L-半胱氨酸改性Fe3O4纳米粒子的水热合成及其应用

以L-半胱氨酸为表面改性剂与粒径调节剂,采用水热法制备具有良好分散稳定性的磁性Fe₃O₄纳米粒子。通过透射电镜（TEM）、扫描电镜（SEM）、X射线衍射仪（XRD）、比磁饱和强度测定仪（VSM）等对产物进行表征,研究L-半胱氨酸对磁性Fe₃O₄纳米粒子的形貌、粒径分布、晶型结构、分散稳定性等的影响,理论推导了L-半胱氨酸改性后的Fe₃O₄纳米粒子（L-Fe₃O₄纳米粒子）的生成机制,将该材料作为载体吸附金种后探讨其在催化对硝基苯酚方面的应用。结果表明：沉降22 h时,调节pH值为7.0制备的Fe₃O₄纳米粒子的沉降高度大约是L-Fe₃O₄纳米粒子的6.5倍;吸附金种后的L-Fe₃O₄纳米粒子催化效率大约是未改性Fe₃O₄纳米粒子的5倍。L-半胱氨酸有效的改善了Fe₃O₄纳米粒子与分散介质之间的相容性,保护并改善了纳米粒子的分散稳定性,在污水处理等方面有潜在的应用。     

磁性Fe3O4纳米粒子的功能化修饰研究进展

Fe₃O₄纳米粒子因其独特的磁学性能和良好的生物相容性,在生物医药、催化剂、环境治理等领域具有良好的应用前景。然而,磁性Fe₃O₄纳米粒子易团聚、在潮湿的空气中易氧化,制约了Fe₃O₄纳米粒子的深度应用。本文结合课题组在磁性Fe₃O₄纳米粒子应用方面的研究成果,综述了磁性Fe₃O₄纳米粒子的功能化修饰,并讨论了磁性Fe₃O₄复合纳米材料发展面临的机遇和挑战。      

表面分子印迹磁性纳米粒子的制备及其血红蛋白传感应用

以Fe₃O₄磁性纳米粒子为载体、多巴胺（DA）为功能单体、血红蛋白（Hb）为模板分子,用氯铂酸氧化DA生成聚多巴胺（PDA）,同时氯铂酸还原为铂纳米粒子（PtNPs）,与Hb一起负载于Fe₃O₄纳米粒子表面,洗脱Hb后合成了表面分子印迹磁性纳米粒子（印迹Fe₃O₄/PDA-PtNPs）. 将印迹Fe₃O₄/PDA-PtNPs修饰于磁性玻碳基底表面,制得印迹Fe₃O₄/PDA-PtNPs修饰电极. 实验结果表明,印迹Fe₃O₄/PDA-PtNPs具有良好的水溶性,粒径分布均匀,生成的PtNPs具有良好的导电性和刚性. 用印迹Fe₃O₄/PDA-PtNPs构建的传感器对Hb具有良好的识别性,在0.14 ~ 2.7 μg·mL^-1 Hb浓度范围与交流阻抗变化值呈良好的线性关系,检出限（S/N=3）为0.05 μg·mL^-1.     

超顺磁性Fe3O4/Au@Ag复合材料的合成及其SERS性能研究

利用溶剂热法和种子生长法分别合成Fe₃O₄磁性纳米粒子和Au@Ag核壳纳米粒子, 利用静电吸附方法成功将聚乙酰亚胺(PEI)修饰到Fe₃O₄表面并通过N-Ag共价键将Au@Ag核壳纳米粒子组装到Fe₃O₄表面, 制备Fe₃O₄/Au@Ag复合材料. 通过控制Au@Ag复合粒子的加入量, 来调节Fe₃O₄/Au@Ag复合材料的表面增强拉曼(SERS)活性. 以对巯基苯胺(p-ATP)为拉曼活性探针分子来考察该复合纳米材料的SERS性能, 检测限可以低至2×10^-9 mol/L. 同时, 将该复合材料应用于农药分子福美双的检测, 检测限可以低至10^-6 mol/L. 这种功能性复合材料既具有良好的SERS活性, 又具有Fe₃O₄磁性内核, 可以通过外加磁场实现对待测分子的分离、富集, 具有更广泛的应用前景.     

