Synthesis of face-centered tetragonal FePt nanoparticles and granular films from Pt@Fe2O3 core-shell nanoparticles

This paper describes a new approach for making face-centered tetragonal (fct) FePt nanoparticles with a diameter of 17 nm and granular films from Pt@Fe2O3 core-shell nanoparticle precursors. The core-shell nanoparticles were converted to fct FePt through a reduction and alloy formation process at enhanced temperatures. The Fe and Pt elemental analysis was conducted on both individual nanoparticles and granular films using energy-dispersive X-ray (EDX) spectroscopy. Our convergent evidence from selected area electron diffraction (SAED), powder X-ray diffraction (PXRD), and EDX analysis indicates that the final products are fct FePt alloys. The fct FePt films have coercivities of 8.0-9.1 kOe at 5 K and 7.0 kOe at 300 K measured by a SQUID magnetometer. These values depend on the conversion temperatures of Pt@Fe2O3 nanoparticles. Unlike the previously synthesized disordered face-centered cubic (fcc) FePt nanoparticles with diameters of 4-6 nm (Sun, S. H.; Murray, C. B.; Weller, D.; Folks, L.; Moser, A. Science 2000, 287, 1989), the FePt nanoparticles presented in this work not only possess the preferred fct phase but also are in a size range that is expected to be ferromagnetic and have high coercivity, which is important to the practical applications in ultrahigh density data storage media and magnetic nano devices.     

Au nanoparticle monolayers covered with sol-gel oxide thin films: optical and morphological study

In this work, we provide a detailed study of the influence of thermal annealing on submonolayer Au nanoparticle deposited on functionalized surfaces as standalone films and those that are coated with sol-gel NiO and TiO(2) thin films. The systems are characterized through the use of UV-vis absorption, X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), and spectroscopic ellipsometry. The surface plasmon resonance peak of the Au nanoparticles was found to red-shift and increase in intensity with increasing surface coverage, an observation that is directly correlated to the complex refractive index properties of Au nanoparticle layers. The standalone Au nanoparticles sinter at 200 °C, and a relationship between the optical properties and the annealing temperature is presented. When overcoated with sol-gel metal oxide films (NiO, TiO(2)), the optical properties of the Au nanoparticles are strongly affected by the metal oxide, resulting in an intense red shift and broadening of the plasmon band; moreover, the temperature-driven sintering is strongly limited by the metal oxide layer. Optical sensing tests for ethanol vapor are presented as one possible application, showing reversible sensing dynamics and confirming the effect of Au nanoparticles in increasing the sensitivity and in providing a wavelength dependent response, thus confirming the potential use of such materials as optical probes.     

Charge separation and surface reconstruction: a Mn2+ doping study

Hydrothermal synthesis of Mn doped anatase (TiO2) nanoparticles using scrolled nanotubes of TiO2 and MnCl2 as the starting materials is described. Incorporation of Mn2+ ions on the substitutional sites was confirmed using X-ray absorption fine structure (FT-XAFS) while the oxidation state Mn(II) and coordination environment were determined using both electron paramagnetic resonance (EPR) and X-ray absorption near edge spectroscopy (XANES). Two different hyperfine couplings of 96 and 86 G were found using high-field (130 GHz) EPR reporting that Mn atoms occupy two distinct sites: one undercoordinated (reconstructed surface) and the other octahedral crystalline geometry (nanoparticle core), respectively. It was found that Mn atoms that occupy surface layers are weakly bound to the anatase lattice and can be easily leached using simple dialysis, while those incorporated in the nanoparticle core are bound more strongly and cannot be removed by dialysis. Light excitation EPR reveals that Mn ions incorporated in the surface layers participate in the charge separation, while those trapped deeply in the nanoparticle core do not show any photoactivity. Doping of the core of nanoparticles with Mn2+ ions, on the other hand, enables synthesis of optically transparent films having superparamagnetic behavior at room temperatures with a saturation magnetic moment of 1.23 microB per Mn atom.     

