How does a transient amorphous precursor template crystallization

Crystallization through metastable phases, such as polymorphism, plays an important role in chemical manufacture, biomineralization, and protein crystallization. However, the kinetics creating the final stable crystalline phase from metastable phases has so far remained unclear. In this study, crystallization via an amorphous precursor, the so-called multistep crystallization (MSC), is studied quantitatively in a colloidal model system. In MSC, amorphous dense droplets are first nucleated from the mother phase. Subsequently, a few unstable subcrystalline nuclei can be created simultaneously by fluctuation from the tiny dense droplets, which is different from previous theoretical predictions. It is necessary for these crystalline nuclei to reach a critical size N*(crys) to become stable. However, in contrast to subcrystalline nuclei, a stable mature crystalline nucleus is not created by fluctuation but by coalescence of subcrystalline nuclei, which is unexpected. To accommodate a mature crystalline nucleus larger than the critical size N*(crys), the dense droplets have to first acquire a critical size N*. This implies that only a fraction of amorphous dense droplets can serve as a precursor of crystal nucleation. As an outcome, the overall nucleation rate of the crystalline phase is, to a large extent, determined by the nucleation rate of crystals in the dense droplets, which is much lower than the previous theoretical expectation. Furthermore, it is surprising to see that MSC will promote the production of defect-free crystals. The knowledge acquired in this study will also significantly advance our understandings in polymorphism related processes.     

Mechanism of Crystalline Self‐Assembly in Aqueous Medium: A Combined Cryo‐TEM/Kinetic Study

Understanding the crystallization of organic molecules is a long‐standing challenge. Herein, a mechanistic study on the self‐assembly of crystalline arrays in aqueous solution is presented. The crystalline arrays are assembled from perylene diimide (PDI) amphiphiles bearing a chiral N‐acetyltyrosine side group connected to the PDI aromatic core. A kinetic study of the crystallization process was performed using circular dichroism spectroscopy combined with time‐resolved cryogenic transmission electron microscopy (cryo‐TEM) imaging of key points along the reaction coordinate, and molecular dynamics simulation of the initial stages of the assembly. The study reveals a complex self‐assembly process starting from the formation of amorphous aggregates that are transformed into crystalline material through a nucleation–growth process. Activation parameters indicate the key role of desolvation along the assembly pathway. The insights from the kinetic study correlate well with the structural data from cryo‐TEM imaging. Overall, the study reveals four stages of crystalline self‐assembly: 1) collapse into amorphous aggregates; 2) nucleation as partial ordering; 3) crystal growth; and 4) fusion of smaller crystalline aggregates into large crystals. These studies indicate that the assembly process proceeds according to a two‐step crystallization model, whereby initially formed amorphous material is reorganized into an ordered system. This process follows Ostwald’s rule of stages, evolving through a series of intermediate phases prior to forming the final structure, thus providing an insight into the crystalline self‐assembly process in aqueous medium.     

Evolution of size and shape in the colloidal crystallization of gold nanoparticles

The addition of dodecanethiol to a solution of oleylamine-stabilized gold nanoparticles in chloroform leads to aggregation of nanoparticles and formation of colloidal crystals. Based on results from dynamic light scattering and scanning electron microscopy we identify three different growth mechanisms: direct nanoparticle aggregation, cluster aggregation, and heterogeneous aggregation. These mechanisms produce amorphous, single-crystalline, polycrystalline, and core-shell type clusters. In the latter, gold nanoparticles encapsulate an impurity nucleus. All crystalline structures exhibit fcc or icosahedral packing and are terminated by (100) and (111) planes, which leads to truncated tetrahedral, octahedral, and icosahedral shapes. Importantly, most clusters in this system grow by aggregation of 60-80 nm structurally nonrigid clusters that form in the first 60 s of the experiment. The aggregation mechanism is discussed in terms of classical and other nucleation theories.     

