Structural and electronic phase transitions in Sr1−xCexMnO3 perovskites

The structures of eight members of the series Sr_1−xCe_xMnO₃ with 0.075?x?0.4 have been established using synchrotron X-ray powder diffraction. These exhibit the sequence of structures

     

Structural characterisation of the perovskite series SrxCa1−x−yNdyMnO3: Influence of the Jahn-Teller effect

The crystal structures of the perovskite manganites Sr_xCa_1−x−yNd_yMnO₃ with y=0.1 or 0.2 have been investigated using synchrotron X-ray powder diffraction. At room temperature the structures change from depending on the cation distribution, the different structures exhibiting different tilts of the MnO₆ octahedra. High temperature diffraction measurements demonstrate the presence of, an apparently continuous, isosymmetric I4/mcm to I4/mcm phase transition associated with the removal of long range orbital ordering. Heating the manganites to still higher temperatures results in a continuous transition to the cubic structure. A feature of such transitions is the continuous evolution of the octahedral tilt angle through the I4/mcm to I4/mcm phase transition. The orthorhombic structures do not exhibit orbital ordering and although a first order transition to the tetragonal structure is observed in Sr_0.4Ca_0.5Nd_0.1MnO₃, this high temperature tetragonal structure does not exhibit orbital ordering.     

Synthesis, structure and electric studies for La0.7A0.3Mn0.96(InxAl(1−x))0.04O3; A=Ca and Sr perovskites

Two polycrystalline series of samples in the form La_0.7A_0.3Mn_0.96(In_xAl_(1−x))_0.04O₃; A=Ca and Sr with (0.0?x?1.0) were synthesized using solid-state reaction. Rietveld analysis of the X-ray powder diffraction showed that, the Ca-series has an orthorhombic unit cell (space group Pnma) and the Sr-series is rhombohedral with (space group ). Structural parameters (refined lattice parameters, atom positions, bond distance, bond angles, valence sum, valence bond, bond lengths and bond angles) are reported and discussed as a function of In content for the two series. Resistivity measurements in zero field are carried out in the range 50-300 K for the Ca-series and in the range 300-400 K for the Sr-series. The obtained transition temperature T_ρ at which the metal-semiconducting (MS) occurred, is discussed as a function of the compositional parameter x.     

From ordered antiferromagnet to spin glass: A new phase Mn4Ir7−xMnxGe6

A new ternary phase, Mn₄Ir_7−xMn_xGe₆ (0?x?1.3), was studied by X-ray and neutron powder diffraction and SQUID magnetometry. The crystal structure is cubic, of the U₄Re₇Si₆ type, space group , Z=2, with the lattice parameter at 295 K. Within the limited range of homogeneity small variations of the composition yield dramatic changes of the magnetic structure. For x=0 long-range antiferromagnetic order is formed below the transition temperature 228 K, with large magnetic moments on Mn, 4.11(9) μ_B at 10 K, in a magnetic unit cell , c_M=2a_C. In contrast, for x=1.3 spin glass behavior is observed below 90 K. The Mn atoms form an ideal cubic framework, on which geometric frustration of competing nearest and next nearest neighbor antiferromagnetic interactions is suggested to explain the composition sensitive magnetic properties. A TiNiSi-type phase, IrMnGe, is found in samples of 1:1:1 composition quenched from the melt.     

Independent structural and valence state transitions in the cation-ordered double perovskites Ba2−xSrxTbIrO6

Synchrotron X-ray and neutron powder diffraction were used to investigate the formation, structure and bonding in the double perovskite Ba_2−xSr_xTbIrO₆ solid solutions. The results showed that these oxides all exhibit ordering of the Tb and Ir cations in a double perovskite-type structure. Three distinct structural types differing in symmetry and/or valence states were formed depending on the precise Ba:Sr ratio on the perovskite A site; x?0.3 cubic () with Tb⁴⁺ and Ir⁴⁺; 0.4?x?1.0 cubic () with Tb³⁺ and Ir⁵⁺ and x?1.2 monoclinic (P2₁/n) with Tb³⁺ and Ir⁵⁺. The transitions between these appear to be first order in nature.     