羧甲基纤维素/Fe3O4复合纳米磁性材料的制备、表征及吸附性能的研究

采用改进的氧化沉淀法在羧甲基纤维素(CMC)体系中制备了以磁性纳米Fe₃O₄为核心, 外层包覆羧甲基纤维素的复合磁性纳米材料. 用透射电镜、X射线衍射、红外光谱、Zeta电位和震动样品磁强计对复合纳米Fe₃O₄进行了表面形貌、结构和磁学的表征. 在此基础上研究了复合纳米Fe₃O₄对Cu^2＋的吸附性能, 探讨了溶液pH、反应时间和 Cu^2＋的初始浓度对其吸附性能的影响. 实验结果表明, 复合Fe₃O₄粒子为反尖晶石型, 平均粒径在40 nm左右, 羧甲基纤维素在Fe₃O₄粒子表面是化学吸附, 复合Fe₃O₄粒子的饱和磁化强度为36.74 emu/g, 在中性溶液中Cu^2＋的吸附量最高, 吸附平衡时间为1.5 h, 二级动力学模型能够很好地拟合吸附动力学数据, 吸附等温数据符合Langmuir模型. 复合纳米Fe₃O₄对Cu^2＋的吸附机理主要为表面配位反应.     

Fe3O4纳米粒子修饰多壁碳纳米管的制备及在水和蜂蜜样品中痕量菊酯类农药分析中的应用

通过化学共沉淀法使Fe₃O₄纳米粒子负载于酸化多壁碳纳米管(AMWNTs)表面,得到Fe₃O₄/AMWNTs磁性纳米材料。该材料具有很好的磁响应度和分散性,将其用于富集痕量拟除虫菊酯类农药残留,结果证明该复合材料对菊酯类农药的吸附性能良好。通过对影响萃取性能的几种因素如离子强度、萃取时间和解吸时间依次进行优化,在最优条件下,建立了Fe₃O₄/AMWNTs磁性分散固相萃取-气相色谱测定6种菊酯类农药残留的分析方法。线性范围在0.5~50 μg/L之间,相关系数(R²)大于0.990,检出限为0.07~0.20 μg/L,精密度为3.8%~8.1%。该方法用于河水、鱼塘水和两种市售蜂蜜中菊酯类农药的残留分析,回收率高于78.4%。该方法操作简便、灵敏度高,能够满足环境水样及蜂蜜样品中痕量菊酯农药残留的分析需求。     

磁性二氧化硅复合纳米粒子的合成及其与青铜器的相互作用研究

采用反相微乳液法, 合成了以PVP分散的磁性Fe₃O₄纳米粒子为核、SiO₂为壳并复合有荧光标记物钌联吡啶的核壳型复合功能纳米粒子. 在对该功能型二氧化硅复合纳米粒子进行TEM、荧光特性和磁性等特性表征的基础上, 重点研究了水溶性高聚物PVP溶液对Fe₃O₄纳米粒子的分散性, 并将其均匀的包入SiO₂壳中, 基于此研究了该功能型二氧化硅复合纳米粒子与青铜器之间的相互作用、以功能型复合纳米粒子为材料对青铜器腐蚀机理进行了在线、无损、实时监测以及将复合纳米材料从被分析体系中无损去除的方法, 发展了适合于去除吸附于青铜器文物表面的功能型纳米粒子的新方法. 这一研究结果为以该纳米粒子为基质构建适合于青铜器表面成分分析的纳米传感器奠定了基础.     

用于磁性靶向治疗肺纤维化的聚多巴胺包覆的Fe3O4/甲强龙/环磷酰胺复合超粒子

肺纤维化是一种致命性肺部疾病, 目前临床常规的甲强龙(MPS)联合环磷酰胺(CTX)治疗方法存在明显的不良反应. 基于降低药物毒副作用的目的, 本文设计了一种聚多巴胺(PDA)包覆的Fe₃O₄纳米粒子/甲强龙/环磷酰胺复合超粒子(Fe₃O₄/MPS/CTX@PDA SPs), 提出磁性靶向治疗肺纤维化的思路. 从预制的油溶性Fe₃O₄纳米粒子出发, 通过水包油微乳液模板法制备了Fe₃O₄ 超粒子(SPs), 并在进一步包覆PDA壳层的过程中引入MPS和CTX, 制备了Fe₃O₄/MPS/CTX@PDA SPs, 考察了Fe₃O₄/MPS/CTX@PDA SPs的稳定性、 磁性、 对MPS和CTX的负载及释放, 分析了其生物毒性, 并建立动物模型验证了其磁性靶向功能.     

