Plasma-Induced Synthesis of Organic Compounds From Graphite and Aqueous Solution

Discharge experiments were performed to explore the synthesis between graphite and aqueous solution. It was found that atomic carbon was transferred from anode into the solution by arc-discharge experiments and various kinds of organic compounds were generated by synthetic reactions from graphite and water or ammonia water. Carboxylic acids and amino acids were identified in the products by GC-MS and HPLC analyses. It is well known that graphite can hardly combine with other substances under common conditions. So the reaction not only provided an interesting attempt for the chemical transformation from graphite to organic compounds but also served as a useful reference for the formation of organic compounds from atomic carbon under primitive earth conditions.     

Curved graphite and its mathematical transformations

Mathematical transformations for graphite with positive, negative and zero Gaussian curvatures are presented. When the Gaussian curvatureK is zero, we analyse a bending transformation from a planar sheet into a cone. The Bonnet, the Goursat and a mixed transformation are studied for graphitic structures with the same topologies as triply periodic minimal surfaces (K < 0). We have found that using the Kenmotsu equations for surfaces of constant mean curvature it is possible to invert spherical and cylindrical graphite. A bending transformation for surfaces of revolution is also studied; during this transformation the helical arrangement of cylinders changes. All these transformations can give an insight into kinematic processes of curved graphite and into new shapes.     

从碳到氮——以“金课”标准在碳基材料转化设计中提升学生创新思维培养

Carbon has always been an essential content in the teaching of inorganic chemistry. In light of the gold standard proposed by the Ministry of Education for the 'Gold Classes', through teaching of the transformation design of carbon-based materials, the paper gradually introduces the novel photocatalyst graphite carbon nitride from graphite and graphene, and analyzes its properties. This approach can improve students' understanding of graphite and nitrogen carbide, and play a role in cultivating students' innovative thinking.     

The thermodynamics of the transformation of graphite to multiwalled carbon nanotubes

The thermodynamic quantities associated to the transformation from graphite to multiwalled carbon nanotubes (MWCNTs) were determined by electromotive force (emf) and differential scanning calorimetry (DSC) measurements. From the emf versus T data of galvanic cell Mo|Cr(3)C(2), CrF2, MWCNTs|CaF2 s.c.|Cr(3)C(2), CrF2, graphite|Mo with CaF2 as solid electrolyte, Delta(r)H(T) degrees= 8.25 +/- 0.09 kJ mol(-1) and Delta(r)S(T) degrees= 11.72 +/- 0.09 JK(-1) mol(-1) were found at average temperature T = 874 K. The transformation enthalpy was also measured by DSC of the Mn(7)C(3) formation starting from graphite or MWCNTs. Thermodynamic values at 298 K were calculated to be: Delta(r)H(298) degrees = 9.0 +/- 0.8 kJ mol(-1) as averaged value from both techniques and Delta(r)S(298) degrees approximately Delta(r)S(T) degrees. At absolute zero, the residual entropy of MWCNTs was estimated 11.63 +/- 0.09 JK(-1) mol(-1), and transformation enthalpy Delta(r)H(0) degrees approximately Delta(r)H(298) degrees. The latter agrees satisfactorily with the theoretical calculations for the graphite-MWCNTs transformation. On thermodynamic basis, the transformation becomes spontaneous above 704 +/- 13 K.     

Specifics of the thermal transformations of the wurtzite phase of boron nitride

The kinetics of the transformation of the BN wurtzite phase to the graphite modification was studied at normal pressure and 600–970°C. At these temperatures and certain thermal treatment durations, along with the formation of the graphite phase, the reverse transition from g-BN to w-BN occurs, a behavior indicative of a higher thermodynamics stability of the wurtzite phase.     

