EuF3 纳米晶/PNIPAm复合水凝胶的制备及荧光温敏性能

以十一烯酸为表面活性剂, 采用液体-固体-溶液法(LSS)制备了EuF3纳米晶; 将其用CCl4处理, 得到表面修饰有C-Cl基团的功能化EuF3纳米晶; 通过原子转移自由基聚合(ATRP)制备EuF3 /聚N-异丙基丙烯酰胺(EuF3/PNIPAm)复合温敏水凝胶. 采用HRTEM, XRD, FTIR, DSC及PL等对EuF3 纳米晶及EuF3/ PNIPAm 复合凝胶的微观结构与性能进行了表征, 用变温荧光光谱研究了环境温度对复合凝胶荧光性能的影响. 结果表明, EuF3纳米晶呈六方相晶型; 粒径呈多分散分布, 且相对集中于10, 20和50 nm. 该复合凝胶的较低临界溶解温度(LCST)随纳米晶含量的增加而下降, 环境温度与纳米晶含量对复合凝胶的荧光特性产生明显影响.     

EuF3-NaYF4纳米晶/PNIPAm三元复合凝胶的荧光温敏行为与影响机制

分别采用水热法制备EuF3与NaYF4纳米晶, 与N-异丙基丙烯酰胺（NIPAm）混合后进行自由基聚合, 一步法合成EuF3-NaYF4纳米晶/聚N-异丙基丙烯酰胺（PNIPAm）三元复合凝胶。 对纳米晶与复合凝胶的结构与荧光性能进行了表征。 重点研究了三元复合凝胶的荧光温敏行为, 并对其影响机制进行了探讨。 结果表明, EuF3与NaYF4纳米晶在PNIPAm凝胶基体中的体相掺杂, 同样产生了明显的能量传递。 两种纳米晶相对含量的变化, 对复合凝胶的荧光温敏性能有重要影响。     

AuNPs/PNIPAM复合颗粒的制备及其温敏性质

将金纳米颗粒(AuNPs)组装到聚N-异丙基丙烯酰胺(PNIPAM)水凝胶微球表面制备出AuNPs/PNIPAM复合颗粒. 将PNIPAM 凝胶的温敏特性与AuNPs的光学性质结合, 通过改变温度调节AuNPs的局部表面等离子共振(LSPR)吸收峰位置. 研究结果表明, 温度升高使AuNPs的LSPR吸收峰发生红移, 并且这种效应是可逆的. 同时发现, AuNPs的光学性质还可以作为表征PNIPAM水凝胶微球温敏行为的一种手段. 利用透射电镜、紫外-可见光谱仪及动态光散射仪对AuNPs/PNIPAM复合颗粒的形貌、光学性质、粒径变化等进行了分析.     

荧光CdS纳米晶的合成与表征

采用有机金属液相法,在较低温度下制备了高质量的荧光CdS纳米晶.TEM、UV-Vis、PL及XRD等研究表明,表面活性剂的浓度、反应时间及反应物配比等对所制备的CdS纳米晶的形貌与尺寸、光谱性能及结晶性能等具有显著的影响.控制合适的反应条件,可以获得单分散、光谱性能优异且结晶性好的CdS纳米晶.     

一锅法制备YF_3:Yb~(3+)-Er~(3+)纳米晶复合PNIPAm-co-PAA纳凝胶及其荧光温敏行为

采用巯基乙胺为配体,以硝酸铒(Er(NO3)3),硝酸镱(Yb(NO3)3),硝酸钇(Y(NO3)3)和氟化铵(NH4F)为原料,水热法制备表面含NH2基团的活性YF3:Yb3+-Er3+纳米晶;以过硫酸钾(K2S2O8)为引发剂,借助1-乙基-(3-二甲基氨基丙基)碳酰二亚胺(EDC)与N-羟基丁二酰亚胺(NHS)的偶联反应,在活性纳米晶存在下,进行N-异丙基丙烯酰胺(NIPAm),N,N'-亚甲基双丙烯酰胺(BIS)与丙烯酸的自由基共聚合,一锅法制备了YF3:Yb3+-Er3+/PNIPAm-co-PAA荧光温敏纳凝胶.对制备的纳米晶及纳凝胶的结构与荧光性能进行了表征.结果表明,纳米晶的粒径为6~10 nm,呈单分散分布;纳凝胶的粒径呈多分散分布,粒径主要分布在100~300 nm.PL光谱分析表明,活性YF3:Yb3+-Er3+纳米晶的4F7/2→4I15/2跃迁,在483和496 nm处产生明显的能级劈裂;纳凝胶中,该能级劈裂依然存在,但随温度升高发生耦合;环境温度对纳凝胶的上转换发光强度产生明显影响.     

