Molecular design of a “molecular syringe” mimic for metal cations using a 1,3‐alternate calix[4]arene cavity

The chemically switchable actions well imitate the function of a “molecular syringe,” has been studied in theory using the 1,3‐alternate calix [4]arene bearing a nitrogen‐containing crown cap at one side and a bis(ethoxyethoxy) group at another side by the π‐basic calixtube as a pipette and the crown ring as a rubber cap. The model is characterized by geometry optimization using density functional theory (DFT) at B3LYP/6‐31G level. The obtained optimized structures are used to perform natural bond orbital (NBO) and frequency analysis. The electron‐donating heteroatoms: O and N offer lone pair electrons to the contacting RY* (1‐center Rydberg) or LP* (1‐center valence antibond lone pair) orbitals of K⁺, Ag⁺. The results indicate that when the nitrogen atom in the crown ring is protonated, K⁺ and Ag⁺ will be pushed out to the bis(ethoxyethoxy) side through a π‐basic calixtube. When the nitrogen·H⁺ in the crown ring is deprotonated, K⁺ and Ag⁺ are sucked back to the crown‐capped side again. In the course of the coordination, both the intermolecular electrostatic interactions and the cation‐π interactions between the metal ion and π‐orbitals of the two pairs facing inverted benzene rings play a significant role. It is believed that this prototype of a “molecular syringe” is a novel molecular architecture for the action of metal cations. © 2010 Wiley Periodicals, Inc. J Comput Chem 2010     

Oligomeric calix[4]arene‐thiacrown ether for toxic heavy metals

A new oligomeric calix[4]arene‐thiacrown‐4 ( 5 ) was synthesized via a condensation reaction of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐bis‐(4‐aminobenzyloxy)‐calix[4]arene‐thiacrown‐4 ( 4 ) with adipoyl dichloride. In this oligomerization reaction only five/six calix[4]arene‐thiacrown‐4 units were linked in the oligomeric chain. The complexation studies of 5 were made with liquid–liquid‐ extraction and solid–liquid‐sorption procedures. For comparison, the extraction efficiencies of monomers 1 , 3 , and 4 to selected transition metals are reported. The selectivity of monomers 3 and 4 toward Cu²⁺, Hg²⁺, and Pb²⁺ was lost after oligomerization in the two‐phase extraction systems. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 186–193, 2004     

Theoretical study on conformational features and cation-binding properties of a diquinone calix[4]arene

Theoretical studies of a diquinone calix[4]arene and its interactions with the cations Li⁺, Na⁺, K⁺ and Ag⁺ have been performed. Conformational features and cation-binding properties were evaluated with the restricted hybrid Becke three-parameter exchange functional method using the 6-31G(d) basis set and its relativistic effective core potentials. To model the effect of medium, the polarisable continuum model was also used. Four typical conformations of the parent diquinone calix[4]arene were studied. The calculated results show that the most stable conformers are 1,3-alternate and partial cone in the gas phase and in CH₂Cl₂ solution, respectively. The optimised geometric structures were used to perform natural bond orbital analysis. The two main types of driving force metal–ligand and cation–π interactions are investigated. The calculated binding energy for cations (Li⁺, Na⁺, K⁺ and Ag⁺) is discussed. The calculated results indicate that cone complexes are the most stable.     

Synthesis of a calix[4]crown modified with germanium‐containing side chains

A germacalix‐crown, 25,27‐bis[1‐(3‐trimethylgermylpropyl)oxy]calix[4]arene‐crown‐6, 1,3‐alternate ( 1a ), and its carbon analog, 25,27‐bis‐[1‐(4,4‐dimethylpentyl)oxy]calix[4]arene‐crown‐6, 1,3‐alternate ( 1b ), were prepared and their structures were confirmed by elemental analysis and ¹H and ¹³C NMR spectroscopy. A cation transport test indicated that both compounds exhibited much the same cation transport ability, so that the role of the germanium moiety in capturing and transporting counteranions is not yet clear. Copyright © 2005 John Wiley & Sons, Ltd.     

