Trends in the reactions of gaseous phenyl pnictogen radical cations C6H5EH2*+ (E = N, P, As)

In context of an analysis of the effect of the central atom E of gaseous radical cations of phenyl pnictogens C(6)H(5)EH(2), E = N (1), P (2), and As (3), the mass spectrometric reactions of phenyl phosphane 2 have been re-investigated by D-labeling and by using methods of tandem mass spectrometry. The 70 eV mass spectrum of 2 shows the base peak for ion [M-2H](*+) and significant peaks for ions [M-H](+), [M-(2C,3H)](+), [M-PH] (*+), and [M-(C,P,2H)](+). Metastable 2(*+) fragments exclusively by loss of H(2), and the investigation of deuterated 2-d(2) shows that excessive H/D migrations occur before fragmentation. Other significant fragment ions in the mass spectrum of 2 arise by losses of C(2)H(2,) P, or HCP from the ion [M-H](+). This mass spectrometric behavior puts the radical cation 2(*+) in between the fragmentation reactions of aniline radical cation 1(*+) (loss of H and subsequent losses of C(2)H(2,) or HCN) and phenyl arsane radical cation 3(*+) (elimination of H(2) and loss of As from ion [M-H](+)). The fragmentation mechanisms of the radical cations 1(*+) -3(*+) and of related ions were analyzed by calculations of the enthalpy of relevant species at the stationary points of the minimum enthalpy reaction pathways using the DFT hybrid functionals UBHLYP/6-311+G(2d,p)//UBHLYP/6-311+G(d). The results show that, in contrast to ionized aniline 1(*+), the reactions of the derivatives 2(*+) and 3(*+) of the heavier main group elements P and As are characterized by an easy elimination of H(2)via a reductive elimination of group C(6)H(5)-E (E = P, As) and by a special stability of bicyclic isomers of 2(*+) and 3(*+). Thus, while 1(*+) rearranges by ring expansion and formation an 7-aza-tropylium cation by loss of H., the increased stability of bicyclic intermediates in the rearrangement of 2(*+) and in particular of 3(*+) results in separate rearrangement pathways. The origin of these effects is the more extended and diffuse nature of the 3p and 4p AO of P and As.     

Cis-Trans Isomerization and Oxidation of Radical Cations of Stilbene Derivatives

Isomerization from cis stilbene derivatives (c-S (S = RCH=CHC(6)H(5): 1, R = C(6)H(5); 2, R = 4-CH(3)C(6)H(4); 3, R = 4-CH(3)OC(6)H(4) (= An); 4, R = 2,4-(CH(3)O)(2)C(6)H(3); 5, R = 3,4-(CH(3)O)(2)C(6)H(3); 6, R = 3,5-(CH(3)O)(2)C(6)H(3); 7, AnCH=C(CH(3))C(6)H(5); 8, AnCH=CHAn)) to trans isomers (t-S) and oxidation of S with O(2) were studied in gamma-ray radiolyses of c-S in Ar-saturated 1,2-dichloroethane (DCE) and of S in O(2)-saturated DCE, respectively. On the basis of product analyses, it is suggested that a smaller barrier to c-t unimolecular isomerization for c-3(*+)-5(*+) and 8(*+) than for c-1(*+), 2(*+), and 6(*+) due to the single bond character of the central C=C double bond for c-3(*+)-5(*+) and 8(*+) with a p-methoxyl group but not for c-1(*+), 2(*+), and 6(*+) without a p-methoxyl group because of the contribution of a quinoid-type structure induced by charge-spin separation. The isomerization proceeds via chain reaction mechanisms involving c-t unimolecular isomerization and endergonic hole transfer or dimerization and decomposition. The isomerization of c-3(*+) to t-3(*+) is catalyzed by addition of 1,4-dimethoxybenzene but terminated by triethylamine. The regioselective formation of 3d in oxidation of 3(*+) with O(2) is explained by spin localization on the beta-olefinic carbon in 3(*+). The results of product analyses are compared with the rate constants of the unimolecular isomerization and the oxidation for S(*+) measured with pulse radiolyses.     

Solvent and linker influences on AQ(*-)/dA(*+) charge-transfer state energetics and dynamics in anthraquinonyl-linker-deoxyadenosine conjugates

