Zeolite included Fe(II)Phthalocyanine

The title compound was prepared by treating iron(0) or pentacarbonyl-iron(0) containing Y zeolite with the appropriate complexant. Because of steric hindrance, the phthalocyanine guest molecule, turns out to be encapsulated within the zeolite cavity.     

Determination of Fe(II)-Fe(III) and Fe(III)-Ni(II) by the two-component potentiometric complexometric titration

Summary The two-component complexometric potentiometric titration has been applied to the simultaneous determination of Fe(III) and Fe(II), and of Fe(III) and Ni(II) in solution. In each case the two analytes were determined by reading the end-points directly from the titration curve. The end-points are determined in a sense arbitrarily, but they are repeatable and easy to be detected precisely. However, the apparent (found) analytical results are biased. They are effectively corrected with the use of a set of two calibration equations (uncomplete second degree polynomials), which approximate the relationship between found endpoints and true concentrations of analytes in solution. The regression coefficients in the equations are determined on the basis of titration data obtained for standard solutions whose compositions correspond to a 2² factorial. Permanent address: Department of Analytical Chemistry, Jagiellonian University, Krakow     

CATALASE MIMIC WITH Fe (II) METALLOMICELLE

The effect of Fe (II) metallomicelle as a model of catalase, which was formed by adding surfactants (CTAB, SDS, LSS, Brij35) in Fe (II) -trien complex of molar ratios 1: 500 on the decomposition of hydrogen peroxide was investigated at 20°C and 30°C in pH 10 using KI-color and UV Spectrophotometry. A kinetic model for metallomicellar catalysis was proposed. The association constant of the ternary complex K and the rate constant of the decomposition of hydrogen peroxide k3 were obtained. The results indicate that the metallomicelles making up of Fe (II) metal complex and cationic or nonionic surfactants have obvious catalysis on the decomposition of hydrogen peroxide, but the metallomicelles making up of Fe (II) metal complex and anionic or zwitterionic surfactants have inhibition on this reaction.     

Fe(II)自旋交叉分子材料

自旋交叉配合物具有理想的分子双稳态,可用作新型的热开关、光开关和信息存储器件。本文对近三年来Fe(II)自旋交叉分子材料的重要研究进展进行了综述,主要讨论了转变温度在室温附近的Fe(II)自旋交叉配合物以及具有光致激发自旋态捕获(LIESST)效应和多功能的Fe(II)自旋交叉分子材料,并对Fe(II)自旋交叉分子材料的应用前景作了探讨。     

Trigonal kristallisierende Metall(II)-hexacyanoferrate(II)M2II[Fe(CN)6]

Trigonal Crystallizing Metal(II) Hexacyanoferrates(II) M₂^II[Fe(CN)₆] According to X-ray powder diagrams, Ca₂[Fe(CN)₆], Cd₂[Fe(CN)₆], Zn₂[Fe(CN)₆] · 2 H₂O, Pb₂[Fe(CN)₆] and the firstly described compounds Zn₂[Fe(CN)₆] · 2 NH₃ and Sn₂[Fe(CN)₆] crystallize trigonal containing one formula unit in the unit cell. Ca₂[Fe(CN)₆] and Cd₂[Fe(CN)₆] are belonging to the space group D—P3 1m, the other compounds to D—P3 m1. The latters are described as coordination polymers with a coordination number 4 for Zn and 3 for Sn and Pb, respectively.     

Adsorption behavior of Fe(II) and Fe(III) ions on thiourea cross-linked chitosan with Fe(III) as template

A new type of thiourea cross-linked chitosan with Fe(III) as template (TCCTS template) was synthesized. The adsorption of Fe(II) and Fe(III) on this TCCTS template was studied. The factors affecting adsorption such as pH and contact time were considered. The results showed that the optimum pH value for adsorption was pH = 5.0 and the adsorption equilibrium time was about 60 min. The adsorption isotherms and kinetics were investigated, and the equilibrium data agreed very well with the Langmuir model and the pseudo second-order model could describe adsorption process better than the pseudo first-order model. Results also showed that TCCTS template was a favourable adsorbent for Fe(II) and Fe(III) in aqueous solution.     