CdS纳米晶@碳点复合物膜的电致化学发光

采用热解柠檬酸法制备碳点(CDs),并将之与表面无包裹剂的CdS纳米晶(CdS NCs)超声复合制备CdS纳米晶@碳点(CdS NCs@CDs)复合物。研究了复合物膜阴极电致化学发光(ECL),探讨了CDs对CdS纳米晶膜ECL增强的机理。CDs分散性良好、尺寸在1.5~4 nm之间;与粒径约为4 nm的CdS纳米晶按体积比2∶3复合后,在360 nm光激发下复合物具有最强的荧光发射且表现为CDs的荧光。同时,复合物膜产生归属于激发态CdS纳米晶的最强的ECL发射,且ECL发光峰起置电势正移至-1.05 V。复合物膜的ECL发射是pH依赖的,在pH值为6时,复合物膜具有最大的ECL强度,为CdS纳米晶膜ECL强度的19倍。这种ECL增强源于CDs能束缚大量电子产生局域电场从而促进近邻CdS纳米晶激发态的形成与弛豫。     

溶剂热法合成CdS纳米晶及其光学性质研究

以硫脲和醋酸镉为原料,采用溶剂热法在不同的反应介质和温度下合成了CdS纳米晶,比较了单胺与双胺对合成CdS纳米晶形貌的影响。采用透射电镜(TEM)、X射线粉末衍射仪(XRD)和荧光分光光度计(PL)对合成的CdS纳米晶结构和光学性能进行表征。结果表明:反应温度和反应介质对其形貌有影响,在双胺的条件下,60℃时合成了纯相的六方相CdS纳米棒;双胺条件下更易生成纳米棒,且高温下晶体的结晶性更好。PL分析表明,水(溶剂)热法制备的CdS的荧光光谱图与大多数CdS类似,均在440~480 nm和550 nm处存在发射峰,但较宽的发射峰蓝移说明材料的光学性质受到材料形貌和制备方法的影响。     

Q-CdS/聚合物纳米复合膜的制备与荧光性能

采用配位化学合成原理 ,分离制备出颗粒尺寸小于 10nm的单分散性的Q态CdS(Q CdS)纳米粒子 ,将Q CdS纳米粒子与聚合物复合成膜 ,制备出一系列Q CdS 聚合物纳米复合膜 .用紫外可见吸收光谱与透射电镜研究了纳米复合膜的量子尺寸效应和分散性 .通过荧光光谱探讨了不同聚合物基体材料和不同Q CdS含量的纳米复合膜的荧光发光性能 .结果表明 ,一方面这种以聚合物为基体的纳米复合膜 ,由于聚合物与Q CdS之间的相互作用 ,使纳米复合膜表现出与单一相组分完全不同的特征荧光发射峰 ;另一方面 ,随着纳米复合膜中Q CdS含量的不断增大 ,纳米复合膜的荧光强度不断增强 ,在一定浓度时达到最大值 .     

CdS量子点敏化ZnO纳米棒阵列电极的制备和光电化学性能

采用连续式离子层吸附与反应法制备了CdS量子点敏化的ZnO纳米棒电极.应用扫描电子显微镜(SEM)、X射线衍射(XRD)和透射电子显微镜(TEM)对CdS量子点/ZnO纳米棒电极的形貌、晶型和颗粒尺寸进行了分析和表征;采用光电流-电位曲线和光电流谱研究了不同CdS循环沉积次数及不同沉积浓度对复合电极的光电性能影响.结果表明,前驱体浓度都为0.1mol·L-1且沉积15次敏化后的ZnO纳米棒阵列电极光电性能最好.与单纯的ZnO纳米棒阵列电极和单纯的CdS量子点电极相比,其光电转换效率显著提高,单色光光子-电流转换效率(IPCE)在380nm处达到76%.这是因为CdS量子点可以拓宽光的吸收到可见光区,并且在所形成的界面上光生载流子更容易分离.荧光光谱实验进一步说明了光电增强的原因是,两者间形成的界面中表面态大大减少,有利于减少光生电子和空穴的复合.     

CdSe/CdS/SiO2复合纳米球的制备及发光性能

采用两相法合成了CdSe/CdS核-壳结构的量子点, 用氨水催化水解正硅酸乙酯制得复合结构的CdSe/CdS/SiO₂发光纳米球. 通过对量子点用量、氨水用量、反应时间及溶剂比例等实验条件的调节, 得到了单分散性较好, 尺寸在23~145 nm的复合发光纳米球. 利用紫外-可见吸收光谱和荧光发射光谱对其发光性能进行了研究, 同时利用透射电镜(TEM)观察复合纳米球的形貌. 结果表明, 复合发光纳米球样品的最高荧光量子产率可达8%.     