Use of Aggregation‐Induced Emission for Selective Detection of Phase Transformation during Evaporative Crystallization of Hexaphenylsilole

Crystallization of organic molecules is quite complicated because the crystallization process is governed by weak intermolecular interactions. By exploiting aggregation‐induced emission (AIE), we attempted to realize the selective detection of phase transformation during the evaporative crystallization of hexaphenylsilole (HPS), which shows different fluorescent colors in the amorphous and crystalline phases. No fluorescence emission was observed in the HPS solution immediately after dropping on the glass substrate due to the non‐radiative deactivation induced by intramolecular rotational or vibrational motion, suggesting that HPS exists as a monomer in solution. As time elapsed after dropping, green emission first appeared, which changed to blue after solvent evaporation, because of phase transformation from the amorphous state to the crystalline state. This phenomenon supports not only the two‐step nucleation model involving an intermediate such as a liquid‐like cluster prior to nucleation but also the real‐time detection of Ostwald's rule of stages during evaporative crystallization.     

Effect of Escherichia coliform on the biomineralization of calcium bilirubinate in mimic systems

The influence of Escherichia coliform (E. coli), especially the proteins it secretes, on the nucleation, growth and aggregation processes of calcium bilirubinate (CaBR) in different mimic systems, such as NaCl aqueous solution and model bile, is studied in this paper. The results show that in NaCl aqueous solution the morphology of calcium bilirubinate (CaBR) changes from amorphous sheet structure to a highly self-organized and highly self-replicated fractal structure that is accumulated by rhombic microcrystals after the addition of E. coli. In model bile with the existence of E. coli, CaBR also forms a fractal structure, but the fractal structure is staghorn-like. Meanwhile, the composition of the prepared CaBRs is nonstoichiometric, and the crystallization is greatly improved with the existence of E. coli. Besides, formation mechanism of CaBRs affected by E. coli is explored, showing that the proteins secreted by E. coli interact with the Ca(2+) ions to provide nucleation sites for CaBRs, and the conformation of the proteins becomes more ordered, resulting in the improvement of the crystalline of CaBRs. On the other hand, the interaction of proteins and the Ca(2+) ions also promote the aggregation state of the CaBRs.     

Thermodynamics of crystalline nanonucleus formation from liquid phase

The energy of crystal nucleation from liquid phase was considered, with the following two stages taken into account: (1) the formation of metastable supercooled melt (solution), containing pre-nuclei with intermediate amorphous (quasicrystalline) structure, and (2) the transformation of amorphous clusters into solid crystalline nuclei having different structures. With growth of a nucleus the nucleation energy profile manifests 2–3 maxima corresponding to these stages, and the kinetics of the non-stationary nucleation has five characteristic variations.     

Order parameters for the multistep crystallization of clathrate hydrates

Recent reports indicate that the crystallization of clathrate hydrates occurs in multiple steps that involve amorphous intermediates and metastable clathrate crystals. The elucidation of the reaction coordinate for clathrate crystallization requires the use of order parameters able to identify the reactants, products, and intermediates in the crystallization pathway. Nevertheless, existing order parameters cannot distinguish between amorphous and crystalline clathrates or between different clathrate crystals. In this work, we present the first set of order parameters that discern between the sI and sII clathrate crystals, the amorphous clathrates, the blob of solvent-separated guests and the liquid solution. These order parameters can be used to monitor the advance of the crystallization and for the efficient implementation of methods to sample the rare clathrate nucleation events in molecular simulations. We illustrate the use of these order parameters in the analysis of the growth and the dissolution of clathrate crystals and the spontaneous nucleation and growth of clathrates under conditions of high supercooling.     

Deposition and crystallization studies of thin amorphous solid water films on Ru(0001) and on CO-precovered Ru(0001)

The deposition and the isothermal crystallization kinetics of thin amorphous solid water (ASW) films on both Ru(0001) and CO-precovered Ru(0001) have been investigated in real time by simultaneously employing helium atom scattering, infrared reflection absorption spectroscopy, and isothermal temperature-programmed desorption. During ASW deposition, the interaction between water and the substrate depends critically on the amount of preadsorbed CO. However, the mechanism and kinetics of the crystallization of approximately 50 layers thick ASW film were found to be independent of the amount of preadsorbed CO. We demonstrate that crystallization occurs through random nucleation events in the bulk of the material, followed by homogeneous growth, for solid water on both substrates. The morphological change involving the formation of three-dimensional grains of crystalline ice results in the exposure of the water monolayer just above the substrate to the vacuum during the crystallization process on both substrates.     

