纳米羟基磷灰石纳米管的一种简便制备方法及其对溶液中重金属离子的吸附（英文）

采用简便的方法合成了20～40 nm长、56 m~2·g~(-1)的比表面积的羟基磷灰石纳米管(HAP)。然后用制备的HAP纳米管在水溶液中同时吸附Pb~(2+)、Cd~(2+)、Cu~(2+)、Co~(2+)、Ni~(2+)、Zn~(2+)和Hg~(2+),其具有高的吸附能力,并能实现快速去除。此外,制备的HAP纳米管对7种重金属离子的脱附率均小于1%,表现出较强的稳定性。实验数据采用Langmuir等温线模型和Freundlich等温线模型进行分析。2个方程的应用结果表明,吸附平衡最适合Langmuir模型,单层饱和吸附能力为958.28 mg·g~(-1),具有较好的吸附性能。通过能量色散X射线光谱(EDS)和X射线衍射(XRD)图进一步研究了吸附机理,结果表明,当溶液中Pb~(2+)离子数量足够时,吸附机理为Pb取代了HAP中的Ca,形成了更稳定的Pb_5(PO_4)_3(OH)。上述实验研究预测了利用HAP纳米管处理含铅废水在环境污染治理中的可行性。     

巯基/羧基修饰硅藻土及其对Pb(Ⅱ)、Cd(Ⅱ)的吸附性能

以3-巯基丙基三甲氧基硅烷(MPTS)、3-氨基丙基三乙氧基硅烷(APTES)、柠檬酸(CA)为原料,采用水浴法、水浴/低温水热法,分别制备了巯基(—SH)、氨基/羧基(—NH2/—COOH)表面修饰的硅藻土。采用傅里叶变换红外光谱、扫描电子显微镜、氮气吸附-脱附测试、热重/差示扫描量热法、X射线光电子能谱等技术对样品进行了表征,并探讨分析了样品制备机理。当重金属离子溶液pH=7,吸附时间为4 h时,以MPTS制备的巯基修饰硅藻土吸附剂对Pb(Ⅱ)、Cd(Ⅱ)的最大吸附容量分别为396、365 mg·g^-1;以APTES、CA制备的氨基/羧基缩合修饰硅藻土吸附剂对Pb(Ⅱ)、Cd(Ⅱ)最大吸附容量分别为485、462 mg·g^-1。     

羟基磷灰石用于高效去除湖水中苯甲酰脲类农药的研究

以CaCO₃为钙源和内核，Na₃PO₄为磷源，采用水热合成法制备了羟基磷灰石(HAP)用于湖水中苯甲酰脲类农药(BUs)的去除。首先采用扫描电子显微镜、X-射线衍射仪、全自动比表面积及孔隙分析仪对HAP进行表征，考察了溶液pH和离子强度对BUs吸附的影响，以及HAP的再生及重复使用性能，探讨了HAP对BUs的吸附动力学、等温线和热力学模型。结果表明，25℃下，当溶液pH为6.0,0.1 g/L HAP在20 min内对BUs的吸附容量达114.7～194.3 mg/g。吸附行为符合二级动力学方程(R²≥0.963)和Langmuir模型(R²≥0.992),且该过程是自发的、吸热反应。使用2 mL乙腈和超纯水将HAP再生，重复吸附-解吸20次内，对氟啶脲的最大吸附容量均在167.9～199.7 mg/g,其相对标准偏差≤12%。     

锌镍铝水滑石微球的制备及吸附性能

以Zn(NO_3)_2·6H_2O、Ni(NO_3)_2·6H_2O、Al(NO_3)_3·9H_2O和尿素为原料,采用一步水热法制备分散性良好的三元锌镍铝水滑石(ZnNiAl-LDHs)微球。通过X射线衍射(XRD)、傅里叶转换红外光谱(FTIR)、场发射扫描电镜(FESEM)、透射电镜(TEM)和氮气吸附-脱附等测试手段对样品的结构和形貌进行表征,并比较ZnNiAl-LDHs和ZnAl-LDHs对甲基橙(MO)的吸附性能。结果表明,ZnNiAl-LDHs是由纳米片组成、具有3D结构的微球,粒径为1~2.5μm,比表面积为156m2·g~(-1),远大于ZnAl-LDHs的比表面积38m2·g~(-1);ZnNiAl-LDHs和ZnAl-LDHs对甲基橙的饱和吸附量分别为329.60和143.47mg·g~(-1),ZnNiAl-LDHs表现出更强的吸附能力,其吸附等温线和吸附动力学分别符合Langmuir等温线模型和准二级动力学模型。     

