A New Luminescent Ruthenium(II) Polypyridine‐derived Dipicolylamine Complex as a Sensor for Cu2+ Ions

A chemo‐sensor [Ru(bpy)₂(bpy‐DPF)](PF₆)₂ ( 1 ) (bpy=2,2′‐bipyridine, bpy‐DPF=2,2′‐bipyridyl‐4,4′‐bis(N,N‐di(2‐picolyl))formylamide) for Cu²⁺ using di(2‐picolyl)amine (DPA) as the recognition group and a ruthenium(II) complex as the reporting group was synthesized and characterized successfully. It demonstrates a high selectivity and efficient signaling behavior only for Cu²⁺ with obvious red‐shifted MLCT (metal‐to‐ligand charge transfer transitions) absorptions and dramatic fluorescence quenching compared with Zn²⁺ and other metal ions.     

trans‐(Cl)‐[Ru(5,5′‐diamide‐2,2′‐bipyridine)(CO)2Cl2]: Synthesis,Structure, and Photocatalytic CO2 Reduction Activity

A series of trans‐(Cl)‐[Ru(L)(CO)₂Cl₂]‐type complexes, in which the ligands L are 2,2′‐bipyridyl derivatives with amide groups at the 5,5′‐positions, are synthesized. The C‐connected amide group bound to the bipyridyl ligand through the carbonyl carbon atom is twisted with respect to the bipyridyl plane, whereas the N‐connected amide group is in the plane. DFT calculations reveal that the twisted structure of the C‐connected amide group raises the level of the LUMO, which results in a negative shift of the first reduction potential (E_p) of the ruthenium complex. The catalytic abilities for CO₂ reduction are evaluated in photoreactions (λ>400 nm) with the ruthenium complexes (the catalyst), [Ru(bpy)₃]²⁺ (bpy=2,2′‐bipyridine; the photosensitizer), and 1‐benzyl‐1,4‐dihydronicotinamide (the electron donor) in CO₂‐saturated N,N‐dimethylacetamide/water. The logarithm of the turnover frequency increases by shifting E_p a negative value until it reaches the reduction potential of the photosensitizer.     

TEMPO‐Mediated Oxidation of Primary Alcohols to Aldehydes under Visible Light and Air

A homogeneous visible light photoredox TEMPO‐mediated selective oxidation of primary alcohols to the corresponding carbonyl compounds was developed using molecular oxygen from air as the terminal oxidant. Ru(bpy)₃(PF₆)₂ (bpy: bipyridyl) and Ir(dtb‐bpy)(ppy)₂(PF₆) (dtb‐bpy: 4,4′‐di‐tert‐butyl‐2,2′‐bipyridyl; ppy: 2‐phenylpyridine) were used as the sensitizers.     

Photochemistry of RuII 4,4′‐Bi‐1,2,3‐triazolyl (btz) Complexes: Crystallographic Characterization of the Photoreactive Ligand‐Loss Intermediate trans‐[Ru(bpy)(κ2‐btz)(κ1‐btz)(NCMe)]2+

