Flow-injection chemiluminescence method for determination of critical micelle concentration of surfactants

In this study, chemiluminescence (CL) behaviour of Luminol-H₂O₂ in the presence of the different concentrations of four surfactants, cetyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), sodium dodecyl sulphate (SDS) and polyoxyethylene dodecyl ether (Brij-35), was investigated. A novel method for the direct determination of critical micelle concentration (CMC) of the surfactants using flow-injection CL is described. Under the optimum conditions, the luminescence intensity of the Luminol-H₂O₂ system increased gradually with increasing concentration of the surfactants before the CMC, but rapidly reached to the emission maximum at the CMC, followed by a decrease after the CMC. The concentrations of the surfactants corresponding to the luminescence maximum are in agreement with the literature CMC values. The main factors affecting the determination of CMC are discussed. The mechanistic studies show that the luminescence peaks observed in the experiment were mainly because of the protective effect of the micelle against the transition of the excited species and the retarding effect of the micelle structures on the CL reaction rate.     

Rapid determination of the critical micelle concentration by Taylor dispersion analysis in capillaries using both direct and indirect detection

The critical micelle concentration is a basic characteristic of surfactants. In this article, the process of formation of micelles is studied by Taylor dispersion analysis using capillary electrophoresis instrumentation as a substituent of capillary liquid chromatography. New methods for determination of critical micelle concentration are presented. Sodium octylbenzene sulfonate and sodium dodecylsulfate are used as model compounds with and without chromophore. Two novel approaches based on indirect ultraviolet detection and indirect Taylor dispersion analysis with direct ultraviolet detection are introduced for the determination of critical micelle concentration value of surfactant without any chromophore. The determined critical micelle concentration values are in correspondence with the tabulated values at 95% confidence level.     

流动注射-化学发光法测定十六烷基三甲基溴化铵的临界胶束浓度

采用流动注射技术，研究了CTAB-Luminol-H2O2体系的化学发光行为。CTAB对Luminol-H2O2体系的化学发光强度有明显的增强作用，并且在临界胶束浓度出现最大值，从而建立了流动注射-化学发光法直接测定CTAB的CMC的一种新方法，并给出了可能的作用机理。     

The Self-Association and Mixed Micellization of an Anionic Surfactant,Sodium Dodecyl Sulfate,and a Cationic Surfactant,Cetyltrimethylammonium Bromide: Conductometric,Dye Solubilization,and Surface Tension Studies

In the present study, we investigate the self-association and mixed micellization of an anionic surfactant, sodium dodecyl sulfate (SDS), and a cationic surfactant, cetyltrimethylammonium bromide (CTAB). The critical micelle concentration (CMC) of SDS, CTAB, and mixed (SDS + CTAB) surfactants was measured by electrical conductivity, dye solubilization, and surface tension measurements. The surface properties (viz., C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Π_CMC (the surface pressure at the CMC), Γ_max (maximum surface excess concentration at the air/water interface), and A_min (the minimum area per surfactant molecule at the air/water interface)) of SDS, CTAB, and (SDS + CTAB) micellar/mixed micellar systems were evaluated. The thermodynamic parameters of the micellar (SDS and CTAB), and mixed micellar (SDS + CTAB) systems were evaluated.

A schematic representation of micelles and mixed micelles.     

Temperature dependence of second critical micelle concentration of dodecyldimethylbenzylammonium bromide in aqueous solution

The specific conductivity of dodecyldimethylbenzylammonium bromide (C12BBr) in aqueous solutions, in the temperature range of 15 to 40 °C, has been measured as a function of molality. The two breaks which were found on the conductivity against molality plots were attributed to the critical micelle concentration, cmc, and second critical micelle concentration, 2^nd cmc, respectively. The ratio of the slopes, S, of the three linear fragments on the plots, S2/S1 and S3/S1, was attributed to the degree of ionization of the micelles at cmc and 2^nd cmc respectively. It was shown that the values of the 2^nd cmc estimated above 27 °C are only apparent due to thermal disintegration of the micelles. In the temperature range of 15 to 27 °C, the values of the 2^nd cmc increase gradually and the plot of the 2^nd cmc against temperature is concave. The ratio of 2^nd cmc/cmc for C12BBr at 25 °C amounts to 15 and appears to be high compared to the literature values for other surfactants. For comparative purposes the cmc and 2^nd cmc values were also estimated conductometrically for decyldimethylbenzylammonium bromide (C10BBr) at 25 °C. The 2^nd cmc value for this surfactant is higher compared to the value for the C12 homologue by a factor of 2.6.The standard Gibbs free energies of micellization at cmc and at the 2^nd cmc were estimated from the experimental data for both surfactants at 25 °C.     

