Graphene Oxide Modified Chemically Activated Graphite Electrodes for Detection of microRNA

In our study, graphene oxide (GO) modified graphite electrodes were used for sensitive and selective impedimetric detection of miRNA. After chemical activation of pencil graphite electrode (PGE) surface using covalent agents (CA), GO modification was performed at the surface of chemically activated PGE. Then, CA‐GO‐PGEs were applied for impedimetric miRNA detection. The microscopic and electrochemical characterization of CA‐GO‐PGEs was performed by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The optimization of experimental conditions; such as GO concentration, DNA probe concentration and miRNA target concentration was performed by using EIS technique. After the hybridization occurred between miRNA‐34a RNA target and its complementary DNA probe, the hybrid was immobilized onto the surface of CA‐GO‐PGEs. Then, the impedimetric detection of miRNA‐DNA hybridization was performed by EIS. The selectivity of our assay was also tested under the optimum experimental conditions.     

Impedimetric sensing of uranyl ion based on phosphate functionalized cysteamine self-assembled monolayers

A phosphate functionalized cysteamine self-assembled monolayer based on gold electrode is designed for uranyl ion (UO₂²⁺) detection. The response of the modified electrode is studied by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry. The EIS data are approximated using constant phase element (CPE) model from which kinetic and analytical parameters are evaluated. Uranyl ion is recognized based on blocking effect against charge transfer between p-benzoquinone as a probe and the modified electrode. This effect is detected from linear variation of charge transfer resistance (R_ct) as a function of UO₂²⁺ concentration. From the analysis of the EIS data and approximated parameters, a method is developed for UO₂²⁺ determination based on impedimetric measurements.     

Monitoring microbial populations of sulfate-reducing bacteria using an impedimetric immunosensor based on agglutination assay

An impedimetric immunosensor was fabricated for rapid and non-labeled detection of sulfate-reducing bacteria, Desulforibrio caledoiensis (SRB) by immobilizing lectin-Concanavalin A using an agglutination assay. The immobilization of lectin was conducted using amine coupling on the surface of a gold (Au) electrode assembled with 11-Mercaptoundecanoic acid. Electrochemical impedance spectroscopy (EIS) was used to verify the stepwise assembly of the sensor system. The work conditions of the impedimetric immunosensor, such as pH of the buffer solutions and the incubation time of lectin, were optimized. Faradic impedance spectra for charge transfer for the redox probe Fe(CN)₆^3−/4−were measured to determine SRB concentrations. The diameter of the Nyquist diagram that is equal to the charge-transfer resistance (R_ct) increased with increasing SRB concentration. A linear relationship between R_ct and SRB concentration was obtained in SRB concentration range of 1.8 to 1.8 × 10⁷ cfu/ml. The variation of the SRB population during the growth process was also monitored using the impedimetric immunosensor. This approach has great potential for simple, low-cost, and time-saving monitoring of microbial populations.     

Characterization of the gold-catalyzed deposition of silver on graphite screen-printed electrodes and their application to the development of impedimetric immunosensors

This paper describes the characterization of the gold-catalyzed deposition of silver on graphite screen-printed electrodes (SPEs) using electrochemical impedance spectroscopy (EIS) and the application of this approach to the development of impedimetric immunosensors. After applying −0.1 V for 45 s, the amount of electrodeposited silver quantitatively changes the magnitude of two elements of the electrical equivalent circuit: the interface capacitance, Ci, and the charge-transfer resistance, R_CT. Better correlations have been found when considering the R_CT since this parameter is almost exclusively dependent on the amount of deposited silver under these experimental conditions. This approach has been successfully applied to the development of an impedimetric immunosensor for aflatoxin M₁. The R_CT magnitude shows good correlation with the amount of gold immobilized on the electrode surface after a competitive assay and thus, with the toxin concentration. This approach has been found sensitive in a wide range of concentrations, from 15 to 1000 free-AFM₁ ppt with a limit of detection of 12 ppt.     