We report the unprecedented observation and unequivocal crystallographic characterization of the meta‐stable ligand loss intermediate solvento complex trans‐[Ru(bpy)(κ²‐btz)(κ¹‐btz)(NCMe)]²⁺ ( 1 a ) that contains a monodentate chelate ligand. This and analogous complexes can be observed during the photolysis reactions of a family of complexes of the form [Ru($\widehat{NN}$ )(btz)₂]²⁺ ( 1 a – d : btz=1,1′‐dibenzyl‐4,4′‐bi‐1,2,3‐triazolyl; $\widehat{NN}$ =a) 2,2′‐bipyridyl (bpy), b) 4,4′‐dimethyl‐2,2′‐bipyridyl (dmbpy), c) 4,4′‐dimethoxy‐2,2′‐bipyridyl (dmeobpy), d) 1,10‐phenanthroline (phen)). In acetonitrile solutions, 1 a – d eventually convert to the bis‐solvento complexes trans‐[Ru($\widehat{NN}$ )(btz)(NCMe)₂]²⁺ ( 3 a – d ) along with one equivalent of free btz, in a process in which the remaining coordinated bidentate ligands undergo a new rearrangement such that they become coplanar. X‐ray crystal structure of 3 a and 3 d confirmed the co‐planar arrangement of the $\widehat{NN}$ and btz ligands and the trans coordination of two solvent molecules. These conversions proceed via the observed intermediate complexes 2 a – d , which are formed quantitatively from 1 a – d in a matter of minutes and to which they slowly revert back on being left to stand in the dark over several days. The remarkably long lifetime of the intermediate complexes (>12 h at 40 °C) allowed the isolation of 2 a in the solid state, and the complex to be crystallographically characterized. Similarly to the structures adopted by complexes 3 a and d , the bpy and κ²‐btz ligands in 2 a coordinate in a square‐planar fashion with the second monodentate btz ligand coordinated trans to an acetonitrile ligand.     

Dinuclear Complexes of Copper(I) with Crown Ether‐containing N‐Thiophosphorylated Bis‐thioureas and 2,2′‐Bipyridine or 1,10‐Phenanthroline: Synthesis,Characterization, and Picrate Extraction Properties

Reaction of O,O′‐diisopropylthiophosphoric acid isothiocyanate (iPrO)₂P(S)NCS with 1,10‐diaza‐18‐crown‐6, 1,7‐diaza‐18‐crown‐6, or 1,7‐diaza‐15‐crown‐5 leads to the N‐thiophosphorylated bis‐thioureas N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6 ( H₂L^I ), N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,7‐diaza‐18‐crown‐6 ( H₂L^II ) and N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,7‐diaza‐15‐crown‐5 ( H₂L^III ). Reaction of the potassium salts of H₂L^I–III with a mixture of CuI and 2,2′‐bipyridine ( bpy ) or 1,10‐phenanthroline ( phen ) in aqueous EtOH/CH₂Cl₂ leads to the dinuclear complexes [Cu₂(bpy)₂L^I–III] and [Cu₂(phen)₂L^I–III] . The structures of these compounds were investigated by ¹H, ³¹P{¹H} NMR spectroscopy, and elemental analysis. The crystal structures of H₂L^I and [Cu₂(phen)₂L^I] were determined by single‐crystal X‐ray diffraction. Extraction capacities of the obtained compounds in comparison to the related compounds 1,10‐diaza‐18‐crown‐6, N,N′‐bis[C(=CMe₂)CH₂P(O)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6, N,N′‐bis[C(S)NHP(O)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6 towards the picrate salts LiPic, NaPic, KPic. and NH₄Pic were also studied.     

Synthesis and photophysical properties of novel amphiphilic ruthenium (II) complexes containing 4,4′‐dialkylaminomethyl‐2,2′‐bipyridyl ligands

The synthesis of a number of new 2,2′‐bipyridine ligands functionalized with bulky amino side groups is reported. Three homoleptic polypyridyl ruthenium (II) complexes, [Ru(L)₃]²⁺ 2(PF₆^?), where L is 4,4′‐dioctylaminomethyl‐2,2′‐bipyridine (Ru4a), 4,4′‐didodecylaminomethyl‐2,2′‐bipyridine (Ru4b) and 4,4′‐dioctadodecylaminomethyl‐2,2′‐bipyridine (Ru4c), have been synthesized. These compounds were characterized and their photophysical properties examined. The electronic spectra of three complexes show pyridyl π → π* transitions in the UV region and metal‐to‐ligand charge transfer bands in the visible region. Copyright © 2005 John Wiley & Sons, Ltd.     