The goal of this work is to produce high yields of long-lived AQ(*-)/dA(*+) charge transfer (CT) excited states (or photoproducts). This goal fits within a larger context of trying generally to produce high yields of long-lived CT excited states within DNA nucleoside conjugates that can be incorporated into DNA duplexes. Depending upon the energetics of the anthraquinonyl (AQ) (3)(pi,pi) state as well as the reduction potentials of the subunits in particular anthraquinonyl-adenine conjugates, CT quenching of the AQ (3)(pi,pi*) state may or may not occur in polar organic solvents. In MeOH, bis(3',5'-O-acetyl)-N(6)-(anthraquinone-2-carbonyl)-2'-deoxyadenosine (AQCOdA) behaves as intended and forms a (3)(AQ(*-)/dA(*+)) CT state with a lifetime of 3 ns. However, in nonpolar THF the AQ(*-)/dA(*+) CT states of AQCOdA are too high in energy to be formed, and in DMSO a (1)(AQ(*-)/dA(*+)) CT state is formed but lives only 6 ps. Although the lowest energy excited state for AQCOdA in MeOH is a (3)(AQ(*-)/dA(*+)) CT state, for N(6)-(anthraquinone-2-methylenyl)-2'-deoxyadenosine (AQMedA) in the same solvent it is a (3)(pi,pi*) state. Changing the linking carbonyl in AQCOdA to methylene in AQMedA makes the anthraquinonyl subunit harder to reduce by 166 mV. This raises the energy of the (3)(AQ(*-)/dA(*+)) CT state above that of the (3)(pi,pi*) in AQMedA. The conclusion is that anthraquinonyl-dA conjugates will not have lowest energy AQ(*-)/dA(*+) CT states in polar organic solvents unless the anthraquinonyl subunit is also substituted with an electron-withdrawing group that raises the AQ-subunit's reduction potential above that of AQ. A key finding in this work is that the lifetime of the (3)(AQ(*-)/dA(*+)) CT excited state (ca. 3 ns) is ca. 500-times longer than that of the corresponding (1)(AQ(*-)/dA(*+)) CT excited state (ca. 6 ps).'     

Synthesis and structure of a series of new d(1)-Aryl imido-vanadium(IV) complexes stabilized by n-donor ligands

A family of new coordination vanadium(IV) compounds supported by a terminal or bridged aryl imido ligand are reported. Reaction of V(NMe(2))(4) with anilines ArNH(2), where Ar = 2,6-i-Pr(2)-C(6)H(3), 2,6-Me(2)-C(6)H(3), Ph, 2,6-Cl(2)-C(6)H(3), and C(6)F(5), afforded the diamagnetic imido-bridged complexes [V(NAr)(NMe(2))(2)](2) (1a-e). Chlorination of 1a-e with trimethylchlorosilane afforded complexes 2a-e formulated as [V(=NAr)Cl(2)(NHMe(2))(x)()](n)(). One-pot reaction of V(NMe(2))(4) with ArNH(2) in the presence of an excess of trimethylchlorosilane gave the five-coordinate compound [V(=NAr)Cl(2)(NHMe(2))(2)] (3a-e). Reaction of 3a-e with pyridine, bipyridine (bipy), or N,N,N',N'-tetramethylethylenediamine (tmeda) gave respectively the six-coordinate tris- or bis(pyridine) adducts [V(=NAr)Cl(2)(Py)(3)] (4a-e) or [V(=NAr)Cl(2)(Py)(2)(NHMe(2))] (5a), bipyridine complexes [V(=NAr)Cl(2)(bipy)(NHMe(2))] (5a-e) and [V(=NAr)Cl(2)(bipy)(Py)] (9a), and tmeda adduct [V(=NAr)Cl(2)(tmeda)(NHMe(2))] (10a). Moreover, five-coordinate complexes free of NHMe(2) ligands, such as [V(=NAr)Cl(2)(Py)(2)] (5a), [V(=NAr)Cl(2)(bipy)] (8a), and [V(=NAr)Cl(2)(tmeda)] (11a), were directly prepared starting from precursors 2a-e. All compounds were totally characterized by spectroscopic methods (IR, (1)H NMR for diamagnetic complexes, and EPR for paramagnetic complexes), elemental analysis, magnetism, and single-crystal X-ray diffraction studies for 1b, 3a, 3d, 4b, 4d, 7c, 10a, and 11a.     

Syntheses and reactions of hexavalent organotellurium compounds bearing five or six tellurium-carbon bonds

A variety of hexaorganotellurium compounds, Ar(6-n)(CH3)nTe [Ar=4-CF3C6H4, n=0 (1a), n=1 (3a), n=2 (trans-4a and cis-4a), n=3 (mer-5a), n=4 (trans-6a); Ph, n=0 (1b), n=1 (3b), n=2 (trans-4b); 4-CH3C6H4, n=0 (1c), n=1 (3c), n=2 (trans-4c), n=4 (trans-6c); 4-BrC6H4, n=0 (1d)] and Ar5(R)Te [Ar=4-CF3C6H4, R=4-CH3OC6H4 (8); Ar=4-CF3C6H4, R=vinyl (9), Ar=Ph, R=vinyl (10), Ar=4-CF3C6H4, R=PhSCH2 (11), Ar=Ph, R=PhSCH2 (12), Ar=4-CF3C6H4, R=nBu (13)] and pentaorganotellurium halides, Ar5TeX [Ar=4-CF3C6H4, X=Cl (2a-Cl), X=Br (2a-Br); Ar=Ph, X=Cl (2b-Cl), X=Br (2b-Br); Ar=4-CH3C6H4, X=Cl (2c-Cl), X=Br (2c-Br); Ar=4-BrC6H4, X=Br (2d-Br)] and (4-CF3C6H4)4(CH3)TeX [X=Cl (trans-7a-Cl) and X=Br (trans-7a-Br)] were synthesized by the following methods: 1) one-pot synthesis of 1 a, 2) the reaction of SO2Cl2 or Br2 with Ar5Te(-)Li+ generated from TeCl4 or TeBr4 with five equivalents of ArLi, 3) reductive cleavage of Ar(6-m)(CH3)(m)Te (m=0 or 2) with KC8 followed by treatment with CH3I, 4) valence expansion reaction from low-valent tellurium compounds by treatment with KC8 followed by reaction with CH3I, 5) nucleophilic substitution of Ar(6-y-z)(CH3)zTeX(y-z) (X=Cl, Br, OTf; z=0, 1; y=1, 2) with organolithium reagents. The scope and limitations and some details for each method are discussed and electrophilic halogenation of the hexaorganotellurium compounds is also described.     

