Solid‐State Electrochemistry and Electrochemiluminescence of Porous Thin Film of [(2,2′‐Bipyridyl)(4‐(2‐pyrrol‐1‐ylethyl)‐4′‐methyl‐2,2′‐bipyridyl)2]ruthenium(II) Monomer Precipitation

A novel fluorescent porous thin film based on the precipitation of the [(2,2′‐bipyridyl)(4‐(2‐pyrrol‐1‐ylethyl)‐4′‐methyl‐2,2′‐bipyridyl)₂]ruthenium(II) (BF₄)₂ complex (pyr‐Ru) was fabricated by easily spreading 2 µL of pyr‐Ru (1 mM in acetonitrile solution) onto the surface of a platinum electrode and drying it in ambient conditions. The morphology of the resulting pyr‐Ru thin film was characterized by scanning electron microscopy (SEM) and fluorescence microscopy. The coating exhibits fluorescent properties of the ruthenium complex and a porous structure with pore diameters of micrometers. The solid‐state electrochemistry and electrochemiluminescence behaviors of the porous pyr‐Ru thin film were investigated in aqueous solution by cyclic voltammetry and step potential.     

Chiral Bis(oxazoline) Ruthenium Complexes with Bipyridyl‐Type N‐Heteroaromatics: Comparative Stereochemical and Photochemical Characterization of their Λ‐ and Δ‐Diastereomeric Geminate Isomers

Diastereomeric geminate pairs of chiral bis(2‐oxazoline) ruthenium complexes with bipyridyl‐type N‐heteroaromatics, Λ‐ and Δ‐[Ru(L‐ L)₂(iPr‐biox)]²⁺ (iPr‐biox=(4S,4′S)‐4,4′‐diisopropyl‐2,2′‐bis(2‐oxazoline); L‐ L=2,2′‐bipyridyl (bpy) for 1 Λ and 1 Δ, 4,4′‐dimethyl‐2,2′‐bipyridyl (dmbpy) for 2 Λ and 2 Δ, and 1,10‐phenanthroline (phen) for 3 Λ and 3 Δ), were separated as BF₄ and PF₆ salts and were subjected to the comparative studies of their stereochemical and photochemical characterization. DFT calculations of 1 Λ and 1 Δ electronic configurations for the lowest triplet excited state revealed that their MO‐149 (HOMO) and MO‐150 (lower SOMO) characters are interchanged between them and that the phosphorescence‐emissive states are an admixture of a Ru‐to‐biox charge‐transfer state and an intraligand excited state within the iPr‐biox. Furthermore, photoluminescence properties of the two Λ,Δ‐diastereomeric series are discussed with reference to [Ru(bpy)₃]²⁺.     

Alternating π‐conjugated copolymer of dithiafulvene with 2,2′‐bipyridyl units

A π‐conjugated polymer containing a dithiafulvene unit and a bipyridyl unit was prepared by cycloaddition polymerization of aldothioketene derived from 5,5′‐diethynyl‐2,2′‐bipyridine. Ultraviolet–visible (UV–vis) absorption spectra showed that the π‐conjugation system of the polymer expanded more effectively than that of a benzene analogue of poly(dithiafulvene) obtained from 1,4‐diethynylbenzene. Cyclic voltammetry measurements indicated that the dithiafulvene–bipyridyl polymer was a weaker electron‐donor polymer than the benzene analogue. These results supported the idea that the incorporation of the electron‐accepting bipyridyl moiety into conjugated poly(dithiafulvene) induced an intramolecular charge‐transfer (CT) effect between the units. Treatment of the dithiafulvene–bipyridyl polymer with bis(2,2′‐bipyridyl)dichlororuthenium (II) [Ru(bpy)₂Cl₂] afforded a ruthenium–polymer complex. A cyclic voltammogram of the complex showed broad redox peaks, which indicated electronic interaction between the dithiafulvene and tris(bipyridyl) ruthenium complex. The dithiafulvene–bipyridyl polymer formed CT complexes with 7,7,8,8‐tetracycanoquinodimethane (TCNQ) in dimethyl sulfoxide. The UV–vis absorption indicated that the resulting CT complex contained anion radical of TCNQ and partially charge‐transferred TCNQ. The polymer showed an unusually high electrical conductivity of 3.1 × 10^?4 S/cm in its nondoped state due to the effective donor–acceptor interaction between the bipyridine unit and the dithiafulvene unit. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4083–4090, 2001     