Metallomacrocycles with a Difference: Macrocyclic Complexes with Exocyclic Ruthenium(II)‐Containing Domains

The templated synthesis of organic macrocycles containing rings of up to 96 atoms and three 2,2′‐bipyridine (bpy) units is described. Starting with the bpy‐centred ligands 5,5′‐bis[3‐(1,4‐dioxahept‐6‐enylphenyl)]‐2,2′‐bipyridine and 5,5′‐bis[3‐(1,4,7‐trioxadec‐9‐enylphenyl)]‐2,2′‐bipyridine, we have applied Grubbs’ methodology to couple the terminal alkene units of the coordinated ligands in [FeL₃]²⁺ complexes. Hydrogenation and demetallation of the iron(II)‐containing macrocyclic complexes results in the isolation of large organic macrocycles. The latter bind {Ru(bpy)₂} units to give macrocyclic complexes with exocyclic ruthenium(II)‐containing domains. The complex [Ru(bpy)₂(L)]²⁺ (isolated as the hexafluorophosphate salt), in which L=5,5′‐bis[3‐(1,4,7,10‐tetraoxatridec‐12‐enylphenyl)]‐2,2′‐bipyridine, undergoes intramolecular ring‐closing metathesis to yield a macrocycle which retains the exocyclic {Ru(bpy)₂} unit. The poly(ethyleneoxy) domains in the latter macrocycle readily scavenge sodium ions, as proven by single‐crystal X‐ray diffraction and atomic absorption spectroscopy data for the bulk sample. In addition to the new compounds, a series of model complexes have been fully characterized, and representative single‐crystal X‐ray structural data are presented for iron(II) and ruthenium(II) acyclic and macrocyclic species.     

Tris(2,2′‐bipyridine)ruthenium Derivatives with Multiple Viologen Acceptors: Quadratic Dependence of Photocatalytic H2 Evolution Rate on the Local Concentration of the Acceptor Site

Three Ru(bpy)₃²⁺ derivatives tethered to multiple viologen acceptors, [Ru(bpy)₂(4,4′‐MV2)]⁶⁺, [Ru(bpy)₂(4,4′‐MV4)]¹⁰⁺, and [Ru(bpy)(4,4′‐MV4)₂]¹⁸⁺ [bpy=2,2′‐bipyridine, 4,4′‐MV2=4‐ethoxycarbonyl‐4′‐(N‐G₁‐carbamoyl)‐2,2′‐bipyridine, and 4,4′‐MV4=4,4′‐bis(N‐G₁‐carbamoyl)‐2,2′‐bipyridine, where G₁=Asp(NHG₂)‐NHG₂ and G₂=‐(CH₂)₂‐N⁺C₅H₄‐C₅H₄N⁺‐CH₃] were prepared as “photo‐charge separators (PCSs)”. Photoirradiation of these complexes in the presence of a sacrificial electron donor (EDTA) results in storage of electrons per PCS values of 1.3, 2.7, and 4.6, respectively. Their applications in the photochemical H₂ evolution from water in the presence of a colloidal Pt H₂‐evolving catalyst were investigated, and are discussed along with those reported for [Ru(bpy)₂(5,5′‐MV4)]¹⁰⁺, [Ru(4,4′‐MV4)₃]²⁶⁺, and [Ru(5,5′‐MV4)₃]²⁶⁺ (Inorg. Chem. Front. 2016 , 3, 671–680). The PCSs with high dimerization constants (K_d=10⁵–10⁶ m ^?1) are superior in driving H₂ evolution at pH 5.0, whereas those with lower K_d values (10³–10⁴ m ^?1) are superior at pH 7.0, where K_d=[(MV⁺)₂]/[MV^{+ .} ]². The (MV⁺)₂ site can drive H₂ evolution only at pH 5.0 as a result of its 0.15 eV lower driving force for H₂ evolution relative to MV^{+ .} , whereas the PCSs with lower K_d values exhibit higher performance at pH 7.0 owing to the higher population of free MV^{+ .} . Importantly, the rate of electron charging over the PCSs is linear to the apparent H₂ evolution rate, and shows an intriguing quadratic dependence on the number of MV²⁺ units per PCS.     

