Isomerization ofn-butane on the SO4/ZrO2 catalyst promoted by IV Period metals

The catalytic activity of superacidic systems based on SO₄/ZrO₂ and modified by IV Period metals in isomerization ofn-butane was studied. At low temperatures of the reaction, the introduction of Fe³⁺, Sc³⁺, Co²⁺, or Zn²⁺ ions (1%) increases the yield of isobutane by 1.5 times due to the activation ofn-butane on the sites created by the promoting ions. The addition of Cr³⁺, V⁴⁺, or Mn²⁺ (1%) decreases the catalytic activity because of a decrease in the catalyst acidity, most likely, due to the reduction of surface sulfur species. The influence of the nature of the support and surface additives of SiO₂, TiO₂, and ZrO₂ on the activity and selectivity of the catalytic system inn-butane isomerization was studied. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7 pp. 1276–1280, July, 1999     

Investigation of the state of palladium in the Pd/SO4/ZrO2 system by diffuse-reflectance IR spectroscopy

The Pd/ZrO₂ and Pd/SO₄/ZrO₂ systems were investigated by diffuse-reflectance IR spectroscopy using CO as the probe molecule. For the Pd/ZrO₂ system, the behavior of the metal is characteristic of the weak metal-support interaction. Intense bands attibuted to the bridging CO species indicate the formation of large metal particles in the reduced systems. Modification of the ZrO₂ support with SO₄ ^2? anions leads to an increase in the metal—support interaction and makes the metal more resistant to reduction. On the surface promoted by SO₄ ^2? anions, metal particles with a positive charge (Pd⁺ and Pd^δ+) were observed. The smaller the size of the metal clusters and the higher degree of oxidation of sulfur, the stronger the influence of acidic protons and surface sulfur compounds on the metal.     

Influence of support acidity on electronic state of platinum in oxide systems promoted by SO4 2− anions

The electronic state of platinum supported on SO₄/ZrO₂, SO₄/TiO₂, SO₄/Al₂O₃, and SO₄/SiO₂ systems and on systems unpromoted by sulfur was investigated by diffuse-reflectance IR spectroscopy using CO as the probe molecule. The introduction of SO₄ ²⁻ anions increases the electron deficit on platinum particles. This suppresses the formation of bridging CO complexes with the metal, leads to the high-frequency shift of absorption maxima of CO adsorbed in the linear form, and stabilizes positively charged metal species (Pt^δ+ and Pt⁺) during the reduction process. The formation of the positively charged species includes the interaction between the acidic protons and the metal particles yielding [Pt−H]^δ+ adducts. The extent of the influence of the support on the electronic state of the metal increases in the series SO₄/SiO₂<SO₄/Al₂O₃<SO₄/TiO₂<SO₄/ZrO₂ in parallel with an increase in the strength of the acid sites in the system. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1094–1099, June, 1998.     

Influence of Adding SiO2 into ZrO2 on SO2-4/ZrO2 Solid Superacid

用共沉淀法和负载法制备了一系列SO     

State of iridium supported on SO4/ZrO2

The Ir/ZrO₂ and Ir/SO₄/ZrO₂ systems were studied by diffuse-reflectance IR spectroscopy using CO as a probe molecule. After reduction of 0.5% Ir/ZrO₂ in flowing hydrogen at 200°C, the state of iridium is essentially Ir⁰, as in the iridium systems supported on amphoteric oxide supports. For Ir/SO₄/ZrO₂, the stabilization of ionic forms of the metal, the formation of species with a partial positive charge, and an increase in the frequencies of CO adsorbed on Ir⁰ particles, as compared with systems without sulfur, are found. At a concentration as low as 0.1 wt.%, iridium exists substantially as Ir³⁺ ions or small Ir^?+ particles. An increase in the concentration of iridium to 0.5 wt.% leads to the formation of the bulk Ir _n ⁰ phase, whose fraction increases as the iridium content increases. This phase predominates in the samples with 2.5 wt.% iridium.     

