导电高聚物聚苯乙炔及其衍生物

聚苯乙炔(PPA)是一种具有半导体特性的高聚物。本文介绍了PPA及其衍生物的合成、化学结构与谱图及载流子的输运性质。     

聚苯撑的合成、性能及其应用

对直链型、树枝形聚苯撑的合成、性能及其应用作了介绍，并着重描述了聚苯撑的应用。     

苯硫酚等离子体聚会及其结构与性能

应用外部电容耦合式等离子体聚合装置．研究了苯硫酚等离子体聚合规律，找到了最佳聚合条件，通过热失重、红外光谱、X－射线衍射、电子衍射、GC－MS和接触角测定等研究了聚合物结构与性能。电导率测定表明等离子体聚苯硫酚具有半导体性质。     

聚苯氧基膦腈的合成及其电纺纤维的制备

以环状三聚六氯磷腈(HCCP)为原料,采用热开环聚合方法,合成了聚二氯磷腈,再利用亲核取代反应合成了聚苯氧基膦腈(PPPh).采用FT-IR、1H NMR、GPC、DSC、TGA等对所得到的聚合物进行了结构表征和性能测试.通过静电纺丝法制备聚苯氧基膦腈纤维,研究了纺丝液浓度、电场强度、挤出速度等对纤维形态的影响.结果表明,在聚合物溶液浓度为7(wt)%～8(wt)%、挤出速度为0.3～1.0 mL/h、接收距离为20cm、电压为22kV的静电纺丝条件下,可制备纤维直径为300～800 nm的PPPh纤维.     

无膦配体氧化钯催化合成树形低聚苯

树形低聚苯;交叉偶联;无膦配体氧化钯催化合成树形低聚苯     

聚硝基苯的合成,表征及反应机理的研究

在共轭高分子材料的研究中，聚苯一直是人们关注的热点之一［1～4]，但聚苯的不溶和不熔性大大限制了其应用前景，因而可溶性聚苯的开发研究成为目前的一种趋势．合成测基带有烷基和烷氧基的聚苯已有报道［5，6］，我们曾会成了侧基带有强推电子基团的可溶性聚苯——聚（N...     

WOBr_4催化聚苯乙炔的合成与表征

本文研究了苯乙炔在WOBr_4催化剂作用下的聚合行为,并对催化聚合机理进行了探讨。所得聚合物是可溶可熔的褐红色固体,其最高分子量为1830(M_n)。WOBr_4催化剂具有催化剂用量少(2/100),聚合反应时间短(10秒钟),产物收率高(80％以上)等特点。结构分析结果表明,WOBr_4催化聚苯乙炔具有顺-反式微观结构。     

新型聚苯并咪唑的研究进展

聚苯并咪唑是一类重复基元含苯并咪唑结构的芳香杂环聚合物,具有耐高温、耐腐蚀、高机械强度、高阻燃性等特点,被广泛应用于耐高温质子交换膜、防火阻燃及航空航天领域。近年来,各种不同结构的新型聚苯并咪唑不断被合成报道,新颖的结构基元赋予聚苯并咪唑改善的溶解性、提升的抗氧化性、高的酸负载水平及多孔特性,进一步拓展了聚苯并咪唑在吸附分离及燃料电池方面的应用。综述了新型聚苯并咪唑的研究进展,重点介绍了新型聚苯并咪唑的结构种类及其功能应用,旨在促进聚苯并咪唑研究的发展。     

聚苯并咪唑-锂盐-聚乙二醇单甲醚共混全固态聚合物电解质的制备及性能

使用共混后浇铸成膜的方法,制备了聚苯并咪唑-锂盐-聚乙二醇单甲醚组成的锂离子电池共混全固态聚合物电解质。通过傅里叶红外光谱(FT-IR)、X射线衍射(XRD)、差示扫描量热(DSC)、拉伸与交流阻抗测试表征了共混全固态电解质的结构与性能。研究了不同锂盐以及各组分含量对共混全固态电解质的力学性能与电导率的影响。结果表明:聚苯并咪唑与聚乙二醇单甲醚之间存在氢键;共混全固态电解质中聚乙二醇单甲醚处于无定形态;锂盐的加入使聚乙二醇单甲醚的玻璃化转变温度下降;聚乙二醇单甲醚含量越高,共混膜强度越低,电导率越高,并且使用三氟甲磺酸锂作为锂盐时其电导率最高,室温下可以达到3.58×10~(-5) S/cm,高温下可以达到3.3×10~(-3) S/cm,高温下满足对锂离子电池的使用需求。     

苯基取代聚苯撑乙烯的合成及其电致发光性能

聚苯撑乙烯(PPV)类聚合物是优异的发光材料, 有望作为全色显示中三基色的材料之一得到应用. 我们采用2-溴-1,4-亚二甲苯二乙酯为原料, 合成了商品名为Supper Yellow PPV (SY PPV)的苯基取代PPV. 中间体、单体和聚合物的结构都通过核磁共振、元素分析进行了表征. SY PPV的吸收峰在434 nm, 吸收边在510 nm, 带隙2.44 eV. 光致发光峰值和电致发光峰值分别在516和552 nm. SY PPV的器件性能为: 启动电压为2.4 V, 最大亮度大于49000 cd·m^-2, 最大流明效率为21 cd·A^-1, 显著优于采用老方法合成SY PPV的最大流明效率(16-18 cd·A^-1).     

