New hybrid polyoxometalate/polymer composites for photodegradation of eosin dye

New polyoxometalate (POM)/polymer hybrid composites were prepared by photopolymerization under mild conditions for suitable photocatalytic processes. Polyoxometalates were incorporated in special photosensitive resins, which were photopolymerized under visible light to obtain new materials with photocatalytic activity for dye removal. The synthesized composites were characterized by real‐time FT‐IR, and the photocatalytic ability was investigated on Eosin‐Y removal using photolysis under near UV irradiation. Interestingly, the polyoxometalates keep their photocatalytic properties, while incorporated into the polymeric matrix since very high conversion rates of Eosin‐Y were achieved. Indeed, degradation efficiencies of about 98% and 93% were registered when using H₃PMo₁₂O₄₀/polymer and 94% for SiMo₁₂O₄₀(IPh₂)₄/polymer composites, respectively. These first results reported in this article show that the new synthesized POM/polymer composites could be considered as promising materials for green and more suitable organic dye removal from aqueous solutions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1538–1549     

Synthesis and antitumoral activity of gelatin/polyoxometalate hybrid nanoparticles

Surfactant-free gelatin/heptamolybdate (HM) hybrid nanoparticles are prepared by a simple and environmentally friendly approach utilizing the electrostatic interaction between anionic HM and the zwitterionic gelatin. The obtained nanoparticles have a tunable size and very high HM loading content up to about 70%. In vitro and in vivo experiments prove that the gelatin/HM hybrid nanoparticles exhibit significantly better antitumor activity than plain ammonium heptamolybdate solution. Therefore, the gelatin/HM hybrid nanoparticles reported here may serve as a prototype platform for polymer/polyoxometalate (POM) hybrid nanoparticles as cancer treatment agents and hence open up more opportunities to maximize the potential of POM-based pharmaceutical agents.     

Three Mechanisms in One Material: Uranium Capture by a Polyoxometalate–Organic Framework through Combined Complexation,Chemical Reduction,and Photocatalytic Reduction

The design and synthesis of uranium sorbent materials with high uptake efficiency, capacity and selectivity, as well as excellent hydrolytic stability and radiation resistance remains a challenge. Herein, a polyoxometalate (POM)–organic framework material ( SCU‐19 ) with a rare inclined polycatenation structure was designed, synthesized through a solvothermal method, and tested for uranium separation. Under dark conditions, SCU‐19 can efficiently capture uranium through ligand complexation using its exposed oxo atoms and partial chemical reduction from U^VI to U^IV by the low‐valent Mo atoms in the POM. An additional U^VI photocatalytic reduction mechanism can occur under visible light irradiation, leading to a higher uranium removal without saturation and faster sorption kinetics. SCU‐19 is the only uranium sorbent material with three distinct sorption mechanisms, as further demonstrated by X‐ray photoelectron spectroscopy (XPS) and X‐ray absorption near edge structure (XANES) analysis.     

Three Mechanisms in One Material: Uranium Capture by a Polyoxometalate–Organic Framework through Combined Complexation,Chemical Reduction,and Photocatalytic Reduction

The design and synthesis of uranium sorbent materials with high uptake efficiency, capacity and selectivity, as well as excellent hydrolytic stability and radiation resistance remains a challenge. Herein, a polyoxometalate (POM)–organic framework material ( SCU‐19 ) with a rare inclined polycatenation structure was designed, synthesized through a solvothermal method, and tested for uranium separation. Under dark conditions, SCU‐19 can efficiently capture uranium through ligand complexation using its exposed oxo atoms and partial chemical reduction from U^VI to U^IV by the low‐valent Mo atoms in the POM. An additional U^VI photocatalytic reduction mechanism can occur under visible light irradiation, leading to a higher uranium removal without saturation and faster sorption kinetics. SCU‐19 is the only uranium sorbent material with three distinct sorption mechanisms, as further demonstrated by X‐ray photoelectron spectroscopy (XPS) and X‐ray absorption near edge structure (XANES) analysis.     