巯基功能化膨润土吸附Pb2+的动力学和热力学研究

研究了自制巯基功能化膨润土(TFB)对Pb2+的吸附行为,考察了溶液的pH值、离子强度、吸附时间和温度对吸附平衡的影响,并对吸附过程进行了动力学与热力学研究.结果表明,常温下,吸附时间为60min、0.1mol/L的KNO3、pH=6.0、5.0g/L TFB对200mg/L的Pb2+的吸附率达到85.4％以上,TFB对Pb2+的吸附动力学符合准二级动力学方程;TFB对Pb2+的吸附热力学符合Langmuir等温线方程和Dubinin-Radushkevich (D-R)等温线方程,表明吸附主要发生在TFB表面的活性区域,属于单分子层吸附,其吸附平均活化能E在8-16kJ/mol范围内,表明该吸附过程为化学吸附,不同温度下的吸附热力学的吉布斯自由能以及熵变和焓变表明该吸附过程为自发放热反应.     

溶剂热条件对MIL-53(Fe)结晶度及吸附性能的影响

采用溶剂热法制备一系列金属有机骨架材料MIL-53(Fe),使用傅立叶变换红外光谱仪、X射线衍射仪、电子扫描电镜等表征手段对其结构进行表征.探讨了其对有机染料亚甲基蓝的吸附性能.通过改变反应温度来调控MIL-53(Fe)的结晶度,结果表明,高结晶度的MIL-53(Fe)更利于吸附行为.吸附动力学、等温线研究表明,该吸附过程符合准二级动力学和Langmuir等温线模型.     

三乙烯四胺改性榴莲壳吸附水溶液中的Cd~(2+)、Pb~(2+)

采用三乙烯四胺改性榴莲壳,制备新型的改性榴莲壳吸附剂,研究其对Cd2+、Pb2+的吸附性能。结果表明,吸附Cd2+、Pb2+的适宜条件为:pH 6.0,吸附时间120 min。改性后榴莲壳吸附剂对Cd2+、Pb2+的吸附容量有了很大程度的提高,Cd2+、Pb2+最大吸附量分别达到39.30、53.76 mg/g。吸附过程可以很好地用准二级动力学方程描述,吸附等温线用Langmuir方程的拟合效果优于Freundlich方程。     

明胶-环氧聚醚胺交联膜的合成及其对重金属离子的吸附性能

首先利用聚乙二醇二缩水甘油醚(PEO-DE)、聚二甲基硅氧烷二缩水甘油醚(PDMSDE)与无水哌嗪以1∶1∶1的物质的量之比反应合成环氧封端的聚醚胺(ePEA),然后将ePEA分散在水相中与明胶混合,浇铸固化成膜。利用红外光谱(FT-IR)、X射线衍射(XRD)、示差扫描量热法(DSC)和原子吸收光谱(AAS)等手段研究了明胶-环氧聚醚胺交联膜的结构和离子吸附性能。结果表明,与纯明胶膜相比,交联膜中的环氧聚醚胺与明胶之间出现了新的化学交联结构,在水溶液中的稳定性提高;交联膜对Cu2+、Pb2+、Cd2+均有一定的吸附作用,并且吸附能力随着ePEA含量的增加而增加;吸附过程符合二级动力学模型和Langmuir等温模型。     

（英）二氧化钛/石墨烯复合材料对水溶液中钯离子的吸附性能研究

本文合成了一种新型二氧化钛/石墨烯(TiO2-Gr)复合材料吸附剂,研究了其对水溶液中Pd(II)的吸附作用,并与TiO2的吸附性能进行了比较。制得的TiO2-Gr吸附剂分别进行了透射电子显微镜(TEM)表征及X射线衍射(XRD)分析,考察了吸附过程中时间、溶液p H、吸附剂用量、离子强度、Pd(II)浓度和温度等参数对吸附量的影响。研究了吸附过程中动力学、热力学及吸附等温线。结果表明吸附过程符合假二级动力学模型,吸附等温线符合Langmuir和Freundlich等温吸附方程。对热力学函数(吉布斯函数变、焓变、熵变)测定表明,本文合成的TiO2-Gr吸附剂对Pd(II)的吸附属于自发吸热反应。     