Stereochemical memory versus Curtin-Hammett behavior in the rearrangement of 1,3-cyclopentanediyl radical cations derived from housanes through structural effects on conformational control

The electron-transfer-catalyzed rearrangement of the housanes 1 affords regioselectively the two cyclopentenes 2 and 3 by 1,2-migration of a group at the methano bridge. Appropriate ring annelation in the intermediary cyclopentane-1,3-diyl radical cation 1(*+) changes the stereochemical course of the rearrangement from complete stereoselectivity (stereochemical memory) for the structurally simple housane 1b to partial loss of stereoselectivity through competing conformational interconversion for the tricyclic housane 1c. Additional cyclohexane annelation, as in the tetracyclic housane 1a, results in complete loss of stereocontrol through Curtin-Hammett behavior, as substantiated by the viscosity dependence on the product ratio of the rearrangement. Whereas in the radical cations 1b(*+) and 1c(*+) the 1,2-shifts (k(2) and k(3)) are faster than the conformational anti <==> syn change (k(1), k(-1)), the reverse applies for the radical cation 1a(*+). Such structural manipulation of conformational effects in radical cation rearrangements has hitherto not been documented.     

Water-catalyzed hydrolysis of the radical cation of ketene in the gas phase: theory and experiment

Both theoretical and experimental investigations are reported for the gas-phase hydrolysis of the radical cation of ketene, H(2)CCO(*+). Density functional theory (DFT) with the B3LYP/6-311++G(d,p) method indicates that a second water molecule is required as a catalyst for the addition of water across the C=O bond in H(2)CCO(*+) by eliminating the activation barrier for the conversion of [H(2)CCO.H(2)O](*+) to [H(2)CC(OH)(2)](*+). Theory further indicates that [H(2)CC(OH)(2).H(2)O](*+) may recombine with electrons to produce neutral acetic acid. Experimental results of flow-reactor tandem mass spectrometer experiments in which CH(2)CO(*+) ions were produced either directly from ketene by electron transfer or by the chemical reaction of CH(2)(*+) with CO are consistent with formation of an (C(2),H(4),O(2))(*+) ion in a reaction second-order in H(2)O. Furthermore, comparative multi-CID experiments indicate that this ion is likely to be the enolic CH(2)C(OH)(2)(*+) cation. The results suggest a possible mechanism for the formation of acetic acid from ketene and water on icy surfaces in hot cores and interstellar clouds.     

Cyclopropenylidene carbene ligands in palladium catalysed coupling reactions: carbene ligand rotation and application to the Stille reaction

Reaction of [Pd(PPh(3))(4)] with 1,1-dichloro-2,3-diarylcyclopropenes gives complexes of the type cis-[PdCl(2)(PPh(3))(C(3)(Ar)(2))] (Ar = Ph 5, Mes 6). Reaction of [Pd(dba)(2)] with 1,1-dichloro-2,3-diarylcyclopropenes in benzene gave the corresponding binuclear palladium complexes trans-[PdCl(2)(C(3)(Ar)(2))](2) (Ar = Ph 7, p-(OMe)C(6)H(4)8, p-(F)C(6)H(4)9). Alternatively, when the reactions were performed in acetonitrile, the complexes trans-[PdCl(2)(NCMe)(C(3)(Ar)(2))] (Ar = Ph 10, p-(OMe)C(6)H(4)11 and p-(F)C(6)H(4)) 12) were isolated. Addition of phosphine ligands to the binuclear palladium complex 7 or acetonitrile adducts 11 and 12 gave complexes of the type cis-[PdCl(2)(PR(3))(C(3)(Ar)(2))] (Ar = Ph, R = Cy 13, Ar = p-(OMe)C(6)H(4), R = Ph 14, Ar = p-(F)C(6)H(4), R = Ph 15). Crystal structures of complexes 6·3.25CHCl(3), 10, 11·H(2)O and 12-15 are reported. DFT calculations of complexes 10-12 indicate the barrier to rotation about the carbene-palladium bond is very low, suggesting limited double bond character in these species. Complexes 5-9 were tested for catalytic activity in C-C coupling (Mizoroki-Heck, Suzuki-Miyaura and, for the first time, Stille reactions) and C-N coupling (Buchwald-Hartwig amination) showing excellent conversion with moderate to high selectivity.     