Investigation of SDS, DTAB and CTAB micelle microviscosities by electron spin resonance

Electron spin resonance spectroscopy (ESR) of the nitroxide labelled fatty acid probes (5-, 16-doxyl stearic acid) was used to monitor the micelle microviscosity of three surfactants at various concentrations in aqueous solution: sodium dodecyl sulphate (SDS), dodecyltrimethylammonium bromide (DTAB) and cetyltrimethylammonium bromide (CTAB). At low surfactant concentration, there is no micelle, the ESR probe is dissolved in water/surfactant homogeneous phase and gives his microviscosity. At higher surfactant concentration, an abrupt increase in microviscosity indicates the apparition of micelles and, the solubilization of the probes in micelles. The microviscosity of the three surfactants, in a large surfactant range, was obtained as well as the critical micelle concentration (CMC). The microviscosity increased slightly with the increase in surfactant concentration. Phosphate buffer lowered the CMC value and generally increased the microviscosity.     

Interactions of Ionic Surfactants With PEO-PBO-PEO Triblock Copolymers in Aqueous Solutions

The interactions of triblock copolymers (TBP) with ionic surfactants were studied employing surface tensiometry, electrical conductivity, steady-state fluorescence (SSF), and dynamic light scattering (DLS) techniques. An increasing trend in the critical micelle concentration (CMC) of SDS/CTAB in the presence of triblock copolymers was observed especially at higher polymer to surfactant ratio. The delay in the CMC of surfactants was more pronounced in the presence of E₄₈B₁₀E₄₈ possibly due to its less hydrophobic nature. The negative values of free energy of micellization (ΔG_m) both in case of SDS and CTAB confirmed the spontaneity of the processes. The aggregation number (N_agg) and hydrodynamic radius (R_h) of polymer/surfactant mixed systems were determined by SSF and DLS. The suppression of the surfactant micelle size in the presence of TBP was confirmed by SSF and DLS studies.     

卵清蛋白与离子型表面活性剂的相互作用

本文通过荧光光谱法、紫外-可见吸收光谱法和透射电镜并结合电导率测定分别研究了水中卵清蛋白与阴离子表面活性剂十二烷基硫酸钠（SDS）和阳离子表面活性剂十二烷基三甲基溴化铵（DTAB）和十六烷基三甲基溴化铵（CTAB）之间的相互作用。研究结果表明卵清蛋白可以增加SDS和CTAB的临界胶束浓度,但对DTAB的临界胶束浓度没有影响。阴离子表面活性剂可以使卵清蛋白构象完全伸展,而阳离子表面活性剂却不具备此种作用。表面活性剂单体与卵清蛋白的相互作用强于表面活性剂胶束与卵清蛋白的相互作用。     

Effects of Metal Ions on the Micellization of Ionic Surfactants

The effect of metal ions (Cu(II), Zn(II), Co(II), Ni(II), La(III), Fe(III)) on the critical micelle concentration (CMC) of ionic surfactants (sodium dodecyl sulfate (SDS) and hexadecyltrimethylammonium bromide (CTAB)) were investigated at 25±0.1°C, μ = 0.1 M (KNO₃), using conductivity method in this paper. A series of general empirical expressions about the relationship between the CMC values for SDS and CTAB and the concentrations of metal ions have been derived. The results showed that the CMC values for both SDS and CTAB decreased with increasing the concentrations of metal ions. This can be interpreted by the counterion effect and the entropy driving effect.     

Detection of the critical micelle concentration of cationic and anionic surfactants based on aggregation-induced emission property of hexaphenylsilole derivatives

We report a fluorescence “turn-on” method to detect the critical micelle concentration (CMC) of surfactants. This method works well for both cationic and anionic surfactants. It employs an unprecedented mechanism (aggregation-induced emission, or AIE) to determine the CMC values, and the results are consistent with the data obtained by the classical techniques. In addition, this method renders the convenient detection of the CMC values. Any large and professional instruments are unnecessary, instead, a portable UV lamp and an ultrasonic generator are enough to carry out the detection in an ordinary laboratory. Considering that micelles are interesting entities and have found applications in many important fields such as emulsion polymerization, template of nanosized materials synthesis, controllable drug delivery and macromolecular self-assembling. Our experimental results may offer a facile, sensitive and promising method to detect the formation of micelles constructed by the new amphiphilic molecules and macromolecules. Supported by the National Natural Science Foundation of China (Grant Nos. 50573065 & 50873086) and the Natural Science Foundation of Zhejiang Province (Grant No. Z406018)     

