纳升电喷雾串联质谱法确证阿托西班的一级结构

利用电喷雾串联质谱对合成八肽阿托西班进行了二硫键还原前后的精确分子量测定和一级结构的确证.首先通过全扫描模式测定了其还原前后的精确分子量,然后选择母离子m/z 498.73(双电荷)通过串联质谱(MS/MS)得到碎片离子,采用Y离子的方法测定了阿托西班的序列并对其的修饰位点进行了确证.本方法具有灵敏度高、速度快、样品无需纯化等特点,在多肽类药物一级结构分析方面具有独特的优势.     

纳升电喷雾串联质谱在阿托西班一级结构确证中的应用

利用电喷雾串联质谱对合成八肽阿托西班进行了二硫键还原前后的精确相对分子质量测定和一级结构的确证.首先通过全扫描模式测定了其还原前后的精确相对分子质量,然后通过串联质谱(MS/MS)得到母离子m/z 498.73(双电荷)的碎片离子,采用y离子的方法测定了阿托西班的序列并对其修饰位点进行了确证.该方法具有灵敏度高、速度快、样品无需纯化等特点,在多肽类药物一级结构分析方面具有独特的优势.     

CZE-ESI-MS联用测定小肽混合物的研究

研究肽的分离行为、测定方法及测定条件对蛋白质组学研究具有重要意义 .毛细管电泳 ( CE)作为一种高效、快速的分离方法 ,样品用量少 ,已被广泛应用于生物领域中 ,尤其是小肽和蛋白质的分离分析 .质谱 ( MS)能够进行微量鉴定 ,并提供精确的分子量和结构信息 ,使其成为小肽和蛋白质检测和序列测定的强有力的支撑技术之一 [1～ 3] .其中 ,电喷雾 ( ESI)质谱作为一种软电离技术 ,易与常规的高分辨率分离方法如高效液相色谱、毛细管电泳等实现在线联用 ,具有分离效率高、检测灵敏度高和样品定性方便等特点 ,因而在小肽和蛋白质的测定中得到广…     

合成多肽的电喷雾质谱研究

利用电喷雾多极串联质谱对3种合成多肽进行了系统的鉴定和分析研究。首先通过全扫描模式测定了其分子量，然后选择[M H]^ 或[M 2H]^2 离子通过串联质谱(MS／MS)得到碎片离子，采用y离子和b离子互补的方法测定了多肽序列。利用文献数据对这种方法进行了验证，实验结果表明，该方法简便、快速、实用。     

小分子化合物在离子阱质谱中的分子离子反应研究

利用离子阱质谱的原理和特点，研究了小分子醇、醚、胺、醛、酮等有机化合 物（分子量小于200）在离子阱里的分子离子反应，总结了反应特点和规律，并把 它归类为自身化学电离（SCI）反应。以丁酮、丙烯醇为例，采用FTMS对反应产物 离子进行准确质量测定，验证了它们各自的分子离子反应结果。另外，把该类化合 物（30个）SCI反应的质谱图与NIST98库中的标准EI质谱图进行了比较，建立了 SCI质谱图库，提高了在离子阱质谱上对这类小分子化合物定性分析的准确率。     