α-MnO_2纳米管自组装微球的可控制备及电化学性能

以KMnO_4、HCl为反应物,H_2SO_4、NH_4Cl为助剂,利用水热法成功合成了α-MnO_2纳米管自组装微球。并采用X射线晶体衍射(XRD)、场发射扫描电子显微镜(SEM)、透射电子显微镜(TEM)以及X射线光电子能谱(XPS)表征手段对产物进行了形貌和结构表征,发现H~+与Cl-离子浓度对产物的晶型有很大影响:单一增加H+或Cl-离子浓度可以使纳米管管径减小、长度增加;同时增加两种离子浓度则产物从α相转化为β相;NH4+可以起到维持产物晶型(α相)以及管状形貌的作用。电化学性能测试表明,具有独特形态的α-MnO_2纳米管微球作为锂电负极具有高容量(20 m A·g-1电流密度下首周放电比容量达1783.5 m Ah·g-1)与良好的倍率性能,是具有广阔应用前景的锂离子电池材料。     

双功能化磁性纳米修复剂对多重金属的快速、高效钝化行为

采用“一锅法”制备了四氧化三铁/半胱氨酸（Fe₃O₄/Cys）磁性纳米微球,随后对Fe₃O₄/Cys进行亚氨基二乙酸（IDA）修饰得到Fe₃O₄/Cys/IDA磁性双功能化纳米微球。研究发现Fe₃O₄/Cys中的L-Cys是通过—SH基团接枝到Fe₃O₄表面的,随后IDA分子中的羧基与Fe₃O₄/Cys中的—NH₂形成酰胺键,最终形成多支链多羧基的Fe₃O₄/Cys/IDA磁性纳米修复剂。基于修复剂表面短支链-长支链交替的多羧基结构,实现了羧基基团的高密度接枝。同时,Fe₃O₄/Cys/IDA磁性纳米微球对Pb²⁺、Cd²⁺、Cu²⁺、Co²⁺、Ni²⁺、Zn²⁺为专性吸附,而对Hg²⁺属于非专性吸附,且吸附重金属后得到的钝化产物均表现了良好的稳定性。另外,Fe₃O₄/Cys/IDA对重金属离子的吸附符合Langmuir模型,属于单层均相吸附,其吸附过程符合准二级动力学模型,最大吸附量为49.05 mg·g^-1。     

一步热解法制备Cu/Fe双金属生物炭复合材料及其高效吸附Pb2+性能

使用一步热解法制备了Cu/Fe双金属生物炭复合材料(BC@Cu/Fe-X,X=3、5、10)和Fe生物炭复合材料(BC@Fe)。考察了Cu掺杂量对BC@Cu/Fe-X吸附Pb²⁺的影响,确定最佳掺杂比例。结果显示BC@Cu/Fe-5吸附Pb²⁺性能最好。考察了吸附时间、Pb²⁺浓度、p H、背景离子、空气中老化等实验条件对BC@Cu/Fe-5吸附Pb²⁺的影响。通过动力学、热力学数据拟合分析了BC@Cu/Fe-5吸附Pb²⁺的行为,利用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FTIR)等表征手段解析了BC@Cu/Fe-5吸附Pb²⁺前后特征峰变化。BC@Cu/Fe-5吸附Pb²⁺的机理如下：大约42%的Pb²⁺被还原为Pb⁰,33%的Pb²⁺形成Pb O/Pb(OH)₂,25%的Pb²⁺与O—...     

硫化铜空心纳米球的融硫修饰及其对水中Hg^2+的高选择性吸附富集

通过简单便捷的方法合成出了单质硫改性的CuS空心球纳米材料(CuS@S HSs),并研究了该材料对水中典型重金属污染物Hg^2+的吸附富集性能及机理。研究结果表明,当硫的投料质量比值(wS/wCuS))为30%时,CuS@S HSs对Hg^2+的吸附量高达1207mg·g^-1,较未负载单质硫时提高了229%。CuS@S HSs可以在15 min内将水中超过99%的Hg^2+富集分离。最重要的是,在多种重金属离子(Pb^2+、Ni^2+、Cd^2+、Cr^3+)共存的情况下,CuS@S HSs对Hg^2+表现出优异的单一选择吸附性。     