Characterization of Surfactant-Diblock Copolymer Interactions and Its Thermodynamic Studies

The interaction of nonionic diblock copolymer poly(ethylene oxide butylene oxide) (E₆₂B₂₂) with a cationic surfactant cetyl trimethyl ammonium bromide (CTAB) and anionic surfactant sodium dodecyl sulphate (SDS) were studied using surface tension, conductivity, and dynamic laser light scattering techniques. Surface tension measurements were used to determine critical micelle concentration and thereby its free energy of adsorption (ΔG_ads), free energy of micellization (ΔG_m), surface excess concentration (Γ), and minimum area per molecule (A). Conductivity measurements were used to determine critical micelle concentration (CMC) critical aggregation concentration (CAC) at different temperatures, enthalpy of micellization (ΔH_m), free energy of micellization and entropy of micellization (ΔS_m). Changes in physicochemical properties of the micellized block copolymer were studied by using dynamic laser light scattering. The effect of surfactant on the size and properties of block copolymer has also been discussed.     

Rapid determination of surfactant critical micelle concentrations using pressure-driven flow with capillary electrophoresis instrumentation

This work demonstrates a novel, convenient utilization of capillary electrophoresis (CE) instrumentation for the determination of critical micelle concentrations (CMCs). Solution viscosity differences across a range of surfactant concentrations were monitored by hydrodynamically forcing an analyte towards the detector. Upon reaching the surfactant's CMC value, migration times were observed to change drastically. CMC values for four commonly employed anionic surfactants were determined—sodium dodecyl sulfate: 8.1 mM; sodium caprylate: 300 mM; sodium decanoate: 86 mM; sodium laurate: 30 mM; and found to be in excellent agreement with values previously reported in the literature. The technique was then applied to the less well-characterized nonionic surfactants poly(oxyethylene) 8 myristyl ether (CMC ∼ 9 M), poly(oxyethylene) 8 decyl ether (CMC ∼ 0.95 mM) and poly(oxyethylene) 4 lauryl ether.     

Interaction of Nonionic Surfactant Triton-X-100 with Ionic Surfactants

The interaction in two mixtures of a nonionic surfactant Triton-X-100 (TX-100) and different ionic surfactants was investigated. The two mixtures were TX-100/sodium dodecyl sulfate (SDS) and TX-100/cetyltrimethylammonium bromide (CTAB) at molar fraction of TX-100, α_TX-100 = 0.6. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γ_CMC), maximum surface excess concentration (Γ_max), and minimum area per molecule at the air/solution interface (A _min) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were also determined. Mixtures of both TX-100/SDS and TX-100/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.     

Steady-state fluorescence investigations of aqueous binary mixtures of myristyl alcohol based bis-sulfosuccinate anionic gemini surfactant and effect of different conventional surfactants therein

The present research work is associated with the fluorescence investigations of binary aqueous mixed surfactants solutions of anionic bis-sulfosuccinate gemini surfactant (BSGSMA_1,8) and three different conventional surfactants—anionic viz. sodium dodecyl sulfate (SDS), cationic viz. cetyl trimethyl ammonium bromide (CTAB), and nonionic surfactant viz. Triton X 100. Steady-state fluorescence spectroscopy technique has been utilized to examine the micellization behavior of aqueous solution of pure myristyl alcohol-based BSGSMA_1,8 having flexible methylene chain [(CH₂)₈] as spacer group. Critical micelle concentration (CMC), aggregation number (N), and micropolarity of pure and mixed surfactants systems were explored during the investigations. The results revealed the best synergism behavior of prepared gemini BSGSMA_1,8 with SDS as compared to CTAB and Triton X 100. The maximum reduction in the value of pyrene intensity ratio (I₁/I₃) was observed for gemini and SDS mixed surfactant solution. On the other hand, the increased I₁/I₃ value of mixed gemini with Triton X 100 exhibited that mixed surfactant system of anionic gemini BSGSMA_1,8 with non-ionic Triton X 100 is not as compact as other mixed surfactant systems. Aggregation number increased and micropolarity decreased with increased concentration of gemini surfactants.     