FT-IR study of the nature and stability of NOx surface species on ZrO2, VOx/ZrO2 and MoOx/ZrO2 catalysts

The adsorption of NO, NO/O₂ mixtures and NO₂ on pure ZrO₂ and on two series of catalysts supported on ZrO₂, one containing vanadia and the other molybdena (ZV and ZMo, respectively), has been investigated. The V and Mo surface contents of the latter were ≤3 atoms nm⁻² and ≤5 atoms nm⁻², respectively. All samples had been previously submitted to a standard oxidation treatment. On all samples, only extremely minor amounts of NO_x surface species are formed by NO interaction at room temperature (RT). NO_x surface species are formed in greater amounts on pure ZrO₂ when NO and O₂ are coadsorbed at RT; they are mainly nitrites, small amounts of nitrates, and small amounts of (O₂NO−H)^δ− species; when ZrO₂ is warmed to 623 K in the NO/O₂ mixture, nitrites decrease, nitrates and (O₂NO−H)^δ− species increase. The same NO_x species as on the ZrO₂ surface free from V (or Mo) are formed on ZV (or ZMo) samples with surface V (or Mo) density <1.5 atoms nm⁻²; however, they occur in decreased amount with increasing V (or Mo) coverage. On ZV samples with a surface V density of 1.5–3 atoms nm⁻² (or ZMo samples with a surface Mo density of 1.5–5 atoms nm⁻²) when NO and O₂ are coadsorbed at RT, there is formation of small amounts of nitrites, nitrates (both on ZrO₂ surface free from V (or Mo) and at the edges of V- or Mo-polyoxoanions) and NO₂ ^δ+ species, associated with V⁵⁺ (or Mo⁶⁺) of very strong Lewis acidity; when samples are warmed up 623 K in the NO/O₂ mixture, nitrites disappear, nitrates increase, NO₂ ^δ+ species remain constant or slightly decrease. When NO₂ is allowed into contact at RT with oxidized samples, surface situations almost identical to those obtained for each sample warmed to 623 K in NO/O₂ mixture is reached. The NO_x surface species stable at 623 K, the temperature at which catalysts show the best performance in the selective catalytic reduction (SCR) of NO by NH₃, are nitrates, both on ZrO₂ and on polyvanadates or polymolybdates at high nuclearity. On the contrary, nitrites and NO₂ ^δ+ species are unstable at 623 K.     

Impact of the Oxygen Defects and the Hydrogen Concentration on the Surface of Tetragonal and Monoclinic ZrO2 on the Reduction Rates of Stearic Acid on Ni/ZrO2

The role of the specific physicochemical properties of ZrO₂ phases on Ni/ZrO₂ has been explored with respect to the reduction of stearic acid. Conversion on pure m‐ZrO₂ is 1.3 times more active than on t‐ZrO₂, whereas Ni/m‐ZrO₂ is three times more active than Ni/t‐ZrO₂. Although the hydrodeoxygenation of stearic acid can be catalyzed solely by Ni, the synergistic interaction between Ni and the ZrO₂ support causes the variations in the reaction rates. Adsorption of the carboxylic acid group on an oxygen vacancy of ZrO₂ and the abstraction of the α‐hydrogen atom with the elimination of the oxygen atom to produce a ketene is the key to enhance the overall rate. The hydrogenated intermediate 1‐octadecanol is in turn decarbonylated to heptadecane with identical rates on all catalysts. Decarbonylation of 1‐octadecanol is concluded to be limited by the competitive adsorption of reactants and intermediate. The substantially higher adsorption of propionic acid demonstrated by IR spectroscopy and the higher reactivity to O₂ exchange reactions with the more active catalyst indicate that the higher concentration of active oxygen defects on m‐ZrO₂ compared to t‐ZrO₂ causes the higher activity of Ni/m‐ZrO₂.     

Preparation of Nanostructural ZrO2/SiO2 and Study on Catalytic Activity of its Superacid Catalyst

A novel material ZrO₂/SiO₂ was synthesized on SiO₂ support by means of electrostatic self‐assembly technique and sol‐gel method. After treating this material with 0.7 mol·L^?1 H₂SO₄, a nanostructural solid superacid catalyst SO₄^2?‐ZrO₂/SiO₂ was prepared. The material was characterized by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Brunauer Emmett Teller method (BET) and Hammett indicator method. The catalytic activity of the catalyst was carried out for the esterification between acetic acid and butanol. Results show that the catalytic activity of this catalyst was much higher than that of powdered superacid catalyst SO₄^2?/ZrO₂. Due to the SiO₂ spherical support, the solid superacid catalyst could be separated and recovered easily. The nanostructural ZrO₂/SiO₂ will be a promising material for the chemical industry in the future.     