Two-coordinate, quasi-two-coordinate, and distorted three coordinate, T-shaped chromium(II) amido complexes: unusual effects of coordination geometry on the lowering of ground state magnetic moments

The synthesis and characterization of the mononuclear chromium(II) terphenyl substituted primary amido-complexes Cr{N(H)Ar(Pr(i)(6))}(2) (Ar(Pr(i)(6)) = C(6)H(3)-2,6-(C(6)H(2)-2,4,6-(i)Pr(3))(2) (1), Cr{N(H)Ar(Pr(i)(4))}(2) (Ar(Pr(i)(4)) = C(6)H(3)-2,6-(C(6)H(3)-2,6-(i)Pr(2))(2) (2), Cr{N(H)Ar(Me(6))}(2) (Ar(Me(6)) = C(6)H(3)-2,6-(C(6)H(2)-2,4,6-Me(3))(2) (4), and the Lewis base adduct Cr{N(H)Ar(Me(6))}(2)(THF) (3) are described. Reaction of the terphenyl primary amido lithium derivatives Li{N(H)Ar(Pr(i)(6))} and Li{N(H)Ar(Pr(i)(4))} with CrCl(2)(THF)(2) in a 2:1 ratio afforded complexes 1 and 2, which are extremely rare examples of two coordinate chromium and the first stable chromium amides to have linear coordinated high-spin Cr(2+). The reaction of the less crowded terphenyl primary amido lithium salt Li{N(H)Ar(Me(6))} with CrCl(2)(THF)(2) gave the tetrahydrofuran (THF) complex 3, which has a distorted T-shaped metal coordination. Desolvation of 3 at about 70 °C gave 4 which has a formally two-coordinate chromous ion with a very strongly bent core geometry (N-Cr-N= 121.49(13)°) with secondary Cr--C(aryl ring) interactions of 2.338(4) ? to the ligand. Magnetometry studies showed that the two linear chromium species 1 and 2 have ambient temperature magnetic moments of about 4.20 μ(B) and 4.33 μ(B) which are lower than the spin-only value of 4.90 μ(B) typically observed for six coordinate Cr(2+). The bent complex 4 has a similar room temperature magnetic moment of about 4.36 μ(B). These studies suggest that the two-coordinate chromium complexes have significant spin-orbit coupling effects which lead to moments lower than the spin only value of 4.90 μ(B) because λ (the spin orbit coupling parameter) is positive. The three-coordinated complex 3 had a magnetic moment of 3.79 μ(B).     

Synthesis, structures, and olefin polymerization capability of vanadium(4+) imido compounds with fac-N3 donor ligands

One-pot reactions of V(NMe2)4 with a range of primary alkyl- and arylamines RNH2 and Me3SiCl afforded the corresponding five-coordinate vanadium(4+) imido compounds V(NR)Cl2(NHMe2)2 [R = 2,6-C6H3(i)Pr2 (1a, previously reported), 2-C6H4(t)Bu (1b), 2-C6H4CF3 (1c), (t)Bu (1d), Ad (Ad = adamantyl, 1e)]. The crystal structures of 1b (two diamorphic forms) and 1c featured N-H...Cl hydrogen-bonded chains. Reaction of 1a-e with the neutral face-capping, N3 donor ligands TACN (TACN = 1,4,7-trimethyltriazacyclononane) or TPM [TPM = tris(3,5-dimethylpyrazolyl)methane] gave the corresponding six-coordinate complexes V(NR)(TACN)Cl2 (2a-e) and V(NR)(TPM)Cl2 (3a-e). The X-ray structures of 2b, 2c, 2d, 3b, 3c, and 3e were determined. When activated with methylaluminoxane, certain of the complexes V(NR)(TPM)Cl2 (3) formed moderately active ethylene polymerization catalysts, whereas none of the compounds V(NR)(TACN)Cl2 (2) were active.     

Activation of carbodiimide and transformation with amine to guanidinate group by Ln(OAr)3(THF)2 (Ln: lanthanide and yttrium) and Ln(OAr)3(THF)2 as a novel precatalyst for addition of amines to carbodiimides: influence of aryloxide group