Plasmonic Ag/AgBr nanohybrid: synergistic effect of SPR with photographic sensitivity for enhanced photocatalytic activity and stability

A plasmonic Ag/AgBr nanohybrid has been synthesized by in situ thermal reduction of AgBr nanoparticles in polyols. This directly converted Ag/AgBr shows significant absorption over the full visible spectrum. The enhanced light absorption in the spectral region of 450 nm to 800 nm was due to the plasmonic nanosized Ag grown on the surface of AgBr nanoparticles with mixed morphologies and increased sizes. Under visible light irradiation, the plasmonic Ag/AgBr exhibits high activity and stability for the photodegradation of organic pollutants, e.g. methylene blue. The contribution of the SPR and its synergistic effect with the photosensitive AgBr in the photocatalytic activity were verified. Based on the plasmon-mediated charge injection and the band structure of the metal-semiconductor heterojunction, a mechanism of the plasmon synergistically enhanced photocatalytic process was proposed.     

Synthesis of cobalt-doped ZnO/rGO nanoparticles with visible-light photocatalytic activity through a cobalt-induced electrochemical method

ZnO is a semiconductor photocatalyst widely applied in photodegradation of organic pollutants and in photoelectric conversion. ZnO exhibits low photocatalytic activity due to poor absorption in the visible region. In this work, a novel cobalt-induced electrochemical growth method was developed to synthesize cobalt-doped ZnO/rGO nanoparticles in an aqueous solution at room temperature. Cobalt-doped ZnO/rGO nanoparticles exhibited wider visible-light absorption band ranging from 400 nm to 700 nm due to cobalt doping. The surface structure of ZnO formed by the cobalt-induced electrochemical method without other ions is suitable for photocatalytic reactions. The cobalt-doped ZnO/rGO nanoparticles were found to exhibit in photodegradation and photo-electrochemical measurements and exhibited enhanced photocatalytic activity under visible-light irradiation.     

多酸掺杂Bi2O3-x/Bi光催化剂用于高效可见光催化降解四溴双酚A和NO去除

四溴双酚A(TBBPA)是一种重要的塑料添加剂和阻燃剂,广泛用于树脂、塑料、胶黏剂以及涂料中.它不仅是持久性的机污染物,还是一种内分泌干扰物,具有免疫毒性、神经毒性和细胞毒性.NOx,特别是NO,是主要的大气污染物之一,是形成PM2.5的重要前体,也容易引起酸雨,引发光化学烟雾、臭氧损耗、温室效应等,严重危害生态环境和...     

Synthesis of Titanium Dioxide Nanoparticles for Photocatalytic Degradation of Cyanide in Wastewater

Cyanide is highly toxic, and although various approaches have been employed for its remediation, these methods do not have the required performance. This report describes the synthesis of titanium dioxide nanoparticles with maximum photocatalytic properties and their application for the treatment of cyanide in wastewater. Three types of crystalline titanium nanoparticles were synthesized: anatase, rutile, and a biphasic mix of rutile and anatase. The phase and microscopic properties were characterized by X-ray diffraction and scanning electron microscopy. The specific surfaces of the particles were determined, and their photocatalytic activity was studied under the ultraviolet irradiation for cyanide degradation. The results indicate that an increase in sulfate ion leads to changes in the phase ratios of rutile to anatase. The diameter of the nanoparticles was between 18 and 22 nm, and they displayed high photocatalytic properties. The biphasic form of the titanium dioxide nanoparticles demonstrated the highest removal of cyanide. Complete degradation of cyanide was observed in a pilot scale experiment.     