Synthesis, structures and phase transitions in the double perovskites Sr2−xCaxCrNbO6

The synthesis and crystal structures of nine members of the rock-salt ordered double perovskites Sr_2−xCa_xCrNbO₆ is presented. The crystal structures of the end members of the series Sr₂CrNbO₆ and Ca₂CrNbO₆ were refined using powder neutron diffraction data and are cubic in and monoclinic in P2₁/n, respectively, in both cases there being considerable anti-site Cr-Nb mixing. Variable temperature and/or composition studies suggest a direct first-order P2₁/n to transition, a suggestion supported by selected area electron diffraction studies.     

The Al stabilized phase Li3−3xAlxBO3

The structure of an Al³⁺ stabilized phase Li_3−3xAl_xBO₃ (x≈0.18) was determined by means of single crystal X-ray diffraction. This phase crystallizes in space group P6₁22 or P6₅22, with lattice constants , and Z=6. The unit cell consists of six layers of BO₃ groups with Li⁺ cations distributing statistically on five crystallographic sites, none of which is fully occupied. The Li sites are close to each other and a three-dimensional network results when Li sites only within 1.65 Å are connected. Significant ionic conductivity was observed for this phase.     

Influence of the structure on electric and magnetic properties of La0.8Na0.2Mn1−xCoxO3 perovskites

The influence of the cobalt substitution for manganese ions in the mixed valence perovskites La_0.8Na_0.2Mn_1−xCo_xO₃ (0?x?0.2) was investigated by X-ray, electric transport and magnetic measurements. The study carried out on sintered polycrystalline samples revealed the rhombohedral () structure and the insulator-metal transition connected with a ferromagnetic arrangement in the whole concentration range. Increasing concentration of cobalt ions leads to a gradual decrease of PM-FM and I-M transition temperatures. An influence of the cobalt ions on the observed behavior is attributed to charge compensation Mn³⁺→Mn⁴⁺ leading to the formation of stable couples Mn⁴⁺-Co²⁺. Therefore the double-exchange interactions Mn³⁺-O²⁻-Mn⁴⁺ partly vanish and they are replaced by positive superexchange interactions Mn⁴⁺-O²⁻-Co²⁺, but of a semiconducting character.     

Lanthanum pyrochlores and the effect of yttrium addition in the systems La2−xYxZr2O7 and La2−xYxHf2O7

The crystal structures of the compounds La_2−xY_xZr₂O₇ and La_2−xY_xHf₂O₇ with x=0.0, 0.4, 0.8, 1.2, 1.6, and 2.0 have been studied using neutron powder diffraction and electron microscopy to determine the stability fields of the pyrochlore and fluorite solid solutions. The limits of pyrochlore stability in these solid solutions are found to be close to La_0.8Y_1.2Zr₂O₇ and La_0.4Y_1.6Hf₂O₇, respectively. In both systems the unit cell parameter is found to vary linearly with Y content across those compositions where the pyrochlore phase is stable, as does the x-coordinate of the oxygen atoms on the 48f (x,,) sites. In both systems, linear extrapolations of the pyrochlore data suggest that the disordering is accompanied by a small decrease in the lattice parameter of approximately 0.4%. After the pyrochlore solid solution limit is reached, a sharp change is observed from x∼0.41 to 0.375 as the disordered defect fluorite structure is favoured. Electron diffraction patterns illustrate that some short-range order remains in the disordered defect fluorite phases.     