Facilitated Transfer of Alkali and Alkaline‐Earth Metal Ions by a Calix[4]arene Derivative Across Water/1,2‐Dichloroethane Microinterface: Amperometric Detection of Ca2+

The host–guest complexation reactions between 5,11,17,23‐tetra‐tert‐butyl‐25,27‐diethoxycarbonylmethoxy‐26,28‐dimethoxy calix[4]arene (BDDC4) and alkali and alkaline‐earth metal ions were investigated by facilitated ion transfer processes across water/1,2‐dichloroethane microinterface by using steady‐state cyclic voltammetry and differential pulse voltammetry. The obtained facilitated transfers for Li⁺, Na⁺, K⁺, Rb⁺ and Ca²⁺ were evaluated under the different experimental conditions, at the excess concentrations of metal ions with respect to BDDC4 and vice versa. The association constants having 1 : 1 stoichiometry for Li⁺, Na⁺, K⁺ and Rb⁺ in 1,2‐DCE were determined. Also, we demonstrated that BDDC4 can play an important role for the development of highly selective chemical sensor for Ca²⁺ among alkaline‐metal ions in the concentration range of 0.1–1.0 mM in aqueous solution.     

Synthesis of a Tweezer—like Bis（Phenylthiapropoxy）calix[4]—arene as a Cation／π Enhanced Sensor for Ion—Selective Electrodes

Two novel 25,27-dihydroxy-26,28-bis(3-phenylthiapropxy)-calix[4]arene(3) and 25,27-dihydroxy-26,28-bis(3-phenylthiapropoxy)-5,11,17,23-tetra-tert-butylcalix[4] arene (4) were synthesized for the evaluation of their ion-selectivity in ion-selective electrodes(ISEs).ISEs based on 3 and 4 as neutral ionophores were prepared,and their selectivity coefficients for Ag^ (lg KAg,M^pot)were investigated against other alkali metal,alkaline-earth metal,aluminum,thallium(Ⅰ）,Lead and some transition metal ions using the separate solution method (SSM).These ISEs showed excellent Ag^ seletivity over most of the interfering cations examined,except for Hg^2 and Fe^2 having relative smaller interference(lg KAg,M^pot≤-2.1).     

Complexation of alkali metal cations by calix[4]Arene-bis-crown-6 in methanol,acetonitrile and propylene carbonate

Résumé The interactions of Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺ with the double-crown calix, calix[4]arene-bis-crown-6, have been studied in methanol, acetonitrile, and propylene carbonate at 25°C using precise conductivity measurements. For Li⁺ and Na⁺ in solutions containing this calix[4]arene, only 1:1 cation:ligand complexes are formed which permit the determination of the thermodynamic complexation formation constants,K _f. The conductivity data strongly suggest that 2:1 cationcalixarene complexes form with K⁺, Rb⁺, and Cs⁺. The existence of 2:1 complexes was experimentally confirmed for the potassium systems by a mass spectroscopic method.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Synthesis and Rh(I)‐catalyzed polymerization of 1,3‐diphenylyne–calix[4]arene compounds: Novel conjugated,calixarene‐based polymers

The synthesis of two 1,3‐bis(4‐ethynylbenzyloxy)calix[4]arenes, 5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 1 ) and 25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 2 ), was accomplished through Sonogashira coupling of appropriate calixarene derivatives. Methods for the polymerization of these bifunctional building blocks with Rh(I) as a catalyst, leading ultimately to conjugated polymers having calix[4]arene units incorporated into the main chain, were explored. Calixarenes 1 and 2 were efficiently polymerized with rhodium‐based initiators and afforded the conjugated polymers poly{5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene} ( poly 1 ) and poly{25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene}. Depending on the conditions, high conversions and good yields were obtained. The effects of adding cocatalysts (NHEt₂ and/or PPh₃) were studied in connection with the number‐average molecular weight and the molecular weight distribution of the resultant polymer ( poly 1 ) and tentatively correlated with the formation of low‐molecular‐weight materials. A catalytic system containing triphenylphosphine as the sole additive ([Rh(nbd)Cl]₂; [Rh]/[PPh₃] = 0.5) proved to be the best for the polymerization of p‐tert‐butylcalixarene compound 1 . Linear polymers having high number‐average molecular weights (up to 1.1 × 10⁵ g mol^?1) with low polydispersities were produced under these conditions. For debutylated homologue 2 , its polymerization was best carried out in the absence of any added cocatalyst. A cyclopolymerization route, comprising the intramolecular ring closing of the calix[4]arene pendant ethynyl groups followed by an intermolecular propagation step, is advanced to explain the results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7054–7070, 2006     