Reaction of Ln(OAr(1))(3)(THF)(2) (Ar(1)= [2,6-((t)Bu)(2)-4-MeC(6)H(2)] with carbodiimides (RNCNR) in toluene afforded the RNCNR coordinated complexes (Ar(1)O)(3)Ln(NCNR) (R = (i)Pr (isopropyl), Ln = Y (1) and Yb (2); R = Cy (cyclohexyl), Ln = Y (3)) in high yields. Treatment of 1 and 2 with 4-chloroaniline, respectively, at a molar ratio of 1:1 yielded the corresponding monoguanidinate complex (Ar(1)O)(2)Y[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (4) and (Ar(1)O)(2)Yb[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (5). Complexes 4 and 5 can be prepared by the reaction of Ln(OAr(1))(3)(THF)(2) with RNCNR and amine in toluene at a 1:1:1 molar ratio in high yield directly. A remarkable influence of the aryloxide ligand on this transformation was observed. The similar transformation using the less bulky yttrium complexes Y(OAr(2))(3)(THF)(2) (Ar(2) = [2,6-((i)Pr)(2)C(6)H(3)]) or Y(OAr(3))(3)(THF)(2) (Ar(3) = [2,6-Me(2)C(6)H(3)]) did not occur. Complexes Ln(OAr(1))(3)(THF)(2) were found to be the novel precatalysts for addition of RNCNR with amines, which represents the first example of catalytic guanylation by the lanthanide complexes with the Ln-O active group. The catalytic activity of Y(OAr(1))(3)(THF)(2) was found to be the same as that of monoguanidinate complex 4, indicating 4 is one of the active intermediates in the present process. The other intermediate, amide complex (Ar(1)O)(2)Ln[(2-OCH(3)-C(6)H(4)NH)(2-OCH(3)-C(6)H(4)NH(2))] (6), was isolated by protonolysis of 4 with 2-OCH(3)-C(6)H(4)NH(2). All the complexes were structurally characterized by X-ray single crystal determination.     

beta-Diiminato ligand (L) transformations in reactions of KL with PI3 and I2 [L = {N(C6H3Pr(i)2-2,6)C(H)}2CPh

The reaction of the potassium beta-diiminate KL (L = [{N(Ar)C(H)}(2)CPh](-); Ar = C(6)H(3)Pr(i)(2)-2,6) with PI(3) unexpectedly produced a phosphenium salt of the intermolecularly C,C-coupled ligand [P(I){N(Ar)CH}(2)C(C(6)H(4)-4)C(Ph)(CH[double bond, length as m-dash]NAr)(2)](+)[I(3)](-), while an intramolecularly N,N-coupled salt [N[upper bond 1 start](Ar)C(H)C(Ph)C(H)N[upper bond 1 end](Ar)](+)[I(5)](-) was isolated from KL + I(2).     

Unexpectedly efficient activation of push-pull nitriles by a Pt(II) center toward dipolar cycloaddition of Z-nitrones

Pt(II)-coordinated NCNR'(2) species are so highly activated towards 1,3-dipolar cycloaddition (DCA) that they react smoothly with the acyclic nitrones ArCH=N(+)(O(-))R' (Ar/R' = C(6)H(4)Me-p/Me; C(6)H(4)OMe-p/CH(2)Ph) in the Z-form. Competitive reactivity study of DCA between trans-[PtCl(2)(NCR)(2)] (R = Ph and NR'(2)) species and the acyclic nitrone 4-MeC(6)H(4)CH=N(+)(O(-))Me demonstrates comparable reactivity of the coordinated NCPh and NCNR'(2), while alkylnitrile ligands do not react with the dipole. The reaction between trans-[PtCl(2)(NCNR'(2))(2)] (R'(2) = Me(2), Et(2), C(5)H(10)) and the nitrones proceed as consecutive two-step intermolecular cycloaddition to give mono-(1a-d) and bis-2,3-dihydro-1,2,4-oxadiazole (2a-d) complexes (Ar/R' = p-tol/Me: R'(2) = Me(2)a, R'(2) = Et(2)b, R'(2) = C(5)H(10)c; Ar/R' = p-MeOC(6)H(4)/CH(2)Ph: R'(2) = Me(2)d). All complexes were characterized by elemental analyses (C, H, N), high resolution ESI-MS, IR, (1)H and (13)C{(1)H} NMR spectroscopy. The structures of trans-1b, trans-2a, trans-2c, and trans-2d were determined by single-crystal X-ray diffraction. Metal-free 5-NR'(2)-2,3-dihydro-1,2,4-oxadiazoles 3a-3d were liberated from the corresponding (dihydrooxadiazole)(2)Pt(II) complexes by treatment with excess NaCN and the heterocycles were characterized by high resolution ESI(+)-MS, (1)H and (13)C{(1)H} spectroscopy.     

Remarkable reactions of cyclooctatetraene diiron-bridging carbyne complexes with amino and amido compounds: nucleophilic addition to and breaking of the cyclooctatetraene ring

