Quantum Dot Assembly for Light‐Driven Multielectron Redox Reactions,such as Hydrogen Evolution and CO2 Reduction

Light‐driven multielectron redox reactions (e.g., hydrogen (H₂) evolution, CO₂ reduction) have recently appeared at the front of solar‐to‐fuel conversion. In this Minireview, we focus on the recent advances in establishing semiconductor quantum dot (QD) assemblies to enhance the efficiencies of these light‐driven multielectron reduction reactions. Four models of QD assembly are established to promote the sluggish kinetics of multielectron transfer from QDs to cocatalysts, thus leading to an enhanced activity of solar H₂ evolution or CO₂ reduction. We also forecast the potential applications of QD assemblies in other multielectron redox reactions, such as nitrogen (N₂) fixation and oxygen (O₂) evolution from H₂O.     

Quantum Dot Assembly for Light‐Driven Multielectron Redox Reactions,such as Hydrogen Evolution and CO2 Reduction

Light‐driven multielectron redox reactions (e.g., hydrogen (H₂) evolution, CO₂ reduction) have recently appeared at the front of solar‐to‐fuel conversion. In this Minireview, we focus on the recent advances in establishing semiconductor quantum dot (QD) assemblies to enhance the efficiencies of these light‐driven multielectron reduction reactions. Four models of QD assembly are established to promote the sluggish kinetics of multielectron transfer from QDs to cocatalysts, thus leading to an enhanced activity of solar H₂ evolution or CO₂ reduction. We also forecast the potential applications of QD assemblies in other multielectron redox reactions, such as nitrogen (N₂) fixation and oxygen (O₂) evolution from H₂O.     

CuInS2量子点敏化太阳能电池中尺寸依赖的电子注入和光电性质

研究了CuInS₂（CIS）量子点敏化太阳能电池（QDSSCs）的电子注入和器件性能与粒子尺寸之间的依赖关系. 首先合成了不同尺寸的CuInS₂量子点（QDs）,制备了CuInS₂量子点敏化的TiO₂薄膜,并组装了量子点敏化太阳能电池. 通过循环伏安法确定了CuInS₂量子点的能级位置. 采用时间分辨荧光光谱分析测量了CuInS₂量子点到TiO₂薄膜的电子转移速率和效率. 结果发现,随着粒子尺寸从4.0 nm减小到2.5 nm,电子注入速率略微增加而电子注入效率减小,同时量子点敏化太阳能电池的开路电压基本不变,而光电转换效率、短路电流和填充因子（FF）均减小. 上述研究结果表明量子点敏化太阳能电池性能的优化可以通过改变量子点的尺寸来实现.     

Self-assembly of nanosized 0D clusters: CdS quantum dot-polyoxotungstate nanohybrids with strongly coupled electronic structures and visible-light-active photofunctions

Nanohybrids of CdS–polyoxotungstate with strongly coupled electronic structures and visible‐light‐active photofunctions can be synthesized by electrostatically derived self‐assembly of very small CdS quantum dots, or QDs, (particle size≈2.5 nm) and polyoxotungstate nanoclusters (cluster size≈1 nm). The formation of CdS–polyoxotungstate nanohybrids is confirmed by high‐resolution transmission electron microscopy, elemental mapping, and powder X‐ray diffraction analysis. Due to the strong electronic coupling between two semiconductors, the CdS–polyoxotungstate nanohybrids show a narrow bandgap energy of around 1.9–2.7 eV, thus reflecting their ability to harvest visible light. Time‐resolved photoluminescence experiments indicate that the self‐assembly between nanosized CdS and polyoxotungstate is very effective in increasing the lifetime of holes and electrons, thus indicating an efficient electron transfer between two‐component semiconductors. The hybridization results not only in a significant improvement in the photostability of CdS QD but also in the creation of visible‐light‐induced photochromism. Of particular importance is that the present nanohybrids show visible‐light‐driven photocatalytic activity to produce H₂ and O₂, which is superior to those of the unhybridized CdS and polyoxotungstate. The self‐assembly of nanometer‐level semiconductor clusters can provide a powerful way of optimizing the photoinduced functionalities of each component (i.e., visible‐induced photochromism and photocatalysis) by means of strong electronic coupling.     