电导法测定无机盐对十二烷基磺酸钠溶液临界胶束浓度的影响

在40℃时利用电导法测定了无机盐NaCl、KCl、CuCl2、ZnSO4、Fe(NO3)3及AlCl3对十二烷基磺酸钠(SDS)溶液临界胶束浓度(CMC)的影响,并推导了表示无机盐浓度和SDS溶液CMC值之间关系的线性方程.结果表明,随着各种无机盐浓度的增加,SDS溶液的CMC值降低,且不同价态的金属无机盐对SDS溶液...     

Determination of critical micelle concentration values by capillary electrophoresis

An improved, simple capillary electrophoresis method for the determination of critical micelle concentration values in an easy way by plotting the corrected electric current values versus the surfactant concentrations at a given field was described. The critical micelle concentrations of sodium dodecyl sulfate in different solutions were obtained, and the values were in good agreement with those found in the literature. The text was submitted by the authors in English.     

Thermodynamic consideration of the mixed micelle of surfactants

In conformity with the conclusion obtained previously, the mixed micelle formation of surfactants was treated thermodynamically as the appearance of a macroscopic bulk phase with the aid of the excess thermodynamic quantities similar to those used for the adsorbed film. The composition of surfactant in the mixed micelle and the thermodynamic quantities of micelle formation were found to be evaluated by applying the thermodynamic equations derived. These equations were extended so as to be applicable to any kind of surfactant mixture. It was shown that the critical micelle concentration vs. composition of surfactant curves form a diagram analogous to the phase diagram of binary mixture. Applying the equation to the published data on typical surfactant systems, this thermodynamic approach was proved to be useful to clarify the miscibility of surfactants in the micellar state.     

Mechanism of surfactant micelle formation

The mechanism of micelle formation of surfactants sodium dodecyl sulfate (SDS), n-hexyldecyltrimethylammonium bromide (CTAB) and Triton X-100 (TX-100) in heavy water solutions was studied by 1H NMR (chemical shift and line shape) and NMR self-diffusion experiments. 1H NMR and self-diffusion experiments of these three surfactants show that their chemical shifts (delta) begin to change and resonance peaks begins to broaden with the increase in concentration significantly below their critical micelle concentrations (cmc's). At the same time, self-diffusion coefficients ( D) of the surfactant molecules decrease simultaneously as their concentrations increase. These indicate that when the concentrations are near and lower than their cmc's, there are oligomers (premicelles) formed in these three surfactant systems. Carefully examining the dependence of chemical shift and self-diffusion coefficient on concentration in the region just slightly above their cmc's, one finds that the pseudophase transition model is not applicable to the variation of physical properties (chemical shift and self-diffusion coefficient) with concentration of these systems. This indicates that premicelles still exist in this concentration region along with the formation of micelles. The curved dependence of chemical shift and self-diffusion coefficient on the increase in concentration suggests that the premicelles grow as the concentration increases until a definite value when the size of the premicelle reaches that of the micelle, i.e., the system is likely dominated by the monomers and micelles. Additionally, the approximate values of premicelle coming forth concentration (pmc) and cmc were obtained by again fitting chemical shifts to reciprocals of concentrations at a different perspective, and are in good accordant with experimental results and literature values and prove the former conclusion.     

离子液体型表面活性剂C12mimBr与普通表面活性剂混合性质的研究

研究了离子液体型表面活性剂C12mimBr与阳离子表面活性剂Gemini 12-3-12, DTAB及阴离子表面活性剂SDS复配体系的性质, 并分别采用Rubingh-Margules模型和Rubingh-正规溶液模型计算了临界胶束浓度和混合胶团组成. 研究发现, 两表面活性剂分子结构的匹配性及带电头基之间的相互作用是影响混合溶液性质的主要因素. 对于分子结构差别较大的C12mimBr与Gemini 12-3-12的混合, 其行为远远偏离理想混合性质; 对疏水链长相同仅亲水头基不同的C12mimBr与DTAB则接近于理想混合; 而对C12mimBr＋SDS的复配体系, 正、负电荷间强烈的相互吸引使得混合体系大大偏离理想行为. 计算发现, 两种理论模型得到的混合胶团组成基本一致, 但Rubingh-Margules模型预测的临界胶束浓度比Rubingh-正规溶液模型要好