Control of TiO2 structures from robust hollow microspheres to highly dispersible nanoparticles in a tetrabutylammonium hydroxide solution

A new process for controlling the structure of TiO2 from hollow microspheres to highly dispersible nanoparticles has been developed by altering the concentration of tetrabutylammonium hydroxide (TBAH) in the solvothermal reaction of titanium isopropoxide. Robust and size-controllable hollow TiO2 microspheres, constructed by the assembly of 18 nm TiO2 nanoparticles, were synthesized at relatively high TBAH concentration. The diameters of hollow spheres, with a shell thickness of approximately 250 nm, were controlled to 1.5-4 microm by varying the concentration of TBAH in the range of 0.1-0.5 M. After calcination at 450 degrees C, the hollow microspheres were not appreciably deformed and were still floating on the surface of the water. However, highly dispersible TiO2 nanoparticles with an average diameter of 13 nm were obtained at a low TBAH concentration such as 9.2 mM. The colloidal particle size of TiO2 in an aqueous suspension at pH 2 was 12.5-13.5 nm, which indicates that the each nanoparticle is completely separated. The overall procedure is simple and highly reproducible, and large-scale synthesis is available at low cost.     

Synthesis of a hierarchical three-component nanocomposite structure system with enhanced electrocatalytic and photoelectrical properties

Effective control over the morphology and size of Pd/Pt nanoparticles is currently of immense interest because their electronic, optical, and catalytic properties are superior to pure platinum nanoparticles. However, control over the nanoparticle shape is still challenging. Therefore, a novel design and synthetic route needs to be developed to obtain a high-performance catalyst. Herein, a hierarchical three-component nanocomposite structure system (HTNSS) composed of graphene, TiO(2), and Pd@Pt core-shell nanoparticles was designed and synthesized by a sequential strategy that focuses on constructing the monolithic structure rather than limited single-component counterparts. The resulting composites were characterized by various techniques, which showed that the Pd@Pt core-shell nanoparticles were preferentially deposited on the peripheral interface of the graphene and TiO(2) nanoparticles. The photoelectrical and catalytic performances were obviously improved relative to the commercially available E-TEK Pt/C owing to their synergistic effect.     

由铜-胺氧化还原引发反应一步法简便制备TiO_2表面接枝聚甲基丙烯酸甲酯纳米杂化粒子

提出并验证了一种通过普通自由基聚合在纳米TiO2表面接枝聚甲基丙烯酸甲酯的简单方法.通过在纳米TiO2粒子表面引入伯胺分子层(纳米TiO2-NH2粒子),利用Cu2+-胺氧化还原体系实现了CuSO4催化纳米TiO2-NH2粒子表面引发甲基丙烯酸甲酯(MMA)的自由基接枝聚合,从而一步得到表面固定有聚甲基丙烯酸甲酯链的纳米TiO2杂化粒子(纳米TiO2-PMMA杂化粒子).红外光谱、热失重分析与电镜的结果都表明PMMA已经被接枝到纳米TiO2粒子表面,且接枝率随着聚合时间的延长而逐渐增大,PMMA链的引入有助于降低纳米TiO2粒子微球的团聚程度、增强与有机溶剂分子的范德华力,从而提高分散稳定性.反应溶液中没有游离均聚物形成.     

ZnO/TiO2纳米管复合材料的制备及光电化学性能研究

采用电化学阳极氧化法制备TiO2纳米管,然后用光化学沉积法在TiO2纳米管表面沉积ZnO纳米颗粒制备ZnO/TiO2纳米复合材料。对样品进行了Raman谱、XRD和SEM表征,通过测定光电流-时间(I-t)和开路电压-时间(OCPT)曲线对ZnO/TiO2纳米复合材料的光电化学性能进行研究。结果表明,沉积ZnO没有改变TiO2的相结构;复合ZnO提高了TiO2的光电性能;在Zn(NO3)2浓度为10-3 mol.L-1的条件下制得的ZnO/TiO2纳米复合材料具有较好的光电性能。     

