Chemo‐ and Regioselective C(sp3)?H Arylation of Unactivated Allylarenes by Deprotonative Cross‐Coupling

The combination of aryl bromides, allylbenzene, base and a palladium catalyst usually results in a Heck reaction. Herein we combine these same reagents, but override the Heck pathway by employing a strong base. In the presence of LiN(SiMe₃)₂, allylbenzene derivatives undergo reversible deprotonation. Transmetalation of the resulting allyllithium intermediate to LPdAr(Br) and reductive elimination provide the 1,1‐diarylprop‐2‐enes, which are not accessible by the Heck reaction. The regioselectivity in this deprotonative cross‐coupling process is catalyst‐controlled and very high.     

N‐heterocyclic carbene–palladium(II) complex supported on magnetic mesoporous silica for Heck cross‐coupling reaction

Magnetic mesoporous silica was prepared via embedding magnetite nanoparticles between channels of mesoporous silica (SBA‐15). The prepared composite (Fe₃O₄@SiO₂‐SBA) was then reacted with 3‐chloropropyltriethoxysilane, sodium imidazolide and 2‐bromopyridine to give 3‐(pyridin‐2‐yl)‐1H‐imidazol‐3‐iumpropyl‐functionalized Fe₃O₄@SiO₂‐SBA as a supported pincer ligand for Pd(II). The functionalized magnetic mesoporous silica was further reacted with [PdCl₂(SMe₂)₂] to produce a supported N‐heterocyclic carbene–Pd(II) complex. The obtained catalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, vibrating sample magnetometry, Brunauer–Emmett–Teller surface area measurement and X‐ray diffraction. The amount of the loaded complex was 80.3 mg g^?1, as calculated through thermogravimetric analysis. The formation of the ordered mesoporous structure of SBA‐15 was confirmed using low‐angle X‐ray diffraction and transmission electron microscopy. Also, X‐ray photoelectron spectroscopy confirmed the presence of the Pd(II) complex on the magnetic support. The prepared magnetic catalyst was then effectively used in the coupling reaction of olefins with aryl halides, i.e. the Heck reaction, in the presence of a base. The reaction parameters, such as solvent, base, temperature, amount of catalyst and reactant ratio, were optimized by choosing the coupling reaction of 1‐bromonaphthalene and styrene as a model Heck reaction. N‐Methylpyrrolidone as solvent, 0.25 mol% catalyst, K₂CO₃ as base, reaction temperature of 120°C and ultrasonication of the catalyst for 10 min before use provided the best conditions for the Heck cross‐coupling reaction. The best results were observed for aryl bromides and iodides while aryl chlorides were found to be less reactive. The catalyst exhibited noticeable stability and reusability.     

Silica‐coated nano‐Fe3O4‐supported iminopyridine palladium complex as an active,phosphine‐free and magnetically separable catalyst for Heck reactions

A novel magnetic nanoparticle‐supported iminopyridine palladium complex was successfully prepared by attaching palladium acetate to iminopyridine ligand‐functionalized silica‐coated nano‐Fe₃O₄. The as‐prepared catalyst was well characterized and was evaluated in Heck reactions in terms of activity and recyclability. It was found to be highly efficient for the reactions of various aryl iodides and aryl bromides having electron‐withdrawing groups with olefins under phosphine‐free and inert atmosphere‐free conditions. Moreover, the catalyst could be conveniently recovered using an external magnet, and the recyclability was influenced by the base in the Heck reaction. The catalyst could be reused at least six times with no significant loss in activity when triethylamine acted as the base.     

Magnetically‐recoverable Schiff Base Complex of Pd (II) Immobilized on Fe3O4@SiO2 Nanoparticles: An Efficient Catalyst for Mizoroki‐Heck and Suzuki‐Miyaura Coupling Reactions

The activity of Pd(II)‐Schiff base complex molecules grafted on the surface of Fe₃O₄@SiO₂ particles were investigated in the palladium‐catalyzed coupling reactions of aryl halides with alkenes (Mizoroki‐Heck reaction) and phenylboronic acids (Suzuki‐Miyaura reaction) in the absence of phosphorous ligands. This method shows notable advantages such as heterogeneous nature of the catalyst, excellent yields, short reaction times, easy preparation, simplicity of operation, and cleaner reaction profiles. The catalyst can be separated from the reaction mixture by applying a permanent magnet externally and can be reused for several times without significant loss of activity. Also, the amount of palladium leaching has been determined by ICP analysis.     