Synthesis and cation binding properties of fluorescent calix[4]arene derivatives bearing tryptophan units at the lower rim

The fluorescent peptidocalixarenes, 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(O-methyl-l-tryptophanylcarbonylmethoxy)calix[4]arene (1) and 5,11,17,23-tetra-tert-butyl-25,27-di(O-methyl)-26,28-bis(O-methyl-l-tryptophanylcarbonylmethoxy)calix[4]arene (2), were prepared by introducing tryptophan subunits at a lower calixarene rim. Coordination abilities of 1 and 2 towards Eu(III) and alkali metal cations were studied by spectrophotometric, spectrofluorimetric, conductometric and potentiometric titrations in acetonitrile at 25°C. Rather strong complexation was observed for smaller alkali metal cations Li⁺ and Na⁺ (log K _Li1 >6, log K _Li2 >6, log K _Na1  = 8.25, log K _Na2  = 6.94), and moderate for K⁺ (log K _K1  = 5.09, log K _K2  = 4.09). Larger Rb⁺ and Cs⁺ cations did not fit in the ion binding site of 1 so no complexation was detected, whereas the more flexible ligand 2 accommodated Rb⁺ cation (log K _Rb2  = 3.44). The fluorescence of 1 (λ_ex = 280 nm, λ_em = 340 nm) was remarkably quenched by Eu(III). Stability constant of 1:1 (Eu³⁺:1) complex determined spectrofluorimetrically amounted to log K _Eu1  = 6.16.     

Quantum simulation on donor and acceptor II calix[4]arene substrate and alkali metal ions: the driven inclusion

The energetic and structural optimized of a calix[4]arene with and without alkali-metal cations are presented with performance of various quantum chemical methods such as Hartree--Fock, second order Møller-Plesset perturbation theory, and density functional theory. The geometry optimizations have been carried out with the 3-21G (Li⁺--Cs⁺) and 3-21G(d,p) (Li⁺--K⁺) and the 3-21G basis sets for Cs⁺ and Rb⁺. Additional single-point energy ab initio calculations for Li⁺–K⁺ were carried out at HF/6--31G, HF/6-31G (d,p), HF/6--311G(d,p) for complexes of Li⁺ and Na⁺. The calculations were carried out to analyze the complexation of calix[4]arene with alkali metal cationic species (Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺). Assumption to isolate the effects of the aromatic core and cation-π interactions. Particular emphasis has been on conformational binding selectivity and the structural characterization of the complexes, the smaller cation as Li⁺ and Na⁺ has been placed in the lower rim's of the calix[4]arene's cavity. The large cations like K⁺, Rb⁺, and Cs⁺ take placed in upper rim and the endo (inclusive) complexation is driven by cation-π interactions, that reflect a superior interaction with two phenol rings. The endo complexation of Cs⁺ with calix[4]arene is in agreement with X-ray diffraction data. The binding modes of calixarene-cation systems are studied to involve cooperative effects between cation-π and electrostatic forces.     