Synthesis,Characterization, and DNA‐Binding Properties of the Chiral Ruthenium(II) Complexes Δ‐ and Λ‐[Ru(bpy)2(dmppd)]2+ (dmppd = 10,12‐Dimethylpteridino[6,7‐f] [1,10]phenanthroline‐11,13(10H,12H)‐dione; bpy = 2,2′‐Bipyridine)

Two novel chiral ruthenium(II) complexes, Δ‐[Ru(bpy)₂(dmppd)]²⁺ and Λ‐[Ru(bpy)₂(dmppd)]²⁺ (dmppd = 10,12‐dimethylpteridino[6,7‐f] [1,10]phenanthroline‐11,13(10H,12H)‐dione, bpy = 2,2′‐bipyridine), were synthesized and characterized by elemental analysis, ¹H‐NMR and ES‐MS. The DNA‐binding behaviors of both complexes were studied by UV/VIS absorption titration, competitive binding experiments, viscosity measurements, thermal DNA denaturation, and circular‐dichroism spectra. The results indicate that both chiral complexes bind to calf‐thymus DNA in an intercalative mode, and the Δ enantiomer shows larger DNA affinity than the Λ enantiomer does. Theoretical‐calculation studies for the DNA‐binding behaviors of these complexes were carried out by the density‐functional‐theory method. The mechanism involved in the regulating and controlling of the DNA‐binding abilities of the complexes was further explored by the comparative studies of [Ru(bpy)₂(dmppd)]²⁺ and of its parent complex [Ru(bpy)₂(ppd)]²⁺ (ppd = pteridino[6,7‐f] [1,10]phenanthroline‐11,13 (10H,12H)‐dione).     

Alternating π‐conjugated copolymer of dithiafulvene with 2,2′‐bipyridyl units

A π‐conjugated polymer containing a dithiafulvene unit and a bipyridyl unit was prepared by cycloaddition polymerization of aldothioketene derived from 5,5′‐diethynyl‐2,2′‐bipyridine. Ultraviolet–visible (UV–vis) absorption spectra showed that the π‐conjugation system of the polymer expanded more effectively than that of a benzene analogue of poly(dithiafulvene) obtained from 1,4‐diethynylbenzene. Cyclic voltammetry measurements indicated that the dithiafulvene–bipyridyl polymer was a weaker electron‐donor polymer than the benzene analogue. These results supported the idea that the incorporation of the electron‐accepting bipyridyl moiety into conjugated poly(dithiafulvene) induced an intramolecular charge‐transfer (CT) effect between the units. Treatment of the dithiafulvene–bipyridyl polymer with bis(2,2′‐bipyridyl)dichlororuthenium (II) [Ru(bpy)₂Cl₂] afforded a ruthenium–polymer complex. A cyclic voltammogram of the complex showed broad redox peaks, which indicated electronic interaction between the dithiafulvene and tris(bipyridyl) ruthenium complex. The dithiafulvene–bipyridyl polymer formed CT complexes with 7,7,8,8‐tetracycanoquinodimethane (TCNQ) in dimethyl sulfoxide. The UV–vis absorption indicated that the resulting CT complex contained anion radical of TCNQ and partially charge‐transferred TCNQ. The polymer showed an unusually high electrical conductivity of 3.1 × 10^?4 S/cm in its nondoped state due to the effective donor–acceptor interaction between the bipyridine unit and the dithiafulvene unit. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4083–4090, 2001     

Quality control of PET radiopharmaceuticals by high‐performance liquid chromatography with tris(2,2′‐bipyridyl)ruthenium(II) electrogenerated chemiluminescence detection

A highly sensitive reversed‐phase liquid chromatographic (HPLC) method was investigated to analyze a range of positron emission tomography (PET) radiopharmaceuticals using electrogenerated chemiluminescence (ECL) detection. ECL is based on the reaction of PET molecules with tris(2,2′‐bipyridyl)ruthenium(III) [Ru(bpy)₃³⁺], which is generated through the on‐line electro‐oxidation of Ru(bpy)₃²⁺. In 21 different radiopharmaceuticals studied, 18 compounds could be detected with detection limits (signal‐to‐noise ratio = 3) of 0.12–72 ng/mL per 20 μL injection. Sufficient reproducibility and linearity were obtained for the quantitative determination of PET molecules in pharmaceutical fluid. This method could be successfully applied to quality control tests of PET radiopharmaceuticals with ultra‐high specific radioactivity. Copyright © 2009 John Wiley & Sons, Ltd.     

