Fabrication of NiC/MoC/NiMoO4 Heterostructured Nanorod Arrays as Stable Bifunctional Electrocatalysts for Efficient Overall Water Splitting

Developing noble‐metal‐free, earth‐abundant, highly active, and stable electrocatalysts with high efficiency for both hydrogen and oxygen evolution reactions is of great importance for the development of overall water‐splitting devices, but still remains a challenging issue. Herein, a 3D heterostructured NiC/MoC/NiMoO₄ electrocatalyst was prepared through a facile synthetic procedure. The electrocatalyst shows a superior catalytic activity and stability toward the hydrogen and oxygen evolution reactions. The optimized NiC/MoC/NiMoO₄ catalyst presents low overpotentials of 68 and 280 mV to reach a current density of 10 mA cm^?2 in 1.0 m KOH for the hydrogen and oxygen evolution reactions, respectively. Assembled as an electrolyzer for overall water splitting, such a heterostructure shows quite a low cell voltage of 1.52 V at 10 mA cm^?2 and remarkable stability for more than 20 h. This work provides a facile but efficient approach for the design and preparation of highly efficient bifunctional and self‐supported heterostructured electrocatalysts that can serve as promising candidates in electrochemical energy storage and conversion.     

Nanostructured NiMoO4 as active electrocatalyst for oxygen evolution

Hydrothermally synthesized NiMoO₄ nanorods exhibit considerable electrocatalytic properties for the oxygen evolution in alkaline condition. The performance enhancement of ternary NiMoO₄ over binary oxide NiO and MoO₃ is attributed to the inclusion of Mo that promotes the pre-redox reaction of Ni to form active Ni species.     

Three‐Dimensional NiMoO4 Nanosheets Supported on a Carbon Fibers@Pre‐Treated Ni Foam (CF@PNF) Substrate as Advanced Electrodes for Asymmetric Supercapacitors

Herein, we report a nanoarchitectured nickel molybdate/carbon fibers@pre‐treated Ni foam (NiMoO₄/CF@PNF) electrode for supercapacitors. The synthesis of NiMoO₄/CF@PNF mainly consists of a direct chemical vapor deposition (CVD) growth of dense carbon fibers (CFs) onto pre‐treated Ni foam (PNF) as the substrate, followed by in situ growth of NiMoO₄ nanosheets (NSs) on the CF@PNF substrate by means of a hydrothermal process. The NiMoO₄/CF@PNF electrode exhibits a high areal capacitance (5.14 F cm^?2 at 4 mA cm^?2) and excellent cycling stability (97 % capacitance retention after 2000 cycles at 10 mA cm^?2). Furthermore, we have successfully assembled NiMoO₄ NSs//activated carbon (AC) asymmetric supercapacitors, which can achieve an energy density of 45.6 Wh kg^?1 at 674 W kg^?1, and excellent stability with 93 % capacitance retention after 2000 cycles at 5 mA cm^?2. These superior properties hold great promise for energy‐storage applications.     

Facile synthesis of NiCo2O4 nanorods for electrocatalytic oxidation of methanol

Fuel cell performance largely relies on the activity of catalyst; hence development of high performance electrocatalysts for the electrooxidation of methanol is highly essential for the further development in fuel cell technology. Herein, we demonstrate a facile hydrothermal approach for the growth of NiCo₂O₄ nanorods and their application in the methanol electrooxidation. The morphology and surface area investigation reveal the growth of NiCo₂O₄ nanorods with an average length of 500 nm and a specific surface area of 123 m²/g, respectively. The NiCo₂O₄ nanorods displayed a larger electrochemical activity towards the electrooxidation of methanol in alkaline pH than the quasi-spherical NiCo₂O₄ nanoparticles. On the NiCo₂O₄ nanorod based electrode a higher catalytic current density of 129 mA/cm² and a high stability with 86% current retention was achieved, signifying that the current non-Pt based catalyst could be a non-expensive alternative candidate for high performance fuel cell application.     