Can amorphous nuclei grow crystalline clathrates? The size and crystallinity of critical clathrate nuclei

Recent studies reveal that amorphous intermediates are involved in the formation of clathrate hydrates under conditions of high driving force, raising two questions: first, how could amorphous nuclei grow into crystalline clathrates and, second, whether amorphous nuclei are intermediates in the formation of clathrate crystals for temperatures close to equilibrium. In this work, we address these two questions through large-scale molecular simulations. We investigate the stability and growth of amorphous and crystalline clathrate nuclei and assess the thermodynamics and kinetic factors that affect the crystallization pathway of clathrates. Our calculations show that the dissociation temperature of amorphous clathrates is just 10% lower than for the crystals, facilitating the formation of metastable amorphous intermediates. We find that, at any temperatures, the critical crystalline nuclei are smaller than critical amorphous nuclei. The temperature dependence of the critical nucleus size is well described by the Gibbs-Thomson relation, from which we extract a liquid-crystal surface tension in excellent agreement with experiments. Our analysis suggests that at high driving force the amorphous nuclei may be kinetically favored over crystalline nuclei because of lower free energy barriers of formation. We investigated the role of the initial structure and size of the nucleus on the subsequent growth of the clathrates, and found that both amorphous and sI crystalline nuclei yield crystalline clathrates. Interestingly, growth of the metastable sII crystal polymorph is always favored over the most stable sI crystal, revealing kinetic control of the growth and indicating that a further step of ripening from sII to sI is needed to reach the stable crystal phase. The latter results are in agreement with the observed metastable formation of sII CO(2) and CH(4) clathrate hydrates and their slow conversion to sI under experimental conditions.     

Monte Carlo simulations of single crystals from polymer solutions

A novel "anisotropic aggregation" model is proposed to simulate nucleation and growth of polymer single crystals as functions of temperature and polymer concentration in dilute solutions. Prefolded chains in a dilute solution are assumed to aggregate at a seed nucleus with an anisotropic interaction by a reversible adsorption/desorption mechanism, with temperature, concentration, and seed size being the control variables. The Monte Carlo results of this model resolve the long-standing dilemma regarding the kinetic and thermal roughenings, by producing a rough-flat-rough transition in the crystal morphology with increasing temperature. It is found that the crystal growth rate varies nonlinearly with temperature and concentration without any marked transitions among any regimes of polymer crystallization kinetics. The induction time increases with decreasing the seed nucleus size, increasing temperature, or decreasing concentration. The apparent critical nucleus size is found to increase exponentially with increasing temperature or decreasing concentration, leading to a critical nucleus diagram composed in the temperature-concentration plane with three regions of different nucleation barriers: no growth, nucleation and growth, and spontaneous growth. Melting temperatures as functions of the crystal size, heating rate, and concentration are also reported. The present model, falling in the same category of small molecular crystallization with anisotropic interactions, captures most of the phenomenology of polymer crystallization in dilute solutions.     

Molecular dynamics study of the nucleation behavior and lamellar mergence in polyethylene globule crystallization

The site order parameter (SOP) has been adopted to analyze various orders of structure formation and distribution during the crystallization of a polyethylene globule simulated by molecular dynamics. The SOP not only identifies different orders among the structures but also different phases. The results showed that intermediate structures with medium order exist unevenly in the early stage of nucleation, which differs from traditional models. We found that the nucleation relies on crystallinity fluctuations with increasing amplitude, and a baby nucleus with different shape and increasing size suddenly appears in the fluctuations. Once its size is large enough, the baby nucleus becomes the nucleus. In the growth stage, a number of lamellar mergences were observed and their selective behaviors were related to the orientation differences between the lamellae to be merged. The SOP distribution of all atoms in the system during crystallization had two peaks: one for the amorphous phase and the other for the crystalline phase. The intermediate structures with medium orders are located between the two peaks as an order promotion pathway. The data show that the medium order structure fluctuates at the growth front and is not always available, and that the medium order structure existing at the front is not always good for development. It is possibly caused by chain entanglement. Structure fluctuation at the growth front enables the system showing thousands of the most probable configurations to approach the precursor. The growth front is thus active for a while and inactive at other times.     

Coalescence of nanobranches: a new growth mechanism for single crystal nanobelts

We report a fundamentally new growth mechanism for single crystalline nanobelts, namely, the growth and coalescence of nanobranches. The growth process of the nanobelts includes four typical steps such as nucleation and growth of the stem, nucleation and growth of the nanobranches at the expense of the stem, widening and geometrical coalescence of the nanobranches, and finally having nanobelts with perfect structure. The unique widening growth process of the nanobranches is apparently driven by the lattice distortion within the surface area of the stem. The continuous geometrical coalescence between the neighboring branches leads to the formation of the beltlike structures.     