Ligand‐Tuning of the Excitation Wavelength of a Solid state E/Z Isomerization: [Zn(TA)2(2,2′‐Bipyridyl)] in a Supramolecular Framework

The single‐crystal‐to‐single‐crystal (SCSC) E?Z photoisomerization of TA in the supramolecular solid CECR‐[Zn(TA)₂(bpy)]·H₂O (CECR = C‐ethylcalixresorcinarene, HTA = tiglic acid, and bpy = 2,2′‐bipyridine, is induced by 458 nm light, indicating a red‐shift of the photo‐active wavelength on introduction of the aromatic bpy ligand compared with the previously studied reaction of CECR‐[Zn(TA)₂(H₂O)₂] 4H₂O. Theoretical calculations show that the initial excitation involves the bipyridyl ligand, which acts as an intramolecular photosensitizer for the isomerization process. The reaction is topotactic and illustrated by photodifference maps.     

Photoinduced Energy Transfer from Poly(N‐vinylcarbazole) to Tricarbonylchloro‐(2,2′‐bipyridyl)rhenium(I)

This work investigates the photoinduced energy transfer from poly(N‐vinylcarbazole) (PVK), as a donor material, to fac‐(2,2′‐bipyridyl)Re(CO)₃Cl, as a catalyst acceptor, for its potential application towards CO₂ reduction. Photoluminescence quenching experiments reveal dynamic quenching through resonance energy transfer in solid donor/acceptor mixtures and in solid/liquid systems. The bimolecular reaction rate constant at solution–film interfaces for the elementary reaction of the excited state with the quencher material could be determined as 8.8(±1.4)×10¹¹ L mol^?1 s^?1 by using Stern–Volmer analysis. This work shows that PVK is an effective and cheap absorber material that can act efficiently as a redox photosensitizer in combination with fac‐(2,2′‐bipyridyl)Re(CO)₃Cl as a catalyst acceptor, which might lead to possible applications in photocatalytic CO₂ reduction.     

A ruthenium complex with 1,5‐di­phenyl‐3‐thio­carbazone (dithizone) as monodentate ligands: bis(2,2′‐bipyridyl‐κ2N,N′)­bis­(dithizonato‐κS)ruthenium(II)

The title compound, [Ru(C₁₃H₁₁N₄S)₂(C₁₅H₈N₂)₂], has C₂ symmetry, with bidentate 2,2′‐bipyridyl ligands dictating a cis geometry around the Ru^II center. The monodentate S‐bonded dithizone ligands are almost planar, except for one of the phenyl rings, which is twisted by 34.2 (4)° from the N/N/C(S)/N/N plane. The Ru—S bond length is 2.4140 (13) Å, and the Ru—N bond lengths are 2.048 (4) and 2.074 (4) Å.     

A New Luminescent Ruthenium(II) Polypyridine‐derived Dipicolylamine Complex as a Sensor for Cu2+ Ions

A chemo‐sensor [Ru(bpy)₂(bpy‐DPF)](PF₆)₂ ( 1 ) (bpy=2,2′‐bipyridine, bpy‐DPF=2,2′‐bipyridyl‐4,4′‐bis(N,N‐di(2‐picolyl))formylamide) for Cu²⁺ using di(2‐picolyl)amine (DPA) as the recognition group and a ruthenium(II) complex as the reporting group was synthesized and characterized successfully. It demonstrates a high selectivity and efficient signaling behavior only for Cu²⁺ with obvious red‐shifted MLCT (metal‐to‐ligand charge transfer transitions) absorptions and dramatic fluorescence quenching compared with Zn²⁺ and other metal ions.     