温度敏感树形聚合物

温度敏感树形聚合物结合了温敏聚合物对温度具有响应行为的特点以及树形聚合物非线形构造的方式、大尺度、结构易于调节和功能化等特征,在智能材料和生物医药等领域有着重要的研究价值和应用前景。此类聚合物可以通过在树形聚合物表面引入温敏基元、控制聚合物结构的亲疏水比例以及采用温敏基元直接构筑聚合物等方式形成,其温敏性可以通过调控聚合物内部或外部基团的亲疏水性、树枝化基元代数、树形构造方式等得以实现与控制。此外,树形聚合物独特的拓扑结构赋予其与线形聚合物不同的温敏行为及脱水机理。本文综述了包括温敏树枝状大分子、温敏树枝化聚合物、温敏超支化聚合物等不同类型温敏树形聚合物近年来的研究进展,重点介绍这些聚合物的合成方法、温敏行为和拓扑结构对温敏行为的影响,以及在纳米材料、生物医用、分子传感器等方面的应用研究。     

Synthesis,characterization, and electrical properties of a diazodiphenylene‐bridged Cu–phthalocyanine polymer

A diazodiphenylene‐bridged Cu–phthalocyanine polymer was synthesized from the diazonium salt of bensidine and the Cu(II) 1,8,15,22‐tetraaminophthalocyanine complex and characterized with Fourier transform infrared, ultraviolet–visible spectroscopy, and elemental analysis. The polymer was partially soluble in organic solvents such as dimethylformamide and tetrahydrofuran. The molecular weight of the soluble part of the polymer was investigated with ebullioscopy and viscosimetry methods in tetrahydrofuran. Both methods showed that the molecular weight of the polymer was much larger than that of the complex. The conductivity of the samples was measured with a four‐prop conductivity measuring device. Iodine and hydrogen chloride were doped to the polymer, and an increase of about 10⁴ S cm^?1 in the electrical conductivity was observed. The cyclic voltammogram of the diazodiphenylene‐bridged Cu–phthalocyanine polymer in contact with a LiClO₄ electrolyte exhibited two reductions and two reoxidations with high reversibility and electrochemical stability. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5692–5698, 2006     

New Azo Chromophore‐Containing Conjugated Polymers: Facile Synthesis by Using “Click” Chemistry and Enhanced Nonlinear Optical Properties Through the Introduction of Suitable Isolation Groups

A new series of azobenzene‐containing polyfluorenes have been successfully prepared through polymer reactions by the utilization of “click” chemistry. All the polymers were well characterized and soluble in common solvents. By the application of the concept of “suitable isolation group”, the macroscopic nonlinear optical (NLO) properties of the polymers could be boosted to as large as three times that of the polymer without isolation moieties. Also, all the polymers were thermally stable, and demonstrated good procesability, coupled with improved optical transparency. Thus, they are good candidates for the practical applications as new photonic materials.

     

Synthesis of Glucose‐Containing Polyaniline by the Oxidative Polymerization of N‐Glucosylaniline

Summary: The oxidative polymerization of N‐glucosylaniline was carried out using ammonium persulfate as the oxidant in phosphate buffer. The structure of the isolated polymer was determined by ¹H NMR, ¹³C NMR, and UV‐vis spectroscopy to be the polyaniline having glucose residues attached to the general polyaniline unit. Participation of the ortho‐position of the aromatic ring in the polymerization was also confirmed by the analyses.

The oxidative polymerization of N‐glucosylaniline.     

Single step synthesis of poly(3‐octylthiophene)/multi‐walled carbon nanotube composites and their characterizations

The transport properties of conducting polymers are known to be greatly influenced by the chemical unsaturation surrounding the polymer backbone, besides favorable conformation of the side chains present. Polymeric composites with multi‐walled carbon nanotubes (MWNT) can provide a good conductive path at relatively low carbon contents, as these have high aspect ratio, specific surfaces and are cost effective. Hence their use in various applications such as organic LED, solar cells and supercapacitors are very much anticipated. In this respect poly(3‐octylthiophene)/MWNT composites have been prepared by an “insitu” polymerization process in chloroform medium with FeCl₃ oxidant at room temperature. The composites were characterized by Fourier Transfer Infrared spectroscopy (FT‐IR), Raman, work function and X‐ray diffraction (XRD) measurements. The results indicate only a weak π‐π interaction between the moieties, in the absence of a strong covalent bonding. The ultraviolet–visible (UV–Vis) measurements also support this view. The photoluminescence (PL) quenching indicates the effectiveness of the interface in the formation of the donor–acceptor type composite. The conductivity of the composites is followed by a four probe technique to understand the conduction mechanism. The Hall voltage measurement is followed to monitor carrier concentrations and mobilities. The impressive conductivity and mobility values encourage the utility of the composites as photovoltaic material. Copyright © 2008 John Wiley & Sons, Ltd.     