超顺磁性Fe3O4纳米粒子在磁共振造影中的应用

超顺磁性Fe₃O₄纳米粒子由于其廉价、低毒及超顺磁等特性,已成为重要的一类磁共振造影剂.本文综述了超顺磁性Fe₃O₄纳米粒子的可控制备方法,归纳总结影响粒径、结晶度和磁性能的主要因素和影响规律;为进一步提高磁性能并实现多功能,总结了Fe₃O₄纳米粒子进一步组装和表面改性的方法和机理;系统讨论了Fe₃O₄纳米粒子的形貌、尺寸和表面性能等对磁性能和生物相容性的影响规律;并指出了Fe₃O₄纳米粒子在磁共振造影领域潜在的发展方向和研究热点.     

双官能Fe3O4/CdSe/CdS荧光磁性复合物的制备和表征

采用化学共沉淀法, 以FeCl₂•4H₂O和FeC1₃•6H₂O为原料制备磁性Fe₃O₄纳米颗粒(MNPs), 采用氨基酸对其进行修饰使其表面连上氨基. 用巯基乙酸作为稳定剂合成了水溶性的CdSe/CdS量子点, 并利用偶联剂1-乙基-3-(3-二氨丙基)碳二亚胺盐酸盐(EDC)和N-羟基琥珀酰亚胺(NHS)连接氨基修饰的Fe₃O₄和带有羧基的CdSe/CdS, 成功制备了Fe₃O₄/CdSe/CdS荧光磁性纳米颗粒. 该荧光磁性纳米复合物保留了CdSe/CdS量子点优异的荧光特性, 平均粒径在40 nm左右; 磁化曲线表明此纳米复合物具有超顺磁性. 这种双官能复合纳米颗粒有望成为新型荧光磁性双标记复合微粒而广泛应用于免疫检测、荧光追踪、磁性分离等领域.     

Synthesis,characterization and properties of multifunctional poly(arylene ether nitriles) (PEN)/CNTs/Fe3O4 nanocomposites

In this study, a novel multifunctional poly(arylene ether nitriles)(PEN)/carbon nanotubes/Fe₃O₄ nanocomposite with high tensile strength, magnetic, and electrical properties was investigated. First, we synthesized the monodisperse Fe₃O₄ nanoparticles on the surface of the multiwalled carbon nanotubes and then the hybrid material was compounded with PEN through the solution‐casting method. The SEM and TEM images indicated that the monodisperse Fe₃O₄ nanoparticles, with the diameters of 70∼80 nm, were self‐assembled along CNTs via the covalent bond method, which was confirmed by FTIR and XRD. The results of tensile properties showed that the tensile strength and modulus reached their highest values at the CNTs/Fe₃O₄ loading content of 1 wt % and both were greatly enhanced after heat treatment. Electrical conductivity of the polymer was dramatically enhanced at the low loading level of CNTs/Fe₃O₄; the electrical percolation of was in the range of 5∼8 wt % of CNTs/Fe₃O₄. The magnetic study showed that the saturation magnetization (M_s) of PEN/CNTs/Fe₃O₄ nanocomposites increased with the increase of CNTs/Fe₃O₄ loading content, and the coercive force (H_c) of the nanocomposite was independent of the CNTs/Fe₃O₄ content. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Fabrication and properties of MgF<Subscript>2</Subscript> composite film modified with carbon nanotubes

Carbon nanotubes (CNTs) were used to modify magnesium fluoride (MgF₂) film via the spin coating technique. Nanoparticles of MgF₂ were in situ synthesized on surfaces of CNTs resulted in the composites (MgF₂–CNTs) by means of sol–gel technique. The sizes of the MgF₂ nanoparticles in situ synthesized on CNTs surfaces could be modulated by processing the MgF₂ sol–gel in different ways. The MgF₂–CNTs as prepared was mixed with MgF₂ sol to fabricate composite films (MgF₂–CNTs/MgF₂). Instead of adding directly CNTs, adding MgF₂–CNTs, into MgF₂ sol could effectively improve the dispersion of CNTs, avoid emergence of carbon clusters in the compsite film, decrease surface roughness of the film, and enhance the interaction between the CNTs and MgF₂ matrix. In the paper, the MgF₂ nanoparticles were in situ synthesized on the surfaces of multi-walled carbon nanotubes (MWCNTs) and single-walled carbon nanotubes (SWCNTs) respectively to prepare MgF₂–SWCNTs/MgF₂ and MgF₂–MWCNTs/MgF₂ composite films. Experimental results showed that the transparency of the MgF₂–SWCNTs/MgF₂ composite film was higher than that of the MgF₂–MWCNTs/MgF₂ film in the range of ultraviolet, visible and near-infrared wavelengths. The results showed SWCNTS could be an ideal reinforcement of MgF₂ films to get good toughness, and retain its optical transmittance at the same time.     