The reactions of the cationic, diiron-bridging carbyne complexes [Fe(2)(mu-CAr)(CO)(4)(eta(8)-C(8)H(8))]BF(4) (1, Ar=C(6)H(5); 2, Ar=p-CH(3)C(6)H(4); 3, Ar=p-CF(3)C(6)H(4)) with LiN(C(6)H(5))(2) in THF at low temperature gave novel N-nucleophilic-addition products, namely, the neutral, diiron-bridging carbyne complexes [Fe(2)(mu-CAr)(CO)(4)(eta(7)-C(8)H(8)N(C(6)H(5))(2))] (4, Ar=C(6)H(5); 5, Ar=p-CH(3)C(6)H(4); 6, Ar=p-CF(3)C(6)H(4))). Cationic bridging carbyne complexes 1-3 react with (C(2)H(5))(2)NH, (iC(3)H(7))(2)NH, and (C(6)H(11))(2)NH under the same conditions with ring cleavage of the COT ligand to produce the novel diiron-bridging carbene inner salts [Fe(2)[mu-C(Ar)C(8)H(8)NR(2)](CO)(4)] (7, Ar=C(6)H(5), R=C(2)H(5); 8, Ar=p-CH(3)C(6)H(4), R=C(2)H(5); 9, Ar=p-CF(3)C(6)H(4), R=C(2)H(5); 10, Ar=C(6)H(5), R=iC(3)H(7); 11, Ar=p-CH(3)C(6)H(4), R=iC(3)H(7); 12, Ar=p-CF(3)C(6)H(4), R=iC(3)H(7); 13, Ar=C(6)H(5), R=C(6)H(11); 14, Ar=p-CH(3)C(6)H(4), R=C(6)H(11), 15, Ar=p-CF(3)C(6)H(4), R=C(6)H(11)). Piperidine reacts similarly with cationic carbyne complex 3 to afford the corresponding bridging carbene inner salt [Fe(2)[mu-C(Ar)C(8)H(8)N(CH(2))(5)](CO)(4)] (16). Compound 9 was transformed into a new diiron-bridging carbene inner salt 17, the trans isomer of 9, by heating in benzene. Unexpectedly, the reaction of C(6)H(5)NH(2) with 2 gave a novel COT iron-carbene complex [Fe(2)[=C(C(6)H(4)CH(3)-p)NHC(6)H(5)](mu-CO)(CO)(3)(eta(8)-C(8)H(8))] (18). However, the analogous reactions of 2-naphthylamine with 2 and of p-CF(3)C(6)H(4)NH(2) with 3 produce novel chelated iron-carbene complexes [Fe(2)[=C(C(6)H(4)CH(3)-p)NC(10)H(7)](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (19) and [Fe(2)[=C(C(6)H(4)CF(3)-p)NC(6)H(4)CF(3)-p](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (20), respectively. Compound 18 can also be transformed into the analogous chelated iron-carbene complex [Fe(2)[=C(C(6)H(4)CH(3)-p)NC(6)H(5)](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (21). The structures of complexes 6, 9, 15, 17, 18, and 21 have been established by X-ray diffraction studies.     

Rh(I) coordination chemistry of chiral alpha-aminophosphine(eta6-arene)chromium tricarbonyl ligands

The diastereoselective addition of Ph(2)PH to the chiral ortho-substituted eta(6)-benzaldimine complexes (eta(6)-o-X-C(6)H(4)CH=NAr)Cr(CO)(3) (1, X = MeO, Ar = p-C(6)H(4)OMe; 2, X = Cl, Ar = Ph) leads to the formation of the corresponding chiral aminophosphines (alpha-P,N) Ph(2)P-CH(Ar(1))-NHAr(2) (3, Ar(1) = o-C(6)H(4)(OCH(3))[Cr(CO)(3)], Ar(2) = p-C(6)H(4)OCH(3); 4, Ar(1) = o-C(6)H(4)Cl[Cr(CO)(3)], Ar(2) = Ph) in equilibrium with the starting materials. The uncomplexed benzaldimine (o-ClC(6)H(4)CH=NPh), 2', analogously produces an equilibrium amount of the corresponding aminophosphine Ph(2)P-CH(Ar(1))-NHAr(2) (4', Ar(1) = o-C(6)H(4)Cl, Ar(2) = Ph). Depending on the equilibrium constant, the subsequent addition of (1)/(2) equiv of [RhCl(COD)](2) (COD = 1,5-cyclooctadiene) leads to either Ph(2)PH oxidative addition in the case of 3 or to the corresponding [RhCl(COD)(alpha-P,N)] complexes [RhCl(COD)(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)] (5) and [RhCl(COD)(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)] (5') in the cases of the aminophosphines 4 and 4'. The addition of the latter ligands, as racemic mixtures, to (1)/(4) equiv of [Rh(CO)(2)Cl](2) leads to the [RhCl(CO)(alpha-P,N)(2)] complexes [RhCO(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)(2)Cl] (7) or [RhCO(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)(2)Cl] (7') as mixtures of (R(C),S(C))/(S(C),R(C)) and (R(C),R(C))/(S(C),S(C)) diastereomers. The rhodium complexes 5 and 7' have been fully characterized by IR and (31)P NMR spectroscopies and X-ray crystallography. These compounds exhibit intramolecular Rh-Cl.H-N interactions in the solid state and in solution. The stability of the new rhodium complexes has been studied under different CO pressures. Under 1 atm of CO, 5 is converted to an unstable complex [RhCl(CO)(2)(alpha-P,N)], 6, which undergoes ligand redistribution leading to 7 plus an unidentified complex. This reaction is inhibited under higher CO or syngas pressure, as confirmed by the observation of the same catalytic activity in hydroformylation when styrene was added to a catalytic mixture that was either freshly prepared or left standing for 20 h under high CO pressure.     