Quality control of PET radiopharmaceuticals by high‐performance liquid chromatography with tris(2,2′‐bipyridyl)ruthenium(II) electrogenerated chemiluminescence detection

A highly sensitive reversed‐phase liquid chromatographic (HPLC) method was investigated to analyze a range of positron emission tomography (PET) radiopharmaceuticals using electrogenerated chemiluminescence (ECL) detection. ECL is based on the reaction of PET molecules with tris(2,2′‐bipyridyl)ruthenium(III) [Ru(bpy)₃³⁺], which is generated through the on‐line electro‐oxidation of Ru(bpy)₃²⁺. In 21 different radiopharmaceuticals studied, 18 compounds could be detected with detection limits (signal‐to‐noise ratio = 3) of 0.12–72 ng/mL per 20 μL injection. Sufficient reproducibility and linearity were obtained for the quantitative determination of PET molecules in pharmaceutical fluid. This method could be successfully applied to quality control tests of PET radiopharmaceuticals with ultra‐high specific radioactivity. Copyright © 2009 John Wiley & Sons, Ltd.     

DNA Interactions of the Functionalized (Mixed Polypyridine)ruthenium(II) Complex Bis(2,2′‐bipyridine‐κN1,κN1′)(methyl dipyrido[3,2‐a : 2′,3′‐c]phenazine‐11‐carboxylate‐κN4,κN5)ruthenium(2+) ([Ru(bpy)2(dppz‐11‐CO2Me)]2+)

A novel polypyridine ligand, dipyrido[3,2‐a:2′,3′‐c]phenazine‐11‐carboxylic acid methyl ester (=dppz‐11‐CO₂Me), and its ruthenium(II) complex, [Ru(bpy)₂(dppz‐11‐CO₂Me)]²⁺ ( 1 ), were synthesized and characterized. The binding properties of this complex to calf‐thymus DNA (CT‐DNA) were investigated by different spectrophotometric methods and viscosity measurements. The results suggest that the complex binds to DNA in an intercalative mode and serves as a molecular ‘light switch’ for DNA. When irradiated at 365 nm, the complex 1 promoted the photocleavage of plasmid pBR‐322 DNA.     

Crystallographic report: A synthetic precursor for hetero‐binuclear metal complexes, [Ru(bpy)(dppy)2(CO)2](PF6)2 (bpy = 2,2′‐bipyridine,dppy = 2‐(diphenylphosphino)pyridine)

In the title complex, [Ru(bpy)(dppy)₂(CO)₂](PF₆)₂ (bpy = 2,2′‐bipyridine, dppy = 2‐(diphenylphosphino)pyridine), the ruthenium atom exhibits a slightly distorted octahedral coordination with the carbonyl ligands in cis positions. In addition, two dppy ligands coordinate to the ruthenium center through the phosphorus atoms in mutually trans positions and two pyridyl nitrogen atoms of the dppy direct toward two carbonyl ligands. Copyright © 2004 John Wiley & Sons, Ltd.     

Two‐Photon Chemistry in Ruthenium 2,2′‐Bipyridyl‐Functionalized Single‐Wall Carbon Nanotubes

Ruthenium polypyridyl complexes are widely used as light harvesters in dye‐sensitized solar cells. Since one of the potential applications of single‐wall carbon nanotubes (SWCNTs) and their derived materials is their use as active components in organic and hybrid solar cells, the study of the photochemistry of SWCNTs with tethered ruthenium polypyridyl complexes is important. A water‐soluble ruthenium tris(bipyridyl) complex linked through peptidic bonds to SWCNTs (Ru‐SWCNTs) was prepared by radical addition of thiol‐terminated SWCNT to a terminal C?C double bond of a bipyridyl ligand of the ruthenium tris(bipyridyl) complex. The resulting macromolecular Ru‐SWCNT (≈500 nm, 15.6 % ruthenium complex content) was water‐soluble and was characterized by using TEM, thermogravimetric analysis, chemical analysis, and optical spectroscopy. The emission of Ru‐SWCNT is 1.6 times weaker than that of a mixture of [Ru(bpy)₃]²⁺ and SWCNT of similar concentration. Time‐resolved absorption optical spectroscopy allows the detection of the [Ru(bpy)₃]²⁺‐excited triplet and [Ru(bpy)₃]⁺. The laser flash studies reveal that Ru‐SWCNT exhibits an unprecedented two‐photon process that is enabled by the semiconducting properties of the SWCNT. Thus, the effect of the excitation wavelength and laser power on the transient spectra indicate that upon excitation of two [Ru(bpy)₃]²⁺ complexes of Ru‐SWCNT, a disproportionation process occurs leading to delayed formation of [Ru(bpy)₃]⁺ and the performance of the SWCNT as a semiconductor. This two‐photon delayed [Ru(bpy)₃]⁺ generation is not observed in the photolysis of [Ru(bpy)₃]³⁺; SWCNT acts as an electron wire or electron relay in the disproportionation of two [Ru(bpy)₃]²⁺ triplets in a process that illustrates that the SWCNT plays a key role in the process. We propose a mechanism for this two‐photon disproportionation compatible with i) the need for high laser flux, ii) the long lifetime of the [Ru(bpy)₃]²⁺ triplets, iii) the semiconducting properties of the SWNT, and iv) the energy of the HOMO/LUMO levels involved.     