Prolonged Hot Electron Dynamics in Plasmonic‐Metal/Semiconductor Heterostructures with Implications for Solar Photocatalysis

Ideal solar‐to‐fuel photocatalysts must effectively harvest sunlight to generate significant quantities of long‐lived charge carriers necessary for chemical reactions. Here we demonstrate the merits of augmenting traditional photoelectrochemical cells with plasmonic nanoparticles to satisfy these daunting photocatalytic requirements. Electrochemical techniques were employed to elucidate the mechanics of plasmon‐mediated electron transfer within Au/TiO₂ heterostructures under visible‐light (λ>515 nm) irradiation in solution. Significantly, we discovered that these transferred electrons displayed excited‐state lifetimes two orders of magnitude longer than those of electrons photogenerated directly within TiO₂ via UV excitation. These long‐lived electrons further enable visible‐light‐driven H₂ evolution from water, heralding a new photocatalytic paradigm for solar energy conversion.     

Quantum Dot‐Catalyzed Photoreductive Removal of Sulfonyl‐Based Protecting Groups

This Communication describes the use of CuInS₂/ZnS quantum dots (QDs) as photocatalysts for the reductive deprotection of aryl sulfonyl‐protected phenols. For a series of aryl sulfonates with electron‐withdrawing substituents, the rate of deprotection for the corresponding phenyl aryl sulfonates increases with decreasing electrochemical potential for the two electron transfers within the catalytic cycle. The rate of deprotection for a substrate that contains a carboxylic acid, a known QD‐binding group, is accelerated by more than a factor of ten from that expected from the electrochemical potential for the transformation, a result that suggests that formation of metastable electron donor–acceptor complexes provides a significant kinetic advantage. This deprotection method does not perturb the common NHBoc or toluenesulfonyl protecting groups and, as demonstrated with an estrone substrate, does not perturb proximate ketones, which are generally vulnerable to many chemical reduction methods used for this class of reactions.     

Visible‐Light‐Induced Photoredox Catalysis with a Tetracerium‐Containing Silicotungstate

The development of visible‐light‐induced photocatalysts for chemoselective functional group transformations has received considerable attention. Polyoxometalates (POMs) are potential materials for efficient photocatalysts because their properties can be precisely tuned by changing their constituent elements and structures and by the introduction of additional metal cations. Furthermore, they are thermally and oxidatively more stable than the frequently utilized organometallic complexes. The visible‐light‐responsive tetranuclear cerium(III)‐containing silicotungstate TBA₆[{Ce(H₂O)}₂{Ce(CH₃CN)}₂(μ₄‐O)(γ‐SiW₁₀O₃₆)₂] (CePOM; TBA=tetra‐n‐butylammonium) has now been synthesized; when CePOM was irradiated with visible light (λ>400 nm), a unique intramolecular Ce^III‐to‐POM(W^VI) charge transfer was observed. With CePOM, the photocatalytic oxidative dehydrogenation of primary and secondary amines as well as the α‐cyanation of tertiary amines smoothly proceeded in the presence of O₂ (1 atm) as the sole oxidant.     

Synergizing Electron and Heat Flows in Photocatalyst for Direct Conversion of Captured CO2

We report a ternary hybrid photocatalyst architecture with tailored interfaces that boost the utilization of solar energy for photochemical CO₂ reduction by synergizing electron and heat flows in the photocatalyst. The photocatalyst comprises cobalt phthalocyanine (CoPc) molecules assembled on multiwalled carbon nanotubes (CNTs) that are decorated with nearly monodispersed cadmium sulfide quantum dots (CdS QDs). The CdS QDs absorb visible light and generate electron-hole pairs. The CNTs rapidly transfer the photogenerated electrons from CdS to CoPc. The CoPc molecules then selectively reduce CO₂ to CO. The interfacial dynamics and catalytic behavior are clearly revealed by time-resolved and in situ vibrational spectroscopies. In addition to serving as electron highways, the black body property of the CNT component can create local photothermal heating to activate amine-captured CO₂, namely carbamates, for direct photochemical conversion without additional energy input.     