Solid‐State Electrochemistry and Electrochemiluminescence of Porous Thin Film of [(2,2′‐Bipyridyl)(4‐(2‐pyrrol‐1‐ylethyl)‐4′‐methyl‐2,2′‐bipyridyl)2]ruthenium(II) Monomer Precipitation

A novel fluorescent porous thin film based on the precipitation of the [(2,2′‐bipyridyl)(4‐(2‐pyrrol‐1‐ylethyl)‐4′‐methyl‐2,2′‐bipyridyl)₂]ruthenium(II) (BF₄)₂ complex (pyr‐Ru) was fabricated by easily spreading 2 µL of pyr‐Ru (1 mM in acetonitrile solution) onto the surface of a platinum electrode and drying it in ambient conditions. The morphology of the resulting pyr‐Ru thin film was characterized by scanning electron microscopy (SEM) and fluorescence microscopy. The coating exhibits fluorescent properties of the ruthenium complex and a porous structure with pore diameters of micrometers. The solid‐state electrochemistry and electrochemiluminescence behaviors of the porous pyr‐Ru thin film were investigated in aqueous solution by cyclic voltammetry and step potential.     

Optically Active Helical Poly[(S)‐3‐vinyl‐2,2′‐dihydroxy‐1,1′‐binaphthyl]: New Ligand for Asymmetric Addition of Diethylzinc to Aryl Aldehyde

Poly[(S)‐3‐vinyl‐2,2′‐dihydroxy‐1,1′‐binaphthyl] (L*) was obtained by taking off the protecting groups of poly[(S)‐3‐vinyl‐2,2′‐bis(methoxymethoxy)‐1,1′‐binaphthyl] (poly‐ 1 ). L* was proved to keep a stable helical conformation in solution. The application of helical L* in the asymmetric addition of diethylzinc to aldehydes has been studied. The catalytic system employing 10 mol% of L* and 150 mol% of Ti(OⁱPr)₄ was found to promote the addition of diethylzinc to a wide range of aromatic aldehydes, giving up to 99% enantiomeric excess (ee) and up to 93% yield of the corresponding secondary alcohol at 0°C. The chiral polymer can be easily recovered and reused without loss of catalytic activity as well as enantioselectivity.     

Synthesis and Characterization of Heteroleptic Ru(II) Complexes Based on 4,4′‐Bis((E)‐styryl)‐2,2′‐bipyridine as Ancillary Ligand and Application for Dye‐Sensitized Solar Cells

Heteroleptic Ru(II) complexes were designed based on 4,4′‐bis((E)‐styryl)‐2,2′‐bipyridine (bsbpy) as an ancillary ligand for dye‐sensitized solar cells (DSSCs), and those Ru(II) sensitizers, [Ru(L)(bsbpy)(NCS)₂][TBA] (TBA; tetrabutylammonium), were synthesized according to a typical one‐pot reaction of [RuCl₂(p‐cymene)]₂ with the corresponding anchoring ligands (where L = 4,4′‐dicarboxy‐2,2′‐bipyridine (dcbpy), 4,4′‐bis((E)‐carboxyvinyl)‐2,2′‐bipyridine (dcvbpy), 4,7‐dicarboxy‐1,10‐phenanthroline (dcphen), or 4,7‐bis((E)‐carboxyvinyl)‐1,10‐phenanthroline (dcvphen)). The new Ru(II) dyes, [Ru(L)(bsbpy)(NCS)₂][TBA] that incorporated vinyl spacer(s) into ancillary and/or anchoring ligand displayed red‐shifted bands over the overall UV/VIS region relative to the absorption spectra of N719 . A combination of bsbpy ancillary and dcphen anchoring ligand showed the best result for the overall power conversion efficiency (η); i.e., a DSSC fabricated with [Ru(dcphen)(bsbpy)(NCS)₂][TBA] exhibited a power conversion efficiency (η) of 2.98% (compare to N719 , 4.82%).     