Hydrothermal synthesis and characterization of Nd-doped ZnSe nanoparticles with enhanced visible light photocatalytic activity

In the present study, Nd³⁺-doped ZnSe nanoparticles with variable Nd contents were successfully synthesized via a hydrothermal process using Neodymium (III) chloride hexahydrate as the doping source. X-ray diffraction, UV–Vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy and transmission electron microscopy were used for characterization of the synthesized nanoparticles. It was confirmed by the DRS analysis that both of the undoped and Nd-doped ZnSe samples had significant optical absorption in the visible light range. The photocatalytic performance of as-synthesized nanoparticles was investigated towards the decolorization of C. I. Acid Orange 7 solution under visible light irradiation. Results indicated that the loading of Nd dopant into ZnSe nanoparticles significantly enhanced the photocatalytic activity of pure ZnSe with increasing Nd loading up to 6 mol% (color removal efficiency of 24.31 % for ZnSe and 84.20 % for Nd_0.06Zn_0.94Se after 120 min of treatment) and then the photocatalytic activity began to decrease.     

Bi6Fe1.9Co0.1Ti3O18纳米片负载Au尺寸对其可见光光催化性能的影响

我们通过一种简单的化学方法制备了具有可见光催化性能的Bi₆Fe_1.9Co_0.1Ti₃O₁₈/Au（BFCTO/Au）纳米复合材料。结果表明,通过负载不同颗粒大小的Au纳米颗粒（~23 nm、~36 nm、~55 nm和~80 nm）,BFCTO的可见光光催化性能明显增强,其中负载粒径为~23 nm的Au纳米颗粒的BFCTO/Au-1样品的可见光光催化效率最高。     

纳米二氧化钛负载棉织物的制备及性能

以棉织物为基体,通过紫外辐照和超声法将不同表面性质的TiO_2纳米粒子负载到棉织物上,制备自清洁材料.利用扫描电子显微镜、能谱分析、接触角、紫外-可见光谱及降解甲基橙溶液等手段分别对样品表面的结构形貌、元素分布、光催化活性、紫外屏蔽性能和耐久性等进行分析.结果表明,棉织物经紫外辐照后,TiO_2纳米粒子与其结合更牢固,耐久性更佳;TiO_2负载后的棉织物表现出超疏水性能及优异的光催化活性和紫外屏蔽性能;与未改性的TiO_2纳米粒子相比,由聚乙烯醇(PVA)改性的TiO_2纳米粒子制备的自清洁棉织物的可见光光催化活性更高,其可见光的光催化效率是前者的3.9倍.PVA改性的纳米TiO_2对290~400 nm范围内的紫外光有较好的吸收作用,其紫外屏蔽效果更佳.     

ZnCo2O4纳米粒子的可见光催化性能

研究了共沉淀分解法制备的ZnCo₂O₄纳米粒子的光学和可见光催化性能,并对其晶体结构和微观结构用X射线衍射、热重/差热分析、透射电镜和高分辨透射电镜等手段进行了表征.结果表明,制备的纳米粒子为纯相的ZnCO₂O₄,平均粒径约为10-20 nm.紫外-可见吸收光谱估计出ZnCo₂O₄纳米粒子的能带隙为3.39和2.09 eV.可见光（λ>420 nm）照射下,纳米粒子表现出降解亚甲基蓝溶液的光催化活性.ZnCo₂O₄纳米粒子的光催化活性可以归结为紫外和可见光下纳米粒子吸收光子（能量大于能带隙）的能力,以及它们的纳米尺寸,基于实验结果,本文提出了ZnCO₂O₄可能的能带结构.     

One-step solvothermal synthesis of N-doped TiO2 nanoparticles with high photocatalytic activity in the reduction of aqueous Cr（Ⅵ）

N-doped TiO2 （N-TiO2） nanoparticles were synthesized via a one-step low temperature （180℃） solvothermal route, which adopted NH4NO3 as the nitrogen source. The structure, composition, BET specific surface area, and optical properties of the as-synthesized product were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, N2 adsorption- desorption isotherms, and UV-vis diffuse reflectance spectroscopy. In addition, its photocatalytic properties were tested by the reduction of aqueous Cr（VI） under UV and visible light （x 〉 420 rim） irradiation. It was observed that for the reduction of aqueous Cr（VI）, the as-synthesized N-TiO2 nanoparticles not only exhibited much higher photocatalytic activity than P25 TiO2 under UV light, but also exhibited remarkably high photocatalytic activity under visible light （λ 〉 420 nm）.     