Atomic layer deposition in nanometer-level replication of cellulosic substances and preparation of photocatalytic TiO2/cellulose composites

TiO2 replicas of filter paper with nanometer-level accuracy were prepared by atomic layer deposition of thin conformal TiO2 coating, followed by a removal of the paper by air-anneal at 450 degrees C. Photocatalytic anatase TiO2/cellulose composites were also made by leaving the paper intact. The TiO2 films were deposited from Ti(OMe)4 and H2O at 150-250 degrees C. The photocatalytic activity of the TiO2/cellulose composite was verified by photocatalytic reduction of Ag(I) from an aqueous solution to Ag nanoparticles on the TiO2 surface. The TiO2/cellulose composites are mechanically more stable than the free-standing TiO2 replicas and are therefore potentially suitable as lightweight, high surface area photocatalysts.     

Synthesis of titanium dioxide nanoparticles with mesoporous anatase wall and high photocatalytic activity

Mesoporous titanium dioxide nanosized powder with high specific surface area and anatase wall was synthesized via hydrothermal process by using cetyltrimethylammonium bromide (CTAB) as surfactant-directing agent and pore-forming agent. The resulting materials were characterized by XRD, nitrogen adsorption, FESEM, TEM, and FT-IR spectroscopy. The as-synthesized mesoporous TiO2 nanoparticles have mean diameter of 17.6 nm with mean pore size of 2.1 nm. The specific surface area of the as-synthesized mesoporous nanosized TiO2 exceeded 430 m2/g and that of the samples after calcination at 600 degrees C still have 221.9 m2/g. The mesoporous TiO2 nanoparticles show significant activities on the oxidation of Rhodamine B (RB). The large surface area, small crystalline size, and well-crystallized anatase mesostructure can explain the high photocatalytic activity of mesoporous TiO2 nanoparticles calcined at 400 degrees C.     

A core-shell nanoparticle approach to photoreversible fluorescence modulation of a hydrophobic dye in aqueous media

Amphiphilic core-shell nanoparticles containing spiropyran moieties have been prepared in aqueous media. The nanoparticles consist of hydrophilic and biocompatible poly(ethyleneimine) (PEI) chain segments, which serve as the shell, and a hydrophobic copolymer of methyl methacrylate (MMA), a spiropyran-linked methacrylate, and a cross-linker, which forms the core of the nanoparticles. A hydrophobic fluorescent dye based on the nitrobenzoxadiazolyl (NBD) group was introduced into the nanoparticles to form NBD-nanoparticle complexes in water. The nanoparticles not only greatly enhance the fluorescence emission of the hydrophobic dye NBD in aqueous media, probably by accommodating the dye molecules in the interface between the hydrophilic shells and the hydrophobic cores, but also modulate the fluorescence of the dye through intraparticle energy transfer. This biocompatible and photoresponsive nanoparticle complex may find applications in biological areas such as biological diagnosis, imaging, and detection. In addition, this nanoparticle approach will open up possibilities for the fluorescence modulation of other hydrophobic fluorophores in aqueous media.     

Preparation of siloxy focal dendron-protected TiO2 nanoparticles and their photocatalysis

TiO2 nanoparticles were synthesized at approximately 0 degrees C by hydrolyzing [(CH3)2CHO]4Ti in 1-propanol solutions of poly(amido amine) dendrons with a siloxy focal point and long alkyl chain spacers. Transmission electron microscopic photographs showed that TiO2 nanoparticle was 1-5 nm in size and protected by dendrons, when prepared at a mixing ratio 1:10 of Ti ion and dendron. At higher contents of Ti ion, TiO2 nanoparticles aggregated up to a maximum size of 90 nm, depending on the dendron generation (first to third). It was confirmed from X-ray photoelectron spectroscopy that Si-O-Ti covalent bond was formed in dendron-protected TiO2 nanoparticles. The ability of dendron-protected TiO2 nanoparticles as a photocatalyst for the photodegradation of 2,4-dichlorophenoxyacetic acid was higher than that of nonprotected nanoparticle and superior at higher generation. It was suggested that the dendrons protecting TiO2 nanoparticle have enough void volume to conserve guest molecules and behave effectively as a reservoir of guest molecules.     