发光性液晶共轭聚合物的研究进展发光性液晶共轭聚合物的研究进展

综述了可用做发光材料的液晶共轭聚合物（LCCPs)的种类及其制备,介绍了LCCPs在制备发光器件中的取向方法,并对其光学性能进行了评述。     

Group IVB metallocene poly(ether ester) polymers containing alpha-cyano-4-hydroxycinnamic acid that act as self-matrix materials in MALDI MS

Polymers derived from reacting Group IVB metallocene dihalides and the matrix alpha-cyano-4-hydroxycinnamic acid act as their own matrix agent when performing MALDI MS. Ion fragments containing two repeat units and greater are formed. The results are similar to those obtained employing graphite as the matrix material. The advantage of employing graphite as a comparative standard is that non-interfering ion fragment clusters are not produced by graphite. This is the second report of the inclusion of alpha-cyano-4-hydroxycinnamic acid into a condensation polymer and the use of the polymer itself as a matrix material indicating that this approach can be successfully applied to other systems. The addition of graphite as a matrix material allows the mass range to increase for the reflective mode.     

Synthesis and characterization of optically active polyamides based on 2-(1,3-isoindolinedione-2-yl)glutaric acid by direct polycondensation

<正>Five new optically active polyamides(PAs) 6a-6e were prepared by direct polycondensation reaction of 2-(1,3- isoindolinedione-2-yl)-glutaric acid 4 as a new chiral diacid with various aromatic diamines 5a-5e in a medium consisting of triphenyl phosphite(TPP),calcium chloride,pyridine(Py) and N-methyl-2-pyrrolidone(NMP).The polycondensation reaction produced a series of polyamids 6a-6e in quantitative yields with inherent viscosities of 0.26-0.39 dL/g.The resulting polymers were fully characterized by means of ~1H-NMR,FT-IR spectroscopy,elemental analysis,inherent viscosity and specific rotation.Thermal properties of these polymers were investigated using thermal gravimetric analysis (TGA) and differential thermal gravimetry(DTG).Phthalimide rings as a bulky pendent group in the polymer chains disturb the interchain and intrachain interactions and make these PAs readily soluble in polar,aprotic solvents such as N,N-dimethyl acetamide(DMAc),N,N-dimethyl formamide(DMF),dimethyl sulfoxide(DMSO),N-methyl-2-pyrrolidone(NMP) and sulfuric acid.     

One‐step synthesis of ladder‐type fused poly(benzopentalene) derivatives with tunable energy levels by variable substituents

Novel ladder‐type conjugated polymers, fused poly (benzopentalene) derivatives, were synthesized from the readily accessible 1,4‐dibromo‐2,5‐diethynylbenzene derivatives by the Pd‐catalyzed self‐polycondensation in one‐step with high yields. The low solubility of the ladder structure was suggested when the triisopropylsilyl substituents were selected. However, when longer alkyl chains were introduced into the peripheral moieties, such as the dialkylanilino (DAA) and alkyloxyphenyl groups, a high solubility was achieved and the number‐average molecular weight (M_n) reached 18,000. The UV‐Vis absorption spectral shapes of the polymers were similar to the reported dibenzopentalene derivatives, except for the bathochromically shifted end absorptions. This result suggests an extension of the π‐conjugated systems due to the polymerization. Moreover, the almost defect‐free structure of the ladder‐type polymers was confirmed by the quantitative tetracyanoethylene (TCNE) addition to the DAA‐activated alkynes. The titration experiments of TCNE to the polymers revealed the number of terminal alkynes, which enabled us to calculate the molecular weight of the polymers. The calculated molecular weight was consistent with that determined by GPC. After the TCNE addition, the polymer band gaps reasonably decreased as suggested by the UV‐Vis‐NIR absorption and electrochemical measurements. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of two classes of hyperstar polymers bearing hyperbranched cores grafted with linear arms

New hyperstar polymers (HSP) consisting of two different hyperbranched (hb) aromatic/aliphatic cores grafted with linear polymer arms were successfully synthesized. The hb cores were based on either hb poly(vinylbenzylchloride) synthesized by SCVP‐ATRP or hb polyester from a polycondensation reaction. For the core‐first approach, the hb cores have been modified to hb macroinitiators initiating either the cationic ring‐opening polymerization of oxazolines (Oxa) or the atom transfer radical polymerization of alkylmethacrylates. For potential use as reactive binders in epoxy coatings the HSPs were equipped with a defined amount of OH‐groups during arm growth via controlled block‐copolymerization with nonfunctionalized and OH‐functionalized monomers, either an oxazoline (OH)Oxa (2‐[1‐(hydroxymethyl)ethyl]‐oxazoline) or a methacrylate HEMA (2‐hydroxyethyl methacrylate). The amount of OH‐groups could be well adjusted in this way. The hyperstars were comprehensively characterized with respect to chemical structure and molecule dimension. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012