Synthesis, property characterization and photocatalytic activity of the novel composite polymer polyaniline/Bi2SnTiO7

A novel polyaniline/Bi(2)SnTiO(7 )composite polymer was synthesized by chemical oxidation in-situ polymerization method and sol-gel method for the first time. The structural properties of novel polyaniline/Bi(2)SnTiO(7) have been characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and X-ray spectrometry. The lattice parameter of Bi(2)SnTiO(7) was found to be a = 10.52582(8) ?. The photocatalytic degradation of methylene blue was realized under visible light irradiation with the novel polyaniline/Bi(2)SnTiO(7) as catalyst. The results showed that novel polyaniline/Bi(2)SnTiO(7 )possessed higher catalytic activity compared with Bi(2)InTaO(7) or pure TiO(2) or N-doped TiO(2) for photocatalytic degradation of methylene blue under visible light irradiation. The photocatalytic degradation of methylene blue with the novel polyaniline/Bi(2)SnTiO(7) or N-doped TiO(2) as catalyst followed first-order reaction kinetics, and the first-order rate constant was 0.01504 or 0.00333 min(-1). After visible light irradiation for 220 minutes with novel polyaniline/Bi(2)SnTiO(7 )as catalyst, complete removal and mineralization of methylene blue was observed. The reduction of the total organic carbon, the formation of inorganic products, SO(4)2- and NO(3-), and the evolution of CO(2) revealed the continuous mineralization of methylene blue during the photocatalytic process. The possible photocatalytic degradation pathway of methylene blue was obtained under visible light irradiation.     

In situ construction of oxygen-vacancy-rich Bi~0@Bi_2WO_(6-x) microspheres with enhanced visible light photocatalytic for NO removal

Surface oxygen vacancy defects and metal deposition on semiconductor photocatalysts play a critical role in photocatalytic reactions.In this work,oxygen-deficient Bi_2WO_6 microspheres have been prepared by a facile ethylene glycol-assisted solvothermal method.Bi~0 nanoparticles were reduced by in situ thermaltreatment on Bi_2WO_6 microspheres to obtain Bi~0@Bi_2WO_(6-x) as well as maintaining the oxygen vacancies(OVs) under N_2 atmosphere.Afterwards,photocatalytic NO oxidation removal activities of these photocatalysts were investigated under visible light irradiation and Bi~0@Bi_2WO_(6-x) shows the best NO removal activity than other samples.The photogenerated cha rge separation and trans fe r are promoted by Bi~0 nanoparticles deposited on the surface of semiconductor catalysts.OVs defects promote the activation of reactants(H_2 O and O_2),thereby enhancing the formation of the active substance.Moreover,both OVs defects and Bi~0 metal have the characteristics of extending light absorption and enhancing the efficient utilization of solar energy.Besides,the photocatalytic NO oxidation mechanism of Bi~0@Bi_2WO_(6-x)was investigated by in situ FTIR spectroscopy for reaction intermediates and final products.This work furnishes insight into the synthesis strategy and the underlying photocatalytic mecha nism of the surfacemodified Bi~0@Bi_2WO_(6-x) composite for pollutants removal.     

Synthesis of TiO2 photocatalysts with abundant surface defects using a TiO2@NaCl precursor

TiO2 nanoparticles have been synthesized by using a TiO2@NaCl core-shell structure as the precursor. The surface defects were well preserved by the NaCl shell, and therefore high oxygen adsorption capacity was observed. After the NaCl shell was removed, the resulting pure TiO2 nanoparticles were of anatase phase and uniform size of around 20?24 nm. The presence of an abundance of surface defects contributes to the high photocatalytic activity of the synthesized materials, and the TiO2 materials obtained from the TiO2@NaCl precursor can be used as efficient photocatalysts for degradation of rhodamine B under UV light irradiation.     