The Design and Synthesis of Novel 2,3‐Dihydrobenzo[f]isoquinolin‐4(1H)‐ones via Sequential Ugi–Heck Reactions by Using an Efficient Heterogeneous Palladium Nanocatalyst

A facile and efficient synthesis of N‐alkyl‐2‐(1, 2 dihydro‐1‐methylene‐4‐oxobenzo[f] isoquinoline‐3(4H)‐yl)‐2‐phenylacetamides is performed by the consecutive, two‐step procedure that consists of Ugi and Heck reactions. The Heck reaction was performed both by homogenous and a designed heterogeneous catalyst. The heterogeneous catalyst is a coordinated palladium to 1, 10‐phenanthroline attached to chitosan@Fe3O4 magnetite nanoparticles, which was shown to be more efficient than the homogenous Pd(OAc)₂/PPh₃ catalyst with good to excellent yields.     

Palladium supported on silica–chitosan hybrid material (Pd‐CS@SiO2) for Suzuki–Miyaura and Mizoroki–Heck cross‐coupling reactions

Palladium supported on silica–chitosan hybrid material was prepared and characterized using thermogravimetric and differential thermogravimetric analyses, scanning electron microscopy, and Fourier transform infrared, energy‐dispersive X‐ray and X‐ray photoelectron spectroscopies. The prepared Pd‐CS@SiO₂ catalyst (1 mol%) was used for the Suzuki–Miyaura cross‐coupling reaction of various aryl halides and arylboronic acids in 95% ethanol at 80 °C and the Mizoroki–Heck reaction in dimethylformamide at 110 °C using K₂CO₃ as a base. The developed catalyst is well suitable for the 3R approach (recoverable, robust, recyclable) for cross‐coupling reactions without appreciable loss of its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Ligand‐free palladium‐catalyzed tandem pathways for the synthesis of 4,4‐diarylbutanones and 4,4‐diaryl‐3‐butenones under microwave conditions

Two efficient Pd‐catalyzed tandem pathways for the synthesis of 4,4‐diaryl‐2‐butanones and 4,4‐diaryl‐3‐buten‐2‐ones were elaborated. The first step in both procedures was the Heck coupling of methyl vinyl ketone (MVK) and various aryl iodides leading to 4‐aryl‐3‐buten‐2‐one with the yield of up to 92% in 1 hr. The second step performed with the same catalyst and a new portion of aryl iodide in the presence K₂CO₃ as a base produced 4,4‐diaryl‐3‐buten‐2‐ones in high yield. Reaction selectivity changed completely to saturated 4,4‐diaryl‐2‐butanones, reductive Heck products, when a tertiary amine was used instead of K₂CO₃. Due to the application of microwave irradiation (MW), the desired products were obtained in high yield in a short time (4 hr), using 0.5 mol% of the Pd (OAc)₂ catalyst without additional ligands.     

The synthesis of non‐symmetrical stilbene analogs of trans‐resveratrol using the same Pd catalyst in a sequential double‐Heck arylation of ethylene

We have developed a sequential and selective Pd‐catalyzed double‐Heck arylation of ethylene that results in non‐symmetrical nitro‐stilbene analogs of trans‐resveratrol at excellent yields. A catalytic system consisting of Pd(OAc)₂ and P(o‐tolyl)₃ permitted us to carry out the two consecutive Heck arylations without losing activity from the first to the second Heck reaction. After the first Heck arylation of ethylene, no isolation or additional catalyst loading is required for the second Heck arylation reaction. This protocol was applied to the synthesis of methylated trans‐resveratrol, which was obtained at a 65% overall yield. Copyright © 2011 John Wiley & Sons, Ltd.     