Crystal structures and polymorphism in compounds Bi6+xT1−xP2O15+y, T=first row transition metals and Pb

The compounds Bi_6+xT_1−xP₂O_15+y, T=Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn and Pb display five polymorphic forms. Polymorph A is formed by the Ti, Mn, Fe and Ni phases. Polymorph B is exhibited by Co and Cu compounds. The Cr phase crystallizes as polymorphic form C and the Zn phase crystallizes as polymorph D. The Pb compound crystallizes in a new structure type designated as polymorph E. The transition metal crystal structures demonstrate a similar motive. OBi₄ tetrahedra share edges to form two-dimensional Bi₂O₂ layers that are spanned by PO₄ tetrahedra and TO_6−y octahedra, pyramids and a trigonal bipyramid to form a three-dimensional network. Polymorph A crystallizes in space group C2; polymorph B is centrosymmetric with space group C2/c, the unit cell parameters differ and the unit cell volume is about double. Polymorph C crystallizes in space group and polymorph D exhibits space group C2. Bi_6.4Pb_0.6P₂O_15.2 can be considered as polymorph E, space group C2, with a new crystal structure but related stoichiometry.     

REAuAl4Ge2 and REAuAl4(AuxGe1−x)2 (RE=rare earth element): Quaternary intermetallics grown in liquid aluminum

The two families of intermetallic phases REAuAl₄Ge₂ (1) (RE=Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er, Tm and Yb) and REAuAl₄(Au_xGe_1−x)₂ (2) (x=0.4) (RE=Ce and Eu) were obtained by the reactive combination of RE, Au and Ge in liquid aluminum. The structure of (1) adopts the space group R-3m (CeAuAl₄Ge₂, , ; NdAuAl₄Ge₂, , ; GdAuAl₄Ge₂, , ; ErAuAl₄Ge₂, , ). The structure of (2) adopts the tetragonal space group P4/mmm with lattice parameters: , for EuAuAl₄(Au_xGe_1−x)₂ (x=0.4). Both structure types present slabs of “AuAl₄Ge₂” or “AuAl₄(Au_xGe_1−x)₂” stacking along the c-axis with layers of RE atoms in between. Magnetic susceptibility measurements indicate that the RE atoms (except for Ce and Eu) possess magnetic moments consistent with +3 species. The Ce atoms in CeAuAl₄Ge₂ and CeAuAl₄(Au_xGe_1−x)₂ (x=0.4) appear to be in a mixed +3/+4 valence state; DyAuAl₄Ge₂ undergoes an antiferromagnetic transition at 11 K and below this temperature exhibits metamagnetic behavior. The Eu atoms in EuAuAl₄(Au_xGe_1−x)₂ (x=0.4) appear to be in a 2+ oxidation state.     

Defect structure of Sb2−xFexTe3 single crystals

Single crystals of Sb_2−xFe_xTe₃ (c_Fe=0-9.5×10¹⁹ cm⁻³) were prepared by Bridgman method. The interpretation of the reflection spectra in plasma resonance region indicates that Fe increases the concentration of holes (acceptor) and each Fe atom incorporated in Sb₂Te₃ structure liberates 0.4-0.5 hole. Observed effect is elucidated by means of point defect model. According to the model Fe atoms enter the structure and form uncharged substitutional defects . Since this defect cannot affect the free-carrier concentration directly, we assume an interaction of the entering Fe-atoms with natives defects leading to a rise in the concentration of antisite defects , to a decrease of concentration, and to an increase in the concentration of holes.     

The crystal structure of the new ternary antimonide Dy3Cu20+xSb11−x (x≈2)

New ternary antimonide Dy₃Cu_20+xSb_11−x (x≈2) was synthesized and its crystal structure was determined by direct methods from X-ray powder diffraction data (diffractometer DRON-3M, CuKα-radiation, R_I=6.99%,R_p=12.27%,R_wp=11.55%). The compound crystallizes with the own cubic structure type: space group , Pearson code cF272, . The structure of the Dy₃Cu₂₀Sb_11−x (x≈2) can be obtained from the structure type BaHg₁₁ by doubling of the lattice parameter and subtraction of 16 atoms. The studied structure was compared with the structures of known compounds, which crystallize in the same space group with similar cell parameters.     