Impedimetric Aptasensor Based on Disposable Graphite Electrodes Developed for Thrombin Detection

The impedimetric aptasensor for Thrombin (THR) was developed for the first time herein by measuring changes at the charge‐transfer resistance, R_ct upon to protein? aptamer complex formation. After covalent activation of pencil graphite electrode (PGE) surface using covalent agents, amino linked aptamer (APT) was immobilized onto activated PGE surface. Then APT‐THR interaction was explored by electrochemical impedance spectroscopy (EIS). After the optimization of experimental conditions (e.g., APT and THR concentration, immobilization and interaction times), the selectivity of impedimetric aptasensor was tested in the presence of other biomolecules: factor Va and bovine serum albumine (BSA) both in buffer media, or in diluted fetal bovine serum (FBS).     

Functionalization of gold cysteamine self-assembled monolayer with ethylenediaminetetraacetic acid as a novel nanosensor

Electrochemical characterization of gold cysteamine self-assembled monolayer, in situ functionalized with ethylenediaminetetraacetic acid (Au-CA-EDTA SAM), is described by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and Osteryoung square wave voltammetry (OSWV). The results obtained by EIS and CV, in the presence of [Fe(CN)₆]^3−/4− redox probe, show that EDTA is successfully grafted to the surface of Au-CA electrode. Reproducible and reversible variation of the R_ct and ΔEp as a function of solution pH show that Au-CA-EDTA SAM is stable in a wide range of pH and potentials. Accumulation of the Pb²⁺ and Cu²⁺ ions on the Au-CA-EDTA SAM electrode is investigated using faradaic currents or impedimetric effects measured by OSWV and EIS, respectively. These results reveal the presence of active complexing functional groups of EDTA on the surface, and thus, the formation of Au-CA-EDTA SAM electrode. The new sensor responds to the Pb²⁺ and Cu²⁺ separately and simultaneously in a wide linear range of concentrations.     

Influence of gold nanoparticle size (2-50 nm) upon its electrochemical behavior: an electrochemical impedance spectroscopic and voltammetric study

The electrochemical behavior of different size gold nanoparticles (AuNPs) was investigated. AuNPs with 2, 5, 10, 15, 20 and 50 nm diameters were immobilized onto a screen printed carbon electrode surface by physical adsorption. The impedimetric response was measured for different diameter AuNPs at a fixed value of their surface area, at the same content of gold (Au) and at the same concentration. In a further experiment, the impedimetric response toward AuNP concentration was measured for each diameter. Impedimetric results were compared with results obtained for the detection of Au by stripping voltammetry. Additionally, variability of active surface area and roughness of different electrodes before and after immobilization of AuNPs were carefully evaluated by means of cyclic voltammetry and laser scanning microscopy. Electrochemical impedance spectroscopy (EIS) is a sensitive technique capable of differentiating the signal generated by AuNPs of different sizes, thus providing useful information for the employment of AuNPs in electrochemical biosensors.     

Internal surface polarity of regenerated cellulose gel depends on the species used as coagulant

We report the development of a new selective and specific electrochemical biosensor for bacterial lipolysaccharide (LPS). An electrode interface was constructed using a l-cysteine-gold nanoparticle (AuNpCys) composite to be immobilized by electrostatic interaction in the network of a poly(vinyl chloride-vinyl acetate maleic acid) (PVM) layer on a gold bare electrode. The impedimetric biosensor is fabricated by self-assembled CramoLL lectin on the PVM-AuNpCys-modified gold electrode through electrostatic interaction. CramoLL is used as the recognition interface. AFM images showed that LPS was specifically recognized on the PVM-AuNpCys-CramoLL system surface. The measurements of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) showed that the electrochemical response of a redox probe system (K(4)[Fe(CN)(6)](4-)/K(3)[Fe(CN)(6)](3-)) were blocked, due to the procedures of modified electrode with PVM-AuNpCys-CramoLL. In the majority of the experiments the lectin retained its activity as observed through its interaction with LPS from Escherichia coli, Serratia marcescens, Salmonella enterica and Klebsiella pneumoniae. The results are expressed in terms of the charge transfer resistance and current peak anodic using the EIS and CV techniques for the development of a biosensor for contamination by endotoxins. A new type of sensor for selective discrimination of LPS types with a high sensitivity has been obtained.     