Sensitive electrochemical immunoassay for chlorpyrifos by using flake-like Fe3O4 modified carbon nanotubes as the enhanced multienzyme label

A highly sensitive electrochemical immunoassay of chlorpyrifos (CPF) was developed by using a biocompatible quinone-rich polydopamine nanospheres modified glass carbon electrode as the sensor platform and multi-horseradish peroxidase-flake like Fe₃O₄ coated carbon nanotube nanocomposites as the signal label. Due to the quinone-rich polydopamine nanospheres, the platform exhibited excellent fixing capacity by simple coating of sticky polydopamine nanospheres and subsequent oxidization. By coprecipitation of Fe³⁺ and Fe²⁺ on polydopamine modified carbon nanotubes (CNTs) with the aid of ethylene glycol (EG), the flake-like Fe₃O₄ coated CNTs (CNTs@f-Fe₃O₄) were synthesized and chosen as the carrier of multi-enzyme label due to the high loading of secondary antibody (Ab₂) and horseradish peroxidase (HRP) and also the peroxidase-mimic activity of Fe₃O₄. Under the optimum conditions, the immunosensor can detect CPF over a wide range with a detection limit of 6.3 pg/mL. Besides, the high specificity, reproducibility and stability of the proposed immunosensor were also proved. The preliminary application in real sample showed good recoveries, indicating it holds promise for fast analysis of CPF in aquatic environment.     

Ultrasonic synthesis of polyaniline nanotubes containing Fe3O4 nanoparticles

Polyaniline (PANI) nanotubes containing Fe₃O₄ nanoparticles were synthesized under ultrasonic irradiation of the aqueous solutions of aniline, ammonium peroxydisulfate (APS), phosphoric acid (H₃PO₄), and the quantitative amount of Fe₃O₄. It was found that the obtained samples had the morphologies of nanotubes. TEM images and selected area electronic diffractions showed that Fe₃O₄ nanoparticles were embedded in PANI nanotubes. We thought that the mechanism of the formation of PANI/Fe₃O₄ nanotubes could be attributed to the ultrasonic irradiation and the H₃PO₄-aniline salt template. The molecular structure of PANI/Fe₃O₄ nanotubes were characterized by Fourier transform infrared spectroscopy (FTIR), UV-vis absorption spectra and X-ray diffraction (XRD). The conductivity and magnetic properties of the PANI nanotubes containing Fe₃O₄ nanoparticles were also investigated.     

Facile synthesis of multifunctional multiwalled carbon nanotubes/Fe3O4 nanoparticles/polyaniline composite nanotubes

With an average diameter of 100-150 nm, composite nanotubes of polyaniline (PANI)/multiwalled carbon nanotubes (MWNTs) containing Fe₃O₄ nanoparticles (NPs) were synthesized by a two-step method. First, we synthesized monodispersed Fe₃O₄ NPs (d=17.6 nm, σ=1.92 nm) on the surface of MWNTs and then decorated the nanocomposites with a PANI layer via a self-assembly method. SEM and TEM images indicated that the obtained samples had the morphologies of nanotubes. The molecular structure and composition of MWNTs/Fe₃O₄ NPs/PANI nanotubes were characterized by Fourier transform infrared spectra (FTIR), energy dispersive X-ray spectrometry (EDX), X-ray photoelectron spectra (XPS), X-ray diffraction (XRD) and Raman spectra. UV-vis spectra confirmed the existence of PANI and its response to acid and alkali. As a multifunctional material, the conductivity and magnetic properties of MWNTs/Fe₃O₄ NPs/PANI composites nanotubes were also investigated.     