Accelerated Heck reaction using ortho‐palladated complex with controlled microwave heating

Palladium‐catalyzed Heck couplings utilizing [Pd{C₆H₂(CH₂CH₂NH₂)‐(OMe)₂,3,4} (µ‐Br)]₂ palladacycle catalyst and microwave irradiation lead to formation of different coupling products. This complex is an active and efficient catalyst for the Heck reaction of aryl iodides, bromides and even less reactive chlorides. The cross‐coupled products were produced in excellent yields. The reaction time was reduced from hours to minutes and full conversion was achieved under microwave irradiation. Copyright © 2009 John Wiley & Sons, Ltd.     

Palladium–S‐propyl‐2‐aminobenzothioate immobilized on Fe3O4 magnetic nanoparticles as catalyst for Suzuki and Heck reactions in water or poly(ethylene glycol)

A moisture‐ and air‐stable heterogenized palladium catalyst was synthesized by coordination of palladium with S‐propyl‐2‐aminothiobenzamide supported on Fe₃O₄ magnetic nanoparticles. The prepared nanocatalyst was characterized using Fourier transform infrared, energy‐dispersive X‐ray and inductively coupled plasma atomic emission spectroscopies, X‐ray diffraction, vibrating sample magnetometry, transmission and scanning electron microscopies, dynamic laser scattering and thermogravimetric analysis. This catalyst could be dispersed homogeneously in water or poly(ethylene glycol) and further applied as an excellent nano‐organometal catalyst for Suzuki and Heck reactions. The catalyst was easily separated with the assistance of an external magnet from the reaction mixture and reused for several consecutive runs without significant loss of its catalytic efficiency or palladium leaching. The leaching of catalyst was examined using hot filtration and inductively coupled plasma atomic emission spectroscopy. Also, the effects of various reaction parameters on the Suzuki and Heck reactions are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Heck coupling reaction using monomeric ortho‐palladated complex of 4‐methoxy‐ benzoylmethylenetriphenylphosphorane under microwave irradiation

The activity of [Pd(C₆H₄CH₂ NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex, A (MOBPPY = 4‐methoxybenzoylmethylenetriphenyl‐ phosphoraneylide), was investigated in the Heck–Mizoroki C? C cross‐coupling reaction under conventional heating and microwave irradiation conditions. The complex is an active and efficient catalyst for the Heck reaction of aryl halides. The yields were excellent using a catalytic amount of [Pd(C₆H₄CH₂ NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex in N‐methyl‐2‐pyrrolidinone (NMP) at 130 °C and 600 W. In comparison to conventional heating conditions, the reactions under microwave irradiation gave higher yields in shorter reaction times. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Investigation of Mizoroki‐Heck coupling polymerization as a catalyst‐transfer condensation polymerization for synthesis of poly(p‐phenylenevinylene)

Mizoroki‐Heck coupling polymerization of 1,4‐bis[(2‐ethylhexyl)oxy]‐2‐iodo‐5‐vinylbenzene ( 1 ) and its bromo counterpart 2 with a Pd initiator for the synthesis of poly(phenylenevinylene) (PPV) was investigated to see whether the polymerization proceeds in a chain‐growth polymerization manner. The polymerization of 1 with ^tBu₃PPd(Tolyl)Br ( 10 ) proceeded even at room temperature when 5.5 equiv of Cy₂NMe (Cy = cyclohexyl) was used as a base, but the molecular weight distribution of PPV was broad. The polymerization of 2 hardly proceeded at room temperature under the same conditions. In the polymerization of 1 , PPV with H at one end and I at the other was formed until the middle stage, and the polymer end groups were converted into tolyl and H in the final stage. The number‐average molecular weight (M_n) did not increase until about 90% monomer conversion and then sharply increased after that, indicating conventional step‐growth polymerization. The occurrence of step‐growth polymerization, not catalyst‐transfer chain‐growth polymerization, may be interpreted in terms of low coordination ability of H‐Pd(II)‐X(^tBu₃P) (X = Br or I), formed in the catalytic cycle of the Mizoroki‐Heck coupling reaction, to π‐electrons of the PPV backbone; reductive elimination of H‐X from this Pd species with base would take place after diffusion into the reaction mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 543–551     

Room‐Temperature,Ligand‐ and Base‐Free Heck Reactions of Aryl Diazonium Salts at Low Palladium Loading: Sustainable Preparation of Substituted Stilbene Derivatives