FAD-modified SiO2/ZrO2/C ceramic electrode for electrocatalytic reduction of bromate and iodate

SiO₂/ZrO₂/C carbon ceramic material with composition (in wt%) SiO₂ = 50, ZrO₂ = 20, and C = 30 was prepared by the sol–gel-processing method. A high-resolution transmission electron microscopy image showed that ZrO₂ and the graphite particles are well dispersed inside the matrix. The electrical conductivity obtained for the pressed disks of the material was 18 S cm⁻¹, indicating that C particles are also well interconnected inside the solid. An electrode modified with flavin adenine dinucleotide (FAD) prepared by immersing the solid SiO₂/ZrO₂/C, molded as a pressed disk, inside a FAD solution (1.0 × 10⁻³ mol L⁻¹) was used to investigate the electrocatalytic reduction of bromate and iodate. The reduction of both ions occurred at a peak potential of −0.41 V vs. the saturated calomel reference electrode. The linear response range (lrr) and detection limit (dl) were: BrO₃ ⁻, lrr = 4.98 × 10⁻⁵–1.23 × 10⁻³ mol L⁻¹ and dl = 2.33 μmol L⁻¹; IO₃ ⁻, lrr = 4.98 × 10⁻⁵ up to 2.42 × 10⁻³ and dl = 1.46 μmol L⁻¹ for iodate.     

Preparation of high surface area ZrO2 and ZrO2-Y2O3 from the alkoxide

In order to obtain a catalyst support with a high surface area, ZrO₂ and ZrO₂-Y₂O₃ were prepared by the hydrolytic decomposition of the corresponding isopropoxide dissolved in benzene. The hydrolysis was carried out at 80°C using an excess amount of distilled water in flowing dry nitrogen. The precipitates thus obtained were dried at 100°C followed by calcination at 500°C in air or nitrogen for 1 h. The specific surface areas for both of the ZrO₂ and ZrO₂-Y₂O₃ increased with increasing amount of water added for hydrolysis, and the surface areas for ZrO₂-Y₂O₃ increased with increasing yttrium content. A ZrO₂ having a surface area of 130 m²/g was produced, and a stabilized tetragonal ZrO₂ with 15 mol% Y³⁺ having a surface area of 200 m²/g was produced. Furthermore, despite the difference in the ZrO₂ and ZrO₂-Y₂O₃ crystal structures, the lattice-strain of ZrO₂ has been unequivocally related to the surface area.     

Properties of surface acid sites of ZrO2 and SO4ZrO2-based systems studied by diffuse-reflectance Fourier-transform IR spectroscopy: adsorption of acetonitrile-d3

The properties of acid sites of ZrO₂ and SO₄/ZrO₂-based systems modified by metal ions were studied by DRIFT spectroscopy using acetonitrile-d₃ as a probe molecule. In the case of ZrO₂. CD₃CN interacts with the Lewis acid sites (LAS) with moderate strength. Adsorption on the Brönsted acid sites (BAS) is very weak, which indicates the absence of strong BAS on the surface of ZrO₂. Modification of the surface by SO₄ groups results in the appearance of a new type of BAS that are capable of adsorbing CD₃CN in the polycoordinated form,i.e., stronger complexes with the adsorbate. Addition of metal ions (Fe, Ga, Zn, or Co) leads to the formation of a new type of LAS connected with Fe³⁺, Ga³⁺, Zn²⁺, and Co²⁺ promoter ions.     

Formation of palladium nanoparticles in olefin oxidation with iron(III) aqua ions in the presence of the Pd/ZrO2/SO4 metallic catalyst

The reactions of the Pd/ZrO₂/SO₄-catalyzed oxidation of ethylene, propene, and but-1-ene in a 0.1–1.5 M solution of perchloric acid with iron(III) aqua ions to carbonyl compounds, viz., acetaldehyde, acetone, and methyl ethyl ketone, respectively, were studied. The formation of palladium nanoparticles (5 nm) in solution on contact of the initial heterogeneous Pd/ZrO₂/SO₄ catalyst with perchloric acid was proved by transmission electron microscopy. The palladium nanoparticles are assumed to play the key role in olefin oxidation with the iron(III) aqua ions. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 627–632, April, 2006.     

Nanosized CeO2–SiO2, CeO2–TiO2, and CeO2–ZrO2 Mixed Oxides: Influence of Supporting Oxide on Thermal Stability and Oxygen Storage Properties of Ceria