Fabrication and characterization of CdSe conjugated magnetic carbon nanotubes: A promise of targeted and visualized drug delivery

A novel cancer drug targeting carrier (CdSe@Fe₃O₄/CNTs) was prepared by using chitosan to encapsulate magnetic carbon nanotubes (Fe₃O₄/CNTs), and then combining Fe₃O₄/CNTs to CdSe with amidolink. In this system, chitosan was used as a bridge to link CdSe and magnetic CNTs, which improved the stability of the entirety; CdSe was linked up with chitosan using covalent bond steadily and kept a good fluorescence. A mechanism scheme was proposed to illustrate the formation process of the nanocomposites. The as-synthesized samples were characterized by transmission electron microscopy (TEM), X-ray diffractometry (XRD), vibration sample magnetometry (VSM) and fluorescence spectra. Results showed that the novel carrier has the potential to meet the specific needs in cancer in vivo imaging and targeted cancer therapy.     

Facile one‐step synthesis of electromagnetic functionalized polypyrrole/Fe3O4 nanotubes via a self‐assembly process

This article reports a simple self‐assembly process for facile one‐step synthesis of novel electromagnetic functionalized polypyrrole (PPy)/Fe₃O₄ composite nanotubes using p‐toluenesulfonic acid (p‐TSA) as the dopant and FeCl₃ as the oxidant. The key trick of the present method is to use FeCl₃ as the oxidant for both PPy and Fe₃O₄ in the same time to synthesize PPy/Fe₃O₄ composite nanotubes in one‐step. This facile one‐step method is much simpler than the conventional approach using the Fe₃O₄ nanoparticles as the additives. Compared to the similar composites synthesized using the conventional method, the as‐prepared PPy‐p‐TSA/Fe₃O₄ composite nanotubes using the facile one‐step self‐assembly process show much higher room‐temperature conductivity. Moreover, the composite nanotubes display interesting ferromagnetic behavior. The electrical properties of the PPy‐p‐TSA/Fe₃O₄ composite nanotubes are dominated by the amount of FeCl₃ while their magnetic properties are controlled by the amount of FeCl₂. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 320–326, 2010     

Magnetic assembled electrochemical platform using Fe2O3 filled carbon nanotubes and enzyme

A novel electrochemical nanostructured biosensor based on carbon nanotubes (CNTs) has been constructed by magnetic assembly method. The magnetic multi-walled carbon nanotubes (M-MWNTs) were prepared by introducing Fe₂O₃ nanoparticles into the nanotubes. Thus the multilayered functional platform could be assembled with the aid of magnetic field. The horseradish peroxidase (HRP) was employed as a model enzyme to demonstrate the final performance of the nanostructured biosensor. SEM, UV–vis spectroscopy and electrochemical techniques were used for characterization of assembly process. The resulting three-dimensional M-MWNTs/HRP multilayer films have showed satisfactory stability, biocompatibility and electrochemical properties.     

The study of carbon nanotubes as conductive additives of cathode in lithium ion batteries

Carbon nanotubes (CNTs), including multi-walled CNTs (MWCNTs) and single-walled CNTs (SWCNTs), are employed as conductive additives in lithium ion batteries. The effects of MWCNTs’ carbon precursors, diameter, and weight fraction on the electrochemical behavior of MWCNTs/LiCoO₂ composite cathode are investigated. Meanwhile, a comparison is made between SWCNTs /LiCoO₂ and MWCNTs/LiCoO₂. Among the three kinds of carbon precursors: CH₄, natural gas, and C₂H₂, MWCNTs prepared from CH₄ are very fit for acting as conductive additives due to their better crystallinity and lower electrical resistance. MWCNTs with smaller diameter favor improving the electrochemical behavior of MWCNTs/LiCoO₂ composite cathode at higher charge/discharge rate owing to their advantage in primary particle number in unit mass. To make full use of LiCoO₂ at higher rate, it is necessary to add at least 5 wt.% of MWCNTs with a diameter 10~30 nm. However, SWCNTs are not expected to be added into LiCoO₂ composite cathode since they tend to form bundles.     

Synthesis and Catalytic Activity of Magnetic Cryptomelane-Type Manganese Oxide Nanotubes

Magnetic cryptomelane-type manganese oxide (OMS-2) nanotubes were successfully prepared by grafting Fe₃O₄ nanoparticles onto the OMS-2 nanotubes. SEM and HRTEM images show that the prepared magnetic OMS-2 nanotubes exhibited diameters of 100?nm, lengths less than 3.0???m, and the diameters of the Fe₃O₄ nanoparticles are less than 10?nm. The synthesized material exhibits excellent magnetic separation and catalytic properties for the degradation of methylene blue (MB) by a Fenton-like reaction.