Simultaneous determination of Fe(II) and Fe(III) in waters by capillary isotachophoresis

An ITP method for the simultaneous determination of Fe(II) and Fe(III) in waters, based on separation of their EDTA and fluoride complexes, respectively, was developed. The leading electrolyte used consists of chlorides, La(III) as co-counter ion and is buffered with β-alanine to pH = 3.5. The terminating electrolyte contains caproic acid and L-histidine (pH = 4.5). The method was validated and tested with samples of artificial, ground and treated water with good results, comparable to those obtained by other analytical techniques. Fe(II) and Fe(III) up to 20 mg/L were measured with an RSD = 1.4–1.5% and detection and determination limits of 0.8–0.9 and 3.0–3.5 mg/L, respectively. The ITP method can be recommended for routine utilization in hydroanalytical laboratories.     

Liquid crystalline derivatives of bis(tricarbollide)Fe(II)

A series of Schiff bases 2[n] with n = 4, 6, 8, 10, 12, and 18 was prepared by the condensation of 9,9'-diaminobis(tricarbollide)Fe(II) (1b) with appropriate 4-alkoxybenzaldehydes (3[n]). Thermal analysis showed that they form nematic and smectic phases with clearing temperatures above 200 degrees C. Comparative studies of series 2[n] and its organic analogs demonstrated that the effectiveness of bis(tricarbollide)Fe(II) in supporting liquid crystalline phases is between that of benzene and biphenyl for n < or = 18 and lower than that of benzene for n = infinity. The photophysical properties were investigated for the butoxy derivative 2[4] and modeled using ZINDO calculations.     

Fe(III)Fe(III) and Fe(II)Fe(III) Complexes as Synthetic Analogues for the Oxidized and Reduced Forms of Purple Acid Phosphatases

Novel Fe(III)Fe(III) and Fe(II)Fe(III) complexes [Fe(2)(BBPMP)(&mgr;-OAc)(&mgr;-X)](n)() (1, X = OAc(-), n = 1+; 2, X = OH(-), n = 1+; 3, X = OAc(-), n = 0; 4, X = OH(-), n = 0), where BBPMP(3)(-) is the anion of 2,6-bis[(2-hydroxybenzyl)(2-pyridylmethyl)aminomethyl]-4-methylphenol, and OAc(-) is acetate, were prepared in order to provide models for the active site of purple acid phosphatases (PAPs). Complex 1 was obtained by the reaction of H(3)BBPMP with Fe(ClO(4))(2).6H(2)O in methanol and sodium acetate trihydrate under ambient conditions, while complex 3 was synthesized as described for 1, under an argon atmosphere with low levels of dioxygen. 2 was isolated from 1in acetonitrile by a substitution of the bridging acetate group by hydroxide, while 4 was generated in solution during a spectropotentiostatic experiment on 2, under argon. Complex 1, [Fe(III)(2)(BBPMP)(&mgr;-OAc)(2)]ClO(4).H(2)O, has been characterized by X-ray crystallography. Crystal data: monoclinic, space group P2(1)/n, a = 14.863(5) ?, b = 12.315(3) ?, c = 20.872(8) ?, beta = 90.83(3) degrees, Z = 4. IR, M?ssbauer, magnetic, electronic absorption, and electrochemical properties of 1-3 have been investigated, and some of these properties represent a contribution to the understanding of the dinuclear iron center of PAPs. Complexes 2, [Fe(III)(2)(BBPMP)(&mgr;-OAc)(&mgr;-OH)]ClO(4) (lambda(max) = 568 nm/epsilon = 4760 M(-)(1) cm(-)(1)), and 4 [Fe(II)Fe(III)(BBPMP)(&mgr;-OAc)(&mgr;-OH)] (lambda(max) = 516 nm/epsilon = 4560 M(-)(1) cm(-)(1)), constitute good synthetic analogues for the chromophoric site for the oxidized and reduced forms, respectively, of the enzyme.     

