear magnetic resonance (NMR) studies.

Morphological transformation of PEO cylinders into CdS/PEO spheres by hydrogen‐bonding interactions between surface‐hydroxylated CdS and PEO.     

Preparation and characterization of novel polyimide‐silica hybrids

Polyimide‐silica (PI‐SiO₂) hybrids were prepared from a novel polyimide (PI), derived from pyromellitic dianhydride (PMDA), 1,6‐bis(4‐aminophenoxy)hexane (synthesized) and 4,4′‐oxydianiline. SiO₂ networks (5–30 wt%) were generated through sol–gel process using either tetraethylorthosilicate (TEOS) or a mixture of 3‐aminopropyltriethoxysilane‐PMDA‐based coupling oligomers (APA) and TEOS. Thin, free standing hybrid films were obtained from the respective mixtures by casting and curing processes. The hybrid films were characterized using Fourier transform infrared, ²⁹Si nuclear magnetic resonance (NMR), field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray spectrometry and atomic force microscopy (AFM) techniques. ²⁹Si NMR results provide information about formation of organically modified silicate structures that were further substantiated by FE‐SEM and AFM micrographs. Contact angle measurements and thermogravimetric thermograms reveal that the addition of APA profoundly influences surface energy, interfacial tension, thermal stability and the residual char yield of modified hybrids in comparison to those obtained by mixing only TEOS. It was found that reduced particle size, efficient dispersion and improved interphase interactions were responsible for the eventual property enhancement. Copyright © 2012 John Wiley & Sons, Ltd.     

Copoly(peryleneimide)s containing 1,3,4‐oxadiazole rings: Synthesis and properties

New copolyimides containing perylenediimide, oxadiazole and hexafluoroisopropylidene moieties were prepared by one‐step polycondensation reaction in solution at high temperature of aromatic diamines containing preformed oxadiazole ring with a mixture of a dianhydride having a perylene ring and another dianhydride with hexafluoroisopropylidene unit. The thermal stability and glass transition temperatures of these copolyimides were measured and compared with those of related polyimides. The solid polymers were also studied by polarized light microscopy and X‐ray diffraction which revealed a semicrystalline state consisting of face‐to‐face arranged columns of perylenediimide units. The film‐forming ability and properties of the resulting thin films were investigated by using atom force microscopy and scanning electron microscopy which showed that the films were organized into self‐assembled rod‐like structures. The UV‐Vis and photoluminescence properties in solution and in solid state were also investigated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4230–4242, 2010     

Influence of metal electrodes on c‐axis orientation of AlN thin films deposited by DC magnetron sputtering

Nanocrystalline aluminum nitride (AlN) thin films were deposited on two types of metallic seed layers on silicon substrates, (111) textured Pt and (110) Mo, by reactive DC magnetron sputtering at low temperature (200 °C). Both textured films of Pt and Mo promote nucleation, thereby improving the crystallinity and epitaxial growth condition for AlN thin films. The deposited films were examined by X‐ray diffraction, scanning electron microscopy and atomic force microscopy techniques. The results indicated that the preferred orientation of crystallites greatly depends upon the kinetic energy of the sputtered species (target power) and seed layers used. Furthermore, AlN thin films with c‐axis perpendicular to the substrate grew on both types of metal electrodes at all power levels larger than 100 W. By comparing the structural properties and compressive stresses at perfect c‐axis orientation conditions, it is evident that AlN films deposited on (110) oriented Mo substrates exhibited superior properties as compared with Pt/Ti seed layers. Furthermore, less values of compressive stresses (?3 GPa) as compared with Pt/Ti substrates (?7.08 GPa) make Mo preferentially better candidate to be employed in the field of suspended Micro/Nano ‐ electromechanical systems (MEMS/NEMS) for piezoelectric devices. Copyright © 2017 John Wiley & Sons, Ltd.     