Electrogenerated Chemiluminescence Sensor Based on Tris(2,2′‐bipyridine)ruthenium(II)‐Immobilized Natural Clay and Ionic Liquid

A novel electrogenerated chemiluminescence (ECL) sensor based on natural clay and ionic liquid was fabricated. Tris(2,2′‐bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) was immobilized on natural clay surface through simple adsorption. An ECL sensor was prepared by mixing Ru(bpy)₃²⁺‐incorporated clay, graphite powder and an ionic liquid (1‐butyl‐3‐methylimidazolium hexafluorophosphate) as the binder. The electrochemical behavior and ECL of the immobilized Ru(bpy)₃²⁺ was investigated. It was observed that the ECL of immobilized Ru(bpy)₃²⁺ was activated by the ionic liquid. The proposed ECL sensor showed high sensitivity to tri‐n‐propylamine (TPrA) and the detection limit was found to be 20 pM. In addition, the ECL sensor displayed good stability for TPrA detection and long‐term storage stability.     

Synthesis of N,N,N-4,4＂-Di-（4-methylphenyl）-2,2＇：6＇,2＂- terpyridine-N,N,N-tris（isothiocyanato） Ruthenium（Ⅱ） and Application to Colorimetric Hg^2＋ Sensor

A terpyridine derivative DPTP [di-（4-methylphenyl）-2,2＇：6＇,2＂-terpyridine] was conveniently synthesized from 2-bromopyridine via halogen-dance reaction, Kharash coupling and Stille coupling reaction. Then its corresponding ruthenium complex Ru-DPTP [N,N,N-4,4＇＇-di-（4-methy,phenyl）-2,2＇：6＇,2＂-terpyridine-N,N,N-tris（is,-thi,cyanat,）- ruthenium（H） ammonium] was obtained and fully characterized by IR, UV-Vis, ESI MS and elemental analysis. The MLCT absorption band of Ru-DPTP was blue-shifted from 570 to 500 nm upon addition of Hg^2＋. Among a series of surveyed metal ions, the complex showed a unique recognition to Hg^2＋, indicating that it can be used as a selective colorimetric sensor for Hg^2＋.     

Synthesis and Characterization of Dinuclear Ruthenium(II) Complexes Based on 4,4′‐Bipyridyl Type Bridging Ligands

The synthesis, spectroscopic, electrochemical and photophysical characterization of a series of dinuclear ruthenium(II) complexes of the type [(bpy)₂Ru(NnN)₂RuCl(bpy)₂](PF₆)₃, where NnN = 4,4′‐bipyridyl (N0N), 1,2‐bis(4‐pyridyl)ethylene (NEN), 1,2‐bis(4‐pyridyl)ethane (N2N), and 4,4′‐trimethylenedipyridine (N3N) are reported. The photophysical and electrochemical properties are discussed with particular emphasis on the ability of the bridging ligands to support intercomponent interaction.     

