Synthesis of poly(vinylidene fluoride)‐b‐poly(styrene sulfonate) block copolymers by controlled radical polymerizations

Block copolymers based on poly(vinylidene fluoride), PVDF, and a series of poly(aromatic sulfonate) sequences were synthesized from controlled radical polymerizations (CRPs). According to the aromatic monomers, appropriate techniques of CRP were chosen: either iodine transfer polymerization (ITP) or atom transfer radical polymerization (ATRP) from PVDF‐I macromolecular chain transfer agents (CTAs) or PVDF‐CCl₃ macroinitiator, respectively. These precursors were produced either by ITP of VDF with C₆F₁₃I or by radical telomerization of VDF with chloroform, respectively. Poly(vinylidene fluoride)‐b‐poly(sodium styrene sulfonate), PVDF‐b‐PSSS, block copolymers were produced from both techniques via a direct polymerization of sodium styrene sulfonate (SSS) monomer or an indirect way with the use of styrene sulfonate ethyl ester (SSE) as a protected monomer. Although the reaction led to block copolymers, the kinetics of ITP of SSS showed that PVDF‐I macromolecular CTAs were not totally efficient because a limitation of the CTA consumption (56%) was observed. This was probably explained by both the low activity of the CTA (that contained inefficient PVDF‐CF₂CH₂? I) and a fast propagation rate of the monomer. That behavior was also noted in the ITP of SSE. On the other hand, ATRP of SSS initiated by PVDF‐CCl₃ was more controlled up to 50% of conversion leading to PVDF‐b‐PSSS block copolymer with an average number molar mass of 6000 g·mol^?1. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel Source of Trifluoromethyl Radical As Efficient Initiator for the Polymerization of Vinylidene Fluoride

A persistent perfluoroalkyl radical (PPFR), perfluoro‐3‐ethyl‐2,4‐dimethyl‐3‐pentyl, is shown to be a good source of •CF₃ radicals and a useful radical capable of initiating the polymerization of vinylidene fluoride (VDF). NMR characterizations of the resulting PVDF homopolymers showed that polymerization of VDF was exclusively initiated by •CF₃ radicals. The addition of •CF₃ radical onto VDF was regioselective leading to CF₃‐CH₂‐CF₂‐PVDF and the CF₃ end‐group acted as an efficient label to assess the molecular weights by ¹⁹F NMR spectroscopy. Various [PPFR]₀/[VDF]₀ initial molar ratios lead to CF₃–PVDF–CF₃ of different molecular weights. When that ratio decreased, both the molecular weights and the thermostability of these PVDFs increased, showing less defects of chaining and higher crystallinity.     

Fast copper catalyzed living radical polymerization of acrylonitrile utilizing a high concentration of radical initiator

This article first reports a fast and controlled living radical polymerization (LRP) of acrylonitrile, evidenced by 81.3% monomer conversion within 40 min and well‐defined the polymers with a narrow polydispersity index (PDI) range of 1.14?1.38. This was achieved by utilizing azobis(isobutyronitrile) as radical initiator with a high concentration up to 190 mM and CuBr₂ as catalyst with a very low concentration down to 50 ppm. The polymerization displayed typical LRP characteristics, including pseudo first‐order kinetics of polymerization, the linear increase of number‐average molecular weights (MWs), low PDI values. The influence of various experimental components, radical initiator concentration, catalyst concentration, and reaction temperature, on the polymerization reaction and MW as well as PDI has been investigated in detail. ¹H NMR and gel permeation chromatography analyses as well as chain extension reaction confirmed the very high chain‐end functionality of the resultant polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Controlled Radical Polymerization of Ethylene Using Organotellurium Compounds

The first successfully controlled radical polymerization (CRP) of ethylene is reported using several organotellurium chain‐transfer agents (CTAs) under mild conditions (70 °C, 200 bar of ethylene) within the concept of organotellurium‐mediated radical polymerization (TERP). In contrast to preceding works on CRPs of ethylene applying reversible addition–fragmentation chain‐transfer (RAFT), the TERP system provided a high livingness and chain‐end functionalization of polyethylene chains. Molar‐mass distributions with dispersities between 1.3 and 2.1 were obtained up to average molar masses of 5000 g mol^?1. As in the RAFT system, the high reactivity of the growing polyethylenyl radical led to an inherent side reaction. For the presented TERP systems, however, this side reaction did not result in dead chains, while it could even be effectively suppressed by a good choice of the CTA.     