Simultaneous determination of Fe(II) and Fe(III) in waters by capillary isotachophoresis

An ITP method for the simultaneous determination of Fe(II) and Fe(III) in waters, based on separation of their EDTA and fluoride complexes, respectively, was developed. The leading electrolyte used consists of chlorides, La(III) as co-counter ion and is buffered with beta-alanine to pH = 3.5. The terminating electrolyte contains caproic acid and L-histidine (pH = 4.5). The method was validated and tested with samples of artificial, ground and treated water with good results, comparable to those obtained by other analytical techniques. Fe(II) and Fe(III) up to 20 mg/L were measured with an RSD = 1.4-1.5% and detection and determination limits of 0.8-0.9 and 3.0-3.5 mg/L, respectively. The ITP method can be recommended for routine utilization in hydroanalytical laboratories.     

Synthesis of monomeric Fe(II) and Ru(II) complexes of tetradentate phosphines

rac-Bis[{(diphenylphosphino)ethyl}-phenylphosphino]methane (DPPEPM) reacts with iron(II) and ruthenium(II) halides to generate complexes with folded DPPEPM coordination. The paramagnetic, five-coordinate Fe(DPPEPM)Cl(2) (1) in CD(2)Cl(2) features a tridentate binding mode as established by (31)P{(1)H} NMR spectroscopy. Crystal structure analysis of the analogous bromo complex, Fe(DPPEPM)Br(2) (2) revealed a pseudo-octahedral, cis-α geometry at iron with DPPEPM coordinated in a tetradentate fashion. However, in CD(2)Cl(2) solution, the coordination of DPPEPM in 2 is similar to that of 1 in that one of the external phosphorus atoms is dissociated resulting in a mixture of three tridentate complexes. The chloro ruthenium complex cis-Ru(κ(4)-DPPEPM)Cl(2) (3) is obtained from rac-DPPEPM and either [RuCl(2)(COD)](2) [COD = 1,5-cyclooctadiene] or RuCl(2)(PPh(3))(4). The structure of 3 in both the solid state and in CD(2)Cl(2) solution features a folded κ(4)-DPPEPM. This binding mode was also observed in cis-[Fe(κ(4)-DPPEPM)(CH(3)CN)(2)](CF(3)SO(3))(2) (4). Addition of an excess of CO to a methanolic solution of 1 results in the replacement of one of the chloride ions by CO to yield cis-[Fe(κ(4)-DPPEPM)Cl(CO)](Cl) (5). The same reaction in CH(2)Cl(2) produces a mixture of 5 and [Fe(κ(3)-DPPEPM)Cl(2)(CO)] (6) in which one of the internal phosphines has been substituted by CO. Complexes 2, 3, 4, and 5 appear to be the first structurally characterized monometallic complexes of κ(4)-DPPEPM.     

Water-activity and double-layer effects on the Fe(II)/Fe(Hg) reaction

The title subject is studied by electrode-kinetic measurements in acetate buffered potassium chloride and magnesium sulphate solutions of varied concentration at 25°C, using literature data for activity and double-layer properties. The results indicate that the Fe(II)/Fe(Hg) reaction occurs by an essentially symmetric (α near 1/2) ferrous-ion transfer (n=2), that this transfer is second order in water-activity dependence, and that it exhibits a smaller than classically expected double-layer effect. No specific interaction appears for any of the ions of the supporting salts. An e.c. reaction scheme is proposed for the Fe(Hg)/Fe(II) electrode in non-complexing aqueous solution.     