Incorporating Polyoxometalates into a Porous MOF Greatly Improves Its Selective Adsorption of Cationic Dyes

Various polyoxometalates (POMs) were successfully immobilized to the mesoporous coordination polymer MIL‐101 resulting in a series of POM–MOF composite materials POM@MIL‐101 (POM=K₄PW₁₁VO₄₀, H₃PW₁₂O₄₀, K₄SiW₁₂O₄₀). These materials were synthesized by a simple one‐pot reaction of Keggin POMs, tetramethylammonium hydroxide (TMAH), terephthalic acid (H₂bdc), and Cr³⁺ ions. XRD, FTIR, thermogravimetric analyses (TG), inductively coupled plasma (ICP) spectrometry, and energy‐dispersive X‐ray spectroscopy (EDX) collectively confirmed the successful combination of POMs and the porous framework. Further, these composites POM@MIL‐101 with different loading of POMs were achieved by variation of the POM dosage. Notably, the uptake capacity of MIL‐101 towards organic pollutants in aqueous solution was significantly improved by immobilization of hydrophilic POMs into cages of MIL‐101. An uptake capacity of 371 mg g^?1, comparable to that of the graphene oxide sponges, and much higher than that of the commercial activated carbon, was achieved at room temperature in 5 min when dipping 20 mg PW₁₁V@MIL‐101 in the methylene blue (MB) solution (100 mL of 100 mg L^?1 MB solution). Further study revealed that the POM@MIL‐101 composite materials not only exhibited a fast adsorption rate towards dye molecules, but also possessed of selective adsorption ability of the cationic dyes in wastewater. For example, the adsorption efficiency of PW₁₁V@MIL‐101 (10 mg) towards MB (100 mL of 10 mg L^?1) could reach 98 % in the initial 5 min, and it could capture MB dye molecules from the binary mixture of the MB and MO with similar size. Also, the POM@MIL‐101 materials could be readily recycled and reused, and no POM leached in the dye adsorption process.     

Redox properties of hybrid Dawson type polyoxometalates disubstituted with organo-silyl or organo-phosphoryl moieties

This paper reports on the electrochemical study of Dawson-type polyoxometalates (POMs) disubstituted with phenyl-phosphonate, phenyl silyl or tertbutylsilyl moieties. The polyanions were studied by cyclic voltammetry and on rotating disk electrode in acetonitrile with tetraphenylphosphonium chloride as supporting electrolyte. We found that these hybrid polyoxometalates can accept up to five electrons and that the organic substituents modify the first and second reduction potential of the POM compared to the unsubstituted POM [P₂W₁₈O₆₂]⁶⁻. Phenyl-phosphonate lowers the reduction potential, whereas the phenyl silyl or tertbutylsilyl moieties shift them cathodically. We also recorded by spectroelectrochemistry the spectrum of the monoreduced and the bisreduced species of the polyoxometalate disubstituted with phenyl-phosphonate.     

CdSe Quantum Dots and N719‐Dye Decorated Hierarchical TiO2 Nanorods for the Construction of Efficient Co‐Sensitized Solar Cells

Three‐dimensional hierarchical TiO₂ nanorods (HTNs) decorated with the N719 dye and 3‐mercaptopropionic or oleic acid capped CdSe quantum dots (QDs) in photoanodes for the construction of TiO₂ nanorod‐based efficient co‐sensitized solar cells are reported. These HTN co‐sensitized solar cells showed a maximum power‐conversion efficiency of 3.93 %, and a higher open‐circuit voltage and fill factor for the photoanode with 3‐mercaptopropionic acid capped CdSe QDs due to the strong electronic interactions between CdSe QDs, N719 dye and HTNs, and the superior light‐harvesting features of the HTNs. An electrochemical impedance analysis indicated that the superior charge‐collection efficiency and electron diffusion length of the CdSe QD‐coated HTNs improved the photovoltaic performance of these HTN co‐sensitized solar cells.     