New Cu-based catalysts supported on TiO2 films for Ullmann S(N)Ar-type C-O coupling reactions

New routes for the preparation of highly active TiO(2)-supported Cu and CuZn catalysts have been developed for C-O coupling reactions. Slurries of a titania precursor were dip-coated onto glass beads to obtain either structured mesoporous or non-porous titania thin films. The Cu and CuZn nanoparticles, synthesized using a reduction by solvent method, were deposited onto calcined films to obtain a Cu loading of 2 wt%. The catalysts were characterized by inductively coupled plasma (ICP) spectroscopy, temperature-programmed oxidation/reduction (TPO/TPR) techniques, (63)Cu nuclear magnetic resonance (NMR) spectroscopy, X-ray diffraction (XRD), scanning and transmission electron microscopy (S/TEM-EDX) and X-ray photo-electron spectroscopy (XPS). The activity and stability of the catalysts obtained have been studied in the C-O Ullmann coupling of 4-chloropyridine and potassium phenolate. The titania-supported nanoparticles retained catalyst activity for up to 12 h. However, catalyst deactivation was observed for longer operation times due to oxidation of the Cu nanoparticles. The oxidation rate could be significantly reduced over the CuZn/TiO(2) catalytic films due to the presence of Zn. The 4-phenoxypyridine yield was 64% on the Cu/nonporous TiO(2) at 120 °C. The highest product yield of 84% was obtained on the Cu/mesoporous TiO(2) at 140 °C, corresponding to an initial reaction rate of 104 mmol g(cat) (-1) s(-1). The activation energy on the Cu/mesoporous TiO(2) catalyst was found to be (144±5) kJ mol(-1), which is close to the value obtained for the reaction over unsupported CuZn nanoparticles (123±3 kJ mol(-1)) and almost twice the value observed over the catalysts deposited onto the non-porous TiO(2) support (75±2 kJ mol(-1)).     

Ultrathin films of tetrasulfonated copper phthalocyanine-capped titanium dioxide nanoparticles: fabrication, characterization, and photovoltaic effect

Tetrasulfonated copper phthalocyanine (CuTsPc)-capped TiO2 nanoparticle ultrathin films were fabricated by a layer-by-layer (LBL) self-assembly technique. Alternating bilayer structures were formed by consecutive adsorption of CuTsPc-capped TiO2 nanoparticles with poly(diallyldimethylammonium chloride). Optical and electrical measurements were carried out to characterize the CuTsPc-capped TiO2 nanoparticle ultrathin films. Optical measurements revealed uniform deposition. The surface morphology of such bilayer films showed a granular morphology similar to other classes of LBL films. Electrical measurements revealed an abnormal phenomenon under white light illumination. Electrochemical and photoelectrochemical measurements on such a bilayer system were carried out to elucidate the electron transport processes and the photovoltaic effect.     

Protein adsorption on nanoporous TiO2 films: a novel approach to studying photoinduced protein/electrode transfer reactions