毛细管电泳-质谱联用技术及其在蛋白质组学中的应用

蛋白质组学研究在生物学、精准医学等方面发挥着重要的作用。然而研究面临的巨大挑战来自生物样品的复杂性,因此在质谱（MS）鉴定技术不断革新的同时,发展分离技术以降低样品复杂度尤为重要。毛细管电泳（CE）技术具有上样体积小、分离效率高、分离速度快等优势,其与质谱的联用在蛋白质组学研究中越来越受到关注。低流速鞘流液和无鞘流液接口的发展及商品化推动了CE-MS技术的发展。目前毛细管区带电泳（CZE）、毛细管等电聚焦（CIEF）、毛细管电色谱（CEC）等分离模式已与质谱联用,其中CZE-MS应用最广泛。目前被广泛采用的蛋白质组学研究策略主要是基于酶解肽段分离鉴定的"自下而上（bottom-up）"策略。首先,CE-MS技术对酶解肽段的检测灵敏度高达1 zmol,已成功应用于单细胞蛋白质组学;其次,毛细管电泳技术与反相液相色谱互补,为疏水性质相近的肽段（尤其是翻译后修饰肽段）的分离鉴定提供了新的途径。基于整体蛋白质分离鉴定的自上而下"top-down"策略可以直接获得更精准、更完整的蛋白质信息。CE技术在蛋白质大分子的分离方面具有分离效率高、回收率高的优势,其与质谱的联用提高了整体蛋白质的鉴定灵敏度和覆盖度。非变性质谱（native MS）是一种在近生理条件下从完整蛋白质复合物水平上进行分析的质谱技术。CE与非变性质谱联用已被尝试用于蛋白质复合体的分离鉴定。该文引用了与CE-MS和蛋白质组学应用相关的93篇文献,综述了以上介绍的CE-MS的研究进展以及在蛋白质组学分析中的应用优势,并总结和展望了其应用前景。     

溴化氰裂解结合电喷雾串联质谱测定电泳分离蛋白的C端序列

C端测序是蛋白质及多肽一级结构确认的重要组成部分,也是重组蛋白药物质量控制的重要依据。建立了溴化氰裂解结合电喷雾串联质谱测定蛋白质C端序列的方法,并应用于重组人肿瘤坏死因子受体和纽兰格林的C端测序。首先根据待测蛋白序列进行溴化氰理论裂解,如果C-端肽段理论分子量在500~5000U之间,则将待测样品进行SDS-PAGE分离,考马斯亮兰染色,然后进行胶内溴化氰裂解,最后应用基质辅助激光解吸/电离飞行时间质谱(MALDI-TOF-MS)测定C-端肽段的分子量,电喷雾串联质谱对C端肽段进行测序。应用本方法分别测定了这两个蛋白质C端19个和11个氨基酸残基序列。研究结果表明:本方法灵敏、有效、实用性较强,可适用于部分重组蛋白药物的质量控制和蛋白质的结构确证,是对目前蛋白质C端测序方法的有效补充。     

Edman降解中异硫氰酸苯酯新修饰位点的发现和验证

Edman降解是最早建立的一种用于多肽和蛋白质氨基端测序的方法,该方法现在仍被广泛用于生物化学领域。随着高通量蛋白质组学技术的发展和应用,该方法中的异硫氰酸苯酯反应被用于修饰蛋白质氨基端,并用于检测蛋白质水解位点。但还没有异硫氰酸苯酯是否可以修饰其他氨基酸侧链并影响多肽序列分析的研究。为了探究其修饰其他氨基酸的可能性,本文利用基质辅助激光解吸电离飞行时间质谱（MALDI-TOF-MS）和液相色谱-串联质谱（LC-MS/MS）研究了异硫氰酸苯酯对一个模型肽的化学修饰。质谱数据解析后发现在高浓度异硫氰酸苯酯的反应条件下,组氨酸上可以引入一个新的异硫氰酸苯酯修饰位点。这一修饰位点的发现预示着通过改变实验条件或分析方法,可以更准确地利用Edman降解和蛋白质组学技术分析多肽和蛋白质。     

季铵化磁性壳聚糖复合材料对磷酸化肽的富集研究

蛋白质磷酸化是最重要和最普遍的翻译后修饰之一,蛋白质磷酸化的测定对于全面了解生物过程中的磷酸化途径至关重要。质谱技术是分析蛋白质磷酸化的重要手段,但磷酸化肽固有的低丰度、低电离效率以及与非磷酸化肽共存等特性严重影响质谱对其进行直接分析。为解决此问题,需在质谱分析前对磷酸化肽进行选择性富集。本研究制备了一种基于季铵化磁性壳聚糖的复合材料用于磷酸化肽的富集。此磁性材料具有快速的磁响应性、良好的生物相容性、正电性以及廉价易得等优点。采用β-酪蛋白作为模型蛋白质,结果表明此材料对磷酸化肽具有良好的富集选择性。经过富集后,结合基质辅助激光解吸电离飞行时间质谱（MALDI-TOF MS）检测手段,方法的检出限为0.4 fmol。本方法被成功用于脱脂牛奶中磷酸化肽的检测,表明其对复杂样品中磷酸化肽的富集和检测具有良好的应用潜力。     