Fe/Dy非晶多层膜晶化反应的热力学及动力学研究

由Miedema半经验公式计算出了Fe Dy二元系自由能图以揭示Fe Dy非晶多层膜的晶化本质。晶化受热力学和动力学两种因素控制 ,Fe,Dy晶态自由能低于初始非晶态 ,提供了晶化的热力学驱动力 ,而形核势垒及临界晶核尺寸控制了晶化反应的相选择 ,因而中等温度退火时先出现Fe晶粒 ,继而Dy晶粒 ,不出现金属间化合物。     

Photochemistry in the Low-Temperature Processing of Metal Oxide Thin Films by Solution Methods

Photochemistry has emerged in the last few years as a powerful tool for the low-temperature processing of metal oxide thin films prepared by solution methods. Today, its implementation into the fabrication procedure makes possible the integration of amorphous semiconductors or functional crystalline oxides into flexible electronic systems at temperatures below 350 °C. In this review, the effects of UV irradiation at the different stages of the chemical solution deposition of metal oxide thin films are presented. These stages include from the synthesis of the precursor solution to the formation of the amorphous metal-oxygen network in the film and its subsequent crystallization into the oxide phase. Photochemical reactions that can be induced in both the solution deposited layer and the irradiation atmosphere are first described, highlighting the role of the potential reactive chemical species formed in the system under irradiation, such as free radicals or oxidizing compounds. Then, the photochemical effects of continuous UV light on the film are shown, focusing on the decomposition of the metal precursors, the condensation and densification of the metal-oxygen network, and the nucleation and growth of the crystalline oxide. All these processes are demonstrated to advance the formation and crystallization of the metal oxide thin film to an earlier stage, which is ultimately translated into a lower temperature range of fabrication. The reduced energy consumption of the process upon decreasing the processing temperature, and the prospect of using light instead of heat in the synthesis of inorganic materials, make photochemistry as a promising technique for a sustainable future ever more needed in our life.     

Transient and athermal effects in the crystallization of polymers. I. Isothermal crystallization

The isothermal crystallization of poly(propylene) and poly(ethylene terephthalate) was investigated with differential scanning calorimetry and optical microscopy. It was found that the induction time depends on the cooling rate to a constant temperature. The isothermal crystallization of the investigated polymers is a complex process and cannot be adequately described by the simple Avrami equation with time‐independent parameters. The results indicate that crystallization is composed of several nucleation mechanisms. The homogeneous nucleation occurring from thermal fluctuations is preceded by the nucleation on not completely melted crystalline residues that can become stable by an athermal mechanism as well as nucleation on heterogeneities. The nucleation rate depends on time, with the maximum shortly after the start of crystallization attributed to nucleation on crystalline residues (possible athermal nucleation) and on heterogeneities. However, the spherulitic growth rate and the exponent n do not change with the time of crystallization. The time dependence of the crystallization rate corresponds to the changes in the nucleation rate with time. The steady‐state crystallization rate in thermal nucleation is lower than the rate determined in a classical way from the half‐time of crystallization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1835–1849, 2002     

New insights into the transformation of calcium sulfate hemihydrate to gypsum using time-resolved cryogenic transmission electron microscopy

We use time-resolved cryogenic transmission electron microscopy (TR-cryo-TEM) on a supersaturated solution of calcium sulfate hemihydrate to examine the early stages of particle formation during the hydration of the hemihydrate. As hydration proceeds, we observe nanoscale amorphous clusters that evolve to amorphous particles and then reorganize to crystalline gypsum within tens of seconds. Our results indicate that a multistep particle formation model, where an amorphous phase forms first, followed by the transformation into a crystalline product, is applicable even at time scales of the order of tens of seconds for this system. The addition of a small amount of citric acid significantly delays the reorganization to gypsum crystals. We hypothesize that available calcium ions form complexes with the acid by binding to the carboxylic groups. Their incorporation into a growing particle produces disorder and extends the time over which the amorphous phase exists. We see evidence of patches of "trapped" amorphous phase within the growing gypsum crystals at time scales of the order of 24 h. This is confirmed by complementary X-ray diffraction experiments. Direct imaging of nanoscale samples by TR-cryo-TEM is a powerful technique for a fundamental understanding of crystallization and many other evolving systems.     