We have investigated the use of nanoporous TiO2 films as substrates for protein immobilisation. Such films are of interest due to their high surface area, optical transparency, electrochemical activity and ease of fabrication. These films moreover allow detailed spectroscopic study of protein/electrode electron transfer processes. We find that protein immobilisation on such films may be readily achieved from aqueous solutions at 4 degrees C with a high binding stability and no detectable protein denaturation. The nanoporous structure of the film greatly enhances the active surface area available for protein binding (by a factor of up to 850 for an 8 microns thick film). We demonstrate that the redox state of proteins such as immobilised cytochrome-c (Cyt-c) and haemoglobin (Hb) may be modulated by the application of an electrical bias potential to the TiO2 film, without the addition of electron transfer mediators. The binding of Cyt-c on the TiO2 films is investigated as a function of film thickness, protein concentration, protein surface charge and ionic strength. We demonstrate the potential use of immobilised Hb on such TiO2 films for the detection of dissolved CO in aqueous solutions. We further show that protein/electrode electron transfer may be initiated by UV bandgap excitation of the TiO2 electrode. Both photooxidation and photoreduction of the immobilised proteins can be achieved. By employing pulsed UV laser excitation, the interfacial electron transfer kinetics can be monitored by transient optical spectroscopy, providing a novel probe of protein/electrode electron transfer kinetics. We conclude that nanoporous TiO2 films may be useful both for basic studies of protein/electrode interactions and for the development of novel bioanalytical devices such as biosensors.     

Photocatalytic polypyrrole-TiO2-nanoparticles composite thin film generated at the air-water interface

Herein, we report a new method of generation of TiO(2) nanoparticles (NPs) incorporated thin films of polypyrrole (PPy) at the air-water interface. Aqueous TiO(2) NPs when treated with H(2)O(2) and left in a chamber of pyrrole vapor resulted in the formation of a film at the interface, in addition to bulk precipitate. Spectroscopic, X-ray diffraction, and electron microscopic measurements establish the formation of a thin film of PPy with the incorporation of TiO(2) NPs. The TiO(2)-containing PPy films when transferred onto glass substrates were able to photo catalyze the decomposition of aqueous organic dyes: methyl orange and methylene blue. Further, these films could also photo catalyze the oxidation of iodide to triiodide ions in aqueous potassium iodide solution. We find that the PPy-TiO(2) composite films catalyze the reactions in the presence of light more efficiently than a suspension of TiO(2) NPs.     

Langmuir--Schaefer films of Nafion with incorporated TiO(2) nanoparticles

An easy method of incorporating TiO(2) nanoparticles into Nafion perfluorinated ionomer is proposed. Ultrathin films of Nafion were prepared by employing the Langmuir-Schaefer (LS) technique. The pressure-area isotherm study of a Langmuir monolayer of Nafion at the air-water interface on different concentrations of NaCl as the subphase allowed us to find the best experimental conditions for the deposition of stable Langmuir-Schaefer films. Incorporation of TiO(2) nanoparticles was performed by dipping Nafion LS films in a solution of TiO(2) nanoparticles. The uniformity of the TiO(2) incorporation was detected by UV-visible spectroscopy. The morphology of the Nafion, Nafion/TiO(2) nanoparticles thin films, and the changes due to the annealing procedure were investigated by atomic force microscopy. Interestingly, the AFM investigation showed that Nafion and Nafion/TiO(2) LS films have thermal stability up to 600 degrees C.     

CdS敏化对TiO2纳米薄膜电极光生电荷转移特性的影响

1991年Gratzel等[1]以敏化的TiO2纳米薄膜电极组成的液体结光电化学太阳能电池(PEC),其光电转换效率(IPCE)达到10%. 最近,选用固态电解质使这种PEC的IPCE达到33%[2].于是用有机染料[3,4]及窄带隙半导体纳米微粒[5]敏化的电极受到了广泛关注.     

Adsorption and solar light decomposition of acetone on anatase TiO2 and niobium doped TiO2 thin films