亚微米电喷雾喷针在非变性质谱分析中的研究进展

非变性质谱技术已成为表征蛋白质结构的重要工具之一。与传统的电喷雾喷针(Electrospray emitter,ESI emitter)相比,亚微米电喷雾喷针具有改变离子电荷态分布和降低盐离子加合等多种特性,可在生理环境下直接解析蛋白质的结构。该文综述了亚微米电喷雾喷针的特性及其在非变性质谱分析中的应用,并对其未来的发展趋势进行了展望。     

Solid Phase Peptide Synthesis

The last two decades have been an era of rapid progress in peptide research. This era was begun by the work of Sanger on the amino acid sequence determination of insulin and by du Vigneaud on the structure determination and synthesis of oxytocin. This period has seen impressive progress in the structure elucidation and synthesis of many peptides of natural origin and of great biological significance, as well as in methods for sequence determination and chemical synthesis of peptides [1–4]. Perfection of techniques and instruments for automatic determination of the amino acid sequence of peptides and proteins has made possible a greatly broadened understanding of genetics and evolution as well as the more chemical areas of mechanism of action of enzymes and hormones, and physical chemistry of peptides and proteins. Effective methods of peptide synthesis are crucial to progress in this area, because only by synthesis can adequate amounts of important peptides be made available for chemical, biological, and physical studies, as well as for exploration of the structure-function aspects of biological molecules. In general, progress in peptide synthesis has lagged far behind that in amino acid sequence determination. This is not surprising since effective peptide synthesis requires a very sophisticated system of selectively removable protecting groups for functions of the amino acids involved, and the synthesis of a large heteropolytner of defined sequence requires near perfection of each one of the many steps of the assembly. The classical approach to peptide synthesis, using standard organic chemical methods of synthesis and purification of intermediates, has yielded impressive results during these two decades. However, the special problems associated with the assembly of large molecules make staggering investments in time and materials necessary for the synthesis of large peptides or proteins by classical methods.     

Peering into Biological Nanopore: A Practical Technology to Single‐Molecule Analysis

As a unique technique at the singe‐molecule level to explore the distribution and temporal order of events, nanopore technology has attracted increasing attention. In comparison to the previous applications in DNA sequencing, this Focus Review highlights the technical details of biological nanopores, especially α‐hemolysin, in the analysis of peptides and proteins. The instrument configurations, experimental interferences, and data analysis including the conformation of peptides and proteins and their interactions for single‐molecule detection are discussed.     

Quantitative mass spectrometry in proteomics: a critical review

The quantification of differences between two or more physiological states of a biological system is among the most important but also most challenging technical tasks in proteomics. In addition to the classical methods of differential protein gel or blot staining by dyes and fluorophores, mass-spectrometry-based quantification methods have gained increasing popularity over the past five years. Most of these methods employ differential stable isotope labeling to create a specific mass tag that can be recognized by a mass spectrometer and at the same time provide the basis for quantification. These mass tags can be introduced into proteins or peptides (i) metabolically, (ii) by chemical means, (iii) enzymatically, or (iv) provided by spiked synthetic peptide standards. In contrast, label-free quantification approaches aim to correlate the mass spectrometric signal of intact proteolytic peptides or the number of peptide sequencing events with the relative or absolute protein quantity directly. In this review, we critically examine the more commonly used quantitative mass spectrometry methods for their individual merits and discuss challenges in arriving at meaningful interpretations of quantitative proteomic data.     