Ligand‐free SET‐DTLRP of MMA at room temperature

An iodine‐based initiator, 2‐iodo‐2‐methylpropionitrile (CPI), was utilized for the single‐electron transfer and degenerative chain transfer mediated living radical polymerization (SET‐DTLRP) of methyl methacrylate (MMA) in the absence of ligand, at ambient temperature. The CPI‐initiated ligand‐free polymerizations manifested reasonable control over molecular weights with relatively narrow distributions (M_w/M_n ≤ 1.35). The living nature of the polymers was further confirmed by successful chain extension reaction and ¹H NMR with high chain‐end fidelity (～96%). Screening of the available solvents suggested that the controllability of this polymerization was highly dependent on the kind of solvents, wherein dimethyl sulfoxide was a better solvent for a controlled molecular weight. The proposed ligand‐free SET‐DTLRP initiated by CPI was intriguing since it would dramatically decrease the concentration of Cu(0) ions both in polymerization system and resultant polymer, and provided a more economical and eco‐friendly reversible‐deactivation radical polymerization technique. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Copper(0)‐mediated living radical polymerization of acrylonitrile: SET‐LRP or AGET‐ATRP

Cu(0)‐mediated living radical polymerization was first extended to acrylonitrile (AN) to synthesize polyacrylonitrile with a high molecular weight and a low polydispersity index. This was achieved by using Cu(0)/hexamethylated tris(2‐aminoethyl)amine (Me₆‐TREN) as the catalyst, 2‐bromopropionitrile as the initiator, and dimethyl sulfoxide (DMSO) as the solvent. The reaction was performed under mild reaction conditions at ambient temperature and thus biradical termination reaction was low. The rapid and extensive disproportionation of Cu(I)Br/Me₆‐TREN in DMSO/AN supports a mechanism consistent with a single electron transfer‐living radical polymerization (SET‐LRP) rather than activators generated by electron transfer atom transfer radical polymerization (AGET ATRP). ¹H NMR analysis and chain extension experiment confirm the high chain‐end functionality of the resultant polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Pursuit of reinitiation efficiency of resonance‐stabilized monomeric allyl radical generated via “degradative monomer chain transfer” in allyl polymerization

For a deeper understanding of allyl polymerization mechanism, the reinitiation efficiency of resonance‐stabilized monomeric allyl radical was pursued because in allyl polymerization it is commonly conceived that the monomeric allyl radical generated via the allylic hydrogen abstraction of growing polymer radical from monomer, i.e., “degradative monomer chain transfer,” has much less tendency to initiate a new polymer chain and, therefore, this monomer chain transfer is essentially a termination reaction. Based on the renewed allyl polymerization mechanism in our preceding article, the monomer chain transfer constant in the polymerization of allyl benzoate was estimated to be 2.7 × 10^?2 at 80 °C under the polymerization condition, where the coupling termination reaction of growing polymer radical with allyl radical was negligible and, concurrently, the reinitiation reaction of allyl radical was enhanced significantly. The reinitiation efficiencies of monomeric allyl radical were pursued by the dead‐end polymerizations of allyl benzoate at 80, 105, and 130 °C using a small amount of initiators; they increased remarkably with raised temperature. Thus, the enhanced reinitiation reactivity of allyl radical at an elevated temperature could bias the well‐known degradative monomer chain transfer characteristic of allyl polymerization toward the chain transfer in common vinyl polymerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A Study on End Group Characterization of Poly(phenacyl methacrylate) Polymer Produced by Free Radical Polymerization

Free‐radical homopolymerization and copolymerization of phenacyl methacrylate (PAMA) with methyl methacrylate (MMA) was done using 2,2′‐azobis(isobutyronitrile) (AIBN) as the initiator in 1,4‐dioxane at 60°C. ¹H‐NMR and FT‐IR spectroscopy confirmed the existence of OCH₂ and CH signals and unsaturated structure and CN stretch at the chain end of low molecular weight poly(phenacyl methacrylate) [poly(PAMA)], respectively. The six‐membered ring with both ester and ether at the end group was detected by ¹H‐NMR. In the poly(PAMA), the end groups formed due to chain transfer reactions were found in large concentrations. The mechanism of the formation of end groups has been presented. The behavior of free radical polymerization of PAMA was compared with that of phenoxycarbonylmethyl methacrylate (PCMMA). The molecular weight distribution of the homo and copolymers was determined using gel permeation chromatography. Thermal properties of the polymers were determined using differential thermal analysis (DTA) and thermogravimetric analysis (TGA).     