Iron-Doped Nickel Molybdate with Enhanced Oxygen Evolution Kinetics

Electrochemical water splitting is one of the potential approaches for making renewable energy production and storage viable. The oxygen evolution reaction (OER), as a sluggish four-electron electrochemical reaction, has to overcome high overpotential to accomplish overall water splitting. Therefore, developing low-cost and highly active OER catalysts is the key for achieving efficient and economical water electrolysis. In this work, Fe-doped NiMoO₄ was synthesized and evaluated as the OER catalyst in alkaline medium. Fe³⁺ doping helps to regulate the electronic structure of Ni centers in NiMoO₄, which consequently promotes the catalytic activity of NiMoO₄. The overpotential to reach a current density of 10 mA cm⁻² is 299 mV in 1 m KOH for the optimal Ni_0.9Fe_0.1MoO₄, which is 65 mV lower than that for NiMoO₄. Further, the catalyst also shows exceptional performance stability during a 2 h chronopotentiometry testing. Moreover, the real catalytically active center of Ni_0.9Fe_0.1MoO₄ is also unraveled based on the ex situ characterizations. These results provide new alternatives for precious-metal-free catalysts for alkaline OER and also expand the Fe-doping-induced synergistic effect towards performance enhancement to new catalyst systems.     

Controlled Synthesis of 3D Flower‐like Ni2P Composed of Mesoporous Nanoplates for Overall Water Splitting

Developing efficient non‐noble metal and earth‐abundant electrocatalysts with tunable microstructures for overall water splitting is critical to promote clean energy technologies for a hydrogen economy. Herein, novel three‐dimensional (3D) flower‐like Ni₂P composed of mesoporous nanoplates with controllable morphology and high surface area was prepared by a hydrothermal method and low‐temperature phosphidation as efficient electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Compared with the urchin‐like Ni_x P_y , the 3D flower‐like Ni₂P with a diameter of 5 μm presented an efficient and stable catalytic performance in 0.5 m H₂SO₄, with a small Tafel slope of 79 mV dec⁻¹ and an overpotential of about 240 mV at a current density of 10 mA cm⁻² with a mass loading density of 0.283 mg cm⁻². In addition, the catalyst also exhibited a remarkable performance for the OER in 1.0 m KOH electrolyte, with an overpotential of 320 mV to reach a current density of 10 mA cm⁻² and a small Tafel slope of 72 mV dec⁻¹. The excellent catalytic performance of the as‐prepared Ni₂P may be ascribed to its novel 3D morphology with unique mesoporous structure.     

Strong‐Coupled Cobalt Borate Nanosheets/Graphene Hybrid as Electrocatalyst for Water Oxidation Under Both Alkaline and Neutral Conditions

Developing highly active catalysts for the oxygen evolution reaction (OER) is of paramount importance for designing various renewable energy storage and conversion devices. Herein, we report the synthesis of a category of Co‐Pi analogue, namely cobalt‐based borate (Co‐B_i) ultrathin nanosheets/graphene hybrid by a room‐temperature synthesis approach. Benefiting from the high surface active sites exposure yield, enhanced electron transfer capacity, and strong synergetic coupled effect, this Co‐B_i NS/G hybrid shows high catalytic activity with current density of 10 mA cm^?2 at overpotential of 290 mV and Tafel slope of 53 mV dec^?1 in alkaline medium. Moreover, Co‐B_i NS/G electrocatalysts also exhibit promising performance under neutral conditions, with a low onset potential of 235 mV and high current density of 14.4 mA cm^?2 at 1.8 V, which is the best OER performance among well‐developed Co‐based OER electrocatalysts to date. Our finding paves a way to develop highly active OER electrocatalysts.     

CoFe-LDH nanowire arrays on graphite felt: A high-performance oxygen evolution electrocatalyst in alkaline media

Developing non-noble-metal oxygen evolution reaction(OER) electrocatalysts with high performance is critical to electrocatalytic water splitting. In this work, we fabricated Co Fe-layered double hydroxide(LDH) nanowire arrays on graphite felt(Co Fe-LDH/GF) via a hydrothermal method. The Co Fe-LDH/GF, as a robust integrated 3 D OER anode, exhibits excellent catalytic activity with the need of low overpotential of 252 and 285 m V to drive current densities of 10 and 100 m A/cm2 in 1.0 mol/L KOH, r...     