Molecular Design of Polyoxometalate-Based Compounds for Environmentally-Friendly Functional Group Transformations: From Molecular Catalysts to Heterogeneous Catalysts

This review article summarizes our recent researches for molecular design of polyoxometalates (POMs) and their related compounds for environmentally-friendly functional group transformations. The divacant POM [γ-SiW₁₀O₃₄(H₂O)₂]⁴⁻ exhibits high catalytic performance for mono-oxygenation-type reactions including epoxidation of olefins and allylic alcohols, sulfoxidation, and hydroxylation of organosilanes with H₂O₂. We have successfully synthesized several POM-based molecular catalysts (metal-substituted POMs) with controlled active sites by the introduction of metal species into the divacant POM as a “structural motif”. These molecular catalysts can efficiently activate H₂O₂ (vanadium-substituted POM for epoxidation) and alkynes (copper-substituted POM for click reaction and oxidative homocoupling of alkynes). The aluminum-substituted POM exhibits Lewis acidic catalysis for diastereoselective cyclization of (+)-citronellal to (−)-isopulegol. In addition, we have developed POM-based “molecular heterogeneous catalysts” by the “solidification” and “immobilization” of catalytically active POMs.     

A Brief Overview of Some Physical Studies on the Relaxation Dynamics and Förster Resonance Energy Transfer of Semiconductor Quantum Dots

This article highlights some physical studies on the relaxation dynamics and Förster resonance energy transfer (FRET) of semiconductor quantum dots (QDs) and the way these phenomena change with size, shape, and composition of the QDs. The understanding of the excited‐state dynamics of photoexcited QDs is essential for technological applications such as efficient solar energy conversion, light‐emitting diodes, and photovoltaic cells. Here, our emphasis is directed at describing the influence of size, shape, and composition of the QDs on their different relaxation processes, that is, radiative relaxation rate, nonradiative relaxation rate, and number of trap states. A stochastic model of carrier relaxation dynamics in semiconductor QDs was proposed to correlate with the experimental results. Many recent studies reveal that the energy transfer between the QDs and a dye is a FRET process, as established from 1/d⁶ distance dependence. QD‐based energy‐transfer processes have been used in applications such as luminescence tagging, imaging, sensors, and light harvesting. Thus, the understanding of the interaction between the excited state of the QD and the dye molecule and quantitative estimation of the number of dye molecules attached to the surface of the QD by using a kinetic model is important. Here, we highlight the influence of size, shape, and composition of QDs on the kinetics of energy transfer. Interesting findings reveal that QD‐based energy‐transfer processes offer exciting opportunities for future applications. Finally, a tentative outlook on future developments in this research field is given.     

Formation of Surface Traps on Quantum Dots by Bidentate Chelation and Their Application in Low‐Potential Electrochemiluminescent Biosensing

Bidentate chelation, meso‐2,3‐dimercaptosuccinic acid (DMSA), was used as a stabilizer for the synthesis of CdTe quantum dots (QDs). The bidentate chelate QDs, characterized with FT‐IR, PL, and UV/Vis spectroscopy; element analysis; and high‐resolution transmission electron microscope, exhibited surface traps due to the large surface/volume ratio of QD particle and the steric hindrance of the DMSA molecule. The unpassivated surface of the QDs produced a narrower band gap than the core and electrochemiluminescent (ECL) emission at relatively low cathodic potential. In air‐saturated pH 7.0 buffer, the QDs immobilized on electrode surface showed an intense ECL emission peak at ?0.85 V (vs. Ag/AgCl). H₂O₂ produced from electrochemical reduction of dissolved oxygen was demonstrated to be the co‐reactant, which avoided the need of strong oxidant as the co‐reactant and produced a sensitive analytical method for peroxidase‐related analytes. Using hydroquinone/horseradish peroxidase/H₂O₂ as a model system, a new, reagentless, phenolic, ECL biosensor for hydroquinone was constructed, based on the quenching effect of ECL emission of QDs by consumption of co‐reactant H₂O₂. The biosensor showed a linear range of 0.2–10 μM with acceptable stability and reproducibility. This work opens new avenues in the search for new ECL emitters with excellent analytical performance and makes QDs a more attractive alternative in biosensing.     

