柱状Co3O4催化剂的乏风催化燃烧性能

通过两步法成功合成了由纳米粒子组装成的柱状Co₃O₄。第一步是通过简单的冷凝回流法合成柱状CoC₂O₄·2H₂O。第二步将所制备的柱状CoC₂O₄·2H₂O在350℃下煅烧2 h,使其分解形成Co₃O₄而不破坏原始形貌。通过粉末X射线衍射（PXRD）,X射线光电子能谱（XPS）,氮气吸附－脱附,扫描电镜（SEM）,高分辨率透射电子显微镜（HRTEM）和H₂程序升温还原（H₂-TPR）表征柱状Co₃O₄的物化性质。结果表明,柱状Co₃O₄对乏风甲烷燃烧的催化活性远远高于商业Co₃O₄。柱状Co₃O₄优异的催化性能可能归因于其表面较高的Co³⁺含量,较高的表面吸附氧和大量暴露的{111}晶面族。     

不同形貌Co3O4的制备及其活化过一硫酸盐降解亚甲基蓝的性能

分别采用尿素水热-煅烧法、化学浴沉积-煅烧法和草酸盐热解法制备出具有不同形貌的Co₃O₄（Co₃O₄-A、Co₃O₄-B和Co₃O₄-C） 粉体材料,对比了它们作为催化剂活化过一硫酸盐（PMS）降解亚甲基蓝（MB）的性能。结果表明,3种Co₃O₄材料均具有分级微/纳米结构,形貌分别呈绒球状、无规则颗粒状和纤维状。PMS在3种催化剂作用下的分解过程均符合一级反应动力学模型,反应速率常数依次为0.047 1、0.217 4和0.003 7 min^-1。无规则颗粒状Co₃O₄-B表现出最高的PMS活化性能,是其具有最大比表面积、最高表面氧空位浓度以及表面羟基密度综合作用的结果。在催化剂用量0.02 g·L^-1、PMS投加量0.6 mmol·L^-1的工艺参数条件下,Co₃O₄-B/PMS高级氧化体系在25 min内对MB的降解即可达98.33%。电子顺磁共振测试证实Co₃O₄-B/PMS高级氧化体系中存在·SO₄^-、·OH、·O₂^-和¹O₂四种活性氧物种,基于此提出了Co₃O₄-B活化PMS及降解MB的反应机理。     

Co3O4/ZnO修饰针灸针的制备及其在葡萄糖检测领域的应用

将Co₃O₄/ZnO针状纳米棒材料修饰到针灸针表面用于检测葡萄糖浓度的变化。首先采用水热法在针灸针表面得到 Co（CO₃）_0.5（OH）·0.11H₂O针状纳米棒前驱体,然后在500 ℃条件下退火3 h得到Co₃O₄针状纳米棒阵列。再采用浸渍法将预制备好的ZnO量子点修饰到Co₃O₄针状纳米棒表面,得到Co₃O₄/ZnO复合修饰的针灸针。研究发现此针灸针对葡萄糖具有较好的电流响应（2 264.27 μA·L·mmol^-1·cm^-2）、较快的响应速度（<4 s）及较低的检测极限（0.311 μmol·L^-1（S/N=3））。且该针灸针在用于检测人体模拟细胞液中葡萄糖浓度时,对抗坏血酸和尿素等表现出较强的抗干扰性。     

Co3O4/ZnO修饰针灸针的制备及其在葡萄糖检测领域的应用

将Co₃O₄/ZnO针状纳米棒材料修饰到针灸针表面用于检测葡萄糖浓度的变化。首先采用水热法在针灸针表面得到Co（CO₃）_0.5（OH）·0.11H₂O针状纳米棒前驱体,然后在500 ℃条件下退火3 h得到Co₃O₄针状纳米棒阵列。再采用浸渍法将预制备好的ZnO量子点修饰到Co₃O₄针状纳米棒表面,得到Co₃O₄/ZnO复合修饰的针灸针。研究发现此针灸针对葡萄糖具有较好的电流响应（2 264.27 μA·L·mmol^-1·cm^-2）、较快的响应速度（<4 s）及较低的检测极限（0.311 μmol·L^-1（S/N=3））。且该针灸针在用于检测人体模拟细胞液中葡萄糖浓度时,对抗坏血酸和尿素等表现出较强的抗干扰性。     

纳米片聚结Co3O4微球催化甲苯燃烧

采用乙二胺辅助的水热法制备了纳米片聚结的Co₃O₄微球. 利用多种分析技术表征了其物化性质,并评价了其对甲苯燃烧的催化活性. 结果表明,由添加1.0 ml乙二胺经140 ℃水热处理12 h后制得的Co₃O₄样品呈纳米片聚结的微球状表面形貌. Co₃O₄微球样品的比表面积约为66 m² g^-1. 与体相Co₃O₄样品相比,Co₃O₄微球样品具有较高的氧吸附物种浓度和较好的低温还原性. 当空速为20000 ml g^-1 h^-1时,在Co₃O₄微球样品上甲苯转化率达到50%和90%时的反应温度分别为230和254 ℃. 这与该样品具有较大的比表面积、较高的氧吸附物种浓度和较好的低温还原性相关.     