一种新的测定微粒的电化学技术

设计了一种由2个石墨电极短路相连组成工作电极的新的电化学池装置.操作时首先通过外力按压使极少量固体微粒粘附在其中一个石墨电极表面上,然后在溶液存在下将微粒夹紧并固定在2个石墨电极表面之间进行电化学测定.电化学转化过程中生成的可溶性物质被封闭在2个石墨电极表面之间而得到测定.用该技术对钯沉积在氧化铝上而组成的催化剂的电化学行为以及黄铁矿的电化学行为进行了研究.结果表明,其兼具可电解粘合剂碳糊电极和固体微粒伏安法(voltammetry of microparticles)技术的优点而避免了各自的缺点:即不使用粘合剂,从而消除了粘合剂中杂质产生的氧化或还原电流的影响;可测定电化学转化过程中生成的可溶性物质;分辨率好、易于操作.     

Theoretical model and experimental study of pore growth during thermal expansion of graphite intercalation compounds

Summary A new technique, which allows one to simultaneously follow the mass and volume of graphite intercalation compounds (GICs) during thermal transformation into expanded graphite, was developed. This enabled us to elucidate the mechanism for the thermal expansion of GICs and formulate a quantitative model for the process. Effective activation parameters of the thermal decomposition of new GICs were obtained by using non-isothermal kinetics procedure. Thermal decomposition was described as a break of intermolecular bonds followed by diffusion.     

石墨炉内石墨探针表面原子化机理的研究：Ⅳ.硝酸铕的原子化机理

用Ｘ－射线衍射分析与Ｘ－射线光电子能谱分析研究了硝酸铕在石墨炉内石墨探针表面原子化机理。研究结果表明，在硝酸铕的原子化过程中，Ｅｕ（ＮＯ３）３先转化Ｅｕ２Ｏ３，生成的Ｅｕ２Ｏ３经一系列的晶型转变之后，热分解为ＥｕＯ（ｓ），后者以ＥｕＯ（ｇ）形式蒸发进入气相。硝酸铕的原子化起源于ＥｕＯ（ｇ）的热分解。在１６６０Ｋ和１９２０Ｋ时有铕的碳化物ＥｕＣ２生成。     

Reversible pH-induced transformation of micellar aggregates between hemicylinders and laterally homogeneous layers at graphite-solution interfaces

pH-induced transformation between a hemicylindrical aggregate and a laterally homogeneous layer at the graphite-solution interface was demonstrated in micellar aggregates of dodecyldimethylamine oxide (C12DMAO) using atomic force microscopy (AFM). Nonionic C12DMAO (pH~8) and fully-ionized cationic C12DMAO (pH~1.5) both formed hemicylindrical aggregates on graphite, similar to aggregates formed by many other ionic (or nonionic) surfactants on graphite. However, a laterally homogeneous layer was observed in the case of nearly half-ionized C12DMAO around pH~4 (a 1:1 mixture of the nonionic and the cationic species). These results indicated that the surface curvature of the C12DMAO aggregates on graphite was the smallest around the degree of ionization =0.5, despite charging up the nonionic hemicylindrical aggregates. Using AFM images and the corresponding force curves, the transformation between the hemicylindrical aggregate and the laterally homogeneous layer was found to be reversible via a change in pH. The formation of the laterally homogeneous layer of nearly half-ionized C12DMAO is explained by hydrogen bond formation between the nonionic and the cationic headgroups.     

Carbon/carbon nanocomposites fabricated by base catalyzed twin polymerization of a Si-spiro compound on graphite sheets

Defect-free microporous carbon layers on graphite can be produced by DABCO-catalyzed twin polymerization of 2,2'-spirobi[4H-1,3,2-benzodioxasiline] in a slurry polymerization and subsequent thermal transformation of the resulting phenolic resin into carbon.     

Thermal exfoliation of electrochemically synthesized graphite intercalation compound with perrhenic acid

In present work, we describe the synthesis of graphite intercalation compounds with perrhenic acid (HReO₄-GIC) through the anodic oxidation of graphite in aqueous perrhenic acid solution and their thermal exfoliation. Due to electrochemical treatment of graphite in perrhenic acid solution, ReO₄⁻ ions are intercalated into interlayer spaces of graphite. Anodic oxidation of graphite in HReO₄ solution leads to the formation of 3-stage GIC. Simultaneously, some amount of perrhenic acid becomes deposited on the graphite surface and edges. In the next step, thermal treatment of the previously synthesized GIC was performed, causing both the exfoliation of graphitic structure and transformation of perrhenic acid into rhenium oxides on the surface of graphene layers. The yielded product was exfoliated graphite-ReO₂/ReO₃ composite. The obtained composite was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy. Additionally, specific surface area of the exfoliated materials was measured.