Tandem mass spectrometry methods for definitive protein identification in proteomics research

Optimized procedures have been developed for the addition of sulfonic acid groups to the N-termini of low-level peptides. These procedures have been applied to peptides produced by tryptic digestion of proteins that have been separated by two-dimensional (2-D) gel electrophoresis. The derivatized peptides were sequenced using matrix-assisted laser desorption/ionization (MALDI) post-source decay (PSD) and electrospray ionization-tandem mass spectrometry methods. Reliable PSD sequencing results have been obtained starting with sub-picomole quantities of protein. We estimate that the current PSD sequencing limit is about 300 fmol of protein in the gel. The PSD mass spectra of the derivatized peptides usually allow much more specific protein sequence database searches than those obtained without derivatization. We also report initial automated electrospray ionization-tandem mass spectrometry sequencing of these novel peptide derivatives. Both types of tandem mass spectra provide predictable fragmentation patterns for arginine-terminated peptides. The spectra are easily interpreted de novo, and they facilitate error-tolerant identification of proteins whose sequences have been entered into databases.     

Derivatization procedures to facilitate de novo sequencing of lysine-terminated tryptic peptides using postsource decay matrix-assisted laser desorption/ionization mass spectrometry

Guanidination of the epsilon-amino group of lysine-terminated tryptic peptides can be accomplished selectively in one step with O-methylisourea hydrogen sulfate. This reaction converts lysine residues into more basic homoarginine residues. It also protects the epsilon-amino groups against unwanted reaction with sulfonation reagents, which can then be used to selectively modify the N-termini of tryptic peptides. The combined reactions convert lysine-terminated tryptic peptides into modified peptides that are suitable for de novo sequencing by postsource decay matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The guanidination reaction is very pH dependent. Product yields and reaction kinetics were studied in aqueous solution using either NaOH or diisopropylethylamine as the base. Methods are reported for derivatizing and sequencing lysine-terminated tryptic peptides at low pmole levels. The postsource decay (PSD) MALDI tandem mass spectra of a model peptide (VGGYGYGAK), the homoarginine analog and the sulfonated homoarginine analog are compared. These spectra show the influence that each chemical modification has on the peptide fragmentation pattern. Finally, we demonstrate that definitive protein identifications can be achieved by PSD MALDI sequencing of derivatized peptides obtained from solution digests of model proteins and from in-gel digests of 2D-gel separated proteins.     

Peptidomics: the comprehensive analysis of peptides in complex biological mixtures

Progress in the sequencing of genomes has resulted in an increasing demand for a functional analysis of gene products in order to understand the underlying physiology. Proteomics has established itself as a highly valuable technology for producing functionally related data in an unparalleled fashion, but is methodologically restricted to the analysis of proteins with higher molecular masses (>10 kDa). The development of a technology which covers peptides with low molecular weight and small proteins (0.5 to 15 kDa) was necessary, since peptides, amongst them families of hormones, cytokines and growth factors, play a central role in many biological processes. To summarise the technologies used for this approach the term "peptidomics" is introduced. In this article, we present the rationale and first results of a novel, universal peptide display approach for the analysis and visualisation of peptides and small proteins from biological samples. Special attention is given to samples derived from extracellular fluids such as blood plasma and cerebrospinal fluid. Additionally, a high throughput identification procedure for the analysis of peptides in their native and processed molecular form is outlined.     

Lipidated ras and rab peptides and proteins--synthesis, structure, and function

Chemical biology can be defined as the study of biological phenomena from a chemical approach. Based on the analysis of relevant biological phenomena and their structural foundation, unsolved problems are identified and tackled through a combination of chemistry and biology. Thus, new synthetic methods and strategies are developed and employed for the construction of compounds that are used to investigate biological procedures. Solid-phase synthesis has emerged as the preferred method for the synthesis of lipidated peptides, which can be chemoselectively ligated to proteins of the Ras superfamily. The generated peptides and proteins have solved biological questions in the field of the Ras-superfamily GTPases that are not amendable to chemical or biological techniques alone.     