Fluorescent cellulose aerogels containing covalently immobilized (ZnS)x(CuInS2)1−x/ZnS (core/shell) quantum dots

Photoluminiscent (PL) cellulose aerogels of variable shape containing homogeneously dispersed and surface-immobilized alloyed (ZnS)_x(CuInS₂)_1?x/ZnS (core/shell) quantum dots (QD) have been obtained by (1) dissolution of hardwood prehydrolysis kraft pulp in the ionic liquid 1-hexyl-3-methyl-1H-imidazolium chloride, (2) addition of a homogenous dispersion of quantum dots in the same solvent, (3) molding, (4) coagulation of cellulose using ethanol as antisolvent, and (5) scCO₂ drying of the resulting composite aerogels. Both compatibilization with the cellulose solvent and covalent attachment of the quantum dots onto the cellulose surface was achieved through replacement of 1-mercaptododecyl ligands typically used in synthesis of (ZnS)_x(CuInS₂)_1?x/ZnS (core–shell) QDs by 1-mercapto-3-(trimethoxysilyl)-propyl ligands. The obtained cellulose—quantum dot hybrid aerogels have apparent densities of 37.9–57.2 mg cm^?3. Their BET surface areas range from 296 to 686 m² g^?1 comparable with non-luminiscent cellulose aerogels obtained via the NMMO, TBAF/DMSO or Ca(SCN)₂ route. Depending mainly on the ratio of QD core constituents and to a minor extent on the cellulose/QD ratio, the emission wavelength of the novel aerogels can be controlled within a wide range of the visible light spectrum. Whereas higher QD contents lead to bathochromic PL shifts, hypsochromism is observed when increasing the amount of cellulose at constant QD content. Reinforcement of the cellulose aerogels and hence significantly reduced shrinkage during scCO₂ drying is a beneficial side effect when using α-mercapto-ω-(trialkoxysilyl) alkyl ligands for QD capping and covalent QD immobilization onto the cellulose surface.     

Photoresponsive Nanosheets of Polyoxometalates Formed by Controlled Self‐Assembly Pathways

Anionic Keggin polyoxometalates (POMs) and ether linkage‐enriched ammonium ions spontaneously self‐assemble into rectangular ultrathin nanosheets in aqueous media. The structural flexibility of the cation is essential to form oriented nanosheets; as demonstrated by single‐crystal X‐ray diffraction measurements. The difference in initial conditions exerts significant influence on selecting for self‐assembly pathways in the energy landscape. Photoillumination of the POM sheets in pure water causes dissolution of reduced POMs, which allowed site‐specific etching of nanosheets using laser scanning microscopy. By contrast, photoetching was suppressed in aqueous AgNO₃ and site‐selective deposition of silver nanoparticles occurred as a consequence of electron transfer from the photoreduced POMs to Ag⁺ ions on the nanosheet surface.     

Light‐Driven Electron Accumulation in a Molecular Pentad

Accumulation and temporary storage of redox equivalents with visible light as an energy input is of pivotal importance for artificial photosynthesis because key reactions, such as CO₂ reduction or water oxidation, require the transfer of multiple redox equivalents. We report on the first purely molecular system, in which a long‐lived charge‐separated state (τ≈870 ns) with two electrons accumulated on a suitable acceptor unit can be observed after excitation with visible light. Importantly, no sacrificial reagents were employed.     