X-ray powder diffraction and electron diffraction studies of the Ni1±yGe1−xPx system

The wide-range of non-stoichiometric NiAs-type solid solution Ni_1±yGe_1−xP_x has been studied by means of X-ray powder and electron diffraction. The incommensurately modulated structure of Ni(Ge, P) has been found to exist over a wide compositional range which is limited by the end points ≈NiGe_0.8P_0.2 and NiGe_0.3P_0.7 so that the general stoichiometry might be referred to as NiGe_1−xP_x with 0.2?x?0.7. The modulation wave vector is of the type and its modulus is strongly composition dependent. A possible interpretation is given as a “soft transition”, via an incommensurately modulated structure, between the MnP and the NiP structure types, based on the almost purely displacive origin of the distortion. Further, the crystal structures of Ni₅Ge₂P₃ and Ni₂GeP seem to be commensurate approximations of the incommensurate modulated structure of Ni(Ge, P).     

Synthesis and electrical conductivity of perovskite-type PrCo1−xMgxO3

Oxides in the system PrCo_1−xMg_xO₃ (x=0.0, 0.05, 0.10, 0.15, 0.20, 0.25) were synthesized by citrate technique and characterized by powder X-ray diffraction and scanning electron microscope. All compounds have a cubic perovskite structure (space group ). The maximum ratio of doped Mg in the system PrCo_1−xMg_xO₃ is x=0.2. Further doping leads to the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃. The substitution of Mg for Co improves the performance of PrCoO₃ as compared to the electrical conductivity measured by a four-probe electrical conductivity analyzer in the temperature range from 298 to 1073 K. The substitution of Mg for Co on the B site may be compensated by the formations of Co⁴⁺ and oxygen vacancies. The electrical conductivity of PrCo_1−xMg_xO₃ oxides increases with increasing x in the range of 0.0-0.2. The increase in conductivity becomes considerable at the temperatures ?673 K especially for x?0.1; it reaches a maximum at x=0.2 and 1073 K. From x>0.2 the conductivity of PrCo_1−xMg_xO₃ starts getting lower. This is probably a result of the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃ , which blocks oxygen transport, and association of oxygen vacancies. A change in activation energy for all PrCo_1−xMg_xO₃ compounds (x=0-0.25) was observed, with a higher activation energy above 573 K and a lower activation energy below 573 K. The reasons for such a change are probably due to the change of dominant charge carriers from Co⁴⁺ to Vö in PrCo_1−xMg_xO₃ oxides and a phase transition mainly starting at 573 K.     

Transport, magnetic, internal friction, and Young's modulus in the Y-doped manganites La0.9−xYxTe0.1MnO3

The resistivity, magnetization, internal friction, and Young's modulus for the polycrystalline samples La_0.9−xY_xTe_0.1MnO₃ (x=0, 0.05, 0.10 and 0.15) have been investigated. All samples have rhombohedral crystallographic structure with the space group . The Curie temperature T_C of the studied samples decreases with increasing Y-doping level. For the samples with x=0,0.05 and 0.10, the temperature dependence of the resistivity ρ(T) exhibits two metal-insulator transitions (MIT) at T_p1 (which is close to its Curie temperature T_C) and T_p2 (which is below T_p1). When the doping level to 0.15, these two MIT temperatures are suppressed and an upturn at low temperatures below T* is observed from the ρ(T) curve. A change of Young's modulus E is observed in the vicinity of T_C accompanied by a broad peak of the internal friction Q⁻¹ for all studied samples. The values of the relative Young's modulus ΔE increase with increasing Y-doping level at the low temperatures. These results are discussed in terms of the local Jahn-Teller (JT) distortion by the substitution of smaller Y³⁺ ions for larger La³⁺ ions and the increased bending of the Mn-O-Mn bond with decreasing the average ionic radius of the A-site element 〈r_A〉 and the tolerance factor t, resulting in the narrowing of the bandwidth, the decrease of the mobility of e_g electrons and the weakening of double-exchange (DE) interaction.     