Synthesis,Characterization, and DNA‐Binding Properties of the Chiral Ruthenium(II) Complexes Δ‐ and Λ‐[Ru(bpy)2(dmppd)]2+ (dmppd = 10,12‐Dimethylpteridino[6,7‐f] [1,10]phenanthroline‐11,13(10H,12H)‐dione; bpy = 2,2′‐Bipyridine)

Two novel chiral ruthenium(II) complexes, Δ‐[Ru(bpy)₂(dmppd)]²⁺ and Λ‐[Ru(bpy)₂(dmppd)]²⁺ (dmppd = 10,12‐dimethylpteridino[6,7‐f] [1,10]phenanthroline‐11,13(10H,12H)‐dione, bpy = 2,2′‐bipyridine), were synthesized and characterized by elemental analysis, ¹H‐NMR and ES‐MS. The DNA‐binding behaviors of both complexes were studied by UV/VIS absorption titration, competitive binding experiments, viscosity measurements, thermal DNA denaturation, and circular‐dichroism spectra. The results indicate that both chiral complexes bind to calf‐thymus DNA in an intercalative mode, and the Δ enantiomer shows larger DNA affinity than the Λ enantiomer does. Theoretical‐calculation studies for the DNA‐binding behaviors of these complexes were carried out by the density‐functional‐theory method. The mechanism involved in the regulating and controlling of the DNA‐binding abilities of the complexes was further explored by the comparative studies of [Ru(bpy)₂(dmppd)]²⁺ and of its parent complex [Ru(bpy)₂(ppd)]²⁺ (ppd = pteridino[6,7‐f] [1,10]phenanthroline‐11,13 (10H,12H)‐dione).     

Synthesis,Characterization, and DNA Interaction Studies of the Ruthenium(II) Complexes [Ru(bpy)2(ipbp)]2+ and [Ru(ipbp)(phen)2]2+ (ipbp=3‐(1H‐Imidazo[4,5‐f][1,10]phenanthrolin‐2‐yl)‐4H‐1‐benzopyran‐2‐one; bpy=2,2′‐Bipyridine; phen=1,10‐Phenanthroline)

A novel ligand 3‐(1H‐imidazo[4,5‐f][1,10]phenanthrolin‐2‐yl)‐4H‐1‐benzopyran‐4‐one (ipbp) and its ruthenium(II) complexes [Ru(bpy)₂(ipbp)]²⁺ ( 1 ) and [Ru(ipbp)(phen)₂]²⁺ ( 2 ) (bpy=2,2′‐bipyridine, phen=1,10‐phenanthroline) were synthesized and characterized by elemental analysis and mass, ¹H‐NMR, and electronic‐absorption spectroscopy. The electrochemical behavior of the complexes was studied by cyclic voltammetry. The DNA‐binding behavior of the complexes was investigated by spectroscopic methods and viscosity measurements. The results indicate that complexes 1 and 2 bind with calf‐thymus DNA in an intercalative mode. In addition, 1 and 2 promote cleavage of plasmid pBR 322 DNA from the supercoil form I to the open circular form II upon irradiation.     

Synthesis and Characterization of Heteroleptic Ru(II) Complexes Based on 4,4′‐Bis((E)‐styryl)‐2,2′‐bipyridine as Ancillary Ligand and Application for Dye‐Sensitized Solar Cells

Heteroleptic Ru(II) complexes were designed based on 4,4′‐bis((E)‐styryl)‐2,2′‐bipyridine (bsbpy) as an ancillary ligand for dye‐sensitized solar cells (DSSCs), and those Ru(II) sensitizers, [Ru(L)(bsbpy)(NCS)₂][TBA] (TBA; tetrabutylammonium), were synthesized according to a typical one‐pot reaction of [RuCl₂(p‐cymene)]₂ with the corresponding anchoring ligands (where L = 4,4′‐dicarboxy‐2,2′‐bipyridine (dcbpy), 4,4′‐bis((E)‐carboxyvinyl)‐2,2′‐bipyridine (dcvbpy), 4,7‐dicarboxy‐1,10‐phenanthroline (dcphen), or 4,7‐bis((E)‐carboxyvinyl)‐1,10‐phenanthroline (dcvphen)). The new Ru(II) dyes, [Ru(L)(bsbpy)(NCS)₂][TBA] that incorporated vinyl spacer(s) into ancillary and/or anchoring ligand displayed red‐shifted bands over the overall UV/VIS region relative to the absorption spectra of N719 . A combination of bsbpy ancillary and dcphen anchoring ligand showed the best result for the overall power conversion efficiency (η); i.e., a DSSC fabricated with [Ru(dcphen)(bsbpy)(NCS)₂][TBA] exhibited a power conversion efficiency (η) of 2.98% (compare to N719 , 4.82%).     