Electrochemical studies of a novel biosensor based on the CuO nanoparticles coated with horseradish peroxidase to determine the concentration of phenolic compounds

The present work is an attempt to design new electrochemical biosensor that easily determines the concentration of phenolic compounds in water and wastewaters. It is well-known that enzymes can add selectivity towards one or limited number of compounds. Thus, in the present study, horseradish peroxidase (HRP) was coated on CuO nanoparticles and immobilized on the electrode using a thin polymeric film. The electrochemical studies of modified electrode were carried out by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The voltammetric and EIS results confirm the possibility of HRP direct electron transfer at CuO nanoparticles. Our results revealed that the modified electrode can be used to determine the phenol concentration in the standard solutions and real samples. The present biosensor has good relative standard deviation (RSD% = 7%) and detection limit (DL of 0.1 μM), in addition to high stability.     

Labelless impedance immunosensor based on polypyrrole-pyrolecarboxylic acid copolymer for hCG detection

In this work, a sensitive label-free impedimetric hCG-immunosensor was constructed by using a commercial screen-printing carbon ink electrode (namely disposable electrochemical printed chip) as the basis. The carbon ink electrode of DEP chip is modified first by deposition of polypyrrole-pyrole-2-carboxylic acid copolymer and thence hCG antibody immobilization via the COOH groups of pyrrole-2-carboxylic acid, which can serve as a linker for covalent biomolecular immobilization. The experimental results exposed that the designed immunosensor is more sensitive than other previously reported immunosensors, in the case of detection limit and linear range for antigen detection. With optimal fabrication parameters, the detection limit for α-hCG was 2.3 pg/mL in 10 mM phosphate buffer saline (PBS) solution containing 1% bovine serum albumine (BSA). Moreover, the use of inexpensive DEP chip as a basis for these immunosensors will allow for simple instrumentation, disposable and portable at low cost. This work also demonstrates a new approach to develop a sensitive and label-free impedimetric immunosensor based on screen-printed electrode for applications in clinical diagnosis.     

Catalytic Oxidation of Dopamine at a Nickel Hexacyanoferrate Surface Modified Graphite Wax Composite Electrode Coated with Nafion

A chemically modified electrode was successfully fabricated by means of depositing a thin layer of nickel hexacyanoferrate (NiHCF) on an amine adsorbed graphite paraffin wax composite electrode using a new approach. The electrode was further coated with Nafion. The electrochemical characteristics of the modified electrode were studied using cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The modified electrode catalyzed dopamine (DA) oxidation in the concentration range of 1.5×10^?6 to 1.2×10^?3 M without the interference from ascorbic acid (AA). A detection limit of 4.9×10^?7 M was obtained for DA in the presence of AA with a correlation coefficient of 0.9972 based on S/N=3. Flow injection analysis was used for the determination of dopamine with excellent reproducible results. The analytical utility of the sensor was evaluated for detection of DA in urine.     

Application of the avidin–biotin interaction to immobilize DNA in the development of electrochemical impedance genosensors

Impedance spectroscopy is a rapidly developing technique for the transduction of biosensing events at the surface of an electrode. The immobilization of biomaterial as DNA strands on the electrode surface alters the capacitance and the interfacial electron transfer resistance of the conductive electrodes. The impedimetric technique is an effective method of probing modifications to these interfacial properties, thus allowing the differentiation of hybridization events. In this work, an avidin bulk-modified graphite–epoxy biocomposite (Av-GEB) was employed to immobilize biotinylated oligonucleotides as well as double-stranded DNA onto the electrode surface. Impedance spectra were recorded to detect the change in the interfacial electron transfer resistance (R _et) of the redox marker ferrocyanide/ferricyanide at a polarization potential of +0.17 V. The sensitivity of the technique and the good reproducibility of the results obtained with it confirm the validity of this method based on a universal affinity biocomposite platform coupled with the impedimetric technique.     

Electrochemical impedance spectroscopy as a highly sensitive tool for a dynamic interaction study between heparin and antithrombin: a novel antithrombin sensor

Specific recognition between two biological partners is widely exploited in biosensors nowadays. To explore this avenue, a novel biosensor for antithrombin (AT) detection was constructed. Heparin was used as the affinity ligand.A well-known acrylic monomer (butyl methacrylate) was polymerized and grafted onto the heparin polysaccharide by the use of ceric ammonium nitrate as a redox initiator in aqueous nitric acid medium. Polymers were deposited as a thin layer onto surface of stainless steel electrode (SS316L).The obtained polymers were studied by Fourier transform infrared spectroscopy (FTIR) and analyzed by differential scanning calorimetry (DSC).Moreover, the films were characterized by electrochemical impedance spectroscopy (EIS), contact-angle measurements and AFM.EIS was used to study the biosensor affinity to AT and the relationship between functionalization growth of modified electrode and the response of the sensor.The proposed approach appears to be simple, sensitive and correlated with methods that analyse the detection of antithrombin.     