A Study on End Group Characterization of Poly(phenacyl methacrylate) Polymer Produced by Free Radical Polymerization

Free‐radical homopolymerization and copolymerization of phenacyl methacrylate (PAMA) with methyl methacrylate (MMA) was done using 2,2′‐azobis(isobutyronitrile) (AIBN) as the initiator in 1,4‐dioxane at 60°C. ¹H‐NMR and FT‐IR spectroscopy confirmed the existence of OCH₂ and CH signals and unsaturated structure and CN stretch at the chain end of low molecular weight poly(phenacyl methacrylate)[poly(PAMA)], respectively. The six‐membered ring with both ester and ether at the end group was detected by ¹H‐NMR. In the poly(PAMA), the end groups formed due to chain transfer reactions were found in large concentrations. The mechanism of the formation of end groups has been presented. The behavior of free radical polymerization of PAMA was compared with that of phenoxycarbonylmethyl methacrylate (PCMMA). The molecular weight distribution of the homo and copolymers was determined using gel permeation chromatography. Thermal properties of the polymers were determined using differential thermal analysis (DTA) and thermogravimetric analysis (TGA).     

A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

Functionalization of polymers prepared by ATRP using radical addition reactions

Low molecular weight linear poly(methyl acrylate), star and hyperbranched polymers were synthesized using atom transfer radical polymerization (ATRP) and end‐functionalized using radical addition reactions. By adding allyltri‐n‐butylstannane at the end of the polymerization of poly(methyl acrylate), the polymer was terminated by allyl groups. When at high conversions of the acrylate monomer, allyl alcohol or 1,2‐epoxy‐5‐hexene, monomers which are not polymerizable by ATRP, were added, alcohol and epoxy functionalities respectively were incorporated at the polymer chain end. Functionalization by radical addition reactions was demonstrated to be applicable to multi‐functional polymers such as hyperbranched and star polymers.     

Atom transfer radical polymerization directly from poly(vinylidene fluoride): Surface and antifouling properties

The direct preparation of grafting polymer brushes from commercial poly (vinylidene fluoride) (PVDF) films with surface‐initiated atom transfer radical polymerization (ATRP) is demonstrated. The direct initiation of the secondary fluorinated site of PVDF facilitated grafting of the hydrophilic monomers from the PVDF surface. Homopolymer brushes of 2‐(N,N‐dimethylamino)ethyl methacrylate (DMAEMA) and poly (ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the PVDF surface. The chemical composition and surface topography of the graft‐functionalized PVDF surfaces were characterized by X‐ray photoelectron spectroscopy, attenuated total reflectance/Fourier transform infrared spectroscopy, and atomic force microscopy. A kinetic study revealed a linear increase in the graft concentration of poly[2‐(N,N‐dimethylamino)ethyl methacrylate] (PDMAEMA) and poly[poly(ethylene glycol) monomethacrylate] (PPEGMA) with the reaction time, indicating that the chain growth from the surface was consistent with a controlled or living process. The living chain ends were used as macroinitiators for the synthesis of diblock copolymer brushes. The water contact angles on PVDF films were reduced by the surface grafting of DMAEMA and PEGMA. Protein adsorption experiments revealed a substantial antifouling property of PPEGMA‐grafted PVDF films and PDMAEMA‐grafted PVDF films in comparison with the pristine PVDF surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3434–3443, 2006     

Electrochemically mediated atom transfer radical polymerization with dithiocarbamates as alkyl pseudohalides

Electrochemically mediated atom transfer radical polymerizations (ATRPs) provide well‐defined polymers with designed dispersity as well as under external temporal and spatial control. In this study, 1‐cyano‐1‐methylethyl diethyldithiocarbamate, typically used as chain‐transfer agent (CTA) in reversible addition–fragmentation chain transfer (RAFT) polymerization, was electrochemically activated by the ATRP catalyst Cu^I/2,2′‐bipyridine (bpy) to control the polymerization of methyl methacrylate. Mechanistic study showed that this polymerization was mainly controlled by the ATRP equilibrium. The effect of applied potential, catalyst counterion, catalyst concentration, and targeted degree of polymerization were investigated. The chain‐end functionality was preserved as demonstrated by chain extension of poly(methyl methacrylate) with n‐butyl methacrylate and styrene. This electrochemical ATRP procedure confirms that RAFT CTAs can be activated by an electrochemical stimulus. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 376–381     