Synthesis of vanadium(III) complexes bearing iminopyrrolyl ligands and their role as thermal robust ethylene (co)polymerization catalysts

Bis(imino)pyrrolyl vanadium(III) complexes 2a-e [2,5-C(4)H(2)N(CH=NR)(2)]VCl(2)(THF)(2) [R = C(6)H(5) (2a), 2,6-Me(2)C(6)H(3) (2b), 2,6-(i)Pr(2)C(6)H(3) (2c), 2,4,6-Me(3)C(6)H(2) (2d), C(6)F(5) (2e)] and bis(iminopyrrolyl) vanadium(III) complex 4f [C(4)H(3)N(CH=N-2,6-(i)PrC(6)H(3))](2)VCl(THF) have been prepared in good yields from VCl(3)(THF)(3) by treating with 1.0 and 2.0 equivalent deprotonated ligands in tetrahydrofuran (THF), respectively. These complexes were characterized by FTIR and mass spectra as well as elemental analysis. Structures of 2c and 4f were further confirmed by X-ray crystallographic analysis. DFT calculations indicated the configurations of 2a-e with two nitrogen atoms of the chelating ligand coordinating with vanadium metal centre were more stable in energy. These complexes were employed as catalysts for ethylene polymerization at various reaction conditions. On activation with Et(2)AlCl, these complexes exhibited high catalytic activities (up to 22.2 kg mmol(-1)(V) h(-1) bar(-1)) even at high temperature, suggesting these catalysts possessed remarkable thermal stability. Moreover, high molecular weight polymer with unimodal molecular weight distributions can be obtained, indicating the polymerization took place in a single-site nature. The copolymerizations of ethylene and 1-hexene with precatalysts 2a-e and 4f were also explored in the presence of Et(2)AlCl. Catalytic activity, comonomer incorporation, and properties of the resultant polymers can be controlled over a wide range by tuning catalyst structures and reaction parameters.     

Chromium complexes supported by phenanthrene-imine derivative ligands: synthesis, characterization and catalysis on isoprene cis-1,4 polymerization

Reactions of CrCl(2)(THF)(2) with N-aryl-9,10-iminophenanthraquinone in CH(2)Cl(2) give the monoimine chromium complexes (Ar)IPQCrCl(2)(THF)(2) (1, Ar = 2,6-Me(2)C(6)H(3); 2, Ar = 2,6-Et(2)C(6)H(3); 3, Ar = 2,6-(i)Pr(2)C(6)H(3)). Molecular structures of 1 and 3 were revealed to be monomeric with the chromium atoms in distorted octahedral geometries. Similar reactions of CrCl(2)(THF)(2) with N,N-bis(arylimino)phenanthrene ligands afford the diimine complexes (Ar1,Ar2)BIPCrCl(μ-Cl)(3)Cr(THF)(Ar1,Ar2)BIP (4, Ar(1) = Ar(2) = 2,6-Me(2)C(6)H(3); 5, Ar(1) = Ar(2) = 2,6-Et(2)C(6)H(3); 6, Ar(1) = Ar(2) = 2,6-(i)Pr(2)C(6)H(3); 7, Ar(1) = 2,6-Me(2)C(6)H(3), Ar(2) = 2,6-(i)Pr(2)C(6)H(3)). The X-ray diffraction analysis shows that 4, 5, and 7 are chlorine-bridged dimers with each chromium atom in a distorted octahedral geometry. Upon activation with MAO, all these complexes exhibit good catalytic activities for isoprene polymerization affording polyisoprene with predominantly a cis-1,4 unit.     

Synthesis, structure, and electrochemical studies of molybdenum and tungsten dinitrogen, diazenido, and hydrazido complexes that contain aryl-substituted triamidoamine ligands

One-electron reduction of [ArN(3)N]MoCl complexes (Ar = C(6)H(5), 4-FC(6)H(4), 4-t-BuC(6)H(4), 3,5-Me(2)C(6)H(3)) yields complexes of the type [ArN(3)N]Mo-N=N-Mo[ArN(3)N], while two-electron reduction yields ([ArN(3)N]Mo-N=N)(-) derivatives (Ar = C(6)H(5), 4-FC(6)H(4), 4-t-BuC(6)H(4), 3,5-Me(2)C(6)H(3), 3,5-Ph(2)C(6)H(3), and 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3)). Compounds that were crystallographically characterized include ([t-BuC(6)H(4)N(3)N]Mo)(2)(N(2)), Na(THF)(6)([PhN(3)N]Mo-N=N)(2)Na(THF)(3), [t-BuC(6)H(4)N(3)N]Mo-N=N-Na(15-crown-5), and ([Ph(2)C(6)H(3)N(3)N]MoNN)(2)Mg(DME)(2). Compounds of the type [ArN(3)N]Mo-N=N-Mo[ArN(3)N] do not appear to form when Ar = 3,5-Ph(2)C(6)H(3) or 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3), presumably for steric reasons. Treatment of diazenido complexes (e.g., [ArN(3)N]Mo-N=N-Na(THF)(x)) with electrophiles such as Me(3)SiCl or MeOTf yielded [ArN(3)N]Mo-N=NR complexes (R = SiMe(3) or Me). These species react further to yield ([ArN(3)N]Mo-N=NMe(2))(+) species in the presence of methylating agents. Addition of anionic methyl reagents to ([ArN(3)N]Mo-N=NMe(2))(+) species yielded [ArN(3)N]Mo(N=NMe(2))(Me) complexes. Reduction of [4-t-BuC(6)H(4)N(3)N]WCl under dinitrogen leads to a rare ([t-BuC(6)H(4)N(3)N]W)(2)(N(2)) species that can be oxidized by two electrons to give a stable dication (as its BPh(4)(-) salt). Reduction of hydrazido species leads to formation of Mo=N in low yields, and only dimethylamine could be identified among the many products. Electrochemical studies revealed expected trends in oxidation and reduction potentials, but also provided evidence for stable neutral dinitrogen complexes of the type [ArN(3)N]Mo(N(2)) when Ar is a relatively bulky terphenyl substituent.     