A sensitive and label-free impedimetric biosensor based on an adjunct probe

A highly sensitive and label-free impedimetric biosensor is achieved based on an adjunct probe attached nearby the capture probe. In this work, the adjunct probe was co-assembled on the surface of gold electrode with the capture probe hybridized with the reporter probe, and then 6-mercapto-1-hexanol was employed to block the nonspecific binding sites. When target DNA was added, the adjunct probe functioned as a fixer to immobilize the element of reporter probe displaced by the target DNA sequences and made the reporter probe approach the electrode surface, leading to effective inhibition of charge transfer. The increase in charge transfer resistance is related to the quantity of the target DNA in a wide range. The linear range for target DNA with specific sequences was from 0.1 nM to 0.5 μM with a good linearity (R = 0.9988) and a low detection limit of 6.3 pM. This impedimetric biosensor has the advantages of simplicity, sensitivity, good selectivity, and large dynamic range.     

Carbon nanotubes as a secondary support of a catalyst layer in a gas diffusion electrode for metal air batteries

In this paper, we report the use of binary carbon supports (carbon nanotubes (CNTs) and active carbon) as a catalyst layer for fabricating gas diffusion electrodes. The electrocatalytic properties for the oxygen reduction reaction (ORR) were evaluated by polarization curves and electrochemical impedance spectroscopy (EIS) in an alkaline electrolyte. The binary-support electrode exhibits better performance than the single-support electrode, and the best performance is obtained when the mass ratio of carbon nanotubes and active carbon is 50:50. The results from the electrode kinetic parameters indicate that the introduction of carbon nanotubes as a secondary support provides high accessible surface area, good electronic conductivity, and fast ORR kinetics. Furthermore, the effect of CNT support on the electrocatalytic properties of Pt nanoparticles for binary-support electrodes was also investigated by different loading-reduction methods. The electrocatalytic activity of the binary-support electrodes is improved dramatically by Pt loading on CNT carbon support, even at very low Pt loading. Additionally, the EIS analysis results indicate that the process of ORR may be controlled by diffusion of oxygen in the electrode thin film for binary-support electrodes with or without Pt catalyst.     

Coupled electrochemical-chemical procedure used in construction of molecularly imprinted polymer-based electrode: a highly sensitive impedimetric melamine sensor

A novel molecularly imprinted sensor was fabricated and used for the impedimetric detection of melamine. Considering the identity of polymeric film and the pK _a of a melamine template, an effective procedure was established to construct the MIP-based melamine sensor. The proposed method is based on the electropolymerization of pyrrole (Py) in the presence of melamine on the electrochemically reduced graphene oxide modified glassy carbon electrode (ERGO/GCE), followed by treatment with the solution of 1% H₂O₂ in alkaline water/CH₃CN-mixed solvents. The surface morphology and the electrical feature of molecularly imprinted polymer (MIP) were characterized by scanning electron microscopy (SEM), Fourier transformation infrared spectroscopy (FTIR), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The EIS was also utilized to transduce the change of charge transfer resistance (R _ct) at the interface of polymer film-electrolyte, after subsequent incubation of electrode in the solution containing different concentrations of analyte, and consequently, a linear response was obtained over the range of 4.0 to 240 nM with a detection limit of 0.83 nM (S/N = 3). The effect of possible interferences on the response of sensor was studied, and the results confirmed the good selectivity of the proposed device for melamine assay. The MIP sensor was successfully applied to determine melamine in a multiple concentration-spiked milk sample.     

Enzyme-free impedimetric glucose sensor based on gold nanoparticles/polyaniline composite film

A non-enzymatic impedimetric glucose sensor was fabricated based on the adsorption of gold nanoparticles (GNPs) onto conductive polyaniline (PANI)-modified glassy carbon electrode (GCE). The modified electrode (GCE/PANI/GNPs) was characterized by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The determination of glucose concentration was based on the measurement of EIS with the mediation of electron transfer by ferricyanide ([Fe(CN)₆]^3?). The [Fe(CN)₆]^3? is reduced to ferrocyanide ([Fe(CN)₆]^4?), which in turn is oxidized at GCE/PANI/GNPs. An increase in the glucose concentration results in an increase in the diffusion current density of the [Fe(CN)₆]^4? oxidation, which corresponds to a decrease in the faradaic charge transfer resistance (R _ct). A wide linear concentration range from 0.3 to 10 mM with a lower detection limit of 0.1 mM for glucose was obtained. The proposed sensor shows high sensitivity, good reproducibility, and stability. In addition, the sensor exhibits no interference from common interfering substances such as ascorbic acid, acetaminophen, and uric acid.     