Conformational changes and phase transformation mechanisms in PVDF solution‐cast films

The supramolecular crystal structure in poly(vinylidene fluoride) (PVDF) solution‐cast films is studied through changing crystallization conditions in two solvents of different structures and polarities. The crystalline‐state chain conformations of isothermally solution‐crystallized PVDF in N, N‐dimethylacetamide (DMAc), and cyclohexanone are studied through the specific FTIR absorption bands of α, β, and γ phase crystals. There are no changes in the FTIR spectra of cyclohexanone solution‐crystallized films in the temperature range of 50–120 °C. In the case of DMAc solution‐crystallized films, low temperature crystallization mainly results in formation of trans states (β and γ phases), whereas at higher temperatures gauche states become more populated (α phase). This is due to the variations in solvent polarity and ability to induce a specific conformation in PVDF chains, through the changes in chain coil dimensions. This indicates that in spite of cyclohexanone solutions, the intermolecular interactions between PVDF and DMAc are temperature‐sensitive and more important in stabilizing conformations of PVDF in crystalline phase than temperature dependence of PVDF chain end‐to‐end distance <r²>. The high‐resolution ¹⁹F NMR spectroscopy also showed little displacement in PVDF characteristic chemical shifts probably due to changes in PVDF chain conformation resulting from temperature variations. Upon uniaxial stretching of the prepared films under certain conditions, contribution of trans state becomes more prominent, especially for the originally higher α phase‐containing films. Due to formation of some kink bands during film stretching and phase transformation, α phase absorption bands are still present in infrared spectra. Besides, uniaxial stretching greatly enhances piezoelectric properties of the films, maybe due to formation of oriented β phase crystals, which are of more uniform distribution of dipole moments. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3487–3495, 2004     

Living radical polymerization of diisopropyl fumarate to obtain block copolymers containing rigid poly(substituted methylene) and flexible polyacrylate segments

Living radical polymerizations of diisopropyl fumarate (DiPF) are carried out to synthesize poly(diisopropyl fumarate) (PDiPF) as a rigid poly(substituted methylene) and its block copolymers combined with a flexible polyacrylate segment. Reversible addition‐fragmentation chain transfer (RAFT) polymerization is suitable to obtain a high‐molecular‐weight PDiPF with well‐controlled molecular weight, molecular weight distribution, and chain‐end structures, while organotellurium‐mediated living radical polymerization (TERP) and reversible chain transfer catalyzed polymerization (RTCP) give PDiPF with controlled chain structures under limited polymerization conditions. In contrast, controlled polymerization for the production of high‐molecular‐weight and well‐defined PDiPF is not achieved by atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMP). The block copolymers consisting of rigid poly(substituted methylene) and flexible polyacrylate segments are synthesized by the RAFT polymerization. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2136–2147     

End‐Group Characterization of Poly(acrylic acid) Prepared by Nitroxide‐Mediated Controlled Free‐Radical Polymerization

Summary: A low‐molar‐mass poly(acrylic acid) with a narrow molar‐mass distribution, prepared by SG1 nitroxide‐mediated controlled free‐radical polymerization, was subjected to end‐group analysis to confirm its living nature. ¹H and ³¹P NMR spectroscopy confirmed the presence of the SG1‐based alkoxyamine end group. Furthermore, chain extension with styrene and n‐butyl acrylate demonstrated the ability of the homopolymer to initiate the polymerization of a second block. These results open the door to the synthesis of poly(acrylic acid)‐based block copolymers by direct nitroxide‐mediated polymerization of acrylic acid.

Acrylic acid polymerization using an alkoxyamine initiator based on SG1 (N‐tert‐butyl‐N‐(1‐diethyl phosphono‐2,2‐dimethylpropyl) nitroxide resulting in a homopolymer capable of initiating the polymerization of a second block.     