基于2,4′-二羧基二苯甲酮构筑的具有一维梯状链和一维隧道的三维超分子体系

采用水热法设计合成了两个新型三维超分子化合物H₂L·H₂O (1)和[Ag(bpy)₂]·HL·H₂O (2) (其中bpy=2,2'-联吡啶, H₂L=2,4′-二羧基二苯甲酮),晶体结构分析表明,它们均是通过氢键采用不同的连接方式拓展而成。其中,化合物1 是2,4′-二羧基二苯甲酮和水分子通过O–H···O氢键形成的一维梯状链扩展构筑的三维超分子体系;化合物2 则是2,4′-二羧基二苯甲酮和水分子通过两种氢键形成含有一维隧道的三维超分子体系。有趣的是,[Ag(bpy)₂]⁺ 阳离子通过π–π 堆积和弱的Ag···Ag相互作用连在一起,进而以客体形式填充其中。荧光性质研究表明,由于存在bpy的螯合与堆积效应,化合物2相比配体和化合物1,其荧光发射峰发生红移。     

Heteroleptic ruthenium sensitizers that contain an ancillary bipyridine ligand tethered with hydrocarbon chains for efficient dye-sensitized solar cells

New heteroleptic ruthenium complexes have been synthesized and used as the sensitizers for dye‐sensitized solar cells (DSSCs). The ancillary bipyridine ligand contains rigid aromatic segments (fluorene‐, carbazole‐, or dithieno[3,2‐b:2′,3′‐d]pyrrole‐substituted bipyridine) tethered with a hydrophobic hexyl substituent. The conjugated aromatic segment results in significant bathochromic shift and hyperchromic effects in these complexes compared with Z907 (cis‐[Ru LL′ (NCS)₂]; L =4,4′‐dicarboxylic acid‐2,2′‐bipyridine, L′ =4,4′‐dinonyl‐2,2′‐ bipyridine). The long hydrocarbon chains help to suppress the dark current if appropriately disposed. DSSCs that use these complexes exhibit very impressive conversion efficiencies (5.94 to 6.91 %) that surpass that of Z907 ‐based (6.36 %) DSSCs and are comparable with that of N719 ‐based standard cells (7.13 %; N719 =cis‐di(thiocyanato)bis(2,2′‐bipyridyl‐4,4′‐dicarboxylato)ruthenium(II) bis(tetrabutylammonium)) fabricated and measured under similar conditions (active area: 0.5×0.5 cm²; AM 1.5 sunlight).     

Modified polyoxometalate: a novel monocapped bi‐supporting and reduced α‐Keggin structure {PMo12O40[Cu(2,2′‐bpy)]}[Cu(2,2′‐bpy)(en)(H2O)]2

A novel modified polyoxometalate, {PMo₁₂O₄₀[Cu(2,2′‐bpy)]}[Cu(2,2′‐bpy)(en)(H₂O)]₂ [2,2′‐bpy is 2,2′‐bipyridyl (C₁₀H₈N₂) and en is ethylenediamine (C₂H₈N₂)], has been synthesized hydrothermally and structurally characterized by elemental analysis, TG, IR, XPS and single‐crystal X‐ray diffraction. The structural analysis reveals that the compound contains the reduced Keggin polyanion [PMo₁₂O₄₀]^6? as the parent unit, which is monocapped by [Cu(2,2′‐bpy)]²⁺ fragments via four bridging O atoms on an {Mo₄O₄} pit and bi‐supported by two [Cu(2,2′‐bpy)(en)(H₂O)]²⁺ coordination cations simultaneously. There exist strong intramolecular π–π stacking between the capping and supporting units, which play a stabilizing role during the crystallization of the compound. Adjacent POM clusters are further aggregated to form a three‐dimensional supramolecular network through noncovalent forces, hydrogen bonding and π–π stacking interactions. In addition, the photocatalytic properties were investigated in detail, and the results indicated that the compound can be used as a photocatalyst towards the decomposition of the organic pollutant methylene blue (MB).     