Integrating proteomics with electrochemistry for identifying kinase biomarkers

We present an integrated approach for highly sensitive identification and validation of substrate-specific kinases as cancer biomarkers. Our approach combines phosphoproteomics for high throughput cancer-related biomarker discovery from patient tissues and an impedimetric kinase activity biosensor for sensitive validation. Using non-small-cell lung cancer (NSCLC) as a proof-of-concept study, label-free quantitative phosphoproteomic analysis of a pair of cancerous and its adjacent normal tissues revealed 198 phosphoproteins that are over-phosphorylated in NSCLC. Among the differentially regulated phosphorylation sites, the most significant alteration was in residue S165 in the Hepatoma Derived Growth Factor (HDGF) protein. Hence, HDGF was selected as a model system for the electrochemical studies. Further motif-based analysis of this altered phosphorylation site revealed that extracellular-signal-regulated kinase 1/2 (ERK1/2) are most likely to be the corresponding kinases. For validation of the kinase–substrate pair, densely packed peptide monolayers corresponding to the HDGF phosphorylation site were coupled to a gold electrode. Phosphorylation of the monolayer by ERK2 and dephosphorylation by alkaline phosphatase (AP) were detected by electrochemical impedance spectroscopy (EIS) and surface roughness analysis. Compared to other methods for quantification of kinase concentration, this label-free electrochemical assay offers the advantages of ultra-sensitivity as well as higher specificity for the detection of cancer-related kinase–substrate pair. With implementation of multiple kinase–substrate biomarker pairs, we expect this integrated approach to become a high throughput platform for discovery and validation of phosphorylation-mediated biomarkers.     

Characterization of an ion-selective polypyrrole coating and application to the joint determination of potassium, sodium and ammonium by electrochemical impedance spectroscopy and partial least squares method

A stable immobilization of ionophores (INPHs) was achieved by selectively electropolymerizing overoxidized pyrrol on the working electrode surface. The optimal conditions found allowed the immobilization of a huge amount of INPH which remained its recognition properties. A single sensing chip, containing a generic INPH or an INPH mixture, was employed to the joint quantification of potassium, ammonium and sodium in fertilizer samples. Electrochemical impedance spectroscopy (EIS) and partial least square (PLS) regression were used to obtain and process the data, respectively. The sensing element (INPH) and the exposure time were optimized. The best results were obtained by using the dibenzo-18-crown-6 INPH after waiting for 60 s, the time required to stabilize the impedimetric measurement. Taking into account that a single chip was employed, acceptable relative errors were obtained in the determination of potassium and ammonium (17% and 9%, respectively) in real fertilizer samples, also containing sodium. Although sodium concentration could not be estimated with precision, it had to be introduced into the calibration set data in order to model its interference with the other two ions.     

Functional cellular assays with multiparametric silicon sensor chips

Multiparametric silicon sensor chips mounted into biocompatible cell culture units have been used for investigations on cellular microphysiological patterns. Potentiometric, amperometric and impedimetric microsensors are combined on a common cell culture surface on the chip with an area of approximately 29 mm2. Extracellular acidification rates (with pH-sensitive field effect transistors, ISFETs), cellular oxygen consumption rates (with amperometric electrode structures) and cell morphological alterations (with impedimetric electrode structures, IDES) are monitored on single chips simultaneously for up to several days. The corresponding test device accommodates six of such sensor chips in parallel, provides electronic circuitry and maintains the required cell culture conditions (temperature, fluid perfusion system). Sensor data are transformed into quantitative information about microphysiologic conditions. The outcome of this transformation as well as reliability and sensitivity in detection of drug effects is discussed. This is the first report on multiparametric cell based assays with data obtained solely with integrated sensors on silicon chips. Those assays are required in different fields of application such as pharmaceutical drug screening, tumor chemosensitivity tests and environmental monitoring.