Plasmonic Nickel–TiO2 Heterostructures for Visible‐Light‐Driven Photochemical Reactions

Plasmon‐mediated carrier transfer (PMCT) at metal–semiconductor heterojunctions has been extensively exploited to drive photochemical reactions, offering intriguing opportunities for solar photocatalysis. However, to date, most studies have been conducted using noble metals. Inexpensive materials capable of generating and transferring hot carriers for photocatalysis via PMCT have been rarely explored. Here, we demonstrate that the plasmon excitation of nickel induces the transfer of both hot electrons and holes from Ni to TiO₂ in a rationally designed Ni–TiO₂ heterostructure. Furthermore, it is discovered that the transferred hot electrons either occupy oxygen vacancies (V_O) or produce Ti³⁺ on TiO₂, while the transferred hot holes are located on surface oxygens at TiO₂. Moreover, the transferred hot electrons are identified to play a primary role in driving the degradation of methylene blue (MB). Taken together, our results validate Ni as a promising low‐cost plasmonic material for prompting visible‐light photochemical reactions.     

Electrografting of Diazonium‐Functionalized Polyoxometalates: Synthesis,Immobilisation and Electron‐Transfer Characterisation from Glassy Carbon

Polyoxometalates (POMs) are attractive candidates for the rational design of multi‐level charge‐storage materials because they display reversible multi‐step reduction processes in a narrow range of potentials. The functionalization of POMs allows for their integration in hybrid complementary metal oxide semiconductor (CMOS)/molecular devices, provided that fine control of their immobilisation on various substrates can be achieved. Owing to the wide applicability of the diazonium route to surface modification, a functionalized Keggin‐type POM [PW₁₁O₃₉{Ge(p‐C₆H₄‐C?C‐C₆H₄‐${{\rm N}{{+\hfill \atop 2\hfill}}}$ )}]^3? bearing a pending diazonium group was prepared and subsequently covalently anchored onto a glassy carbon electrode. Electron transfer with the immobilised POM was thoroughly investigated and compared to that of the free POM in solution.     

Ultrasensitive photochromism and impedance dual response to weak visible light by solvated Pb(II) modified polyoxomolybdate

Polyoxometalates (POMs) are important inorganic photochromic materials to be potentially applied in photo-induced switch, energy storage, and even the detection of light. However, due to the limited sensitivity of POMs, it is difficult to realize the photochromic response to weak visible light. In this paper, by the coordination of solvated Pb(II), a new structure-defined chain-like polyoxomolybdate complex of [(Pb(DMF)₄)₃(P₂Mo₁₈O₆₂)₂]_n (Pb₃Mo₁₈, DMF = dimethylformamide) has been demonstrated by a facile solvent-diffusion approach. By virtue of interactions between Pb(DMF)₄ and polyoxoanions, Pb₃Mo₁₈ shows an ultrasensitive photochromic response to weak visible lights and forms the reduced 'heteropoly blue' species through ligand-to-metal charge transfer (LMCT) process. A new mechanism is firstly proposed here that the 6s orbital lone electron pair on Pb(II) can effectively stabilize the generated hole of oxygen atoms as a result of O→Mo charge transfer. Through the proposed mechanism, the LMCT barrier is drastically lowered and allows the coloration to be occurred even upon weak visible light. Also, because the conductivity of Pb₃Mo₁₈ enhances with the increase of reduction extent, its electrochemical impedance signals are proportionally response to irradiation intensity. Especially, for the first time, the polyoxomolybdate composite can be used to detect weak visible light, in which the optical signal can be converted into electrical signal output. Moreover, Pb₃Mo₁₈ can be drip-coated on the surface of the screen printed chip electrode, which is facile to the detection of light by portable devices compatible with computers, mobile phones and other electronic equipment. This work not only highlights a new approach to the molecular design of photochromic POMs by the coordination of metal ions with the effect of inert electron pair, but also lays a foundation to extend the application of POMs as light signal sensors.