The Pd(OAc)₂‐catalyzed Heck reaction of aryl diazonium salts with 2‐arylacrylates led to cis‐stilbenes with good to excellent stereoselectivity. The environmentally friendly protocol developed in this work features low palladium loading in technical‐grade methanol at room temperature under base‐, additive‐, and ligand‐free conditions. The same protocol applied to simple Heck coupling of aryl diazonium salts with methyl acrylate allows astonishingly low palladium loading, down to 0.005 mol %. The stereoselectivity experimentally observed for the synthesis of cis‐stilbenes has been rationalized by DFT calculations. Moreover, the role of methanol in promoting the reaction has been clarified by a computational study.     

Accelerated Heck reaction using ortho‐palladated complex in a nonaqueous ionic liquid with controlled microwave heating

The activity of {Pd[C₆H₂(CH₂CH₂NH₂)‐(OMe)₂,3,4] (µ‐Br)}₂ complex was investigated in the Heck–Mizoroki C C cross‐coupling reaction under conventional heating and microwave irradiation conditions in molten salt tetrabutylammonium bromide as the solvent and promoter at 130 °C. This complex in these conditions is an active and efficient catalyst for the Heck reaction of aryl iodides, bromides and even chlorides, and also arenesulfonyl chlorides. Copyright © 2011 John Wiley & Sons, Ltd.     

Pd(0)‐ S‐propyl‐2‐aminobenzothioate immobilized onto functionalized magnetic nanoporous MCM‐41 as efficient and recyclable nanocatalyst for the Suzuki,Stille and Heck cross coupling reactions

The present work describes the use of Pd(0)‐ S‐propyl‐2‐aminobenzothioate Complex immobilized onto functionalized magnetic nanoporous MCM‐41(Fe₃O₄@MCM‐41@Pd‐SPATB) as efficient and recyclable nano‐organometallic catalyst for C–C bond formation between various aryl halides with phenylboronic acid (Suzuki reaction), aryl halides with triphenyltin chloride (Stille reaction), and aryl halides with n‐butyl acrylate (Heck reaction). All the reactions were carried out in PEG‐400 as green solvent with short reaction time and good to excellent yields. This catalyst was characterized by FT‐IR spectroscopy, XRD, TGA, VSM, ICP‐OES, TEM, EDX and SEM techniques. Ease of operation, high efficiency, recovery and reusability for five continuous cycles without significant loss of its catalytic activities or metal leaching are the noteworthy features of the currently employed heterogeneous catalytic system.     

Ethylene/α‐olefin copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Copolymerizations of ethylene with α‐olefins (i.e., 1‐hexene, 1‐octene, allylbenzene, and 4‐phenyl‐1‐butene) using the bis(β‐enaminoketonato) titanium complexes [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = Ph, R₂ = CF₃; and 1c : R₁ = t‐Bu, R₂ = CF₃), activated with modified methylaluminoxane as a cocatalyst, have been investigated. The catalyst activity, comonomer incorporation, and molecular weight, and molecular weight distribution of the polymers produced can be controlled over a wide range by the variation of the catalyst structure, α‐olefin, and reaction parameters such as the comonomer feed concentration. The substituents R₁ and R₂ of the ligands affect considerably both the catalyst activity and comonomer incorporation. Precatalyst 1a exhibits high catalytic activity and produces high‐molecular‐weight copolymers with high α‐olefin insertion. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6323–6330, 2005     

Synthesis and characterization of a novel magnetic nano‐palladium Schiff base complex: application in cross‐coupling reactions