Amorphous FeCoNi-S as efficient bifunctional electrocatalysts for overall water splitting reaction

Developing bifunctional electrocatalysts for overall water splitting reaction is still highly desired but with large challenges. Herein, an amorphous FeCoNi-S electrocatalyst was developed using thioacetamide for the sulfuration of FeCoNi hydroxide during the hydrothermal process. The obtained catalyst exhibited an amorphous structure with hybrid bonds of metal-S bond and metal-O bonds in the catalyst system. The optimized catalyst showed a largely improved bifunctional catalytic ability to drive water splitting reaction in the alkaline electrolyte compared to the FeCoNi hydroxide. It required an overpotential of 280 mV and 80 mV (No-IR correction) to offer 10 mA/cm² for water oxidation and reduction respectively; a low cell voltage of 1.55 V was required to reach 10 mA/cm² for the water electrolysis with good stability for 12 h. Moreover, this catalyst system showed high catalytic stability, catalytic kinetics, and Faraday efficiency for water splitting reactions. Considering the very low intrinsic activity of FeCoNi hydroxide, the efficient bifunctional catalytic ability should result from the newly formed hybrid active sites of metallic metal-S species and the high valence state of metal oxide species. This work is effective in the bifunctional catalytic ability boosting for the transition metal materials by facile sulfuration in the hydrothermal approach.     

Hierarchical Tubular Architecture Constructed by Vertically Aligned CoS2-MoS2 Nanosheets for Hydrogen Evolution Electrocatalysis

Developing efficient electrocatalysts for the hydrogen evolution reaction (HER) is crucial for establishing a sustainable and environmentally friendly energy system, but it is still a challenging issue. Herein, hierarchical tubular-structured CoS₂-MoS₂/C as efficient electrocatalysts are fabricated through a unique metal–organic framework (MOF) mediated self-sacrificial templating. Core–shell structured MoO₃@ZIF-67 nanorods are used both as a precursor and a sacrificial template to form the one-dimensional tubular heterostructure where vertically aligned two-dimensional CoS₂-MoS₂ nanosheets are formed on the MOF-derived carbon tube. Trace amounts of noble metals (Pd, Rh, and Ru) are successfully introduced to enhance the electrocatalytic property of the CoS₂-MoS₂/C nanocomposites. The as-synthesized hierarchical tubular heterostructures exhibit excellent HER catalytic performance owing to the merits of the hierarchical hollow architecture with abundantly exposed edges and the uniformly dispersed active sites. Impressively, the optimal Pd-CoS₂-MoS₂/C-600 catalyst delivers a current density of 10 mA cm⁻² at a low overpotential of 144 mV and a small Tafel slope of 59.9 mV/dec in 0.5 m H₂SO₄. Overall, this MOF-mediated strategy can be extended to the rational design and synthesis of other hollow heterogeneous catalysts for scalable hydrogen generation.     

A Hybrid Co Quaterpyridine Complex/Carbon Nanotube Catalytic Material for CO2 Reduction in Water

Associating a metal‐based catalyst to a carbon‐based nanomaterial is a promising approach for the production of solar fuels from CO₂. Upon appending a Co^II quaterpyridine complex [Co(qpy)]²⁺ at the surface of multi‐walled carbon nanotubes, CO₂ conversion into CO was realized in water at pH 7.3 with 100 % catalytic selectivity and 100 % Faradaic efficiency, at low catalyst loading and reduced overpotential. A current density of 0.94 mA cm^?2 was reached at ?0.35 V vs. RHE (240 mV overpotential), and 9.3 mA cm^?2 could be sustained for hours at only 340 mV overpotential with excellent catalyst stability (89 095 catalytic cycles in 4.5 h), while 19.9 mA cm^?2 was met at 440 mV overpotential. Such a hybrid material combines the high selectivity of a homogeneous molecular catalyst to the robustness of a heterogeneous material. Catalytic performances compare well with those of noble‐metal‐based nano‐electrocatalysts and atomically dispersed metal atoms in carbon matrices.     

Interfacial coupling of sea urchin-like (Mo4O11-MoS2-VO2) promoted electron redistributions for significantly boosted hydrogen evolution reaction

Developing efficient electrocatalysts for hydrogen evolution reaction (HER) is of great importance in contemporary water electrolysis technology. Here, a novel hierarchically sea urchin-like electrocatalyst (Mo₄O₁₁-MoS₂-VO₂) is synthesized by hydrothermal deposition and post-annealing strategy. The optimized electrocatalyst behaves as a high active hydrogen evolution electrode in 0.5 mol/L H₂SO₄. This electrode needs overpotential of only 43 mV to achieve 10 mA/cm² with a Tafel slope of 37 mV/dec and maintains its catalytic activity for at least 36 h. Better than most previously reported non-noble metal electrocatalysts anchored on carbon cloth. It is worth mentioning that the hierarchical sea urchin-like structure promotes the redistribution of electrons and provides more catalytic active sites. This strategy shows a way for the construction of inexpensive non-noble metal electrocatalysts in the future.     