Photocatalytic degradation of anionic surfactant using zinc oxide nanoparticles

In this paper the photocatalytic degradation of anionic surfactant LABS was studied by a batch process using ZnO nanoparticles with diameter size of 20 nm catalyst on irradiation with UV light and their behavior comparatively examined with respect to ZnO commercial powder. The effect of parameters such as initial surfactant concentration, initial solution pH has been studied. Also degradation at LABS in the presence of an electron acceptor like potassium peroxydisulfate and effect of anion presence on surfactant degradation has been systematically investigated. The obtained result demonstrated a high photocatalytic activity of nanosize semiconducting particles.     

Preparation, characterization, and photocatalytic activity of polyaniline/ZnO nanocomposite

Polyaniline (PANI)/zinc oxide (ZnO) nanocomposite was synthesized by in-situ polymerization. X-ray diffraction patterns, UV?Cvisible spectroscopy, SEM, and TEM were used to characterize the composition and structure of the nanocomposite. Nanostructured PANI/ZnO composite was used as photocatalyst in the photodegradation of methylene blue dye molecules in aqueous solution. The photocatalytic activity of PANI/ZnO nanocomposite under UV and visible light irradiation was evaluated and was compared with that of ZnO nanoparticles. ZnO/PANI core?Cshell nanocomposite had greater photocatalytic activity than ZnO nanoparticles and pristine PANI under visible light irradiation. According to these results, application of PANI as a shell on the surface of ZnO nanoparticles causes the enhanced photocatalytic activity of the PANI/ZnO nanocomposite. Also UV?Cvisible spectroscopy studies showed that the absorption peak for PANI/ZnO nanocomposite has a red shift toward visible wavelengths compared with the ZnO nanoparticles and pristine PANI. The effect of different operating conditions on the photocatalytic performance of PANI/ZnO nanocomposite in the photodegradation of methylene blue dye molecules was investigated in a bath experimental setup.     

Photocatalysis and photoinduced hydrophilicity of WO3 thin films with underlying Pt nanoparticles

The photocatalytic oxidation and photoinduced hydrophilicity of thin tungsten trioxide (WO(3)) films coupled with platinum (Pt) nanoparticles were investigated. WO(3) films with underlying Pt nanoparticles (WO(3)/Pt/substrate) and those with overlying Pt nanoparticles (Pt/WO(3)/substrate) were synthesized by sputtering and sol-gel methods. Between these films, underlying Pt nanoparticles greatly enhanced the photocatalytic oxidation activity of WO(3) without decreasing the photoinduced hydrophilic conversion. However, overlying Pt nanoparticles deteriorated the hydrophilicity of WO(3) because the Pt nanoparticle surface was hydrophobic. The enhanced photocatalytic reaction by the Pt nanoparticles was attributed to the multi-electron reduction in Pt, which is caused by the injected electrons from the conduction band of WO(3). The relationship between photocatalytic activity and thin film structure, including the size of Pt nanoparticles, the thickness and porosity of the WO(3) layer, were investigated. Consequently, the optimum structure for high performance in both photocatalysis and photoinduced hydrophilicity was WO(3) (50 nm)/Pt(1.5 nm)/substrate, and this film exhibited a significant self-cleaning property even under visible light irradiation.     

Green biosynthesis and characterization of zinc oxide nanoparticles using Corymbia citriodora leaf extract and their photocatalytic activity

ABSTRACT

We reported a green and simple method for biosynthesizing zinc oxide nanoparticles (ZnO NPs) using Corymbia citriodora leaf extract as reducing and stabilizing agent. SEM, EDX, XRD, UV–VIS spectroscopy, Raman spectroscopy and TGA have been used for characterizing the biosynthesized ZnO NPs. The results indicating the ZnO NPs synthesized by C. citriodora leaf extract have high purity and the average size is 64?nm. The photocatalytic activity of the ZnO NPs has been investigated by degradation methylene blue under visible light irradiation. Due to the smaller size, the biosynthesized ZnO NPs showed an excellent photocatalytic performance.