Discrete Rh(III)/Fe(II) and Rh(III)/Fe(II)/Co(III) cyanide-bridged mixed valence compounds

The heterotrinuclear complexes trans- and cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) are unprecedented examples of mixed valence complexes based on ferrocyanide bearing three different metal centers. These complexes have been assembled in a stepwise manner from their {trans-III-L(14S)Co(III)}, {cis-VI-L(15)Rh(III)}, and {Fe(II)(CN)(6)} building blocks. The preparative procedure follows that found for other known discrete assemblies of mixed valence dinuclear Cr(III)/Fe(II) and polynuclear Co(III)/Fe(II) complexes of the same family. A simple slow substitution process of [Fe(II)(CN)(6)](4-) on inert cis-VI-[Rh(III)L(15)(OH)](2+) leads to the preparation of the new dinuclear mixed valence complex [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) with a redox reactivity that parallels that found for dinuclear complexes from the same family. The combination of this dinuclear precursor with mononuclear trans-III-[Co(III)L(14S)Cl](2+) enables a redox-assisted substitution on the transient {L(14S)Co(II)} unit to form [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+). The structure of the final cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) complex has been established via X-ray diffraction and fully agrees with its solution spectroscopy and electrochemistry data. The new species [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) and [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) show the expected electronic spectra and electrochemical features typical of Class II mixed valence complexes. Interestingly, in the trinuclear complex, these features appear to be a simple addition of those for the Rh(III)/Fe(II) and Co(III)/Fe(II) moieties, despite the vast differences existent in the electronic spectra and electrochemical properties of the two isolated units.     

DNA affinity cleaving : Sequence specific cleavage of DNA by Distamycin-EDTA - Fe(II) and EDTA-distamycin Fe(II)

The attachment of EDTA· Fe(II) to distamycin changes the sequence specific DNA binding antibiotic into a sequence specific DNA cleaving molecule. We report the synthesis of EDTA-distamycin (ED) which has the metal chelator, EDTA, tethered to the carboxy terminus of the N-methylpyrrole tripeptide moiety of the antiobiotic, distamycin. EDTA-distamycin- Fe(II) (ED)·FeII at 10^-6M concentration efficiently cleaves pBR322 DNA (10^-5M in base pairs) in the presence of oxygen and dithiothreitol (DTT). Using Maxam-Gilbert sequencing gel analyses, we find that ED· Fe(II) affords DNA cleavage patterns of unequal intensity covering two to four contiguous base pairs adjacent to a five base pair site consisting of adenines (A) and thymines (T). The multiple cleavages at each site might be evidence for a diffusible oxidizing species, perhaps hydroxyl radical. The unequal intensity of cleavage on each side of the A + T site permit assignment of major and minor orientations of the tripeptide binding unit. A comparison of the cleavage specificity of ED· Fe(II) with distamycin-EDTA· Fe(II), (DE· Fe(II)) which has EDTA · Fe(II) attached to the amino terminus of the N-methylpyrrole tripeptide, shows DNA cleavage patterns at the same sites but with intensities of opposite polarity. Maxam-Gilbert sequencing el analysis of the DNA cleavage patterns by ED Fe(II) and DE Fe(II) on both DNA strands of a 381 se pair restriction fragment reveals asymmetric DNA cleavage patterns. Cleavage is shifted to the 3' de of each DNA strand. A model consistent with this cleavage pattern indicates one preferred binding te for ED Fe(II) and DE Fe(II) is 3'-TTTAA-5' with the “amino end” of the tripeptide oriented to e 3' end of the thymine rich strand. p]This “DNA affinity cleavage” method which consists of attaching cleaving functions to DNA binding molecules followed by DNA cleavage pattern analyses using Maxam-Gilbert sequencing gels may be a useful direct method for determining the binding site and orientation of small molecules on native DNA.     