尺寸排阻-反相液相色谱-质谱联用技术在大鼠肾脏翻译后修饰蛋白质鉴定中的应用

LC-MS联用技术在蛋白质组学研究中具有重要的作用,但是在复杂的生物体系中,由于样品的高度复杂性和其中蛋白质含量的巨大差异,执行全面且无倾向的蛋白质组分析是一项挑战。因此,在液相色谱分离中采用基于不同原理的色谱分离方法来降低蛋白质样本的复杂度,并对微量蛋白质进行富集,对后续采用质谱方法进行信息的采集和深入分析至关重要。在这里我们开发了一种基于尺寸排阻色谱(SEC)与反相液相色谱(RPLC)结合的新方法来进行复杂体系蛋白质的分离和鉴定,特别是对于微量蛋白质的分析。首先使用SEC对蛋白质进行分离和富集,并酶解成多肽,再通过RPLC-MS联用的方法对酶解后的多肽进行分离和鉴定。结果显示使用上述方法可以有效降低蛋白质样本的复杂度,并有效提高微量蛋白质的鉴定能力,可从大鼠肾脏鉴定出23621个肽段及1345个蛋白质,比常规的二维强阳离子交换-反相液相色谱法(2D SCX-RPLC)鉴定到的肽段及蛋白质分别多出69%及27%。此外,该方法对肾脏翻译后修饰(PTM)蛋白质的鉴定显示出更多的优势,翻译后修饰的多肽鉴定率显著增加,特别是磷酸化肽段的鉴定效率可达到靶向富集策略的水平。在此展示的SEC-RPLC-MS可以更好地了解蛋白质翻译后修饰对肾脏的影响,最终将有助于增加我们对正常的生理性肾功能以及病理过程机制的理解。     

Cysteine‐reactive covalent capture tags for enrichment of cysteine‐containing peptides

Considering the tremendous complexity and the wide dynamic range of protein samples from biological origin and their proteolytic peptide mixtures, proteomics largely requires simplification strategies. One common approach to reduce sample complexity is to target a particular amino acid in proteins or peptides, such as cysteine (Cys), with chemical tags in order to reduce the analysis to a subset of the whole proteome. The present work describes the synthesis and the use of two new cysteinyl tags, so‐called cysteine‐reactive covalent capture tags (C³T), for the isolation of Cys‐containing peptides. These bifunctional molecules were specifically designed to react with cysteines through iodoacetyl and acryloyl moieties and permit efficient selection of the tagged peptides. To do so, a thioproline was chosen as the isolating group to form, after a deprotection/activation step, a thiazolidine with an aldehyde resin by the covalent capture (CC) method. The applicability of the enrichment strategy was demonstrated on small synthetic peptides as well as on peptides derived from digested proteins. Mass spectrometric (MS) analysis and tandem mass spectrometric (MS/MS) sequencing confirmed the efficient and straightforward selection of the cysteine‐containing peptides. The combination of C³T and CC methods provides an effective alternative to reduce sample complexity and access low abundance proteins. Copyright © 2009 John Wiley & Sons, Ltd.     

纳升液相色谱-质谱分析方法的重现性对尿液多肽组分析结果的影响

多肽组学是蛋白质组学技术的延伸和扩展,在医学和生物学研究中的应用日益广泛,但是,多肽组鉴定方法的重现性对实验结果的影响目前尚不清楚.本研究利用纳升液相色谱-高分辨质谱对健康人的尿液多肽组进行了7次平行分析,考察图谱数目、图谱利用率、鉴定的肽段数目、蛋白质数目、样品总离子强度和肽段保留时间等指标的变化,以揭示重复实验之间分析结果的可变性和稳定性.7次测定的肽段数目平均值为208,标准偏差为38;7次结果合并后,得到了归属于114个蛋白质的426个肽段,肽段和蛋白质数目均显著增加;而35个蛋白质的109个肽段在所有7次实验中均被检出,表明多肽组的单次分析结果既具有一定的随机性,又具有相对的稳定性.增加平行实验次数会扩大多肽组数据集,但测定3次以上后增加幅度减小.相比于肽段,多肽组的结果在蛋白质水平上更为稳定,提示利用蛋白质为多肽组的生物标志物更为稳健.