The influence of SiO₂, TiO₂, and ZrO₂ on the structural and redox properties of CeO₂ were systematically investigated by various techniques namely, X-ray diffraction (XRD), Raman spectroscopy (RS), UV–Vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HREM), BET surface area, and thermogravimetry methods. The effect of supporting oxides on the crystal modification of ceria was also mainly focused. The investigated oxides were obtained by soft chemical routes with ultrahigh dilute solutions and were subjected to thermal treatments from 773 to 1073 K. The XRD results suggest that the CeO₂–SiO₂ sample primarily consists of nanocrystalline CeO₂ on the amorphous SiO₂ surface. Both crystalline CeO₂ and TiO₂-anatase phases were noted in the case of CeO₂–TiO₂ sample. Formation of cubic Ce_0.75Zr_0.25O₂ and Ce_0.6Zr_0.4O₂ (at 1073 K) were observed in the case of CeO₂–ZrO₂ sample. The cell ‘a’ parameter estimations revealed an expansion of the ceria lattice in the case of CeO₂–TiO₂, while a contraction is noted in the case of CeO₂–ZrO₂. The DRS studies suggest that the supporting oxides significantly influence the band gap energy of CeO₂. Raman measurements disclose the presence of oxygen vacancies, lattice defects, and displacement of oxide ions from their normal lattice positions in the case of CeO₂–TiO₂ and CeO₂–ZrO₂ samples. The XPS studies revealed the presence of silica, titania, and zirconia in their highest oxidation states, Si(IV), Ti(IV), and Zr(IV) at the surface of the materials. Cerium is present in both Ce⁴⁺ and Ce³⁺ oxidation states. The HREM results reveal well-dispersed CeO₂ nanocrystals over the amorphous SiO₂ matrix in the case of CeO₂–SiO₂, isolated CeO₂ and TiO₂ (A) nanocrystals and some overlapping regions in the case of CeO₂–TiO₂, and nanosized CeO₂ and Ce–Zr oxides in the case of CeO₂–ZrO₂ sample. The exact structural features of these crystals as determined by digital diffraction analysis of HREM experimental images reveal that the CeO₂ is mainly in cubic fluorite geometry. The oxygen storage capacity (OSC) as determined by thermogravimetry reveals that the OSC of mixed oxides is more than that of pure CeO₂ and the CeO₂–ZrO₂ exhibits highest OSC.     

The state of metals in the supported bimetallic Pt−Pd/SO4/ZrO2 system

The behavior of the metals in the Pt−Pd/ZrO₂ and Pt−Pd/SO₄/ZrO₂ systems was studied by DRIFT spectroscopy. After reduction of Pt−Pd/ZrO₂ at 100 °C, the states of the metals are mainly Pt⁰ and Pd⁰ with a minor admixture of positively charged forms of Pt⁺ or Pd²⁺. An increase in the temperature of reduction leads to the formation of a bimetallic alloy. In the Pt−Pd/SO₄/ZrO₂ system, the effects of alloy formation and the interaction of the surface SO₄ groups superimpose. At low reduction temperatures, the surface SO₄ groups interact mainly with palladium. The influence of the surface sites on both supported metals increases with increasing reduction temperature. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1265–1270, July, 1999.     

ZrO2包覆的层状富锂正极材料0.6Li[Li1/3Mn2/3]O2·0.4LiNi5/12Mn5/12Co1/6O2的电化学性能

采用喷雾干燥法合成了富锂层状氧化物正极材料0.6Li[Li_1/3Mn_2/3]O₂·0.4LiNi_5/12Mn_5/12Co_1/6O₂(简称LNMCO),并使用Zr (CH₃COO)₄进行ZrO₂的包覆改性。TEM测试结果显示纳米级的ZrO₂颗粒附着在LNMCO的表面。包覆质量分数为1.5%的ZrO₂包覆样品的首圈库伦效率和放电比容量有着显著提升,在室温下其首圈库伦效率和放电比容量(电流密度：20 mA·g^-1,电压：2.0~4.8 V)分别为87.2%,279.3 mAh·g^-1,而原样则为75.1%,224.1 mAh·g^-1,循环100圈之后,1.5% ZrO₂包覆样品的放电比容量为248.3 mAh·g^-1,容量保持率为88.9%,高于原样的195.9 mAh·g^-1和87.4%。     

ZrO_2包覆的层状富锂正极材料0.6Li[Li_(1/3)Mn_(2/3)]O_2·0.4LiNi_(5/12)Mn_(5/12)Co_(1/6)O_2的电化学性能

采用喷雾干燥法合成了富锂层状氧化物正极材料0.6Li[Li_(1/3)Mn_(2/3)]O2·0.4LiNi_(5/12)Mn_(5/12)Co_(1/6)O_2(简称LNMCO),并使用Zr(CH3COO)4进行ZrO_2的包覆改性。TEM测试结果显示纳米级的ZrO_2颗粒附着在LNMCO的表面。包覆质量分数为1.5%的ZrO_2包覆样品的首圈库伦效率和放电比容量有着显著提升,在室温下其首圈库伦效率和放电比容量(电流密度:20 m A·g-1,电压:2.0~4.8 V)分别为87.2%,279.3 m Ah·g-1,而原样则为75.1%,224.1 m Ah·g-1,循环100圈之后,1.5%ZrO_2包覆样品的放电比容量为248.3 m Ah·g-1,容量保持率为88.9%,高于原样的195.9 m Ah·g-1和87.4%。     