焙烧与预处理条件对 Co3O4 催化氧化 CO 性能的影响

采用沉淀法制备了 Co₃O₄, 考察了焙烧和预处理条件对其结构、低温催化氧化 CO 性能的影响. 热重分析表明, 未经焙烧的样品以 Co(OH)₂CO₃ 的形式存在, 150~400 ^oC 空气气氛中焙烧后, 样品以立方相 Co₃O₄ 的形式存在. N2 吸附-脱附法、X 射线衍射、透射电镜及活性测试结果表明, 以纳米颗粒物存在的 Co₃O₄ 的比表面积、颗粒尺寸、催化氧化 CO 活性与焙烧温度密切相关. 正电子湮没寿命谱、O₂-程序升温脱附与定温条件下 CO 氧化测试结果表明, 合适温度 (150~250 ^oC) 下 N₂ 预处理有利于 Co₃O₄ 表面氧空穴团的形成, 它在吸附活化分子氧以及 CO 催化氧化反应中起到关键作用. 同时讨论了预处理作用下Co₃O₄表面氧空穴的再构机制.     

铕掺杂对Co3O4活化过一硫酸盐降解亚甲基蓝性能的增强

以Co （NO₃）₂和Eu （NO₃）₃为原料,采用草酸盐-热分解法制得了系列不同Co/Eu比例（n_Co/n_Eu）的多孔双金属复合氧化物催化剂,并对其活化过一硫酸盐（PMS）降解亚甲基蓝（MB）的性能进行对比评价。结果表明,按n_Co/n_Eu=9制得的材料（Co₉Eu₁）具有最为优异的活化PMS降解MB的性能。在温度为25℃、催化剂用量和PMS浓度分别为0.10 g·L^-1和0.6 mmol·L^-1的反应条件下,Co₉Eu₁/PMS体系对MB的降解率可达86.66%,而纯Co₃O₄催化下的MB降解率仅为52.62%。Co₉Eu₁出色的催化性能是由于Eu³⁺的缺电子特性增强了对吸附于催化剂表面PMS的极化而使其更易被主催化成分Co₃O₄活化。体系中阴离子C₂O₄^2-和HCO₃^-的存在对Co₉Eu₁/PMS氧化降解MB的性能具有明显抑制作用。猝灭实验和电子顺磁共振谱（EPR）证实Co₉Eu₁/PMS体系中同时存在SO₄^-·、·OH和·O₂^-三种自由基型活性物种以及¹O₂非自由基型活性物种,其中SO₄^-·对MB的氧化降解起关键作用。Co₉Eu₁具有良好的稳定性,在连续4次循环使用中其催化性能未见明显变化。     

核壳结构的Co3O4@δ-MnO2/Pt作为锂氧电池高效催化正极

通过简易、可控的水热方法在泡沫镍基体上直接生长了核壳结构的阵列型Co₃O₄@δ-MnO₂/Pt正极。阵列电极有利于电极的润湿、氧气的传输和Li₂O₂的负载。Co₃O₄@δ-MnO₂/Pt正极对氧还原和氧析出反应具有高的催化性能,可促使Li₂O₂依附Co₃O₄@δ-MnO₂/Pt阵列生长,从而保持阵列结构。该生长行为有利于Li₂O₂在充电时分解。以Co₃O₄@δ-MnO₂/Pt为催化正极的锂氧电池显示出高的容量（在电流密度100 mA·g^-1时容量为2 480 mAh·g^-1）,以及长的循环寿命（容量限定在500 mAh·g^-1时,在200 mA·g^-1电流密度下,可循环65次）,该性能超过了使用Co₃O₄或Co₃O₄@δ-MnO₂催化剂的电池。     

双功能化磁性纳米修复剂对多重金属的快速、高效钝化行为

采用“一锅法”制备了四氧化三铁/半胱氨酸（Fe₃O₄/Cys）磁性纳米微球,随后对Fe₃O₄/Cys进行亚氨基二乙酸（IDA）修饰得到Fe₃O₄/Cys/IDA磁性双功能化纳米微球。研究发现Fe₃O₄/Cys中的L-Cys是通过—SH基团接枝到Fe₃O₄表面的,随后IDA分子中的羧基与Fe₃O₄/Cys中的—NH₂形成酰胺键,最终形成多支链多羧基的Fe₃O₄/Cys/IDA磁性纳米修复剂。基于修复剂表面短支链-长支链交替的多羧基结构,实现了羧基基团的高密度接枝。同时,Fe₃O₄/Cys/IDA磁性纳米微球对Pb²⁺、Cd²⁺、Cu²⁺、Co²⁺、Ni²⁺、Zn²⁺为专性吸附,而对Hg²⁺属于非专性吸附,且吸附重金属后得到的钝化产物均表现了良好的稳定性。另外,Fe₃O₄/Cys/IDA对重金属离子的吸附符合Langmuir模型,属于单层均相吸附,其吸附过程符合准二级动力学模型,最大吸附量为49.05 mg·g^-1。     

Mn4+掺杂Co3O4纳米纤维的静电纺丝法制备及其电化学性能

通过静电纺丝法制备Mn⁴⁺掺杂的Co₃O₄复合纳米纤维,利用XRD、XPS、BET、SEM和电化学工作站等对材料的结构、成分、形貌和电化学性能进行表征与测试。研究发现,通过Mn⁴⁺掺杂,Co₃O₄复合纳米纤维的电化学性能得到明显改善。当n_Co∶n_Mn=20∶2时,相应的复合纤维具有较大比表面积68 m²·g^-1,而且该样品呈现出清晰的氧化还原峰,在1 A·g^-1的电流密度下,放电比电容量为585 F·g^-1,这比纯Co₃O₄纳米纤维的416 F·g^-1,有显著提高;循环500圈电容保持率达到82.6%,而纯Co₃O₄纳米纤维则是76.4%。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.