New binuclear Mn(II) and Fe(II) complexes supported by 1,4,8-triazacycloundecane

Two new binuclear metal complexes supported by 1,4,8-triazacycloundecane (tacud) are reported. [Fe(2)(tacud)(2)(μ-Cl)(2)Cl(2)] (1) and [Mn(2)(tacud)(2)(μ-Cl)(2)Cl(2)] (2) are isomorphs consisting of bis(μ-chloro) bridged metal centers along with terminal chloro groups and tacud ligands. Both compounds 1 and 2 crystallize in the P1 space group. For 1, a = 7.7321(12) ?, b = 7.8896(12) ?, c = 11.4945(17) ?, α = 107.832(2)°, β = 107.827(2)°, γ = 92.642(2)°, V = 627.85(17) ?(3) and Z = 1. For 2, a = 7.7607(12) ?, b = 7.9068(12) ?, c = 11.6111(18) ?, α = 108.201(2)°, β = 108.041(2)°, γ = 92.118(3)°, V = 636.47(17) ?(3) and Z = 1. Variable-temperature and variable-field magnetic susceptibility studies on 1 indicate the presence of weak ferromagnetic interactions between the high-spin iron(ii) centers in the dimer (J = + 1.6 cm(-1)) and the crystalline field anisotropy of the ferrous ion (D = - 2.8, E = - 0.1 cm(-1)). Variable temperature magnetic susceptometry studies on 2 indicate that weak antiferromagnetic coupling exists between the manganese(ii) centers (J = - 1.8 cm(-1)). Compounds 1 and 2 retain their dinuclearity in weakly coordinating or low polarity solvents, while both become mononuclear in solvents such as methanol.     

Electronic spectra of low-spin bioctahedral Fe(II)−Fe(III) mixed-valence dimers

Moldavian State University. Translated fromZhurnal Struktumoi Khimii, Vol. 36, No. 1, pp. 185–189, January–February, 1995.     

Chemiluminescence flow system for the determination of Fe(II) and Fe(III) in water

A novel chemiluminescence (CL) flow system has been developed for the sequential determination of Fe(II) and Fe(III) in water. Fe(II) was detected by its catalytic effect on the CL reaction between luminol immobilized on an anion exchange resin column and dissolved oxygen; Fe(III) was determined by difference measurement after on-line conversion to Fe(II) in a reducing mini-column packed with Cu plated Zn granules. For both ions, the calibration graph was linear in the range 1 × 10^–9 to 1 × 10^–6 g/mL, and the detection limit was 4 × 10^–10 g/mL. A complete analysis could be performed in 1.5 min with a relative standard deviation of less than 5%. The system could be reused for over 200 times and has been applied successfully to the determination of Fe(II) and Fe(III) in natural water samples. Received: 13 March 1997 / Revised: 3 June 1997 / Accepted: 6 June 1997     

DFT quantum-chemical study of the hydrolysis products of Fe(II) and Fe(III) aqua-complexes

The quantum-chemical DFT calculations of thermodynamic characteristics of the reactions of formation of binuclear dihydroxobridging [Fe(H₂O)₄(μ-OH)₂Fe(H₂O)₄] ⁿ⁺ and oxobridging [Fe(H₂O)₅(μ-O)Fe·(H₂O)₅] ⁿ⁺ (n = 2, 4) cations, the hydrolysis products of cations [Fe(H₂O)₆] ^m+ (m = 2, 3). It is shown that effects of solvation lead to higher energetic stability of the dihydroxobridging binuclear compounds in aqueous solutions.     

Syntheses and characterization of tetrakis(5-tert-butylpyrazole) Fe(II) and Mn(II) complexes. Molecular structure of Fe(Pzt-Bu)4(OTF)2

Dichlorotetrakis(5-t-butylpyrazole)iron (1), dichlorotetrakis(5-t-butylpyrazole) manganese (2), and tetrakis(5-t-butylpyrazole) iron(II) bis(trifluoromethanesulfonate) (3) were prepared and characterized. The crystal structure of 3 was determined from X-ray diffraction data. Complex 3 has a distorted octahedral structure with the two triflate ligands at mutually trans positions. Complexes 1 and 2 are mild catalysts for the selective epoxidation of styrene and norbornylene. In comparison, complex 3 is an efficient catalyst for the epoxidation of norbornylene, but promotes the oxidation of styrene predominantly to benzaldehyde.