Synthesis and characterization of three-coordinate and related beta-diketiminate derivatives of manganese,iron, and cobalt

Treatment of M[N(SiMe(3))(2)](2) (M = Mn, Fe, Co) with various bulky beta-diketimines afforded a variety of new three-coordinate complexes which were characterized by UV-vis, (1)H NMR and IR spectroscopy, magnetic measurements, and X-ray crystallography. Reaction of the beta-diketimine H(Dipp)NC(Me)CHC(Me)N(Dipp) (Dipp(2)N(wedge)NH; Dipp = C(6)H(3)-2,6-Pr(i)(2)) with M[N(SiMe(3))(2)](2) (M = Mn or Co) gave Dipp(2)N(wedge)NMN(SiMe(3))(2) (M = Mn, 1; Co, 3) while the reaction of Fe[N(SiMe(3))(2)](2) with Ar(2)N(wedge)NH (Ar = Dipp, C(6)F(5), Mes, C(6)H(3)-2,6-Me(2), or C(6)H(3)-2,6-Cl(2)) afforded the series of iron complexes Ar(2)N(wedge)NFe[N(SiMe(3))(2)] (Ar = Dipp, 2a; C(6)F(5), 2b; Mes, 2c; C(6)H(3)-2,6-Me(2), 2d; C(6)H(3)-2,6-Cl(2), 2e). This represents a new synthetic route to beta-diketiminate complexes of these metals. The four-coordinate bis-beta-diketiminate complex Fe[N(wedge)N(C(6)F(5))(2)](2), 4, was also isolated as a byproduct from the synthesis of 2b. Direct reaction of the Dipp(2)N(wedge)NLi with CoCl(2) gave the "ate" salt Dipp(2)N(wedge)NCoCl(2)Li(THF)(2), 5, in which the lithium chloride has formed a complex with Dipp(2)N(wedge)NCoCl through chloride bridging. The Fe(III) species Dipp(2)N(wedge)NFeCl(2), 6, was obtained cleanly from the reaction of FeCl(3) with Dipp(2)N(wedge)NLi. Magnetic measurements showed that all the complexes have a high spin configuration. The different substituents in the series of iron complexes 2a-e allowed assignment of their paramagnetically shifted (1)H NMR spectra. The X-ray crystal structures 1-2d and 3 showed that they have a distorted three-coordinate planar configuration at the metals whereas complexes 4-6 have highly distorted four-coordinate geometries.     

Coupling of CpCr(CO)3 and heterocyclic dithiadiazolyl radicals. synthetic, x-ray diffraction, dynamic NMR, EPR, CV, and DFT studies

The reaction of the 1,2,3,5-dithiadiazolyls (4-R-C(6)H(4)CN(2)S(2))(2) (R = Me, 2a; Cl, 2b; OMe, 2c; and CF3, 2d) and (3-NC-5-tBu-C(6)H(3)CN(2)S(2))(2) (2e) with [CpCr(CO)(3)](2) (Cp = eta(5)-C(5)H(5)) (1) at ambient temperature respectively yielded the complexes CpCr(CO)(2)(eta(2)-S(2)N(2)CC(6)H(4)R) (R = 4-Me, 3a; 4-Cl, 3b; 4-OMe, 3c; and 4-CF(3), 3d) and CpCr(CO)(2)(eta(2)-S(2)N(2)CC(6)H(3)-3-(CN)-5-(tBu)) (3e) in 35-72% yields. The complexes 3c and 3d were also synthesized via a salt metathesis method from the reaction of NaCpCr(CO)(3) (1B) and the 1,2,3,5-dithiadiazolium chlorides 4-R-C(60H(4)CN(2)S(2)Cl (R = OMe, 8c; CF(3), 8d) with much lower yields of 6 and 20%, respectively. The complexes were characterized spectroscopically and also by single-crystal X-ray diffraction analysis. Cyclic voltammetry experiments were conducted on 3a-e, EPR spectra were obtained of one-electron-reduced forms of 3a-e, and variable temperature 1H NMR studies were carried out on complex 3d. Hybrid DFT calculations were performed on the model system [CpCr(CO)(2)S(2)N(2)CH] and comparisons are made with the reported CpCr(CO)(2)(pi-allyl) complexes.