Neutron diffraction study of the crystal structure and structural phase transition of La0.7Ca0.3−xSrxCrO3 (0≤x≤0.3): The relationship between thermodynamic behavior and crystal structure changes at the phase transition

The crystal structure of the La_0.7Ca_0.3−xSr_xCrO₃ series, including the compositional and temperature dependence of the structural parameters, has been studied by variable temperature neutron diffraction measurements. The extent of the distortions from the ideal cubic perovskite structure has been evaluated quantitatively using the average bond lengths and the mean volumes of the [CrO₆] octahedron and [(La/Ca/Sr)O₁₂] polyhedron, and has been shown to decrease with increase of Sr content or temperature. At the structural phase transition from the orthorhombic (Pnma) structure to the rhombohedral one, the volume of the [CrO₆] octahedron decreases whereas that of the [(La/Ca/Sr)O₁₂] polyhedron shows little difference, resulting in an overall decrease in the level of distortion. The change in the degree of distortion at the phase transition decreases with increase of Sr content, in agreement with the smaller variation of the enthalpy and volume for the specimens with higher Sr content.     

Formation of crystalline TiO2−xNx and its photocatalytic activity

Amorphous precursors to nitrogen-doped TiO₂ (NTP) and pure TiO₂ (ATP) powders were synthesized by hydrolytic synthesis and sol-gel method (SGM), respectively. Corresponding crystalline phases were obtained by thermally induced transformation of these amorphous powders. From FT-IR and XPS data, it was concluded that a complex containing titanium and ammonia was formed in the precipitate stage while calcination drove weakly adsorbed ammonium species off the surface, decomposed ammonia bound on surface of precipitated powder and led to substitution of nitrogen atom into the lattice of TiO₂ during the crystallization. The activation energies required for grain growth in amorphous TiO_2−xN_x and TiO₂ samples were determined to be 1.6 and 1.7 kJ/mol, respectively. Those required for the phase transformation from amorphous to crystalline TiO_2−xN_x and TiO₂ were determined to be 129 and 142 kJ/mol, respectively. A relatively low temperature was required for the phase transformation in NTP sample than in ATP sample. The fabricated N-doped TiO₂ photocatalyst absorbed the visible light showing two absorption edges; one in UV range due to titanium oxide as the main edge and the other due to nitrogen doping as a small shoulder. TiO_2−xN_x photocatalyst demonstrated its photoactivity for photocurrent generation and decomposition of 2-propanol (IPA) under visible light irradiation ().     

Solid solubility and phase transitions in the system LaNb1−xTaxo4

The solid solubility between LaNbO₄ and LaTaO₄ was investigated by X-ray diffraction, and a two-phase region was observed in the composition region LaNb_1−xTa_xO₄ where 0.4?x?0.8. Single-phase LaNb_1−xTa_xO₄ (0?x?0.4) with the monoclinic Fergusonite structure at ambient temperature, was observed to transform to a tetragonal Scheelite structure by in-situ high-temperature X-ray diffraction, and the phase transition temperature was shown to increase with increasing Ta-content. This ferroelastic to paraelastic second-order phase transition was described by Landau theory using spontaneous strain as an order parameter. The thermal expansion of LaNb_1−xTa_xO₄ (0?x0.4) was shown to be significantly higher below the phase transition than above. Single-phase LaNb_1−xTa_xO₄ (0.8?x?1) with another monoclinic crystal structure at ambient temperature was shown to transform to an orthorhombic crystal structure by X-ray diffraction and differential scanning calorimetry. The phase transition temperature was observed to decrease with decreasing Ta-content. Finally, orthorhombic LaTaO₄ could also be transformed to monoclinic LaTaO₄ at ambient temperature by applying a uniaxial pressure of 150-170 MPa, reflecting the lower molar volume of monoclinic LaTaO₄.