     

The effect of the sintering atmosphere on the densification of B4C ceramics

Densification of boron carbide during sintering may be improved by a two-stage process, namely heating to 2000°C under vacuum and sintering at 2190°C under argon. This sintering regime allows achieving a relative density of the ceramic bodies fabricated from a fine powder higher than 95%. The nitrogen treatment of the boron carbide phase at 1900°C leads to the formation of the BN phase and precipitation of graphite. Vacuum treatment of these samples at 2000°C leads to decomposition of the boron nitride phase. The liberated free boron may again react with graphite to form in situ boron carbide particles. The experimental investigations of the sintering behavior of the boron carbide phase under various atmospheres supported the thermodynamic predictions regarding the phase transformation. No evidence, however, was found for enhanced sintering under a nitrogen atmosphere.     

稀土奥贝蠕铁制取工艺及其性能的研究

稀土奥贝蠕铁可用含稀土的蠕化剂及等温淬火工艺稳定地制取,藉助高温扫描电子显微镜,观察并研究了稀土蠕铁奥氏体化过程及稀土奥贝蠕铁随温度升高时组织的变化。用带有加热装置的万能材料试验等土奥贝蠕铁的各种性能进行了系统测定了如抗拉强度、延伸率、冲吉韧性、热膨胀系数及伸长百分率,结果表明,稀土奥贝蠕铁在室温和高温下均有良好的性能。     

Uncontrollable expansion of PbZn1/3Nb2/3O3-PbTiO3 perovskite⇒pyrochlore transition during spark plasma sintering: Mechanism proposal using infinite periodic minimal surfaces

The PbZn_1/3Nb_2/3O₃-PbTiO₃ phase (PZN-PT) prepared by mechanosynthesis exhibits interesting relaxor properties when transformed into nanostructured ceramic by spark plasma sintering. When trying to obtain denser ceramic to enhance physical properties, the PZN-PT phase transformation from perovskite to pyrochlore structure induces the graphite die explosion. An explanation of this phenomenon is based on the reorganization of the lone pairs corresponding to Pb²⁺ cations into the large cavities of pyrochlore network, inducing an important cell volume increase, together with the speed of transformation depicted in the light of infinite periodic minimal surfaces describing the perovskite (P-surface) and the pyrochlore (F-surface) networks, respectively.     

An experimental and theoretical study of butyl methacrylate in situ radical polymerization kinetics in the presence of graphene oxide nanoadditive

The butyl methacrylate radical polymerization kinetics in the presence of graphene oxide nanoadditive is studied both experimentally and theoretically. The experimental study includes the formation of graphite oxide from the oxidation of graphite and its subsequent transformation to graphene oxide (GO) after ultrasonication and in situ polymerization. Monomer conversion versus time was monitored gravimetrically at various reaction temperatures and initial GO fractions. Formation of GO was verified by X‐ray diffraction spectra and the number and weight average molecular weights of the final polymer were obtained from GPC measurements. A detailed theoretical kinetic model was further developed. The model predictions were found to be in satisfactory agreement with the experimental data. The presence of GO was found to result in reduced initiator efficiency verified theoretically and explained through side reactions of primary radicals. Finally, nanocomposites showed enhanced thermal stability compared to neat PBMA. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1433–1441     

Negatively curved graphite and triply periodic minimal surfaces

The Weierstrass representation has been used to construct negatively curved graphite in which atoms rest no a perfect triply periodic minimal surface. By applying the Bonnet transformation on a patch of the D surface decorated with graphite we have been able to construct the Gyroid and P minimal surfaces. Curvatures, densities and lattice parameters have been calculated. It has been found that the maximum Gaussian curvature for our negatively curved structures is less in magnitude than the Gaussian curvature ofC ₆₀. In addition, a new periodic graphitic set with the same topology as the I-WP minimal surface has been obtained by introducing pentagonal and octagonal rings.     