Adsorption syntax of Au(III) on unloaded polyurethane foam

The nature of adsorption behavior of Au(III) on polyurethane (PUR) foam was studied in 0.2M HCl aqueous solution. The effect of shaking time and amount of adsorbent were optimized for 3.16·10⁻⁵M solution of Au(III) in 0.2M HCl. The classical Freundlich and Langmuir adsorption isotherms have been employed successfully. The Freundlich parameters 1/n and adsorption capacityK are 0.488±0.016 and (1.40±0.22)·10⁻² mol·g⁻¹, respectively. The Langmuir constants of saturation capacityM and binding energyb are (1.66±0.08)·10⁻⁴mol·g⁻¹ and 40294±2947 l·g⁻¹, respectively, indicating the monolayer chemical sorption. The mean free energy (E) of adsorption of Au(III) on PUR foam has been evaluated using D-R isotherm and found to be 11.5±0.16 kJ·mol⁻¹ reflecting the ion exchange type of chemical adsorption. The effect of temperature on the adsorption has also been studied. the isosteric heat of adsorption was found to be 44.03±1.66 kJ·mol⁻¹. The thermodynamic parameters of ΔG, ΔH, ΔS and equilibrium constantK _c have been calculated. The negative values of ΔG, ΔH and ΔS support that the adsorption of Au(III) on PUR foam is spontaneous, exothermic and of ion exchange chemisorption. The nature of the Au(III) species sorbed on PUR foam have been discussed.     

磁性壳聚糖复合微球的制备及其Cu~(2+)吸附性能

以球磨后的粉煤灰磁珠(MS)颗粒为磁核,通过溶胶凝胶法和反相微乳液法依次包覆SiO_2和壳聚糖(CS),制备了MS@SiO_2@CS磁性微球。利用扫描电镜及能量色散谱仪、热重分析仪、红外光谱仪、X射线衍射仪、振动样品磁强计对所得样品的结构和磁性进行了系统表征。结果表明,磁珠颗粒表面实现了逐层包覆,较均匀的分散于壳聚糖基体中,MS@SiO_2@CS微球的比饱和磁化强度可达7.04 emu·g~(-1)。Cu~(2+)离子吸附实验表明,所得磁性壳聚糖微球对Cu~(2+)具有良好的吸附能力,最大吸附量可达11.08 mg·g~(-1);而且可通过磁选法高效固液分离。吸附动力学研究表明,MS@SiO_2@CS微球对Cu~(2+)离子的吸附符合准二级动力学模型,以化学吸附为主。     

Adsorption of reactive brilliant red K-2BP on activated carbon developed from sewage sludge

Activated carbon was prepared from the sewage sludge of municipal wastewater treatment plant by chemical activation (activation reagent is ZnCl₂) and was used for the adsorption of dye (reactive brilliant red K-2BP). The impact of adsorbent amount, adsorption time and pH value on adsorption effect, the adsorption kinetics, and the adsorption thermodynamics were discussed according to batch adsorption tests. The results indicated that the activated carbon developed from sewage sludge (ACSS), which was mesoporous, possessed opened porous structures. The iodine number of the ACSS was 326 mg·g⁻¹. The rate of achievement was 51.31%. The BET surface area was 298 m²·g⁻¹ and the contents of heavy metals in the leachate didn’t exceed the contents limit. The adsorption kinetics of reactive brilliant red K-2BP on the ACSS was accorded with the two-step kinetics rate equation and pseudo-second-order kinetics equation. Compared to the Freundlich isotherm equation, the Langmuir isotherm equation showed better applicability for the adsorption. The adsorption which was favorable was an endothermic (enthalpy ΔH > 0) and spontaneous (free energy ΔG < 0) process and was accompanied by an increase in entropy (ΔS > 0). __________ Translated from Journal of Shandong University (Natural Science), 2007, 42(3): 64–70 [译自: 山东大学学报(理学版)]     

Removal and recovery of vanadium(V) by adsorption onto ZnCl2 activated carbon: Kinetics and isotherms

Adsorption of vanadium(V) from aqueous solution onto ZnCl₂ activated carbon developed from coconut coir pith was investigated to assess the possible use of this adsorbent. The influence of various parameters such as agitation time, vanadium concentration, adsorbent dose, pH and temperature has been studied. First, second order, Elovich and Bangham’s models were used to study the adsorption kinetics. The adsorption system follows second order and Bangham’s kinetic models. Langmuir, Freundlich, Dubinin-Radushkevich and Temkin isotherms have been employed to analyze the adsorption equilibrium data. Equilibrium adsorption data followed all the four isotherms—Langmuir, Freundlich, D-R and Temkin. The Langmuir adsorption capacity (Q ₀) was found to be 24.9 mg g^{− 1} of the adsorbent. The per cent adsorption was maximum in the pH range 4.0–9.0. The pH effect and desorption studies showed that ion exchange mechanism might be involved in the adsorption process. Thermodynamic parameters such as ΔG ⁰, ΔH ⁰ and ΔS ⁰ for the adsorption were evaluated. Effect of competitive anions in the aqueous solution such as PO₄ ^{3 −}, SO₄ ²⁻, ClO₄ ⁻, MoO₄ ²⁻, SeO₃ ²⁻, NO₃ ⁻ and Cl⁻ was examined. SEM and FTIR were used to study the surface of vanadium(V) loaded ZnCl₂ activated carbon. Removal of vanadium(V) from synthetic ground water was also tested. Results show that ZnCl₂ activated coir pith carbon is effective for the removal of vanadium(V) from water.     