“Nascent” Cu(0) nanoparticles‐mediated single electron transfer living radical polymerization of acrylonitrile at ambient temperature

Zn(0)/ppm concentrations of CuBr₂ from 10 to 50 ppm was firstly used to catalyze radical polymerization of acrylonitrile at ambient temperature. The polymerization displayed typical living radical polymerization (LRP) characteristics, as evidenced by pseudo first‐order kinetics of polymerization, linear increase of number‐average molecular weight, and low polydispersity index (PDI) value. Effects of solvent, copper concentration, and initiator concentration on the polymerization reaction and molecular weight as well as PDI were investigated in detail. EC excelled NMP, DMF, and DMSO in terms of rate of polymerization as well as control of molecular weight and PDI. The increase of the copper concentration from 2.5 to 50 ppm leads to a higher rate of polymerization and a better control over the polymerization reaction. ¹H NMR and GPC analyses as well as chain extension reaction confirmed the very high chain‐end functionality of the resultant polymer. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Carbon Dots as a Promising Green Photocatalyst for Free Radical and ATRP‐Based Radical Photopolymerization with Blue LEDs

Carbon dots (CDs) have been used for the first time as a sensitizer to initiate and activate free radical and controlled radical polymerization, respectively, based on an ATRP protocol with blue LEDs. Consideration of diverse heteroatom‐doped CDs indicated that N‐doped CDs could serve as an effective photocatalyst and photosensitizer in combination with LEDs emitting either at 405 nm or 470 nm. Free radical polymerization was initiated by combining the CDs with an iodonium or sulfonium salt in tri(propylene glycol) diacrylate. Polymerization of methyl methacrylate (MMA) by photo‐induced ATRP was achieved with CDs and ethyl α‐bromophenylacetate using Cu^II as catalyst in the ppm range. The polymers obtained showed temporal control, narrower dispersity ?1.5, and chain‐end fidelity. The first‐order kinetics and ON/OFF experiments additionally gave evidence of the constant concentration of polymer radicals. No remarkable cytotoxic activity was observed for the CDs, underlining their biocompatibility.     

Synthesis of amphiphilic ABC triblock copolymers by single electron transfer nitroxide radical coupling reaction in tetrahydrofuran

A series of ABC triblock copolymers, that is, polyisoprene‐block‐polystyrene‐block‐poly(ethylene oxide) (PI‐PS‐PEO), PI‐block‐poly(tert‐butyl acrylate)‐block‐PEO (PI‐PtBA‐PEO), and PI‐block‐poly(acrylic acide)‐block‐PEO (PI‐PAA‐PEO) were obtained by combination of anionic technique, atom transfer radical polymerization (ATRP), and single electron transfer nitroxide coupling (SETNRC) reaction. Anionic polymerization of isoprene followed by end capping with ethylene oxide yielded hydroxyl‐terminated PI. After esterification, PI with Br end group was used as a macroinitiator to initiate the polymerization of styrene and tBA by ATRP that was then trapped by 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) group in PEO by SETNRC reaction rapidly with high efficiency in tetrahydrofuran at room temperature. The effect of reaction time and polymer chain length on SETNRC reaction was discussed in detail. In the presence of Cu⁰/tris[2‐(dimethylamino)ethyl]amine, SETNRC between PI‐PS‐Br and PEO‐TEMPO was carried out with the efficiency of up to 91.6% in 2 h. With the increase in polymer chain length, the efficiency decreased fleetly. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Heteroatom‐Doped Carbon Dots (CDs) as a Class of Metal‐Free Photocatalysts for PET‐RAFT Polymerization under Visible Light and Sunlight

A key challenge of photoregulated living radical polymerization is developing efficient and robust photocatalysts. Now carbon dots (CDs) have been exploited for the first time as metal‐free photocatalysts for visible‐light‐regulated reversible addition–fragmentation chain‐transfer (RAFT) polymerization. Screening of diverse heteroatom‐doped CDs suggested that the P‐ and S‐doped CDs were effective photocatalysts for RAFT polymerization under mild visible light following a photoinduced electron transfer (PET) involved oxidative quenching mechanism. PET‐RAFT polymerization of various monomers with temporal control, narrow dispersity (?≈1.04), and chain‐end fidelity was achieved. Besides, it was demonstrated that the CD‐catalyzed PET‐RAFT polymerization was effectively performed under natural solar irradiation.