Medium energy,heavy and inert ion irradiation of metallic thin films: studies of surface nano‐structuring and metal burrowing

In context to the ion induced surface nanostructuring of metals and their burrowing in the substrates, we report the influence of Xe and Kr ion‐irradiation on Pt:Si and Ag:Si thin films of ~5‐nm thickness. For the irradiation of thin films, several ion energies (275 and 350 keV of Kr; 450 and 700 keV of Xe) were chosen to maintain a constant ratio of the nuclear energy loss to the electronic energy loss (S_n/S_e) in Pt and Ag films (five in present studies). The ion‐fluence was varied from 1.0 × 10¹⁵ to 1.0 × 10¹⁷ ions/cm². The irradiated films were characterized using Rutherford backscattering spectroscopy (RBS), atomic force microscopy (AFM) and scanning electron microscopy (SEM). The AFM and SEM images show ion beam induced systematic surface nano‐structuring of thin films. The surface nano‐structures evolve with the ion fluence. The RBS spectra show fluence dependent burrowing of Pt and Ag in Si upon the irradiation of both ion beams. At highest fluence, the depth of metal burrowing in Si for all irradiation conditions remains almost constant confirming the synergistic effect of energy losses by the ion beams. The RBS analysis also shows quite large sputtering of thin films bombarded with ion beams. The sputtering yield varied from 54% to 62% by irradiating the thin films with Xe and Kr ions of chosen energies at highest ion fluence. In the paper, we present the experimental results and discuss the ion induced surface nano‐structuring of Pt and Ag and their burrowing in Si. Copyright © 2016 John Wiley & Sons, Ltd.     

Sputter‐deposited Ni/Ti double‐bilayer thin film and the effect of intermetallics during annealing

In the present study, a double bilayer of a Ni/Ti thin film was investigated. A nanoscale NiTi thin film is deposited in a Ni–Ti–Ni–Ti manner to form a double‐bilayer structure on a Si(100) substrate. Ni and Ti depositions were carried out by using d.c. and r.f. power, respectively, in a magnetron sputtering chamber. Four types of bilayers are formed by varying the deposition time of each layer (i.e. 15, 20, 25, and 30 min). The as‐deposited amorphous thin films were annealed at 300, 400, 500, and 600 °C for 1 h to achieve the diffusion in between the layers. Microstructures were analyzed using field‐emission scanning electron microscope and high‐resolution transmission electron microscope. It was found that, with the increase in annealing temperature from 300 to 600 °C, the diffusion at the interface and atomic migration on the surface increase. Cross‐sectional micrographs exhibited the interdiffusion between the two‐layer constituents, especially at higher temperatures, which resulted in diffusion patches along the interface. Phase analyses, performed by grazing incidence X‐ray diffraction, showed the formation of intermetallic compounds with some silicide phases that enhance the mechanical properties. Nanoindentation and atomic force microscopy were carried out to know the mechanical properties and surface profiles of the films. The surface finish is better at higher annealing temperatures. It was found that for annealing temperatures varying from 300 to 600 °C, the increase in annealing temperature resulted in a gradual increase in atomic‐cluster coarsening with improved adatom mobility. Copyright © 2016 John Wiley & Sons, Ltd.     

Interplay between H‐Bonding and Alkyl‐Chain Ordering in Self‐Assembly of Monodendritic L‐Alanine Derivatives

This paper reports on the synthesis and self‐organizing properties of monodendrons consisting of L ‐alanine at the focal point and alkyl chains with different length at the periphery. The structures of thin films and monolayers are studied by temperature‐resolved grazing‐incidence X‐ray diffraction and scanning force microscopy. The interplay between H‐bonding and ordering of the alkyl chains results in a rich temperature‐dependent phase behavior. The monodendrons form H‐bonded stabilized clusters with the number of molecules depending on the length of the aliphatic chains and temperature. The clusters play the role of constitutive units in the subsequent self‐assembly. Short alkyl chains allow the material to form thermodynamically stable crystalline phases. The molecules with longer side groups exhibit additional transitions from the crystalline phase to thermotropic columnar hexagonal or columnar rectangular liquid‐crystalline phases. In monolayers deposited on highly ordered pyrolytic graphite, the materials show ordering similar to thin films. However, for the compound bearing hexadecyl chains the affinity of the alkyl groups to graphite dominates the self‐assembly and thereby allows epitaxial growth of a 2D lattice with flat‐on oriented molecules.