Chemically modified kapok fiber for fast adsorption of Pb2+, Cd2+, Cu2+ from aqueous solution

Kapok fiber, a natural hollow fiber with thin shell and large cavity, has rarely been used as adsorbent for heavy metal ions. In this paper, kapok fibers were modified with diethylenetriamine pentaacetic acid (DTPA) after hydrophilicity treatment. The adsorption behavior of the resultant kapok-DTPA influenced by pH, adsorption time and initial concentration of metal ion was investigated. The results demonstrate that adsorption equilibrium was reached within 2 min for Pb²⁺ and Cd²⁺. Adsorption kinetics showed that the adsorption rate was well fitted by pseudo-second-order rate model. The adsorption isotherms were studied, and the best fit was obtained in the Langmuir model. The maximum adsorption capacities of kapok-DTPA were 310.6 mg g^?1 for Pb²⁺, 163.7 mg g^?1 for Cd²⁺, 101.0 mg g^?1 for Cu²⁺, respectively. After eight desorption and re-adsorption loops, the lost adsorption capacities for Pb²⁺ and Cu²⁺ were less than 10 %. Because of the large specific area derived from the hollow fiber structure, kapok-DTPA exhibited much better adsorption capacity compared with many other reported adsorbents based on natural materials.     

基于1,1’-二苯乙炔-3,3’,5,5’-四羧酸微孔铜配位聚合物的合成和气体吸附性质

本文报道了配合物[Cu2(EBTC)(H2O)2]·8H2O·DMF.DMSO(1,EBTC=1,1′-二苯乙炔-3,3′,5,5′-四羧酸根;DMF=N,N-二甲基甲酰胺;DMSO=二甲基亚砜)的合成、晶体结构和吸附性质。1拥有内径为0.85 nm和0.85 nm×2.15 nm的两种孔洞,分别被6个和12个四羧酸根桥联的[Cu2(CO2)4]螺旋桨式结构围绕,并被EBTC连接成三维超分子结构,该结构拥有可容纳溶剂分子的一维孔道。1为(3,4)-连接的fof(sqc1575)拓扑结构,具有非常大的孔体积,其值高达单位晶胞体积的72.8%。去除溶剂分子后的1a表现出永久孔性,其Langmuir表面积为2844 m2·g-1,BET表面积为1 852 m2·g-1。它对H2、CO2、CH4和C2H2具有可观的气体吸附量和相对较高的吸附焓。特别是,在迄今所有已报道的孔性金属-有机材料中,1a在273 K、1.0×105Pa下,表现出最高的乙炔吸附量(252 cm3·g-1)和很高的吸附焓(吸附量为1 mmol·g-1时的吸附焓为34.5 kJ·mol-1)。     

化学-微波法制备高膨胀率膨胀蛭石及对亚甲基蓝的吸附机理

基于工业蛭石优异的热膨胀性及阳离子交换性,利用化学-微波法制备高膨胀率膨胀蛭石(HEV),采用对比分析法对亚甲基蓝(MB)的吸附性能进行了研究。结果表明,HEV膨胀率高(膨胀率K=60倍),比表面积大(80 m^2·g^-1),孔径主要分布在2~5 nm之间,仍保持蛭石、水金云母和金云母的物相结构,阳离子交换容量由原样的0.835 mmol·g^-1增加到1.005 mmol·g^-1。HEV对MB的吸附容量受MB初始浓度、吸附时间、溶液pH和吸附温度影响。当MB溶液初始浓度为300 mg·L-1、吸附时间为240 min、溶液pH值为9、吸附温度为298 K时,吸附量为419.87 mg·g^-1,远高于蛭石原矿。吸附过程符合Langmuir模型与准二级动力学模型,为单分子层吸附和吸附势垒较低的自发无序吸热反应过程。HEV具有优异的阳离子交换性和吸附性,是一种具有开发价值的高效低成本吸附剂。