Low-temperature transformations of sodium sulfate and sodium selenite in the presence of pre-reduced palladium modifier in graphite furnaces for electrothermal atomic absorption spectrometry

The low-temperature interaction (up to 550°C) of a pre-reduced palladium modifier with sodium sulfate and sodium selenite on the pyrolytic graphite platform was studied using X-ray photoelectron spectroscopy (XPS) and electron microprobe analysis. The equipment applied allowed the introduction of samples heated in an argon flow into the analytical chamber of the XPS spectrometer without contact with the air. Electron microprobe analysis showed that palladium and sulfur preferably occupy different areas on the platform surface. On the contrary, selenium from sodium selenite tends to occupy areas of the graphite surface covered with palladium. The most probable reason for this is the chemisorption of selenium (IV) on the palladium surface at the drying stage. No changes in the XPS spectra of metallic Pd and S⁶⁺ were observed when Na₂SO₄ and Pd were heated together on the graphite platform in the range 100–550°C. The reduction of sodium selenite on the graphite surface already starts during drying. Pre-reduced palladium intensifies this process. The rate of the reduction is proportional to the amount of palladium, and in the presence of palladium at an atomic ratio of Pd/Se=7.5, the transformation of Se⁴⁺ into Se⁰ completes at 250°C.     

粒度对石墨负极材料嵌锂性能的影响

研究了不同粒径（13～80 μm）石墨材料作为锂离子电池负极材料的嵌锂性能.结果表明，石墨粒度大小对嵌锂性能有明显影响，石墨的不可逆容量随着粒径的减小而逐渐增大，当粒径从80 μm减小到13 μm时，其不可逆容量增大了10％.而对可逆容量来说，随着粒径的减小，可逆容量逐渐增大;当粒径减小到20 μm时，可逆容量达到最大;再进一步减小石墨颗粒的粒径，可逆容量则随之减小.这表明石墨颗粒过大或过小都不利于锂离子的可逆脱嵌，只有合适的粒度才能最大限度地可逆脱嵌锂离子.根据不同粒度石墨的比表面的变化趋势，阐述了嵌锂性能随粒度变化的原因.     

Fluorination of treated carbon

Graphite fluoride is classified into (C₂F)n and (CF)n types from the structure and composition. Both compounds have such unique physicochemical properties as low surface energy, solid lubricating characteristics, and oxidizing ability. However, a long reaction time is required to completely fluorinate graphite and moreover, the decomposition reaction of the product causes the lowering of the yields.In this paper, the effect of the pretreatments of the starting material on the fluorination will be reported on the following methods.1) Fluorination of Exfoliated Graphite Obtained by Heat-treatment of Graphite Lamellar Compound.The exfoliated graphite was obtained by the immersion of graphite into the mixed solution of sulfuric acid and hydrogen peroxide and subsequent heat-treatment. It has both much large surface area and larger lattice strain than that of the original graphite.The exfoliated graphite was much faster fluorinated than the original graphite. The dissociation of fluorine molecules to atoms was found to be a rate-determining step in the formation of graphite fluoride from the exfoliated graphite, whereas the process of diffusion of fluorine molecules was the rate-determining step in the fluorination of the original graphite.2) Fluorination of Residual Carbon Formed upon Pyrolysis of Graphite Fluoride.Graphite fluoride decomposes to carbon and some perfluorocarbons of low molecular weight at high temperature above 600 °C. The residual carbon was amorphous in analogy with petroleum coke or carbon black, but had smaller interlayer spacing and larger specific surface area due to its microporous structure than these amorphous carbonsThe rate of the direct fluorination of residual carbon at a room temperature was comparable to that of active carbon, and the graphite fluoride obtained from the residual carbon has a similar high thermostability to that of graphite fluoride obtained from graphite at a high temperature under an atmosphere of fluorine gas. Upon direct fluorination of the residual carbon a more crystalline graphite fluoride was obtained even at a low temperature than the case of petroleum coke and carbon black. It is interesting that the fluorination of the residual carbon leads to the formation of crystalline graphite fluoride in high yield.