Switchable photoluminescence of CdTe nanocrystals by temperature-responsive microgels

In the present study, we report a method for preparing a fluorescent thermosensitive hybrid material based on monodisperse, thermosensitive poly( N-isopropyl acrylamide) (PNIPAM) microgels covered with CdTe nanocrystals of 3.2 nm diameter. The CdTe nanocrystals were covalently immobilized on the surface of PNIPAM microgels. The chemical environment around the CdTe nanocrystals was modified by changing the temperature and inducing the microgel volume-phase transition. This change provoked a steep variation in the nanocrystal photoluminescence (PL) intensity in such a way that when the temperature was under the low critical solution temperature (LCST) of the polymer (36 degrees C) the PL of the nanocrystals was strongly quenched, whereas above the LCST the PL intensity was restored.     

Preparation and application of L-cysteine-modified CdSe/CdS core/shell nanocrystals as a novel fluorescence probe for detection of nucleic acid

The water-soluble L-cysteine-modified CdSe/CdS core/shell nanocrystals (expressed as CdSe/CdS/Cys nanocrystals) have been synthesized in aqueous by using L-cysteine as stabilizer. The size, shape, component and spectral property of CdSe/CdS/Cys nanocrystals were characterized by high-resolution transmission electron microscope (HRTEM), energy dispersive X-ray fluorescence (EDX), infrared spectrum (IR) and photoluminescence (PL). The results showed that the spherical CdSe/CdS/Cys nanocrystals with an average diameter of 2.3 nm have favorable fluorescent property, theirs photostability and fluorescence intensity are enhanced greatly after overcoating with CdS. The cysteine modified on the surface of core/shell CdSe/CdS nanocrystals renders the nanocrystals water-soluble and biocompatible. Based on the fluorescence quenching of the nanocrystals in the presence of calf thymus deoxyribonucleic acid (ct-DNA), a fluorescence quenching method has been developed for the determination of ct-DNA by using the nanocrystals as a novel fluorescence probe. The pH value of the system was selected at pH 7.4, with excitation and emission wavelength at 380 and 522 nm, respectively. Under the optimal conditions, the fluorescence quenching intensity of the system is linear with the concentration of ct-DNA in the range of 0.1-3.5 microg/mL (r=0.9987). The detection limit is 0.06 microg/mL. And two synthetic samples were analyzed satisfactorily.     

CdS量子点的一步法合成及量子产率

以油酸为配体,十八烯为溶剂,采用一步法合成了CdS量子点,研究了反应温度、反应时间和Cd/S的摩尔比对量子点光谱性能的影响.X射线衍射(XRD)和高分辨透射电镜(HRTEM)测试结果表明,所获得的CdS量子点为立方闪锌矿结构,且尺寸分布均一,结晶度高,其较强的带边发光、尖锐的紫外吸收峰以及狭窄的荧光发射峰进一步表明量子...     

Temperature-modulated photoluminescence of quantum dots

Cadmium sulfide (CdS) quantum dots (QDs) grafted with thermoresponsive poly( N-isopropylacrylamide) chains have been prepared. As the temperature increases, PNIPAM chains shrink and aggregate so that the QDs exhibit enhanced fluorescence emission. At a temperature around the lower critical solution temperature (LCST) of PNIPAM, the fluorescence exhibits a maximum intensity. Our experiments reveal that the fluorescence emission is determined by the interactions between QDs as a function of the interdot distance. The optical interdot distance for the maximum luminescence intensity is approximately 10 nm. The chain length of PNIPAM also has an effect on the luminescence. Short PNIPAM chains are difficult to associate, leading to a large interdot distance, so that the luminescence intensity changes slightly with temperature.     

溶剂热合成单分散硫化镉纳米晶

在双表面活性剂十八胺和油酸存在条件下, 以氯化镉和硫粉作为反应前驱物, 通过简单的溶剂热方法合成单分散性闪锌矿硫化镉纳米晶, 粒径大小在13 nm. 用X射线衍射(XRD)、透射电子显微镜(TEM)对产物的结构和形貌进行了表征, 同时对硫化镉纳米晶的紫外吸收谱和光致发光谱(PL)性能进行了表征. 实验结果表明合成的样品具有很好的发光性能, 此外溶剂热反应的温度对纳米晶的单分散性有重要影响. 并对硫化镉纳米晶的形成机理做了初步的研究.     