Electrogenerated Chemiluminescence of Tris(2,2′‐bipyridyl)ruthenium(II) Immobilized in Humic Acid‐Silica‐Poly(vinyl alcohol) Composite Films

In this paper, we report the first attempt to use humic acid (HA) as modifiers to prepare the organic‐inorganic hybrid modified glassy carbon electrodes based on HA‐silica‐PVA (poly(vinyl alcohol)) sol‐gel composite. Electroactive species of tris(2,2′‐bipyridyl)ruthenium(II) (Ru(bpy) ) can easily incorporate into the HA‐silica‐PVA films to form Ru(bpy) modified electrodes. The amount of Ru(bpy) incorporated in the composite films strongly depends on the amount of HA in the hybrid sol. Electrochemical and electrogenerated chemiluminescence (ECL) of Ru(bpy) immobilized in HA‐silica composite films coated on a glassy carbon electrode have been studied with tripropylamine (TPA) as the coreactant. The analytical performance of this modified electrode was evaluated in a flow injection analysis (FIA) system with a homemade flow cell. The as‐prepared electrode showed good stability and high sensitivity. The detection limits (S/N=3) were 0.050 μmol L^?1 for TPA and 0.20 μmol L^?1 for oxalate, and the linear ranges were from 0.10 μmol L^?1 to 1.0 mmol L^?1 for TPA and from 1.0 μmol L^?1 to 1.0 mmol L^?1 for oxalate, respectively. The resulting electrodes were stable over two months.     

Synthesis,characterization, and metal complexes of polyacetylenes with pendant 2,2′‐bipyridyl groups

5‐Ethynyl‐2,2′‐bipyridine ( 1 ; bpyC≡CH) polymerized in the presence of catalytic amounts of [RhF(COD)(PPh₃)] or [Rh(μ‐OH)(COD)]₂ (COD = 1,5‐cyclooctadiene) in 74–91% yields. In contrast, [Rh(μ‐X)(NBD)]₂ (X = Cl or OMe; NBD = norbornadiene) did not catalyze the polymerization of 1 or gave low yields of the polymer. The obtained polymer, poly(5‐ethynyl‐2,2′‐bipyridine) [ 2 ; (bpyC?CH)_n], was highly stereoregular with a predominant cis–transoidal geometry. Random copolyacetylenes containing the 2,2′‐bipyridyl group with improved solubility in organic solvents were obtained by the treatment of a mixture of 1 and phenylacetylene ( 3 ) or 1‐ethynyl‐4‐n‐pentyl‐benzene with catalytic amounts of [RhF(COD)(PPh₃)]. A block copolymer of 1 and 3 was prepared by the addition of 1 to a poly(phenylacetylene) containing a living end. The reaction of 2 with [Mo(CO)₆] produced an insoluble polymer containing [Mo(CO)₄(bpy)] groups, whereas with [RuCl₂(bpy)₂] or [Ru(bpy)₂(CH₃COCH₃)₂](CF₃SO₃)₂, it gave soluble metal–polymer complexes containing [Ru(bpy)₃]²⁺ groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43:3167–3177, 2005     

Synthesis and photophysical properties of novel amphiphilic ruthenium (II) complexes containing 4,4′‐dialkylaminomethyl‐2,2′‐bipyridyl ligands

The synthesis of a number of new 2,2′‐bipyridine ligands functionalized with bulky amino side groups is reported. Three homoleptic polypyridyl ruthenium (II) complexes, [Ru(L)₃]²⁺ 2(PF₆^?), where L is 4,4′‐dioctylaminomethyl‐2,2′‐bipyridine (Ru4a), 4,4′‐didodecylaminomethyl‐2,2′‐bipyridine (Ru4b) and 4,4′‐dioctadodecylaminomethyl‐2,2′‐bipyridine (Ru4c), have been synthesized. These compounds were characterized and their photophysical properties examined. The electronic spectra of three complexes show pyridyl π → π* transitions in the UV region and metal‐to‐ligand charge transfer bands in the visible region. Copyright © 2005 John Wiley & Sons, Ltd.