Liquid chromatographic behavior of two alanine‐substituted calix[4]arene‐bonded silica gel stationary phases

Two new kinds of alanine‐substituted calix[4]arene stationary phases of 5,11,17,23‐p‐tert‐butyl‐25,27‐bis(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐26,28‐dihyroxycalix[4]arene‐bonded silica gel stationary phase (BABS4) and 5, 11, 17, 23‐p‐tert‐butyl‐25,26,27,28‐tetra(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐calix[4]arene‐bonded silica gel stationary phase (TABS4) were prepared and characterized in the present study. They were compared with each other and investigated in terms of their chromatographic performance by using polycyclic aromatic hydrocarbons, disubstituted benzene isomers, and mono‐substituted benzenes as solute probes. The results indicated that both BABS4 and TABS4 exhibited multiple interactions with analytes. In addition, the commonly used Tanaka characterization protocol for the evaluation of commercially available stationary phases was applied to evaluate the properties of these two new functionalized calixarene stationary phases. The Tanaka test results were compared with Zorbax Eclipse XDB C₁₈ and Kromasil phenyl columns, respectively. BABS4 has stronger hydrogen‐bonding capacity and ion‐exchange capacity than TABS4, and features weaker hydrophobicity and hydrophobic selectivity. Both of them behave similarly in stereoselectivity. Both BABS4 and TABS4 are weaker than C₁₈ and phenyl stationary phases in hydrophobicity and hydrophobic selectivity.     

Synthesis and electrochemical properties of calix[4]arene derivatives containing ferrocene units in the cone and 1,3-alternate conformation

Two novel calix[4]arene receptors containing ferrocene units in cone (L₁) and 1,3-alternate (L₂) conformations have been synthesized from 25,27-dihydroxy-26,28-bis[(3-aminopropyl)oxy]calix[4]arene 4 or 25,26,27,28-tetra[(3-aminopropyl)oxy]calix[4]arene 6 and ferrocenecarboxaldehyde via condensation, respectively. Their structures have been characterized by ¹H, ¹³C, APT, COSY NMR, FTIR, HSMR, and UV–vis spectral data. The electrochemical behavior of L₁ and L₂ has been investigated in the presence of F^?, Cl^?, Br^?, H₂PO₄^?, CH₃COO^? anions. Electrochemical studies show that these receptors electrochemically recognize CH₃COO^?, H₂PO₄^?, and Cl^?, anions. Using an UV–vis study, the selectivity to these anions in DMSO solution was confirmed.     

Silver(I)‐Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene

A new PVC membrane potentiometric sensor for Ag(I) ion based on a recently synthesized calix[4]arene compound of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dihydroxy‐calix[4]arene‐thiacrown‐4 is developed. The electrode exhibits a Nernstian response for Ag(I) ions over a wide concentration range (1.0×10^?2?1.0×10^?6 M) with a slope of 53.8±1.6 mV per decade. It has a relatively fast response time (5–10 s) and can be used for at least 2 months without any considerable divergence in potentials. The proposed electrode shows high selectivity towards Ag⁺ ions over Pb²⁺, Cd²⁺, Co²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Mg²⁺, Ca²⁺, Li⁺, K⁺, Na⁺, NH₄⁺ ions and can be used in a pH range of 2–6. Only interference of Hg²⁺ is found. It is successfully used as an indicator electrode in potentiometric titration of a mixture of chloride, bromide and iodide ions.     

Molecular Design of Calixarene 5. Syntheses and Cation Selectivities of Novel Schiff's Base p‐tert‐Butylcalix[4]arenes

Five novel Schiff's bases p‐tert‐butylcalix[4]arenes have been synthesized in high yields by the reaction of 1,3‐distally disubstituted p‐tert‐butylcalix[4]arene amine (1) with the corresponding aromatic aldehydes, and their cation binding abilities and selectivities with alkali and heavy metal ions have been evaluated by solvent extraction of aqueous metal picrates to show the highest Ag⁺ extractability for Schiff's base p‐tert‐butylcalix[4]arene (6) and the best Na⁺/Li⁺ and Ag⁺/Ti⁺ selectivities for Schiff's base p‐tert‐butylcalix[4]arene (4 and 2) over any other calix[4]arene derivatives, respectively.     

Novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer: Design,synthesis, and properties

A novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer ( CALIX‐PPE ) has been successfully synthesized by cross‐coupling polymerization of bis‐calix[4]arene 1 with 1,4‐diethynylbenzene. The polycondensation was carried out in toluene/NEt₃ at 35 °C for 24 h, using PdCl₂(PPh₃)₂/CuI as the catalytic system, furnishing CALIX‐PPE in excellent isolated yields (higher than 95%, several runs). The yellow polymer is freely soluble in several nonprotic organic solvents. The GPC trace of the isolated polymer showed a monomodal distribution and a number‐average molecular weight of 23,300 g mol^?1 (M_w/M_n = 2.05). No evidence was found in the structural analysis (FTIR and ¹H/¹³C NMR) regarding the formation of alkyne homocoupled segments along the polymer chain. For comparative purposes, the synthesis of an analogous poly(p‐phenylene ethynylene) containing p‐t‐butyl‐phenoxymethyl side chains ( TBP‐PPE ) was also undertaken. A great similarity was found between the photophysical properties of CALIX‐PPE and TBP‐PPE in solution (UV–vis and laser induced luminescence), clearly demonstrating their unique dependence on the structure and conformation of the conjugated PPE backbone. The fluorescence spectra of polymers are of nearly identical shape, displaying their maximum emission around 420 nm. The calculated solution photoluminescence quantum yields of CALIX‐PPE and TBP‐PPE are of similar magnitude (?_{F( CALIX‐PPE )} = 0.43; ?_{F( TBP‐PPE )} = 0.51). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6477–6488, 2008     

Syntheses and Properties of New Pendant‐armed Calix[4]arene Derivatives as Cesium Selective Ionophore

Two new pendant‐armed calix[4]arene derivatives 5 and 6 have been synthesized. The study of alkali metal picrates extraction indicates that both compounds show preference of cesium cation, compound 6 in 1,3‐alternate conformation has better extractibility for Cs⁺ than compound 5. The coordination behavior of compound 6 with cesium cation was studied by ¹H NMR spectroscopy. The Cs⁺ selective electrode based on compound 6 exhibits a linear, near Nernstian response characteristics, the slope is 56.4 mV/decade in me concentration range of 10^?4—10^?1 mol/L, the selectivity coefficient (logK^pot_Cs.Na) is ?3.39.     

Chiral calix[4]azacrowns for enantiomeric recognition of amino acid derivatives

In this study the synthesis of novel chiral calix[4]azacrown derivatives has been reported. The enantioselectivity of chiral receptors was investigated by using UV-vis spectroscopy. All the chiral calix[4]arene derivatives exhibited certain chiral recognition toward the enantiomers of phenylalanine (Phe-OMe·HCl) and alanine methyl ester hydrochlorides (Ala-OMe·HCl). As a chiral receptor, the furfuryl-armed calix[4]azacrown ether 7 has the best enantiomeric discriminating ability for α-amino acid ester hydrochlorides (up to K_L/K_D=2.08, ΔΔG₀=−1.82 kJ mol⁻¹) in CHCl₃. The enantiomeric recognition abilities for guests are also discussed from a thermodynamic point of view.     

Synthesis of Flavin–Calix[4]arene Conjugate Derivatives

The synthesis of two new flavin substituted calix[4]arene derivatives, 9 and 10 , is described. The first flavin substituted calix[4]arene derivative 9 was synthesized by the reaction of 3‐methylalloxazine ( 5 ) with 25,27‐bis(3‐bromopropoxy)‐26,28‐dihydroxy‐5,11,17,23‐tetra(tert‐butyl)calix[4]arene ( 4 ) in high yield (92%). The other derivative 10 was prepared from 3‐methylalloxazine‐1‐acetic acid ( 7 ) and 25,27‐bis(3‐cyanopropoxy)calix[4]arene ( 3 ). All new compounds were characterized by a combination of FT‐IR and ¹H‐NMR spectroscopy, and elemental‐analysis techniques.