Synthesis and Characterization of Dinuclear Ruthenium(II) Complexes Based on 4,4′‐Bipyridyl Type Bridging Ligands

The synthesis, spectroscopic, electrochemical and photophysical characterization of a series of dinuclear ruthenium(II) complexes of the type [(bpy)₂Ru(NnN)₂RuCl(bpy)₂](PF₆)₃, where NnN = 4,4′‐bipyridyl (N0N), 1,2‐bis(4‐pyridyl)ethylene (NEN), 1,2‐bis(4‐pyridyl)ethane (N2N), and 4,4′‐trimethylenedipyridine (N3N) are reported. The photophysical and electrochemical properties are discussed with particular emphasis on the ability of the bridging ligands to support intercomponent interaction.     

Tetrakis(μ‐2,3‐dimethoxybenzoato)bis[(2,2′‐bipyridine)(2,3‐dimethoxybenzoato)lanthanum(III)]

The title compound, tetrakis(μ‐2,3‐di­methoxy­benzoato)‐κ⁴O:O′;κ⁶O,O′:O′‐bis[(2,2′‐bi­pyridine‐N,N′)(2,3‐di­methoxy­benzoato‐O,O′)lanthanum(III)], [La₂(2,3‐DMOBA)₆(2,2′‐bpy)₂], where 2,3‐DMOBA is 2,3‐di­methoxy­benzoate (C₉H₉O₄) and 2,2′‐bpy is 2,2′‐bi­pyridine (C₁₀H₈N₂), is a dimer with a centre of inversion between the La atoms bridged by four carboxyl­ate ligands. The central La atom is ennea‐coordinated and has a distorted monocapped square‐antiprism geometry.     

Photophysical Properties and Photochemical Behaviour of Ruthenium(II) complexes containing the 2,2′-bipyridine and 4,4′-diphenyl-2,2′-bipyridine ligands

The temperature dependence of the emission lifetime of the series of complexes Ru(bpy)_n(4,4′-dpb) (bpy = 2,2′bipyridine, 4,4′-dpb = 4,4′-diphenyl-2,2′-bipyridine) has been studied in propionitrile/butyronitrile (4:5 v/v) solutions in the range 90–293 K. The obtained photophysical parameters show that the energy separation between the metal-to-ligand charge tranfer (³MLCT) emitting level and the photoreactive metal-centered (³MC) level changes across the series (ΔE = 3960, 4100, 4300, and 4700 cm^?1 for Ru(bpy)), Ru(bpy)2(4,4′-dpb)²⁺, Ru(bpy)(4,4′-dpb), and Ru(4,4′-dpb), respectively, where ΔE is the energy separation between the minimum of the ³MLCT potential curve and ³MLCT – ³MC crossing point. Comparison between spectral and electrochemical data indicated that the changes in ΔE are due to stabilization of the MLCT levels in complexes containing 4,4′-dpb with respect to Ru(bpy)²⁺₃. The photochemical data for the same complexes (as I^? salts) have been obtained in CH₂Cl₂ in the presence of 0.01M Cl^? upon irradiation at 462 nm. The complexes containing 4,4′-dpb are more photostable than Ru(bpy). Comparison between the data for thermal population of the ³MC photoreactive state and those for photochemistry indicated that the overall photochemical process is governed by (i) a thermal redistribution between the emitting and photoreactive excited states, and (ii) mechanistic factors, likely related to the size of the detaching ligand.