Controlled Synthesis of Ni-Doped MoS2 Hybrid Electrode for Synergistically Enhanced Water-Splitting Process

The development of high-efficiency, low-cost, and earth-abundant electrocatalysts for overall water splitting remains a challenge. In this work, Ni-modified MoS₂ hybrid catalysts are grown on carbon cloth (Ni-Mo-S@CC) through a one-step hydrothermal treatment. The optimized Ni-Mo-S@CC catalyst shows excellent hydrogen evolution reaction (HER) activity with a low overpotential of 168 mV at a current density of 10 mA cm⁻² in 1.0 m KOH, which is lower than those of Ni-Mo-S@CC (1:1), Ni-Mo-S@CC (3:1), and pure MoS₂. Significantly, the Ni-Mo-S@CC hybrid catalyst also displays outstanding oxygen evolution reaction (OER) activity with a low overpotential of 320 mV at a current density of 10 mA cm⁻², and remarkable long-term stability for 30 h at a constant current density of 10 mA cm⁻². Experimental results and theoretical analysis based on density functional theory demonstrate that the excellent electrocatalytic performance can be attributed mainly to the remarkable conductivity, abundant active sites, and synergistic effect of the Ni-doped MoS₂. This work sheds light on a unique strategy for the design of high-performance and stable electrocatalysts for water-splitting electrolyzers.     

Random Occupation of Multimetal Sites in Transition Metal-Organic Frameworks for Boosting the Oxygen Evolution Reaction

Developing robust oxygen evolution reaction (OER) electrocatalysts with excellent performance is essential for the conversion of renewable electricity to clean fuel. Herein, we present a facile concept for the synthesis of efficient high-entropy metal-organic frameworks (HEMOFs) as electrocatalysts in a one-step solvothermal synthesis. This strategy allows control of the microstructure and corresponding lattice distortion by tuning the metal ion composition. As a result, the OER activity was improved by optimizing the coordination environment of the metal catalytic center. The optimized Co-rich HEMOFs exhibited a low overpotential of 310 mV at a current density of 10 mA cm⁻², better than a RuO₂ catalyst tested under the same conditions. The finding of lattice distortion of the HEMOFs provides a new strategy for developing high-performance electrocatalysts for energy conversion.     

In-Situ Generated Trimetallic Molybdate Nanoflowers on Ni Foam Assisted with Microwave for Highly Enhanced Oxygen Evolution Reaction

Oxygen evolution reaction (OER) is considered as a critical half-cell reaction of water splitting, the kinetics of which is sluggish even not favored, thus requiring highly active electrocatalysts to shrink the reaction energy barrier and improve the energy conversion efficiency. In this study, In-situ generated trimetallic molybdate nanoflowers on Ni foam by a straightforward and time-saving solvothermal method assisted with microwave, not only bring synergistic effect into full play between multiple metals, but also construct a well-defined nanoflower-like structure accompanied by larger specific area (273.3 m² g⁻¹) and smaller size than the pristine NiMoO₄. The resulting Ni_0.9Al_0.1MoO₄-NF requires a relatively low overpotential of 266 mV for OER at 10 mA cm⁻², which outperforms commercial RuO₂ catalysts (274 mV). Such excellent performance compares favorably to most previously reported NiMoO₄-based electrocatalysts for OER. This work not only supplies a facile method to construct a well-defined nanoflower-like structure on foam, but also broadens our horizons into the mechanism of OER in alkaline conditions.     