Adsorption and solar light decomposition of acetone was studied on nanostructured anatase TiO2 and Nb-doped TiO2 films made by sol-gel methods (10 and 20 mol % NbO2.5). A detailed characterization of the film materials show that films contain only nanoparticles with the anatase modification with pentavalent Nb oxide dissolved into the anatase structure, which is interpreted as formation of substituted Nb=O clusters in the anatase lattice. The Nb-doped films displayed a slight yellow color and an enhanced the visible light absorption with a red-shift of the optical absorption edge from 394 nm for the pure TiO2 film to 411 nm for 20 mol % NbO2.5. In-situ Fourier transform infrared (FTIR) transmission spectroscopy shows that acetone adsorbs associatively with eta1-coordination to the surface cations on all films. On Nb-doped TiO2 films, the carbonyl bonding to the surface is stabilized, which is evidenced by a lowering of the nu(C=O) frequency by about 20 cm(-1) to 1672 cm(-1). Upon solar light illumination acetone is readily decomposed on TiO2, and stable surface coordinated intermediates are formed. The decomposition rate is an order of magnitude smaller on the Nb-doped films despite an enhanced visible light absorption in these materials. The quantum yield is determined to be 0.053, 0.004 and 0.002 for the pure, 10% Nb:TiO2, and 20%Nb:TiO2, respectively. Using an interplay between FTIR and DFT calculations we show that the key surface intermediates are bidentate bridged formate and carbonate, and H-bonded bicarbonate, respectively, whose concentration on the surface can be correlated with their heats of formation and bond strength to coordinatively unsaturated surface Ti and Nb atoms at the surface. The oxidation rate of these intermediates is substantially slower than the initial acetone decomposition rate, and limits the total oxidation rate at t>7 min on TiO2, while no decrease of the rate is observed on the Nb-doped films. The rate of degradation of key surface intermediates is different on pure TiO2 and Nb-doped TiO2, but cannot explain the overall lower total oxidation rate for the Nb-doped films. Instead the inferior photocatalytic activity in Nb-doped TiO2 is attributed to an enhanced electron-hole pair recombination rate due to Nb=O cluster and cation vacancy formation.     

Phase transfer and its applications in nanotechnology

As nanoparticle syntheses in aqueous and organic systems have their own merits and drawbacks, specific applications may call for the transfer of newly formed nanoparticles from a polar to a non-polar environment (or vice versa) after synthesis. This critical review focuses on the application of phase transfer in nanoparticle synthesis, and features core-shell structures in bimetallic nanoparticles, replacement reactions in organic media, and catalytic properties of various nanostructures. It also describes the reversible organic and aqueous phase transfer of semiconductor and metallic nanoparticles for biological applications, and the use of phase transfer in depositing noble metals on semiconductor nanoparticles (258 references).     

Homogeneous functional Ni-P/ceramic nanocomposite coatings via stable dispersions in electroless nickel electrolytes

Stable nanoparticle dispersions in concentrated electrolytes are prerequisite for a variety of advanced nanocomposites prepared by deposition techniques. In this work we investigate the synthesis of electroless Ni-P/functional ceramic coatings from concentrated electrolytes containing functional nanoparticles such as TiO(2), α-Fe(2)O(3), ITO, and CeO(2). Stable nanoparticle dispersions in both low and high phosphorus electrolytes are achieved at plating temperatures (80-90 °C) by a generalized scheme employing comb-polyelectrolyte and antifreeze additives. Dispersion stability at room temperature is achieved in both low and high phosphorus EN media using anionic comb-polyelectrolyte surfactants with polyether side chain of 1100 g/mol. The optimal surfactant concentration is determined by zeta-potential and thermo-gravimetric analysis. Without additives the dispersions flocculate and sediment between 65 and 80 °C. Such phenomenon is believed to be associated with a critical flocculation temperature (CFT). The CFT is also weekly dependent on the particle type and the high ionic strength media. Addition of antifreeze additives such as propylene glycol and urea to the dispersions restores stability and increase the CFT for all particles. We estimate an average increase of the CFT by 1.5-2 °C per 1% additive for all particles and electrolytes. While the particle stabilization scheme is generalized in this work, the composite EN plating proved highly dependent on particle type. Baths containing ITO nanoparticles showed no plating reactions and those containing α-Fe(2)O(3) no nanoparticle co-deposition. In contrast, homogeneous Ni-P/TiO(2) and Ni-P/CeO(2) nanocomposites with up to 22 vol.% nanoparticles are produced. The possible application of the stabilization principles developed here for other functional nanocomposite systems is discussed.