The state of nickel in the silver modified NiMg/SiO<Subscript>2</Subscript> vegetable oil hydrogenation catalysts

Two series of silver modified Ni-Mg materials were synthesized by precipitation-deposition on SiO₂ support derived from two silica sources: diatomite activated at 800°C (Series a; Mg/Ni = 0.1 and SiO₂/Ni = 1.07) and synthetic water glass (Series b; Mg/Ni = 0.1 and SiO₂/Ni = 1.15). The modification with silver was made at three molar Ag/Ni ratios, namely 0.0025, 0.025, and 0.1. The effects of the source of the silica support and the silver presence and content on the nickel state in the silver modified reduced-passivated NiMg/SiO₂ precursors of the vegetable oil hydrogenation catalyst were established by X-ray diffraction and X-ray photoelectron spectroscopy techniques. The passivation procedure was applied in order to protect the metallic nickel particles from further oxidation. The crystallization of the formed nickel hydrosilicate phases depends on the source of the silica support, more expressed in the diatomite supported samples. It was shown that the silver modification of the NiMg/SiO₂ precursors enhances the reduction of the nickel hydrosilicates accompanied by formation of relatively smaller metallic nickel particles, more pronounced in the water glass supported precursors. The increase of the silver content in the water glass deposited samples is responsible for the metallic nickel dispersion increase. The higher content of the Ni⁰ particles on the surface of the diatomite deposited samples is in accordance with the higher stability of the larger metallic nickel crystallites to oxidation during the passivation step. On contrary, higher dispersed Ni⁰ particles on the surface of the water glass supported samples are more susceptible to the oxida The article is published in the original.     

Pt/SO42??ZrO2: The state of platinum and its relation with catalytic activity inn-hexane isomerization

Pt/SO₄ ²⁻−ZrO₂ calcined at 873 K shows the same catalytic activity forn-hexane isomerization as the calcined and reduced sample. A platinum reduction peak did not appear in the TPR profile and the presence of Pt⁰ was detected by XPS on the only calcined Pt/SO₄ ²⁻−ZrO₂. Nevertheless, this calcined material does not show hydrogen chemisorption and cyclohexane dehydrogenation activity.     

Synthesis characterization and catalytic evaluation of Ni/ZrO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> aerogels catalysts

The Ni/ZrO₂/SiO₂ aerogels catalysts were synthesized via three different routes: (i) impregnation ZrO₂–SiO₂ composite aerogels with a aqueous solution of Ni(NO₃)₂, (ii) impregnation SiO₂ aerogels with a mixed aqueous solution of Ni(NO₃)₂ and ZrO(NO₃)₂ · 2H₂O, (iii) one-pot sol–gel procedure from precursors Ni(NO₃)₂/ZrO(NO₃)₂ · 2H₂O/Si(OC₂H₅)₄. These catalysts were characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), ammonia temperature-programmed desorption (NH₃-TPD), N₂ adsorption–desorption isotherms and Fourier transform infrared (FT-IR). The Liquid-phase hydrogenation of maleic anhydride (MA) was performed over these catalysts. The results revealed that the different preparation routes result in a difference between the obtained samples, concerning the crystal structure and composition, surface acidity, mixed level of each component, texture, and catalytic selectivity.     

Quantum chemical study of changes in the magnetic state of Ni(AA)2 and Ni(ktf)2 adsorbed on the surface of natural silica

For nickel(II) bis-acetylacetonate [Ni(AA)₂] and nickel(II) bis-trifluoroketoiminate [Ni(ktf)₂], quantum chemical cluster modeling of the effect of chelate node distortion and changed coordination number of the central atom on the magnetic state of the molecules adsorbed on the surface of hydrated natural oxide on silicon by the SCF-X_a-SW method is reported. Differences between the energies of the lowest singlet and triplet states are obtained for the clusters. It is shown that the diamagnetic state of Ni(ktf)₂ molecules changes to paramagnetic when the coordination number of the central atom increases due to its donor-acceptor interaction with the Si-O groups of the real surface of silicon provided that the molecules are adsorbed by the planes of the chelate rings. Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences. Translated fromZhurnal Strukturnoi Khimii, Vol. 39, No. 2, pp. 231–238, March–April, 1998. This work was supported by ISF grants RBL000 and RBL300. The procedure for modelingβ-diketonates was worked out in the framework of the Russian Scientific-Technical Program “Surface Atomic Clusters” (grant No. 95-2.11).