Large-scale synthesis of nearly monodisperse CdSe/CdS core/shell nanocrystals using air-stable reagents via successive ion layer adsorption and reaction

Successive ion layer adsorption and reaction (SILAR) originally developed for the deposition of thin films on solid substrates from solution baths is introduced as a technique for the growth of high-quality core/shell nanocrystals of compound semiconductors. The growth of the shell was designed to grow one monolayer at a time by alternating injections of air-stable and inexpensive cationic and anionic precursors into the reaction mixture with core nanocrystals. The principles of SILAR were demonstrated by the CdSe/CdS core/shell model system using its shell-thickness-dependent optical spectra as the probes with CdO and elemental S as the precursors. For this reaction system, a relatively high temperature, about 220-240 degrees C, was found to be essential for SILAR to fully occur. The synthesis can be readily performed on a multigram scale. The size distribution of the core/shell nanocrystals was maintained even after five monolayers of CdS shell (equivalent to about 10 times volume increase for a 3.5 nm CdSe nanocrystal) were grown onto the core nanocrystals. The epitaxial growth of the core/shell structures was verified by optical spectroscopy, TEM, XRD, and XPS. The photoluminescence quantum yield (PL QY) of the as-prepared CdSe/CdS core/shell nanocrystals ranged from 20% to 40%, and the PL full-width at half-maximum (fwhm) was maintained between 23 and 26 nm, even for those nanocrystals for which the UV-vis and PL peaks red-shifted by about 50 nm from that of the core nanocrystals. Several types of brightening phenomena were observed, some of which can further boost the PL QY of the core/shell nanocrystals. The CdSe/CdS core/shell nanocrystals were found to be superior in comparison to the highly luminescent CdSe plain core nanocrystals. The SILAR technique reported here can also be used for the growth of complex colloidal semiconductor nanostructures, such as quantum shells and colloidal quantum wells.     

八乙烯基多面体低聚倍半硅氧烷-N-异丙基丙烯酰胺共聚物有机-无机杂化水凝胶的合成与表征

以N-异丙基丙烯酰胺(NIPAM)和八乙烯基笼形低聚倍半硅氧烷(OVPOSS)为单体,通过溶液自由基共聚合成了一系列P(OVPOSS-co-NIPAM)有机-无机杂化水凝胶.采用傅立叶红外光谱(FTIR)、扫描电镜(SEM)、X-射线衍射(XRD)、示差扫描量热仪(DSC)、热重分析仪(TGA)和动态粘弹谱仪(DMA)对其结构与性能进行了研究.结果表明可以通过控制投料比来调节P(OVPOSS-co-NIPAM)杂化水凝胶中POSS的实际含量;P(OVPOSS-co-NIPAM)杂化水凝胶的微观形貌为孔洞结构,随POSS含量的增加,孔径逐渐减小;所合成的P(OVPOSS-co-NIPAM)杂化水凝胶均具有温敏性,随着POSS含量的增加,其最低临界溶解温度(LCST)由33.0℃降低至30.0℃,均低于常规水凝胶(33.7℃);POSS的引入使PNIPAM水凝胶的玻璃化转变温度(Tg)由142℃升至148℃,并改善了其热稳定性和力学强度.     

水热合成CdS纳米晶体的形貌控制研究

研究了水热合成CdS纳米晶体形貌的化学控制，选择不同的络合试剂为模板,研究其对水热合成CdS纳米晶体形貌的影响.实验发现若以络合试剂乙二胺、甲胺为模板时，产品CdS晶体的形貌分别为（20～30） nm×（200～600） nm和（40～50） nm×（200～600） nm尺寸的纳米棒;而以络合试剂吡啶、 氨为模板时，产品CdS晶体的形貌分别为平均尺寸约30 nm和20 nm的纳米颗粒.用XRD、TEM、XPS、PL和Raman光谱等技术对所得CdS纳米棒进行了表征.同时对水热合成CdS纳米晶体形貌的模板控制机制进行了探讨，提出了一种水热合成CdS纳米棒的络合物结构诱导生长机理.     

In situ adsorption method for synthesis of binary semiconductor CdS nanocrystals inside mesoporous SBA-15

Binary semiconductor CdS nanocrystals have been prepared inside the channels of mesoporous SBA-15 using an in situ adsorption method combining a surface modification scheme and a wet impregnation technique by functionalizing the SBA-15 surface with thiol groups, adsorbing cadmium cations, and calcining in N₂ atmosphere at 300 °C. The combined results of X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) firstly reveal that CdS nanocrystals with uniform size of about 6 nm are formed and mono-dispersed inside the channels of mesoporous SBA-15. And a blue shift is observed in UV–Vis absorption spectrum and photoluminescence (PL) spectrum, indicating the quantum size effect of nanocrystalline CdS.