Influence of conducting polymers based on carboxylated polyaniline on in vitro CaCO3 crystallization

Conducting polymers are interesting materials of technological applications, while the use of polymers as additives controlling crystal nucleation and growth is a fast growing research field. In the present article, we make a first step in combining both topics and report the effect of conducting polymer derivatives, which are based on carboxylated polyanilines (c-PANIs), on in vitro CaCO3 crystallization by the Kitano and gas diffusion method. This is the first example of the mineralization control of CaCO3 by a rigid carboxylated polymer. Both the concentration of c-PANI and the presence of carboxylate groups have a strong influence on the CaCO3 crystallization behavior and crystal morphology. X-ray diffraction (XRD) analysis shows crystalline calcite particles confirmed by FTIR spectra. pH and Ca2+ measurements during CaCO3 crystallization utilizing the Kitano and a constant-pH approach show a defined nucleation period of CaCO3 particles. The measurements allow for the calculation of the supersaturation time development, and the kinetic data can be combined with time-dependent light microscopy. The presence of c-PANIs delays the time of nucleation indicative of calcite nucleation inhibition. Microscopy illustrates the morphologies of CaCO3 crystals at all crystallization stages, from homogeneous spherical amorphous CaCO3 (ACC) particles corresponding to the first steps of crystallization to transition stage calcite crystals also involving a dissolution-recrystallization process in a late stage of crystallization. The data show that it is not possible to conclude the crystallization mechanism even for a very simple additive controlled crystallization process without time-resolved microscopic data supplemented by the analysis of the species present in the solution. Finally, fluorescence analysis indicates that conducting polymer derivatives can be incorporated into precipitated calcite particles. This gives rise to CaCO3 particles with novel and interesting optical properties.     

Effect of thermomechanical processing on the thermal stability of amorphous Fe-B alloys

Results from investigating the effect of thermomechanical processing on the thermal stability of amorphous Fe-B alloys are presented. It is shown that the combined thermomechanical processing of amorphous alloys raises the temperature of intense crystallization onset by 80 K for binary alloys; by 20–50 K, for multicomponent alloys. The greater expansion of the thermal stability interval of binary alloys relative to multicomponent alloys is explained by the presence of alloying dopants such as molybdenum, nickel, and silicon that inhibit the diffusion of boron and thus hinders nucleation and the growth of the crystalline phase. The enhanced thermal stability of amorphous alloys induced by thermomechanical processing is explained by the reduction in size of amorphous-phase frozen crystallization centers and by the formation of a nanostructured state.     

配液结晶法制备溶菌酶蛋白质晶体的生长机理研究

采用配液结晶法制取了溶菌酶蛋白质晶体, 使用动态光散射测量了溶液中聚集体的颗粒度几率分布; 使用Zeiss显微镜测定了溶菌酶(110)晶面的生长速度. 实验表明: 随着蛋白质和NaCl浓度的增加, 溶液中聚集体的颗粒尺寸也相应增加. 随着反应时间的增加, 溶菌酶分子在溶液中的聚集反应, 逐渐达到平衡; 在蛋白质和NaCl浓度较高时, 溶菌酶晶体的(110)面生长较快, 而在蛋白质和NaCl浓度较低时, 该晶面生长较慢. 基于二维成核生长机理, 从晶体生长动力学理论方程出发, 计算了二维成核的形成能α＝4.01×10^－8 J•cm^－2.     

无皂乳液聚合中单分散粒子的形成过程

在少量双官能团水溶性共单体(磺化丁二酸-聚乙二醇-烯丙基缩水甘油醚酯)存在下进行MMA/BA无皂乳液聚合,用CoulterLS230激光粒径分析仪研究了乳胶粒子的成核机理和单分散粒子的形成过程.乳胶粒子的成粒过程属多步成粒机理:先均相成核,形成不稳定的初始粒子,然后凝聚成稳定乳胶粒,其粒径分布经历了先变宽后变窄的过程,这是聚合过程中成核-凝聚-增长共同作用,相互竞争的结果.它还导致聚合初期出现周期成核的现象.