Carbon Nanotubes Decorated with CoP Nanocrystals: A Highly Active Non‐Noble‐Metal Nanohybrid Electrocatalyst for Hydrogen Evolution

The development of effective and inexpensive hydrogen evolution reaction (HER) electrocatalysts for future renewable energy systems is highly desired. The strongly acidic conditions in proton exchange membranes create a need for acid‐stable HER catalysts. A nanohybrid that consists of carbon nanotubes decorated with CoP nanocrystals (CoP/CNT) was prepared by the low‐temperature phosphidation of a Co₃O₄/CNT precursor. As a novel non‐noble‐metal HER catalyst operating in acidic electrolytes, the nanohybrid exhibits an onset overpotential of as low as 40 mV, a Tafel slope of 54 mV dec^?1, an exchange current density of 0.13 mA cm^?2, and a Faradaic efficiency of nearly 100 %. This catalyst maintains its catalytic activity for at least 18 hours and only requires overpotentials of 70 and 122 mV to attain current densities of 2 and 10 mA cm^?2, respectively.     

Hollow Nanotube Ru/Cu2+1O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm⁻² in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm⁻² in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm⁻², which is much lower than the benchmark of IrO₂(+)/Pt(−) counterpart (1.64 V at 10 mA cm⁻²). The excellent performance of the Ru/Cu₂₊₁O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.     

Flower-like NiCo2S4/NiFeP/NF composite material as an effective electrocatalyst with high overall water splitting performance

Rational design and building of high efficiency, secure and inexpensive electrocatalyst is a pressing demand and performance to promote sustainable improvement of hydrogen energy. The bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution response (HER) with high catalytic performance and steadiness in the equal electrolyte are extra treasured and meaningful. Herein, a unique three-dimensional (3D) structure electrocatalyst for NiCo₂S₄ growing on the flower-like NiFeP was designed and synthesized in this study. The results show that the flower-like NiCo₂S₄/NiFeP/NF composite electrocatalyst has large specific surface area, appropriate electrical conductivity, and greater lively websites uncovered in the three-dimensional structure, and affords extraordinary electrocatalytic overall performance for the ordinary water splitting. In alkaline solution, the OER and HER overpotentials of NiCo₂S₄/NiFeP/NF only need 293 mV and 205 mV overpotential to provide the current densities of 100 mA/cm² and 50 mA/cm², respectively. This high electrocatalytic activity exceeds the catalytic activity of most nickel-iron based electrocatalysts for OER and HER process. Accordingly, the optimized NiCo₂S₄/NiFeP/NF sample has higher stability (24 h) at 1.560 and 10 mA/cm², which extensively speeds up the overall water splitting process. In view of the above performance, this work offers a fine approach for the further improvement of low fee and excessive effectivity electrocatalyst.     

Proton-induced fast preparation of size-controllable MoS_2 nanocatalyst towards highly efficient water electrolysis

MoS_2 has emerged for catalyzing the hydrogen evolution reaction.Various notable strategies have been developed to downsize the MoS_2 particles and expose more active edges.However,the restacking issue,which reduces the exposure degree,has rarely been taken into account.Herein,we report on a facile proton-induced fast hydrothermal approach to produce size-controllable MoS_2 nanocatalysts and demonstrate that along the varying of sheet sizes,there is a trade-off between the intrinsic catalytic activity(mainly determined by the unsaturated sulfur on the sheet edges) and the active edge accessibility(influenced by the assembly structure).The size-optimized catalyst delivers a high performance of a low overpotential of～200 mV at 10 mA/cm2,a Tafel slope of 46.3 mV/dec,and a stable working state,which is comparable to the recent notable works.Our findings will provide a pathway for its large-scale application and enhance the water electrolysis performance.     

A Solution‐based Method for Synthesizing Pyrite‐type Ferrous Metal Sulfide Microspheres with Efficient OER Activity

Simple and stable synthesis of transition metal sulfides and clarification of their growth mechanisms are of great importance for developing catalysts, metal‐air batteries and other technologies. In this work, we developed a one‐step facile hydrothermal approach to successfully synthesize NiS₂ microspheres. By changing the experimental parameters, the reason that affects the formation of nanostructured spheres is investigated and discussed in detail, and the formation mechanism of microspheres is proposed innovatively. Furthermore, electrochemical testing results show that the 7 h‐NiS₂ catalyst exhibits a remarkable oxygen evolution reaction (OER) activity with an overpotential of 311 mV at 10 mA cm^?2 in 1.0 M KOH, superior to precious metal RuO₂. The NiS₂ catalyst also exhibits a robust durability. This work will contributes to the rational design and the understanding of growth mechanism of transition metal chalcogenide electrocatalysts for diverse energy conversion technologies.