A novel and task‐specific nano‐magnetic Schiff base ligand with phosphate spacer using 2‐aminoethyl dihydrogen phosphate instead of usual coating agents, i.e. tetraethoxysilane and 3‐aminopropyltriethoxysilane, for coating of nano‐magnetic Fe₃O₄ is introduced. The nano‐magnetic Schiff base ligand with phosphate spacer as a novel catalyst was synthesized and fully characterized using infrared spectroscopy, X‐ray diffraction, scanning and transmission electron microscopies, thermogravimetry, derivative thermogravimetry, vibrating sample magnetometry, atomic force microscopy, X‐ray photoelectron spectroscopy and energy‐dispersive X‐ray spectroscopy. The resulting task‐specific nano‐magnetic Schiff base ligand with phosphate spacer was successfully employed as a magnetite Pd nanoparticle‐supported catalyst for Sonogashira and Mizoroki–Heck C–C coupling reactions. To the best of our knowledge, this is the first report of the synthesis and applications of magnetic nanoparticles of Fe₃O₄@O₂PO₂(CH₂)₂NH₂ as a suitable spacer for the preparation of a designable Schiff base ligand and its corresponding Pd complex. So the present work can open up a new and promising insight in the course of rational design, synthesis and applications of various task‐specific magnetic nanoparticle complexes. Copyright © 2016 John Wiley & Sons, Ltd.     

Application of Pd‐2A3HP‐MCM‐41 to the Suzuki,Heck and Stille coupling reactions and synthesis of 5‐substituted 1H‐tetrazoles

An ecofriendly heterogeneous catalyst has been synthesized by anchoring palladium onto the surface of organically modified mesoporous silica. The prepared catalyst was characterized using X‐ray diffraction, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, transmission and scanning electron microscopies, inductively coupled plasma and thermogravimetric techniques. The catalyst shows high activity in the Suzuki, Heck and Stille cross‐coupling reactions and the synthesis of 5‐substituted 1H‐tetrazoles from sodium azide (NaN₃). These methods have the advantages of high yields, green reaction conditions, simple methodology and easy separation and workup. Copyright © 2016 John Wiley & Sons, Ltd.     

Heck‐Type Reactions of Imine Derivatives: A DFT Study

The mechanism of a recently discovered intramolecular Heck‐type coupling of oximes with aryl halides (Angew. Chem. Int. Ed. 2007 , 46, 6325) was systematically studied by using density functional methods enhanced with a polarized continuum solvation model. The overall catalytic cycle of the reaction was found to consist of four steps: oxidative addition, migratory insertion, β‐H elimination, and catalyst regeneration, whereas an alternative base‐promoted C? H activation pathway was determined to be less favorable. Migratory insertion was found to be the rate determining step in the catalytic cycle. The apparent activation barrier of migratory insertion of the (E)‐oxime was +20.5 kcal mol^?1, whereas the barrier of (Z)‐oxime was as high as +32.7 kcal mol^?1. However, (Z)‐oxime could isomerize to form the more active (E)‐oxime with the assistance of K₂CO₃, so that both the (E)‐ and (Z)‐oxime substrates could be transformed to the desired product. Our calculations also indicated that the Z product was predominant in the equilibrium of the isomerization of the imine double bond, which constituted the reason for the good Z‐selectivity observed for the reaction. Furthermore, we examined the difference between the intermolecular Heck‐type reactions of imines and of olefins. It was found that in the intermolecular Heck‐type coupling of imines, the apparent activation barrier of migratory insertion was as high as +35 kcal mol^?1, which should be the main obstacle of the reaction. The analysis also revealed the main problem for the intermolecular Heck‐type reactions of imines, which was that the breaking of a C?N π bond was much more difficult than the breaking of a C?C π bond. After systematic examination of a series of substituted imines, (Z)‐N‐amino imine and N‐acetyl imine were found to have relatively low barriers of migratory insertion, so that they might be possible substrates for intermolecular Heck‐type coupling.     

Guanidine‐Functionalized Resin‐Supported Pd(0) Catalyst: Activity,Reusability, and Redeposition of Active Pd Species in Heck Vinylation

The guanidine‐functionalized resin‐supported Pd(0) catalyst [GDR·Pd(0)] is highly active in Heck reaction of aryl bromides with acrylic acid or styrene without the need to exclude air. The catalyst can be recycled at least 9 times without significant loss of activity in N‐methyl‐2‐pyrrolidone at 140 °C. The Heck reaction proceeds homogeneously with dissolved palladium species and the dissolved active palladium species can redeposit onto the surface of catalyst in the reaction. The XRD peak shifting of Pd phases in the catalyst provides the evidence for the re‐deposition of the active palladium species.